Beli Mesin Pemotong Bor Ganda Dengan Pengeboran bekas (78.149)

Kondisi: siap digunakan (bekas), Uciosarko - the U2PRW drilling machine is designed for processing strips and furniture fronts made of solid wood or MDF. The machine operates in semi-automatic cycle mode. In a single cycle, the machine performs: cutting at a specified angle (within a 45–90 degree range) and drilling on the mitered surface or the edge of the workpiece. – Manufactured in Poland TECHNICAL SPECIFICATIONS: - Max. height of cut material: 60 mm - Max. width of cut material at 45°: 70 mm - Max. width of cut material at 90°: 150 mm - Max. length of cut material: 2200 mm - Min. length of cut material at 45°: 455 mm - Main saw blade diameter: 250 or 300 mm - Scoring blade diameter: 100 mm - Max. lower milling cutter diameter: 35 mm - Max. depth of lower milling: 15 mm - Mounting diameter for face drills and lower milling cutter: 10 mm Drilling head (face drilling): - Spindles: 4 - Axial spacing of spindles: 32; 32; 40 mm - Spindle array: linear - Max. face drilling depth: 60 mm - Installed power: 7 kW - Operating pressure: 0.6 MPa - Dimensions (length/width/height): 4300 / 1600 / 1570 mm Processing Assemblies The device is equipped with two processing assemblies: the left assembly, which is fixed, and the right assembly – movable. Each assembly consists of the following main units: main saw unit, scoring saw, drilling unit for drilling on the mitered surface, and drilling unit for drilling underneath the workpiece. Lower hole drilling unit This unit is installed optionally. It is used for processing corner strips for adjustable-width door frames. It performs a blind drilling (not through-hole), typically for cup hinges. The attached picture shows a mounted red cover, which serves as a bed for the processed angle strips as well as a cover with chip extraction. Nledpfx Aeq Ii Dlea Ueb Workpiece clamping The machine is also equipped with a dual-plane clamping system incorporating both horizontal and vertical clamps. The horizontal clamps are responsible for pressing the workpiece against the vertical reference points and straightening it, while the vertical clamps immobilize the piece during processing. Horizontal clamping is always activated before vertical clamping. Control system The machine's control system is user-friendly, intuitive, and functional. It allows individual activation or deactivation of all processing units, with separate controls for the left and right sides. All main units have independent drives. The right processing assembly is positioned by pressing the corresponding control buttons on the control panel. The actuation mechanism is a gear system with an electric motor driving a trapezoidal screw. The electronic US-control system with operator panel and digital readout is used to read and set the length of the workpiece. This system also automatically adjusts the length counter readout when changing between 45° and 90° cutting angles. Additionally, it is responsible for automatic referencing.

Kondisi: bekas, Tahun pembuatan: 1985, nomor mesin/kendaraan: 5801, de-plate-drilling-fdb600 Nodpfjibq Itsx Aa Ujlb

Kondisi: baik (bekas), Tahun pembuatan: 2005, Panjang pemotongan maks.: 6.000 mm Panjang pemotongan minimum: 335 mm Nedoyz Aa Aspfx Aa Uslb Diameter pisau gergaji maks.: 550 mm Posisi panjang otomatis melalui kontrol E 255 Putar ke dalam dan luar 22,5° - 90° - 140° Miringkan sudut antara 45 dan 90 derajat Tampilan sudut digital Rel rol pengikut Kondisi baik

Kondisi: baik (bekas), Tahun pembuatan: 1992, Fungsionalitas: berfungsi sepenuhnya, mesin bor deret ganda GANNER dengan masing-masing 21 spindle Nledpfxoxlt T Ss Aa Uob

Kondisi: hampir baru (bekas), Tahun pembuatan: 2003, Fungsionalitas: berfungsi sepenuhnya, daya: 2,5 kW (3,40 hp), tegangan masuk: 400 V, frekuensi input: 50 Hz, jenis arus masuk: AC (pendingin udara), lebar total: 24.000 mm, panjang total: 52.000 mm, tinggi total: 10.500 mm, berat keseluruhan: 2.000 kg, tekanan udara: 6 batang, sambungan udara terkompresi: 6 batang, diameter bor: 180 mm, tinggi kerja: 1.050 mm, de Nljdpfx Aaerg E Hce Ujb

Kondisi: bekas, Tahun pembuatan: 1999, diameter mata gergaji: 500 mm, panjang total: 6.500 mm, lebar total: 1.500 mm, tinggi total: 1.500 mm, berat keseluruhan: 1.000 kg, lubang pisau gergaji: 30 mm, kebutuhan tinggi: 1.500 mm, Emmegi gergaji ganda untuk pemotongan miring Nledpfsy Stp Ajx Aa Ujb

Kondisi: baru, 1 Nljdpfxjy I Dcle Aa Ujb

Kondisi: baru, Arbeitslänge 355 - 4010 mm Working length: 355 - 4010 mm Arbeitshöhe bei 90° = 315 mm Working height at 90°: 315 mm Schwenkbar 45°/90°/45° 0 Swivable 45°/90°/45° 0 Gewicht 2050 kg Weight: 2050 kg Nledpfxsy I Dcfe Aa Usb Schnitthöhe bei 45° 230 mm Cutting height at 45°: 230 mm Hecht Wegoma Doppelgehrungssäge DS150 Hecht Wegoma Double Mitre Saw DS150 Universelle Doppelgehrungssäge für PVC, Aluminium & Holz Universal double mitre saw for PVC, aluminium & wood ----- Technical manufacturer description: Pos. 1: DS 150 with 550 mm saw blade diameter hydropneumatic saw feed pneumatic swivel 45°/90°/45° 2 carbide-tipped saw blades 550 x 80 mm left head fixed, right head movable, prepared for positioning control. Pos. 2: Positioning control EPS 220 for double mitre saws Including EPS220 control for precise length positioning. With industrial 15-inch touch panel (dust and splash water protected) Display for manual entry of cutting data or by data set integration - Ethernet connection 10/100 (TCP/IP) - USB interface - Data transfer possible via USB or network. - Interface to measuring stick including interface software. Including control cabinet, motor and software licenses. - Short and long cut facility (can be activated together with protective fence or mechanical stop) - Automatic cutting (can be software activated only in combination with access protection) Pos. 3: Positioning electronics for stepless automatic swiveling from 22.5°-135° with sensor query of actual position and head clamping on both sides ----- Price for the above-mentioned machine on request! ----- (Technical data according to manufacturer - without guarantee!) All prices quoted are net, plus statutory VAT.

Kondisi: baru, en-001 Nedpfxoy I Db Us Aa Ujlb

Kondisi: sangat baik (bekas), Tahun pembuatan: 2008, Fungsionalitas: berfungsi sepenuhnya, panjang pemotongan (maks.): 6.000 mm, panjang total: 7.500 mm, lebar total: 1.500 mm, tinggi total: 2.000 mm, Data teknis - Elumatec DG 244/2 tahun produksi 2008 Unit kontrol Model: E555 - layar sentuh Nsdpfx Asyv E N Asa Uelb Keunggulan teknis mesin: - Diameter pisau potong: 550 mm - Kecepatan putaran pisau: 2800 rpm - Suplai udara bertekanan: 7 bar - Berat: 2300 kg Mesin sepenuhnya berfungsi, dapat diuji di lokasi. Harga termasuk pemuatan. Kami juga dapat membantu pengiriman ke alamat yang ditentukan. Mesin berada di Polandia – 33350. Pemeriksaan dapat dilakukan dengan janji temu sebelumnya. Perusahaan kami berlokasi 120 km dari bandara Krakow (KRK). Pengiriman memungkinkan. Harga untuk ekspor.

Kondisi: bekas, Machines for Export from Company Liquidation Stock No. 62506 = RAPID Double Mitre Saw, Type DGL 5000 / 500 = Approx. weight: 1,200 kg = Special price: EUR 1,800 Stock No. 54183 = MÜLLER Hydraulic Press, 10 ton, without hydraulic pump = Approx. weight: 1,200 kg = Special price: EUR 1,000 Stock No. 57780 = MÜLLER Hydraulic Press, Type HEP 40 = Approx. weight: 2,200 kg = Special price: EUR 1,900 Hydraulic Press - Hydraulic Power Unit external = Approx. weight: 3,000 kg Stock No. 60507 = WEBO Drilling Machine with 4 heads = Approx. weight: 1,900 kg = EUR 1,600 Stock No. 57592 = ALZMETALL Drilling Machine with 2 heads = Approx. weight: 1,700 kg = EUR 1,200 Nodpfxsy Erzds Aa Uslb Stock No. 60699 = WEBO Pillar Drilling Machine MK5 = Weight: 1,600 kg = Special price: EUR 1,600 Stock No. 60177 = WEBO Radial Drilling Machine Type R4bR = Approx. weight: 2,800 kg = Special price: EUR 1,900 Stock No. 57432 = GILDEMEISTER Type GD 160 = Approx. weight: 4,000 kg = Special price: EUR 1,900 --- Many more machines for export available immediately. For example: 10 units Welding Machines CLOOS, ESS, etc. 2x HITACHI SEIKI CNC Lathes

Kondisi: baru, Tahun pembuatan: 2022, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 20221346, tegangan masuk: 400 V, Operasi senyap Versi besi cor berat Akurasi pemotongan tinggi karena operasi tanpa getaran Pemandu mata gergaji dengan bantalan bola Kelas EMV C2 Rantai pengaman dua saluran dengan mekanisme berhenti cepat dalam keadaan darurat Sikat serbuk sisa Mikrosakelar untuk batas otomatis Tombol tekan - Pengoperasian pita gergaji manual - tuas tangan menghidupkan dan mematikan operasi pita gergaji Nsdpfxjyx S Dfe Aa Ujlb Dilengkapi standar dengan pita gergaji bi-logam berkualitas tinggi Pembatas material dengan skala Pencekam cepat yang dapat diatur menggunakan roda tangan. Penjepitan benda kerja dengan tuas penjepit cepat yang praktis Badan mesin yang stabil Pembatas akhir dapat disesuaikan secara derajat Kecepatan mata gergaji dapat disesuaikan tanpa langkah dari 15 - 90 m/menit Penyayatan miter ganda Meja putar: Sudut apa pun di antara 45° dan -60° dapat dipotong karena celah pemotongan berputar bersama lengan gergaji

Kondisi: sangat baik (bekas), nomor mesin/kendaraan: 85039, Model: 371 Nedpfsth U E Esx Aa Uolb Equipment / Additional information: Maximum diameter: 15 mm Distance between the drills: 60–120 mm

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, panjang pemotongan efektif 5000 mm diameter pisau 500 mm kemiringan kepala elektronik kemiringan dalam/luar dari 22°30′ hingga 135° Nodpfx Aaoy Dva Ij Uelb opsi pemotongan bertahap mesin pelabel

Kondisi: bekas, Tahun pembuatan: 2003, bekas, kondisi baik Mesin telah dibersihkan, dilumasi, sebagian direkondisi. Berbagai suku cadang aus telah diganti. Uji coba operasi dengan pengaturan. Merek: Rapid Tipe: DGS 200 Tahun pembuatan: 2003 No. Seri: 404 Telah diuji sesuai standar CE Motor: 2 x 2,2 kW Lebar potong: 4000 mm Kedalaman potong: 130 x 140 - 100 x 230 - 60 x 270 mm Tinggi potong maks.: 280 x 50 mm Diameter mata pisau maks.: 420 mm Dapat dimiringkan secara manual 45° Maju linier secara pneumatis Indikator digital untuk panjang potong 4 x penjepit pneumatis benda kerja - 2 x horizontal, 2 x vertikal Silinder horizontal: 2 Silinder vertikal: 2 Kebutuhan ruang sekitar 5100 mm x 1180 mm x 1280 mm Berat sekitar 800 kg Nledoyclxpopfx Aa Uob Lokasi penyimpanan: 97447 Gerolzhofen, bebas muat, tanpa kemasan Penyerahan dalam kondisi seperti dilihat, tanpa garansi dan jaminan.

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1982, elumatec-doppelgehrungssaege-e200-2024 Nodpfsy Hk Thex Aa Ujlb

Tahun pembuatan: 2008, Kondisi: siap digunakan (bekas), Fungsionalitas: berfungsi sepenuhnya, model controller: E555 Touchscreen, berat keseluruhan: 2.300 kg, panjang pemotongan (maks.): 6.000 mm, diameter mata gergaji: 550 mm, kecepatan rotasi (maks.): 2.800 rpm, RINCIAN TEKNIS Panjang potong (maks.): 6000 mm Diameter pisau: 550 mm Kecepatan putaran pisau: 2800 rpm DETAIL MESIN Nljdpfsy Egahsx Aa Ujb Kontrol: E555 Layar Sentuh Pasokan udara tekan: 7 bar Dimensi & Berat Dimensi (P x L x T): 7500 x 1500 x 2000 mm Berat: 2.300 kg

Kondisi: bekas, Tahun pembuatan: 2006, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 04631037, panjang pemotongan (maks.): 6.000 mm, Elumatec DG 104 Double Mitre Saw (Year of Manufacture: 2006) – Precision Aluminium Processing For sale is a used Elumatec DG 104 double mitre saw from the year 2006. This machine is specifically designed for the precise processing of aluminium and plastic profiles, making it ideal for use in window, door, and façade manufacturing. Technical Highlights: - Saw units can swivel to both sides for accurate mitre cuts - Suitable for double mitre cuts from 45° to 90° - Robust machine construction ensures minimal vibration during operation - Pneumatic material clamping guarantees secure holding of the workpieces - High cutting precision and repeatability - Intuitive operation Equipment: - 2 saw units - Pneumatic clamping device - Length stop - Cooling/spraying unit Condition: The machine is in used, fully functional condition. Normal signs of use are present but do not affect functionality. Area of Application: Ideal for metal fabrication businesses, window manufacturers, and workshops that value precise and efficient mitre cutting. Miscellaneous: Inspection by appointment possible. Loading support can be provided if required. Nljdpfx Asyvrq Toa Ueb All specifications subject to change. Sale subject to prior sale.

Kondisi: baik (bekas), Tahun pembuatan: 1988, Gergaji potong ganda Düspohl DGK 400 B Nomor stok: 001071 Gergaji potong ganda Düspohl Tipe: DGV 400 B Tahun pembuatan: 1988 Pisau gergaji dapat diputar Panjang potongan maks.: 2500 mm Nsdpfx Aeyv R Nzsa Uslb Tinggi potongan ± 70 mm Diameter pisau maks.: ± 300 mm Digunakan untuk kusen pintu Daya motor: 4 kW Lokasi: dari gudang 54634 Bitburg - tersedia segera -

Kondisi: baik (bekas), Pillar drilling machine, column drilling machine, upright drilling machine, multi-spindle head, multi-spindle drilling head, drilling gearbox - with twin-spindle drilling head by Sigloch Schrieder, type: V602 - Drive power: 1.02/0.88 kW - Adjustable drill spacing: 18-110 mm - Max. drill diameter: 2x Ø 6 mm - Table size: 275 mm - Spindle taper: MK3 - Throat depth: 220 mm - Speed range: 100-2900 rpm - Columns: Ø 100 mm - Spindle stroke: 75 mm Nedpfx Aajc Rpnne Uolb - Gearbox - Dimensions: 900/400/H1910 mm - Weight: 230 kg

Kondisi: baik (bekas), Tahun pembuatan: 2013, Mesin gergaji potong sudut ganda untuk aluminium Mata gergaji dapat diputar dan diatur kemiringannya. Kontrol E355 Termasuk mata gergaji lingkaran dan sistem ekstraksi debu Data teknis: Panjang potong minimum pada 90°: 375 mm Panjang potong maksimum: 4500 mm Sudut putar ke dalam secara pneumatik 90° - 45° (manual hingga 22,5° ke dalam dan hingga 140° ke luar dengan display digital) Sudut kemiringan ke dalam secara pneumatik 90° - 45° (Sudut antara diatur manual dengan display digital dan Nodeyw R Rzopfx Aa Uolb stop revolver) Diameter mata gergaji: 550 mm Kecepatan putar mata gergaji: 2250 1/menit. Daya keluar per motor: 4 kW Dimensi: ±5790 / 1840 / 1985 mm Berat ±: 2110 kg

Kondisi: bekas, Mesin Pemotong Gergaji Kepala Ganda - Tekna TK 154 Spesifikasi teknis: * Mata gergaji: Ø 500 mm * Panjang potong maksimum: 4000 mm * Kemiringan mata gergaji: eksternal * Sudut kemiringan: 90°/22,5 kw * Tegangan: 380 volt * Daya: 7 HP * Dimensi: 5200 x 1650 x t 1700 (maks 2100) * Berat: 1260 kg Gerakan otomatis: * Pergerakan kepala (bergerak) untuk penentuan panjang potong * Kemiringan 90° (sudut antara dilakukan manual) Njdpfoxbr Itjx Aa Ujlb

Kondisi: baru, Tahun pembuatan: 2026, Comparable to e.g. Emmegi Double mitre saw for steel Cutting length: 5000 mm With 7 NC axes for length positioning, tilting of saw blades outward and inward, feed of saw blades, and variable speed control of saw motors Torsion-resistant welded steel frame with linear rail guidance in longitudinal direction 2 x saw motors, each 4.5 kW Saw blade speed: 0 – 250 rpm Saw blade feed motorized, from rear to front Infinitely variable feed rate Motorized angle adjustment, between 135° and 45° For use with HSS circular saw blades Ø 400 mm Pneumatic safety hoods Water cooling system with pump and coolant tank Left saw unit fixed on the machine base, right unit motorized and movable Positioning accuracy ± 0.15 mm Max. traverse speed: 25 m/min Length positioning with consideration of cutting angle and profile height Each saw head equipped with three horizontal and vertical profile clamps; in the event of pressure drop, the horizontal cylinders remain clamped Material support between saw heads, pneumatically pivotable 15” touchscreen Processing of single cuts Processing of cutting lists Creation of cutting lists via keyboard Import of cutting lists via USB flash drive or network Corner mitre cutting Overlength cuts Short cuts from 5 mm cut length Nsdpfx Aeyinu Hea Uslb Cross-cuts Available options: Micro-spray lubrication system Saw unit inward tilt increased up to 150° Label printer Barcode reader Additional network connection and teleservice contract

Kondisi: bekas, Tahun pembuatan: 2000, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 258882, panjang pemotongan (maks.): 6.000 mm, diameter mata gergaji: 500 mm, panjang total: 7.550 mm, lebar total: 1.700 mm, tinggi total: 1.740 mm, jenis arus masuk: AC (pendingin udara), tegangan masuk: 400 V, berat keseluruhan: 1.450 kg, Mesin ini bekas dan dalam kondisi baik. Nlodpfeyt Sf Rsx Aa Ujb

Kondisi: sangat baik (bekas), Tahun pembuatan: 2013, - Alat Ø 500 mm - Kecepatan putaran pisau 2800 rpm - Berat sekitar 1500 kg Nlodpfxex N R H To Aa Ujb