Beli Monti Mesin Bor bekas (78.250)

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2014, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 3.000 mm, tinggi benda kerja (maks.): 30 mm, RINCIAN TEKNIS Sumbu: 920 mm Sumbu X: 3.000 mm Ljdpfozkt A Rjx Al Nsrp Sumbu A: 360° Ketebalan material Z: 12 mm - 30 mm Kecepatan umpan: 20 m/menit Dimensi minimum (pelat): X: 300 mm Y: 120 mm Z: 12 mm Diameter lubang maksimum/minimum: 3 mm - 35 mm Kedalaman pemotongan maksimum dengan mata gergaji: 10 mm RINCIAN MESIN Daya motor: 0,75 HP Tegangan: 400 V Daya hisap yang diperlukan: 2.300 m³/jam PERLENGKAPAN Chuck bor dengan 4 posisi Mata gergaji pada arah X

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2003, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: M01.16.21.51.02, jarak pergerakan sumbu X: 1.600 mm, jarak lintasan sumbu Y: 1.200 mm, jarak gerak sumbu Z: 500 mm, kecepatan spindel (maks.): 10.000 rpm, Tidak ada harga minimum – penjualan dijamin dengan penawaran tertinggi! Lodpfx Aljznkpvo Nerp RINCIAN TEKNIS Jarak gerakan sumbu X: 1.600 mm Jarak gerakan sumbu Y: 1.200 mm Jarak gerakan sumbu Z: 500 mm Jarak gerakan sumbu W: 1.200 mm Jarak gerakan sumbu B: 360° Kecepatan spindel: 10.000 RPM Daya motor spindel: 30kW Penggerak umpan: Motor servo AC tanpa sikat Kecepatan umpan: 0–20.000 mm/menit Kecepatan cepat sumbu X: 20.000 mm/menit Kecepatan cepat sumbu Y dan Z: 20.000 mm/menit Mode manual: 20.000 mm/menit Mode pengaturan: 0–2.000 mm/menit Ukuran meja: 1.500 × 1.500 mm Alur-T: 5 × DIN 650-22 H12 Jarak alur-T: 150 mm RINCIAN MESIN Penyangga perkakas: Hidraulik Koneksi listrik: 400 V Frekuensi: 50 Hz Tekanan kerja udara bertekanan: 6 bar Laju aliran nominal: 7.000 RPM

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, diameter pemasangan: 10 mm, kecepatan spindel (min.): 6.000 rpm, kecepatan spindel (maks.): 12.000 rpm, panjang meja: 1.130 mm, lebar meja: 250 mm, pl-hu-001 Lsdpfx Aox Npimol Nsrp

Kondisi: siap digunakan (bekas), Uciosarko - the U2PRW drilling machine is designed for processing strips and furniture fronts made of solid wood or MDF. The machine operates in semi-automatic cycle mode. In a single cycle, the machine performs: cutting at a specified angle (within a 45–90 degree range) and drilling on the mitered surface or the edge of the workpiece. – Manufactured in Poland TECHNICAL SPECIFICATIONS: - Max. height of cut material: 60 mm - Max. width of cut material at 45°: 70 mm - Max. width of cut material at 90°: 150 mm - Max. length of cut material: 2200 mm - Min. length of cut material at 45°: 455 mm - Main saw blade diameter: 250 or 300 mm - Scoring blade diameter: 100 mm - Max. lower milling cutter diameter: 35 mm - Max. depth of lower milling: 15 mm - Mounting diameter for face drills and lower milling cutter: 10 mm Drilling head (face drilling): - Spindles: 4 - Axial spacing of spindles: 32; 32; 40 mm - Spindle array: linear - Max. face drilling depth: 60 mm - Installed power: 7 kW - Operating pressure: 0.6 MPa - Dimensions (length/width/height): 4300 / 1600 / 1570 mm Processing Assemblies The device is equipped with two processing assemblies: the left assembly, which is fixed, and the right assembly – movable. Each assembly consists of the following main units: main saw unit, scoring saw, drilling unit for drilling on the mitered surface, and drilling unit for drilling underneath the workpiece. Lower hole drilling unit This unit is installed optionally. It is used for processing corner strips for adjustable-width door frames. It performs a blind drilling (not through-hole), typically for cup hinges. The attached picture shows a mounted red cover, which serves as a bed for the processed angle strips as well as a cover with chip extraction. Workpiece clamping The machine is also equipped with a dual-plane clamping system incorporating both horizontal and vertical clamps. The horizontal clamps are responsible for pressing the workpiece against the vertical reference points and straightening it, while the vertical clamps immobilize the piece during processing. Horizontal clamping is always activated before vertical clamping. Control system Lsdpfxeq Ii Dls Al Njrp The machine's control system is user-friendly, intuitive, and functional. It allows individual activation or deactivation of all processing units, with separate controls for the left and right sides. All main units have independent drives. The right processing assembly is positioned by pressing the corresponding control buttons on the control panel. The actuation mechanism is a gear system with an electric motor driving a trapezoidal screw. The electronic US-control system with operator panel and digital readout is used to read and set the length of the workpiece. This system also automatically adjusts the length counter readout when changing between 45° and 90° cutting angles. Additionally, it is responsible for automatic referencing.

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Mesin bor untuk komponen yang diputar, TRIADE FR3 S Jumlah unit pengeboran: 3 1. Bagian bawah: 3 kW 2. Bagian atas: 1,5 kW 3. Bagian bawah: 1,1 kW (dapat digunakan untuk memasang mur/sekrup) Penjepit material pneumatik Aplikasi: pengeboran kaki, komponen yang diputar, komponen rangka Lrsdpfxsznmlyj Al Nep Berat: 1200 kg Dimensi: 115x128x180 cm (T)

Kondisi: bekas, Mesin bekas Lrodjw I Unwopfx Al Njp Mesin bor lubang deret bekas merek Ganner tipe RB 107 No. mesin: 121627 Daya motor: 1,5 kW Kecepatan motor: 2800 rpm 1 balok bor dengan 26 spindel, jarak sumbu 32 mm 3 penahan benda kerja 1 saklar kaki Ketersediaan: segera Lokasi: Röllbach

Kondisi: bekas, Tahun pembuatan: 1993, Mesin bekas Tahun pembuatan: 1993 Perlengkapan dan data teknis: Chuck bor 2-rahang hingga Ø tangkai 20 mm Penyesuaian posisi pneumatik pada 2 level 0-100 mm Kedalaman bor maksimum 150 mm Rel raster presisi 12 mm Kunci tengah dan penyesuaian melintang Lrsdpfsw I Uy Tsx Al Nep 2 silinder penjepit pengaman pneumatik Motor 1,5 kW Kecepatan 2800 rpm Perangkat bor lubang panjang dapat diturunkan dengan 2 cam program Berat mesin sekitar 310 kg Ukuran mesin (P x L x T) 1100 x 1100 x 1500 mm (tanpa penyangga) Ketersediaan: segera Lokasi: Röllbach

Kondisi: baik (bekas), nagel-citoborma-290ab-paper-drill-de Lrsdpfx Alezmu E Ee Njp

Kondisi: baik (bekas), Nagel Citoborma 480AB Mesin Bor Kertas Mesin ini dalam kondisi sangat baik. Memiliki empat kepala bor. Spesifikasi teknis: Jarak antar mata bor: 45-285 mm Diameter bor: 2-20 mm Tinggi tumpukan: 60 mm Berat: 275 kg Siklus pengeboran otomatis, dikendalikan dengan pedal kaki dan tombol manual. Konstruksi kokoh di atas pedestal. Meja bor dapat disetel di semua bidang. Lodszmu Erepfx Al Nerp Ini adalah salah satu model Citoborma terbaru. Termasuk alat kerja, instruksi, serta stik pemotong dan mata bor baru.

Kondisi: baik (bekas), Nagel Citoborma 490 Mesin Bor Kertas Ini adalah mesin bor Citoborma terbesar yang saat ini diproduksi. Kondisi sangat baik, siap untuk produksi. Mesin dilengkapi dengan 4 kepala bor. Limbah hasil pengeboran dibuang ke dalam keranjang di bagian belakang mesin. Mesin dioperasikan menggunakan pedal kaki atau tombol dua tangan. Setiap kepala memiliki pengaturan naik/turun terpisah, sehingga dapat menggunakan mata bor dengan panjang berbeda. Paket termasuk mata bor cadangan, alat, dan buku manual. Spesifikasi teknis: Jumlah kepala bor: 4 (masing-masing kepala mudah dilepas) Tinggi tumpukan maksimum: 60 mm Ukuran mata bor: 2-10 mm Jarak antar bor dapat diatur: 45 – 425 mm Lrsdpfx Alozmu Efs Nsp Dua kecepatan pengeboran Daya listrik: 380V Berat: 365 kg Dibuat di Jerman.

Kondisi: baru, Tahun pembuatan: 2023, New machine Year of manufacture: 2023 Multi-spindle universal dowel boring machine with 3 numerically controlled axes (+/- 0.1 mm) with horizontal and vertical drilling capabilities electronic adjustment of height, depth, and drilling angle (0-90°) with 7" color touchscreen, memory for up to 1000 programs with parallel stops with numeric adjustment with 21 drilling spindles (10 left, 11 right) Spindle pitch: 32 mm Max. drilling distance: 640 mm Max. tool diameter: 40 mm Max. drilling depth: 65 mm Max. horizontal drilling height: 35 mm Working height: 860 mm Max. panel thickness: 60 mm Max. panel size: 900 x 3000 mm Motor: 1.5 kW – 2800 rpm Pneumatic connection: 6/8 bar Compressed air consumption per work cycle: 5 NL Extraction nozzle: 80 mm Machine footprint: 1580 x 950 x 1400 mm Net weight: 340 kg Lrsdslk R Epopfx Al Nep Availability: short notice Location: Flörsheim

Kondisi: perlu perbaikan (bekas), Fungsionalitas: tidak berfungsi, Mesin bor untuk komponen yang diputar TRIADE FIR-6 Rusak, tidak ada pengontrol PLC. Lredpfx Alszmxf Ao Nep

Kondisi: bekas, Tahun pembuatan: 1988, Mesin bor radial Produsen: Tai Pin Tipe: TPR 1230 Tahun pembuatan: 1988 Kapasitas pengeboran pada baja: Ø 42 mm Kapasitas pengeboran pada besi cor: Ø 55 mm Pembuatan ulir (baja/besi cor): M25 / M38 Jangkauan (dari kolom hingga tengah spindel): 330 – 1.230 mm Langkah pergerakan kepala spindel: 880 mm Diameter kolom: 300 mm Pemasangan alat: MK 4 (Tirus Morse 4) Langkah pin (langkah spindel): 270 mm Kecepatan spindel: 12 tingkat, 37 – 1.253 RPM (pada 50 Hz) Pengumpanan otomatis: 3 tingkat (0,05 / 0,09 / 0,15 mm/putaran) Jarak spindel – pelat dasar: 467 – 1.360 mm Penyesuaian ketinggian lengan: 620 mm Lredpsznvibofx Al Nop 23726

Kondisi: bekas, High-Performance Drilling Machine ALZMETALL Type Abomat 20 Lrodpfx Aloikrtqo Nop Production Drilling Machine Serial No. 452 Year of manufacture: 1996 Drilling capacity in steel ST 60: 25 mm Drilling capacity in cast iron GG 20: 30 mm Spindle taper: SK 40 - M16 Throat depth: 280 mm Drilling saddle stroke: 500 mm Distance spindle nose to table: 185 - 685 mm Table size: 490 x 400 mm Spindle speed: 50 - 500 rpm, stepless Drilling saddle feed: 20 - 224 mm/min, stepless Drilling saddle rapid traverse: 4.5 m/min Feed motor power: 0.18 kW Rapid traverse motor power: 0.75 kW Drill spindle motor power: 1.1 kW (speed 1000 rpm) Connection: 400 Volt, 50 Hz - Stepless spindle speed via frequency inverter - Stepless drilling saddle feed via frequency inverter - 2 operating modes: setup and automatic mode - Centralized lubrication system - Control cabinet mounted at rear of the machine - Swiveling operator panel - Mounted on steel plate (700 x 650 x 40 mm) with precise height adjustment Required space (L x W x H): 1200 x 700 x 2530 mm Weight: approx. 1000 kg Good condition

Kondisi: bekas, Type BF 63 Spindle taper: 4MT Spindle diameter: 63 mm Spindle speed: 8–1400 rpm Lodpswrpy Rjfx Al Nerp Table size: 900 x 710 mm Drilling stroke: 560 mm Table load capacity: 2,000 kg Rotary table: 360 degrees

Kondisi: baik (bekas), Table size: 1100 x 1300 mm Travel range: 1300 x 1300 mm Ljdeh T T Aqepfx Al Njrp Spindle travel: 500 mm

Kondisi: baik (bekas), Manufacturer: MAS Type: VR 4 Lrsdpfsh Eigbsx Al Nsp Outreach: 1000 mm without table!

Kondisi: baik (bekas), 12-head drilling machine for sale, Table size: 400 x 360 mm Lrjdpepy D Dwefx Al Nsp

Kondisi: baik (bekas), Outreach: 915 mm Spindle taper: MK 3 Length: 1700 mm Width: 1,000 mm Lsded Ixy Ispfx Al Norp Height: 2000 mm Weight: 1000 kg

Kondisi: bekas, Tahun pembuatan: 2018, 1 piece CNC-controlled drilling, gluing, and dowel insertion machine GANNOMAT "INDEX 130 PRO" (with options as Index 180 Pro), 400V, 3-phase, 50Hz, complete in standard configuration with: - Support with linear guide comprising: * 1 pc. single-spindle horizontal drilling unit, 1.1 kW motor, tool speed selectable via operator software (3000/5000/8000 rpm) * 1 pc. blow-out, gluing, and reinforced dowel insertion station for Ø 8 mm dowels, dowel length 30 mm - Fully automatic, electronically controlled central lubrication - X-axis NC controlled, working length 1300 mm, max. traversing speed 78 m/min - Z-axis, position programmable via support table 5-40 mm; with option for NC-controlled Z-axis - Programmable dowel projection 7-20 mm; with option for NC-controlled Y-axis * Drilling depth 0-35 mm (with drill length 70 mm) automatically set to dowel projection - Closed gluing system: 6 bar glue pressure via glue nozzle, for glues with viscosity 150 to 350 mPas - Glue quantity steplessly adjustable via operator software - Selector switch GLUE/WATER for flushing glue system; each with 1 stainless steel container for 5 kg glue, and 5 l water - Control lamp for glue level indication in glue container - 1 pc. left side fence, 1 pc. right side fence, and 1 pc. center fence (all removable) - 4 pcs. start buttons for individual processing of 1-4 workpieces - 4 pcs. pneumatic tilting vertical clamps 10° for workpiece thickness up to max. 80 mm; workpiece length (Y) min. 70 mm - 1 pc. extraction funnel, connection Ø 80 mm - 1 pc. TCT control system with: * Built-in industrial PC, incl. Beckhoff TWINCAT Soft PLC * Operating temperature 0-50°C * 15" resistive TFT industrial touchscreen display, resolution 1024 x 768 * CPU 2 GHz, 256 MB RAM * 2x network adapters, IDE hard disk, 4x rear USB, 1x front USB * Operating system: WINDOWS 7 - Programming via user-friendly software menu, freely programmable drilling positions by ABSOLUTE, RELATIVE, or GRID coordinates, automatic workpiece mirroring and process optimization, 4 operator fields for different programs, graphical workpiece representation, parametric programming, zero-point shifting, programmable work lists, plain-text error diagnostics OPTIONS: - 1 Electronic glue monitoring system G.I.C. (Glue Insert Control) for 1 glue nozzle - 4 additional 10° vertical tilting clamps with holder (total 8 clamps) - Surcharge for machine bed length 1800 mm (working length 1800 mm) - Surcharge for: Lrodpfx Ajxwaz Hsl Nep * 1 horizontal drilling unit, 1.5 kW motor, multi-spindle drilling head with 3 individually selectable spindles, 32 mm pitch, X-axis arrangement, tool speed 3000 rpm (standard working length remains unchanged) - Y-axis NC controlled, with ball screw drive and dynamic speed 300 mm/sec; software programmable for dowel projection 7-30 mm and drilling depth 0-42 mm (with drill length 77 mm) for vertical drilling unit (top drilling), Y-axis position 5-42 mm - Surcharge for NC-controlled Y-axis, position 5-62 mm instead of 5-42 mm - Surcharge for: * 1 vertical drilling unit (top drilling), 1.5 kW motor, multi-spindle drilling head with 3 individually selectable spindles, 32 mm pitch, X-axis arrangement, tool speed 3000 rpm; Y-axis position 5-42 mm, workpiece length (Y) min. 130 mm (standard working length remains unchanged) - 1 NC-controlled Z-axis, with K

Kondisi: bekas, Tahun pembuatan: 2024, MESIN PEMBOR LUBANG DOWEL GANNOMAT "DB 21400V, 3Ph, 50Hz / 1,5 kW, lengkap dalam desain standar dengan: - Kontrol elektronik otomatis penuh dengan operasi pulsa melalui katup kaki, menjepit-memb Lrsdpexnlflefx Al Nep

Kondisi: sangat baik (bekas), Tahun pembuatan: 2010, diameter bor terbesar: 20 - 252 mm diameter bor pada beton: 20 - 202 mm jumlah kecepatan: 3 Lrjdpeznvrpsfx Al Nep koneksi listrik: 220 V, 2300 W berat: 7,4 kg

Kondisi: bekas, Universal tool milling machine DECKEL Type FP 1 Universal milling machine Machine no. 2101 - Year of manufacture: 1979 Manual travels X: 300 mm Y: 160 mm Z: 330 mm Table size: 600 x 210 mm Spindle taper: SK 40 - S20x2 Spindle speed: 40-2000 rpm, 16 steps Feed X and Y axes: 5 to 500 mm/min Rapid traverse: 1200 mm/min Motor power: 1.5 and 1.9 kW, pole-changeable Power connection: 380 Volt, 50 Hz - Infinitely variable feed on X and Z axes - Spindle speed via 2 motor speeds and 8 gearbox steps - Quill travel on vertical milling head: 60 mm Lrsdpfxjr U St Uo Al Nop - Vertical milling head swivels and can extend horizontally by 100 mm - Fixed angle table 600 x 210 mm - Coolant device integrated in machine base - Freestanding control cabinet - Original chip tray for mounting on machine base - Electrical circuit diagram available Required space (L x W x H): 1350 x 1100 x 1700 mm Weight: 770 kg Good condition

Kondisi: bekas, 4-axis CNC drilling and milling machine IXION type 30 CNC W VMC, machining center Year of manufacture: approx. 1997, machine overhauled in 2020 Lodpeu Tln Nofx Al Njrp Travel distances X: 600 mm Y: 350 mm Z: 600 mm Table size: 800 x 400 mm T-slot spacing: 75 mm Table load capacity: 300 kg Spindle taper: SK 40 (retention knob DIN 69872 A) Spindle speed: 20-5000 rpm Spindle torque: max. 150 Nm Distance spindle nose to table: max. 660 mm Feed rate X, Y and Z: 0 - 5000 mm/min, stepless Rapid traverse X, Y and Z: 15000 mm/min Tool change time: approx. 5 sec Chip-to-chip time: approx. 7.5 sec Milling capacity in St 60: 150 ccm/min Drilling capacity in St 60: 35 mm Tapping capacity in St 60: M24 Spindle drive power: 5 kW (10 kW at 25% duty cycle) Power supply: 400 Volt, 50 Hz - CNC control Heidenhain TNC 415 with 12" TFT display - Electronic handwheel - RS 232 interface - 12-position automatic tool changer - Hydro-mechanical tool clamping - Rotary axis as dividing head on the table = 4th axis, MECATECNICA type DCN 250-8, 3-jaw chuck Ø 200 mm Speed approx. 25 rpm, gear ratio 1:180 - Cabin lighting via 2x halogen spotlights - Chip conveyor with coolant pump - Control cabinet fixed to the machine Transport dimensions: Length 320 cm x Width 230 cm x Height 300 cm Machine footprint with chip conveyor (L x W x H): 3200 x 3100 x 3000 mm Machine weight: 3,100 kg Chip conveyor weight: approx. 200 kg Good condition.

Kondisi: bekas, Universal Tool Milling Machine DECKEL Type FP 1 Machine No. 28317 Year of manufacture: approx. 1960 Travel distances X: 245 mm Y: 150 mm Z: 340 mm Table size 600 x 210 mm Horizontal spindle taper MK 4 - S20 x 2 Vertical spindle speed 95-1900 rpm, 12 steps Horizontal spindle speed 60-1200 rpm, 12 steps Motor output 0.8 and 1.1 kW, pole-changing Mains connection 380 Volt, 50 Hz - Spindle speed via 2 motor speeds and 6 gearbox stages - Feed in X- and Z-axis Lrodpfx Aoiy Ekvol Nsp - Coolant system with mechanical pump integrated in the machine base - Quill travel on vertical milling head 60 mm - Vertical milling head swivels +/- 90° - Metal base made of angle iron with machine feet Space requirement L x W x H 1100 x 900 x 1650 mm Weight 650 kg in good condition