Beli Mesin Pengecoran Aluminium bekas (78.496)

Tahun pembuatan: 1998, Kondisi: bekas, Long-cut saw for cutting aluminium profiles with feed pusher, in very good condition. Max. cutting length: 700 mm Max. cutting height: 130 mm Max. saw blade diameter: 450 mm Kjdswx I Hvepfx Aciedn Maximum feed pusher stroke: 6,200 mm The machine is currently dismantled and stored in our warehouse. Further technical data available on request.

Tahun pembuatan: 2008, Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 17-K-4, Paket lengkap terdiri dari: 1 x MTT 5/04 VARIO 17-K-4 (berfungsi) 1 x MTT 5/04 VARIO 17-K-4 (sebagai donor suku cadang) 2 x Lemari Oven Pengering Sirkulasi Udara VGO 710 SR Dijual satu set lengkap sistem vacuum casting yang terdiri dari satu unit mesin vacuum casting MTT tipe 5/04 VARIO 17-K-4 yang berfungsi, satu unit mesin identik sebagai donor suku cadang, serta dua buah lemari oven pengering sirkulasi udara VGO 710 SR. Deskripsi Unit Mesin vacuum casting MTT yang ditawarkan digunakan untuk produksi komponen presisi dan seri kecil menggunakan proses vacuum casting. Mesin utama dalam kondisi operasional. Satu unit mesin identik tambahan disertakan sebagai donor suku cadang. Lingkup Pengiriman - 1x Mesin vacuum casting MTT 5/04 VARIO 17-K-4 (beroperasi) - 1x Mesin vacuum casting MTT 5/04 VARIO 17-K-4 (donor suku cadang) - 2x Lemari oven pengering sirkulasi udara VGO 710 SR - Aksesori dan perlengkapan lain sesuai dengan foto Kondisi Standar industri bekas. Unit utama masih beroperasi saat dilepas. Tanda-tanda pemakaian sesuai usia dan penggunaan terlihat. Inspeksi dapat dilakukan dengan perjanjian. Penjualan hanya sebagai satu paket lengkap. Unit dijual ex-site. Pembongkaran, pemuatan, pengambilan, dan transportasi menjadi tanggung jawab serta biaya pembeli sepenuhnya. Kdodpfx Aezd Am Eecisn

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, Foundry inventory Recently added: Eirich R09 Electric power: 25 kW Batch size: 150 kg Capacity: 4 t/h Complete inventory of the sand casting foundry in Venlo-Lomm, Netherlands Moulding line: HWS, type SFM2 30 moulds/hour, hopper mill Control: S7 Including sand preparation with Webac 66B, water dosing by Datec Core shooter: Röper H6.5 - H16 hydraulic, S7 control Core sand mixing plant by Klein, cold-box mixer on rails for up to 4 machines YXLON X-ray system Spectro spectral analysis system Ideco analysis device Belt grinder Hazardous materials container Drying oven Band saw Moulding machines + Near Braunschweig: Sand casting foundry HWS -HSP-2D / Box size: 840 x 650 x 250/250 mm Year of manufacture: 2000 & 2004 Sand preparation with Webac mixer 88B / batch size 1800 kg Core shooter 10-20 litres / Yr. 1999 cold-box with round mixer mounted on the machine Melting furnaces Belt grinder You are warmly invited to view the foundry. Kodpfxevz Apro Aciodn Machines and items are sold in used condition. The seller excludes any warranties.

Tahun pembuatan: 2009, Kondisi: bekas, The machine is connected to power and can be inspected by appointment! Technical Data / Machine Components: Year of manufacture: 12/2009 Make: PRESSTA-EISELE Voltage: 400 V Rated current: 19.2 A Operating pressure: 250 bar Dimensions: approx. 18–20 m long, approx. 3 m wide Kedpfx Aezbac Tscijdn Weight, unpacked: 4.5 to 5 t Horizontal Loading Magazine: 5-strand toothed belt conveyor, toothed belt width 32 mm, with teeth on the running side 17 compartments, each 90 mm wide, for holding profiles, with carrier 40 x 10 mm (H x W) 2 sliding supports between the toothed belts as additional support Max. depth: 2,380 mm, length: 7,400 mm Max. loading weight: 1,000 kg Conveying length: 1,850 mm Minimum profile length: 1,000 mm Maximum profile length: 7,300 mm Common drive via geared motor: 0.55 kW, 400 V, 50 Hz Conveying speed: 4 m/min Material stop left 'Magazine empty' sensor, manual step Touch switch for initial loading 5 pneumatic cylinders for aligning profiles in the longitudinal direction 6 lifting rollers for raising the profile from the loading magazine and transferring to the pusher Pusher, electronically positionable feed system: Reinforced design Max. feed length: 9,000 mm Mounted on the right side of the machine Profile feed from right to left Guide profile with linear guide rail Carriage plate construction with recirculating ball bearings Drive via linear motor, positioning via magnetic tape Pneumatic material gripper All 8 profiles can be automatically clamped without manual adjustment Repeat accuracy: +/- 0.15 mm Max. rapid traverse speed: 180 m/min Input of the profile tube length in the control system 1 light barrier for detecting the profile start before the first punching head Punching Unit: Hydraulic drive Punching force per cylinder: 3.0 t, designed for 55 punches per minute Maximum of 2 tools in operation Vertical punching head with 2 cylinders Punching stroke 15 mm, incl. 2 punching tools for Ø 6.5 mm holes, 65 mm pitch Punching cylinders can be individually actuated, guide for profile 2 horizontal punching heads Punching stroke 15 mm, each incl. 1 punching tool for Ø 6.5 mm hole and 1 punching tool for slotted hole 7 x 12 mm, guide for profile Cycle spray unit with 4 nozzles for punch lubrication 3 l oil tank, fill level monitoring Saw: Drive 5.5 kW, 400 V, 50 Hz Saw blade Ø 500 mm Saw feed pneumatic with hydraulic control, from below Pneumatic profile clamping device vertical and horizontal Cycle spray unit with one nozzle Flap after the saw for removal of cut-offs and residual pieces, max. length 200 mm Parts fall down into the provided container Longer residual pieces are disposed of together with good parts Dot Peen Marking System: Marking size 2 – 7 mm Marking window 80 x 20 mm, 15 characters incl. spaces Marking always approx. 190 mm after the saw cut Data transfer from an Excel file via interface Each profile can have a different designation

Tahun pembuatan: 2004, Kondisi: bekas, de982b7c Kedpexn Iq Defx Aciodn

Tahun pembuatan: 2008, jam operasional: 21.330 h, Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 1013813, Kami menawarkan mesin shot blasting bekas Wheelabrator HB 10/12 untuk komponen cor, tahun pembuatan 2008. Produsen: Wheelabrator Tipe: HB 10/12 Nomor seri: 103813 Tahun produksi: 2008 Tegangan nominal: 3 x 400 V Daya nominal: 20 kW Frekuensi nominal: 50 Hz Arus nominal: 40 A Berat modul utama: 4.500 kg (sesuai gambar), bagian tambahan diperkirakan 3.000 kg. Instalasi terdiri dari blok-blok berikut: - Kabin blasting sebagai elemen utama - Instalasi crane di depan - Pagar pengaman - Elevator ember Peralatan dapat dibongkar menjadi 4 unit ini. Dokumentasi lengkap, seperti diagram kelistrikan, gambar teknis, dan manual pengoperasian tersedia dalam bahasa Jerman. Gambar dengan dimensi lihat pada PDF. Seri foto juga terlampir dalam format PDF. Kdedpfx Acszc H Hbeion Kami juga memiliki video, silakan hubungi kami untuk mendapatkan akses. Pembongkaran peralatan harus dilakukan oleh pembeli. Jika Anda memiliki pertanyaan atau membutuhkan informasi lebih lanjut, silakan kirim pesan atau hubungi kami.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2015, jenis arus masuk: tiga fasa, tinggi total: 2.000 mm, lebar total: 2.800 mm, panjang total: 7.500 mm, kapasitas tangki: 900 l, gaya penjepit: 400 kN, Zhenli ZLC400T – Cold Chamber Die Casting Machine 400 T For sale: high-quality Zhenli ZLC400T cold chamber die casting machine for aluminum, year of manufacture 2015. The machine has only been used occasionally, is in excellent technical condition, regularly serviced, and ready for immediate operation. Key technical specifications: - Clamping force: 400 tons (4000 kN) - Closing stroke: 450 mm - Ejector force: 220 kN - Ejector stroke: 120 mm - Tie bar spacing: 620 × 620 mm - Platen size: 1120 × 1000 mm - Tie bar diameter: 130 mm - Die thickness: 300–800 mm - Injection stroke: 570 mm - Plunger diameters: Ø60 / Ø70 / Ø80 mm - Maximum aluminum shot weight: up to 6.9 kg - Injection intensification force: 480 kN - Casting area: 275 / 375 / 490 cm² - Chamber flange diameter: 101.6 mm - Plunger extension: 220 mm - Hydraulic motor power: 22 kW - Working pressure: 14 MPa - Oil tank capacity: 900 l - Machine weight: 17 tons - External dimensions: 7.5 × 2.0 × 2.8 m Advantages: ✔ Ideal for medium and large aluminum castings ✔ Robust design and high rigidity of the clamping unit ✔ Large mounting space for molds ✔ Low wear level – machine rarely used ✔ Ready to work without extra investment Kdodpfx Ajzcay Iscisn Applications: This machine is perfect for the production of: - Automotive components - Household appliance parts - Industrial enclosures - Machinery and equipment parts - Technical aluminum castings Condition: Excellent The machine can be inspected under power.

Kondisi: bekas, Tahun pembuatan: 1994, jenis arus masuk: tiga fasa, Perlengkapan: dokumentasi / manual, DE20240619_Wohr_1994Mixer Kedpfxezb Eh Uj Acijdn

Kondisi: baru, Tahun pembuatan: 2026, Production time approx. 4-5 months --- Our best-selling briquetting press series + Proven, straightforward technology for extremely low failure rates + 25 years of experience, continuous development, and know-how + Several hundred machines in operation with satisfied customers + Excellent price-performance ratio The hydraulic briquetting presses of the MPP NEM series compact materials such as aluminium, copper, brass, bronze, graphite, and other non-ferrous metals into dimensionally stable cylindrical briquettes. These machines are characterised by a robust construction, ensuring consistent briquette quality during continuous operation. The compaction process is performed without the addition of binding agents, relying solely on hydraulic pressure. Depending on the material, the volume of the input material can be reduced by up to 90%. The standard hopper has a volume of approximately 0.5 m³. Hoppers with larger capacities or special containers for installation beneath existing extraction and filter systems as complete disposal units are also available. Depending on specific customer requirements, MPP NEM single units can be combined to create a complete system. The press’s chip container can be loaded manually, by conveyor belt, via extraction system, or with a tipping skip. For systems designed for fully automated operation, it is advisable to use a lift-tipping device in combination with a crusher. The MPP NEM series briquetting presses are designed for the production of briquettes from homogeneous material. The length of each briquette is 40 to 75 mm depending on the model, and the diameter, according to type, is 50, 65, or 70 mm. For emulsion recovery, the briquetting press can be equipped with a collection tray, allowing coolant, cutting fluids, and lubricants to be collected and recovered. Non-ferrous metal chips up to approximately 20 mm in length are loaded into the storage hopper. A stirrer at the bottom of the hopper prevents material bridging and feeds material into the pre-compaction chamber. In this chamber, a hydraulic slide pre-compacts the material and pushes it into the press block. The main press cylinder then compacts the material against a vertical slide until the set pressing pressure is reached. The vertical cylinder then moves up, and the stable briquette is ejected. Briquette production offers the following advantages: • Reduction of material volume by up to 90% • Emulsion recovery • Cost savings in storage and transportation • Economical disposal • Profitable resale -- Briquetting Press NEM 300 Throughput capacity: up to approx. 200 kg per hour *heavily dependent on material type. - On the last test with aluminium granulate under 5 mm – approx. 186 kg per hour + the recovered emulsion. - On the last test with aluminium shavings under 18 mm – approx. 120 kg per hour + the recovered emulsion. Kdodpfx Acechqxxjion Technical data: Motor: 7.5 kW (+ 0.55 kW for cooler) 400 Volt / 50 Hz / 3-phase Front bushing: 125 mm Max. briquette stroke: 100 mm Opt. briquette stroke: 80 mm Pump: 80 litres Storage hopper: approx. 0.5 m³ capacity (expandable)

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 2023, en-001 Kdodpfx Aed N Dnhocijn

Kondisi: bekas, Tahun pembuatan: 2013, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 2123083B, tinggi total: 560 mm, lebar total: 500 mm, panjang total: 580 mm, tegangan masuk: 230 V, suhu: 1.600 °C, arus masuk: 25 A, frekuensi input: 50 Hz, berat keseluruhan: 65 kg, Profesionální indukční licí stroj Schultheiss VPC 040 Power, vyrobený v Německu. Výkonná kompaktní stolní jednotka určená pro výrobu vysoce kvalitních, detailních odlitků ze zlata, stříbra a dalších slitin drahých kovů. Verze "Power" nabízí zvýšenou kapacitu a rychlejší pracovní cykly oproti standardnímu modelu. Disponuje plně automatizovaným systémem aplikace vakua a tlaku stiskem jediného tlačítka, což zajišťuje výjimečnou homogenitu slitiny a minimální poréznost výsledných výrobků. Hlavní vlastnosti: - Plně automatické ovládání: 12stupňové digitální programy odlévání pro konzistentní výsledky. - Pokročilá indukční technologie: Rychlé a šetrné ohřevy s efektem míchání. - Jednofázový provoz: Funguje na běžné napětí 230 V. - Univerzální využití: Zvládá jemné filigránové detaily i větší masivní odlitky. Technická specifikace: - Výrobce: Schultheiss GmbH (Německo) - Typ: VPC 040 Power - Rok výroby: 2013 - Sériové číslo: 2123083B - Max. teplota: až 1 600 °C - Max. rozměr formy: Ø 100 mm x 120 mm - Výkon: 5 kVA / 25 A (jednofázově, 230 V) Kedpfxey Tbfzs Acisdn - Rozměry: 500 x 580 x 560 mm - Stav: Použité, vizuálně vynikající a čisté. Na zadní straně porty pro přívod/odvod vody, vakuum a tlakový plyn.

Kondisi: siap digunakan (bekas), Aluminium-Formmaschine Kedewvqmmjpfx Acisdn Lagernummer: 2002578BXM

Kondisi: baik (bekas), Tahun pembuatan: 1960, Fungsionalitas: berfungsi sepenuhnya, jenis arus masuk: AC (pendingin udara), Schmelzofen, 1960 - KF Lichtbogenofen_AC EAF 8 Tonnen, 4 MW - Nennkapazität 8,0 t, Produktionsausstoß lag zwischen 6,0 und 10,0 t - Leistungstransformator 4 MW Die Gießerei Karhula verfügt über zwei Formanlagen sowie Handformung für Großgussteile. Unsere Schmelzkapazität umfasst einen 8-Tonnen-Lichtbogenofen sowie Induktionsöfen mit 8 t, 1,5 t und 0,5 t. Für die Metallbehandlung steht ein 8-Tonnen-AOD (Argon-Sauerstoff-Entkohlung)-Konverter zur Verfügung. Kdodpevampgefx Acisn

Kondisi: bekas, THERMAL BREAK STRIP INSERTER/DEVICE FOR INSERTING THERMAL BARS INTO PROFILES Machine designed for inserting plastic bars into the grooves of aluminium profiles. The feed system consists of four motorised rollers to prevent the bars from jamming during insertion. Kdsdpfx Ajy Idxmscien The AS 242 L thermal break bar insertion device is engineered to efficiently insert plastic thermal barrier strips into aluminium profiles, ensuring smooth feeding, precise alignment, and reduced cycle times. No. 2 motors, 0.75 kW – 400 V – 50 Hz Operating pressure: 7 bar Bar feed speed: 100 m/min Bar guide stroke: transverse 7–256 mm, vertical 0.5–140 mm Working capacity (bar height): Min. 10 mm – Max. 60 mm Automatic ejection of bar tails Button for partial insertion of bars into the lower profile Transverse adjustment of the bar guide is made via a single control equipped with a decimal position indicator. Vertical adjustment of the bar guide is via two independent controls, each with a decimal position indicator. Bar stop can be excluded via push button control Machine dimensions: 1020 mm (width) x 825 mm (depth) x 1400 mm (height) Machine weight: 235 kg

Kondisi: baik (bekas), Tahun pembuatan: 2013, Profile processing center Axes travel paths X-axis: 7430 mm Y-axis: 1320 mm Z-axis: 500 mm A-axis: +/-90° Kodpfx Asvy E Ibjciedn Working areas X-axis: 7460 mm Y-axis: 650 mm Z-axis: 250 mm 8 clamping elements Automatic tool magazine with 8 slots in a protected housing, suitable for drilling, milling, and tapping tools, angle heads and disc cutters, max. Ø 200 mm, plus 2 slots for 2 angle heads Tool holder: ISO 30 In pendulum operation (2-zone machining), the working stroke per zone is limited to 3500 mm.

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, diameter mata gergaji: 300 mm, panjang total: 405 mm, lebar total: 90 mm, tinggi total: 125 mm, berat keseluruhan: 500 kg, OMGA TR2 twin-blade crosscut saw for wood and aluminium – fully serviced, ready for operation Specification: • Condition: Used, after comprehensive technical maintenance • Manufacturer: OMGA Kjdpfx Acoy Dpxdjijdn • Model: TR2 • Main motors: 2 x 2.2 HP (3,000 rpm) • Pneumatic head control • Max cutting length: 320 cm • Min cutting length: 15 cm • Max cutting section: 85x140 mm (at 90°) • Max blade diameter: 300 mm • Mitre cutting range: -45° to +45° (left/right) • 3 operating modes • Vertical workpiece clamps • Weight: approx. 500 kg • Dimensions (L x W x H): 405 x 90 x 125 cm Additional information: • The machine is in good technical condition and ready for immediate use • The photos show the actual item for sale • On-site inspection and testing available • The auction price is net (excludes VAT and transport costs) Financing and transport: • We organize transport using MDD fleet, courier services, or external carriers • Financing available – leasing or lease loan options possible

Tahun pembuatan: 2005, Kondisi: siap digunakan (bekas), en-001 Kdjdoyzkifjpfx Acien

Kondisi: baru, Tahun pembuatan: 2026, Pres pneumatik untuk pembuatan aluminium, berbagai alur, punching, dan pengeboran melalui piston yang dapat diatur ketinggiannya dan pengoperasian melalui pedal kaki. Kekuatan kerja maksimum 3000 kg pada 8 Atm. Tekanan pneumatik 6-8 atm Jarak kerja 260 mm Stroke kerja 0-35 mm Ukuran kemasan 500 x 320 mm Kecepatan piston 23 mm/dtk Kjdpspa Nw Ssfx Aciodn Perkiraan konsumsi udara per siklus 25 liter Dimensi meja 530x340 mm Ketinggian bebas 260 mm Stroke yang dapat disetel dari 0 hingga 35 mm OPSIONAL: Kabinet putar / alas KEMASAN DAN DIMENSI: 600 x 490 x 600 (86 kg) Kemasan standar dengan peti kayu Kami menantikan pesan Anda! Plantec Maschinen GmbH

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Kemiringan bilah: -45° / +45°. Bukaan maksimum ragum: 180 mm Panjang tidak lagi dapat diumpankan: 385 mm Kodpfxex Hw Sqs Acisdn Dimensi cakram: 350 mm Kecepatan putar bilah: 1700 / 3400 rpm - 2 kecepatan

Kondisi: bekas, Mitre saw for aluminium (custom machine engineering with 4 servo motors) Circular saw, mitre saw, longitudinal cutting saw Year of manufacture: 2002 Saw blade diameter: 500 mm Cutting range at 90° - Round: Ø 180 mm Kdjdpfxjdzp T Ds Acion - Rectangular: 350 x 140 mm (longitudinal cut) Cutting range at 45° - Round: Ø 180 mm - Rectangular: 350 x 100 mm (longitudinal cut) Base carriage guide length: 1,100 mm Travel distance on base carriage (forward-backward): 650 mm Travel distance on column (up-down): 120 mm Saw blade speed: approx. 3,000 rpm Motor power: 2.2 kW Electrical connection: 400 V, 50 Hz - Controlled longitudinal feed movement - Controlled saw blade height adjustment - Controlled mitre cuts by pivoting saw unit - Controlled mitre cuts by tilting saw unit - Saw pivoting and tilting via INDRAMAT servo motors with precision gearboxes (Motor types: MKDO71B-061-KG1-KN and MKDO41B-144-KP1-KN) - Vertical axis movement via INDRAMAT servo motors and ball screw spindles (Motor type: MKDO41B-144-KP1-KN) - A total of 4 Indramat servo motors installed - High-quality German machine engineering Space requirements (L x W x H): 1,150 x 1,100 x 1,400 mm Weight: approx. 360 kg Good condition The unit comes from a special-purpose machine for specific products. All other components and electrical parts for building a new custom machine are also available.

Kondisi: siap digunakan (bekas), Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2000, Device for dispensing pastes, jams, meats, cheeses, etc., into aluminum and plastic cups, including an aluminum lid sealing machine and a date printer. Kdedpew Dqmvjfx Acisn

Tahun pembuatan: 2017, Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, Překlad: Lis byl v provozu od 3/2017 do roku 2022, kdy byl odborně demontován. Je uskladněn ve střeženém skladu v Kirově, Rusko. Lis byl provozován maximálně 6 dní v týdnu ve dvousměnném provozu. Na tomto lisu bylo vyrobeno více než 60 000 velkých umyvadel. Cena: 280 000 EUR. Vlastníkem lisu je společnost Dřevojas, Česká republika. Pořizovací cena nového stroje byla 456 000 EUR. Kdsdport Tw Dofx Acion Rozměry: Šířka: ~4920 mm Délka: ~14020 mm Výška: ~3085 mm Hmotnost: ~45 t (pojezdový vozík na produkty a formy nejsou součástí dodávky) Maximální rozměr formy: 1000 mm x 1700 mm x 650 mm Maximální počet forem: 8 horizontálních nebo 12 vertikálních Energie: 380 V Vzduch: 16 bar Voda (45°C): min. 4 bar Voda (70°C): 3–4 bar

Kondisi: bekas, Tahun pembuatan: 2004, nomor mesin/kendaraan: M275603, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 6.200 mm, Emmegi, Twin Electra Sun TU/6 CNC gergaji mitra kepala ganda. Panjang pemotongan: 6200 mm. Pisau: 500 mm. Kedpfx Aexrg R Rocijdn

Kondisi: baik (bekas), Tahun pembuatan: 2008, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 527, Harga untuk mesin: 214.500 EUR Harga untuk alat: 97.500 EUR Kdedpfx Aou Ivc Necien

Kondisi: baik (bekas), Tahun pembuatan: 1984, nomor mesin/kendaraan: 102335, 23172 Kodormkl Aspfx Acisdn