Beli Musterfirma Mesin Bor Radiasi Dengan Perangkat Pengeboran bekas (82.858)

Kondisi: baik (bekas), Spotlight drilling machine drilling device For drilling lighting holes, cable feed-through holes, and spotlight holes in wall cabinets, display cases, and carcasses. You can find more items – both new and used – in our shop! Iedpfsvdc T Njx Apastk International shipping costs on request!

Kondisi: siap digunakan (bekas), Uciosarko - the U2PRW drilling machine is designed for processing strips and furniture fronts made of solid wood or MDF. The machine operates in semi-automatic cycle mode. In a single cycle, the machine performs: cutting at a specified angle (within a 45–90 degree range) and drilling on the mitered surface or the edge of the workpiece. – Manufactured in Poland TECHNICAL SPECIFICATIONS: - Max. height of cut material: 60 mm - Max. width of cut material at 45°: 70 mm - Max. width of cut material at 90°: 150 mm - Max. length of cut material: 2200 mm - Min. length of cut material at 45°: 455 mm - Main saw blade diameter: 250 or 300 mm - Scoring blade diameter: 100 mm - Max. lower milling cutter diameter: 35 mm - Max. depth of lower milling: 15 mm - Mounting diameter for face drills and lower milling cutter: 10 mm Drilling head (face drilling): - Spindles: 4 - Axial spacing of spindles: 32; 32; 40 mm - Spindle array: linear - Max. face drilling depth: 60 mm - Installed power: 7 kW - Operating pressure: 0.6 MPa - Dimensions (length/width/height): 4300 / 1600 / 1570 mm Processing Assemblies The device is equipped with two processing assemblies: the left assembly, which is fixed, and the right assembly – movable. Each assembly consists of the following main units: main saw unit, scoring saw, drilling unit for drilling on the mitered surface, and drilling unit for drilling underneath the workpiece. Lower hole drilling unit This unit is installed optionally. It is used for processing corner strips for adjustable-width door frames. It performs a blind drilling (not through-hole), typically for cup hinges. The attached picture shows a mounted red cover, which serves as a bed for the processed angle strips as well as a cover with chip extraction. Workpiece clamping The machine is also equipped with a dual-plane clamping system incorporating both horizontal and vertical clamps. The horizontal clamps are responsible for pressing the workpiece against the vertical reference points and straightening it, while the vertical clamps immobilize the piece during processing. Horizontal clamping is always activated before vertical clamping. Iodeq Ii Dlepfx Apaetk Control system The machine's control system is user-friendly, intuitive, and functional. It allows individual activation or deactivation of all processing units, with separate controls for the left and right sides. All main units have independent drives. The right processing assembly is positioned by pressing the corresponding control buttons on the control panel. The actuation mechanism is a gear system with an electric motor driving a trapezoidal screw. The electronic US-control system with operator panel and digital readout is used to read and set the length of the workpiece. This system also automatically adjusts the length counter readout when changing between 45° and 90° cutting angles. Additionally, it is responsible for automatic referencing.

Kondisi: baik (bekas), 12-head drilling machine for sale, Table size: 400 x 360 mm Itsdpspy D Dwsfx Apask

Kondisi: bekas, Tahun pembuatan: 2007, Lelang lini pengeboran dengan komponen berikut: PRIESS EIN-Igel (Sistem Penyimpanan Vertikal) PRIESS BAT-DTW-CNC PRIESS BAT-DTW-CNC PRIESS BMA DLS-CNC WANDRES CVT 05/1000 Sistem Konveyor PRIESS RINCIAN TEKNIS Sistem Penyimpanan Vertikal Lebar pelat maks.: 500 mm Panjang pelat maks.: 1.500 mm Mesin Pengeboran CNC Jenis pemrosesan: Pengeboran Area kerja sumbu X: 2.500 mm Area kerja sumbu Y: 800 mm Diameter pelat maks.: 26 mm Jumlah unit pengeboran: 4 Jumlah total spindel pengeboran: 88 Unit Pengeboran 1 Posisi: Atas Spindel pengeboran vertikal: 23 Unit Pengeboran 2 Posisi: Atas Spindel pengeboran vertikal: 23 Unit Pengeboran 3 Posisi: Bawah Spindel pengeboran vertikal: 12 Unit Pengeboran 4 Posisi: Bawah Spindel pengeboran vertikal: 20 Mesin Pengeboran dan Pemasangan Dowel CNC (Priess BAT-DTW-CNC) Jenis pemrosesan: Pengeboran dan pemasangan Area kerja sumbu X: 2.500 mm Area kerja sumbu Y: 800 mm Jumlah area kerja: 1 Jumlah total spindel pengeboran: 49 Jumlah unit pengeboran: 4 Unit Pengeboran 1 Posisi: Atas Spindel pengeboran horizontal pada arah X: 8 Unit Pengeboran 2 Posisi: Atas Isdpfjzmtpvjx Apaotk Spindel pengeboran horizontal pada arah X: 17 Unit Pengeboran 3 Posisi: Atas Spindel pengeboran vertikal: 12 Unit Pengeboran 4 Posisi: Atas Spindel pengeboran vertikal: 12 Unit Pemasangan Jumlah unit pemasangan: 1 Jumlah injektor: 10 Jumlah wadah: 1 Material pemasangan: Dowel kayu Mesin Pengeboran dan Pemasangan CNC (BMA DLS-CNC) Jenis pemrosesan: Pengeboran dan pemasangan Area kerja sumbu X: 2.500 mm Area kerja sumbu Y: 800 mm Jumlah sumbu yang dikendalikan: 3 Daya spindel utama: 4,4 kW Jumlah spindel frais: 3 Jumlah unit pemasangan: 2 Spindel Frais 1 Posisi: Atas Jumlah sumbu yang dikendalikan: 3 Daya motor: 4 kW Spindel Frais 2 Posisi: Atas Jumlah sumbu yang dikendalikan: 3 Daya motor: 4 kW Spindel Frais 3 Posisi: Atas Jumlah sumbu yang dikendalikan: 3 Daya motor: 4 kW Unit Alur Posisi: Atas Unit Pemasangan 1 Jumlah injektor: 1 Jumlah wadah: 1 Unit Pemasangan 2 Jumlah injektor: 1 Jumlah wadah: 1 Mesin Penyikat Lebar kerja maks.: 800 mm Lebar pemrosesan maks.: 800 mm Panjang pemrosesan maks.: 2.500 mm Diameter sikat: 160 mm Konveyor Rol Lebar pelat maks.: 800 mm Panjang pelat maks.: 2.500 mm Pengumpanan pelat: Sabuk bermotor

Kondisi: baik (bekas), Pillar drilling machine, column drilling machine, upright drilling machine, multi-spindle head, multi-spindle drilling head, drilling gearbox - with twin-spindle drilling head by Sigloch Schrieder, type: V602 Itsdpfxsc Rpnnj Apask - Drive power: 1.02/0.88 kW - Adjustable drill spacing: 18-110 mm - Max. drill diameter: 2x Ø 6 mm - Table size: 275 mm - Spindle taper: MK3 - Throat depth: 220 mm - Speed range: 100-2900 rpm - Columns: Ø 100 mm - Spindle stroke: 75 mm - Gearbox - Dimensions: 900/400/H1910 mm - Weight: 230 kg

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 1982, Fungsionalitas: berfungsi sepenuhnya, two speeds: 1400 rpm at 1.1 kW, 2800 rpm at 1.5 kW Itjdev Npw Eopfx Apajk air connection 6 bar fully automatic pneumatic control with foot pedal additional switch for chip removal program T-drilling head with 7+2 drilling spindles, 32 mm pitch shank diameter of drill bits 10 mm 90° swiveling with locking mechanism undercarriage/mobile base

Kondisi: hampir baru (bekas), Fungsionalitas: berfungsi sepenuhnya, lebar total: 2.600 mm, tinggi total: 1.250 mm, Daya motor: 0,75 kW dengan kepala bor untuk pengeboran bantalan sudut dan olive deteksi ketinggian otomatis Itsdpfx Asx Ez Uaepaok

Kondisi: sangat baik (bekas), Automatic Throughfeed Drilling and Dowel Inserting Line (2 machines), consisting of: W12054A) AUTOMATIC DRILLING MACHINE "BIESSE" Techno FDT - 2 motorised throughfeed conveyor belts, feed speed up to 75 m/min - 2 horizontal drilling units (each equipped with 2 drilling heads, each with 1.8 kW motor and 22 drilling spindles) - 5 lower drilling units (each with 2 split and reversible drilling heads, each with 2.3 kW motor and various drilling heads) - 1 upper drilling unit (with 2 split and reversible drilling heads, each with 2.3 kW motor and various drilling heads) - 5 upper vertical workpiece clamps - 2 (endless) screw conveyors for chip extraction Numerical control system (software module Tooling System) for both machines. W12054B) AUTOMATIC DRILLING AND DOWEL INSERTING MACHINE "BIESSE" Techno SDT - 2 motorised throughfeed conveyor belts, feed speed up to 75 m/min Itodpfevnq Txsx Apask - 2 horizontal drilling units (each with 8 horizontal units – for gluing and dowel insertion tools) - 3 lower drilling units (each with 2 split and reversible drilling heads, each with 2.3 kW motor and various drilling heads) - 1 upper drilling unit (with 2 split and reversible drilling heads, each with 2.3 kW motor and various drilling heads) - 3 upper vertical workpiece clamps - 2 (endless) screw conveyors for chip extraction

Kondisi: sangat baik (bekas), Motor 0.75 Number of spindles: 4 Itodpfstrtz Tjx Apaek Maximum material thickness: 11 cm Number of pawls: 3

Tahun pembuatan: 2025, jam operasional: 12 h, Kondisi: baru, Mesin bor frontal otomatis untuk pengeboran kaki pada sudut berbeda, dengan meja bandul. Pengeboran tiga kali dengan ekstraksi serpihan. Mesin dapat bekerja dalam berbagai pengaturan dan konfigurasi. Digunakan untuk pengeboran tembus. Isdpsxb Elxsfx Apastk

Kondisi: bekas, Used, excellent condition, low hours Manufacturer: Hettich Model: Blue Max mini PM Pneumatic feed Isdpfxsvwf Dqe Apaotk Location: 97447 Gerolzhofen, ex stock, unloaded, unpacked Delivery in as-is condition as inspected, without warranty or guarantee.

Kondisi: bekas, Tahun pembuatan: 2012, - Area kerja: X: 9000 mm / Y: 2700 mm - Portal 1: Spindel frais 5 sumbu 20/26 kW - Pengganti alat 32 posisi - Portal 2: 2x13 Spindel - Unit pengeboran Data Teknis - Rangka portal bergerak berat dengan 2 portal - Portal dengan penggerak di kedua sisi (penggerak gantry) - Kontrol CNC SIEMENS 840D sl / PCU 50 dengan NCU 730 - Panel kontrol OP 15 dengan tampilan 15", dipasang pada rel panduan di sepanjang sumbu longitudinal Area kerja / dimensi kubus yang dapat dikerjakan dengan panjang alat / Ø 160 mm - Sumbu X: 9000 mm dengan kedua portal - Sumbu Y: 2700 mm - Sumbu Z: (Dimensi kubus standar 420 mm) - Dirancang sesuai kebutuhan pelanggan hingga ketebalan benda kerja 60 mm - Unit 5 sumbu Perlengkapan Portal 1 - 1 unit universal untuk frais 5 sumbu - Daya spindel frais: 20/26 kW (S1/S6) - Kecepatan dapat diatur hingga 24.000 1/min - Didinginkan dengan air - Antarmuka alat HSK F63 untuk penggantian alat otomatis - Pemotongan ulir dimungkinkan! Itjdszuw Ixopfx Apask - 1 majalah alat rantai dengan 32 slot - Dengan gripper putar untuk penggantian alat yang cepat - Majalah dipasang secara tetap di sisi operator Perlengkapan Portal 2 - 2 konsol pemasangan unit - Dilengkapi dengan masing-masing 2 unit pengeboran multi-spindel tugas berat - Dengan tudung penyedot debu bersama - Setiap unit pengeboran memiliki 13 spindel pengeboran (total 26 spindel pengeboran) - Dapat dipilih secara individual secara vertikal - Pengaturan dalam bentuk L - 2 spindel pengeboran miring 0 - 25° yang dapat disesuaikan - 1x kanan, 1 x kiri masing-masing sekitar 2,2 kW n= 2800 RPM - Collet penjepit bor Rego Fix ER 25 M Meja Mesin - Rangka dasar dengan rel linier - 12 palang meja pada rel linier untuk pemosisian di arah X, digerakkan dan diposisikan secara individual melalui penggerak NC - Pasokan vakum terintegrasi di palang meja - Setiap palang dipantau vakum secara individual dan terhubung ke kontrol mesin Fungsi Pemindahan Benda Kerja - 1 sistem konveyor sabuk yang terdiri dari 4 untai sabuk - Lebar 40 mm, setiap palang dengan perangkat pengangkatan - Perangkat pengangkatan dikontrol oleh NC - Pengangkatan 110 mm (+10 mm, - -100 mm) - Mesin harus dipasang di dalam lubang fondasi sekitar 300 - Pompa vakum Bush Tipe: Mink MM 1322 - Daya hisap 250 m³/h - Dengan tangki perantara 500 l untuk pembuatan vakum yang cepat - 2 sabuk pengangkut serpihan di bawah area pemesinan untuk pengangkutan serpihan dan/atau potongan kecil hingga ukuran maksimum 100 x 100 x 100 mm - Pelumasan terpusat otomatis Keselamatan Kerja - Kabin pelindung bergerak pada kedua portal - Kabin pelindung dapat dioperasikan dan dilengkapi dengan bumper pengaman dan sistem kisi-kisi cahaya pengaman di sisi belakang (karena pengaturan meja otomatis)

Kondisi: bekas, Tahun pembuatan: 1985, nomor mesin/kendaraan: 5801, de-plate-drilling-fdb600 Isdsibq Itopfx Apaotk

Kondisi: baru, Tahun pembuatan: 2026, CORMAK ZX7016 adalah mesin frais-bor serbaguna yang menggabungkan dimensi ringkas dengan fungsionalitas yang mengesankan. Dirancang dengan mempertimbangkan kebutuhan penggemar pertukangan, mesin ini sangat cocok untuk pemesinan logam yang presisi. Berkat spindel dengan tirus MK2, perangkat ini memberikan stabilitas dan akurasi kerja yang luar biasa. Selain itu, tampilan digital untuk gerakan spindel memungkinkan kontrol penuh atas proses, yang menghasilkan hasil yang konsisten dan presisi—baik di bengkel rumah maupun dalam mendukung proses produksi. Perangkat ini diproduksi sesuai dengan standar Uni Eropa yang berlaku, memiliki tanda CE, dan deklarasi kesesuaian UE. Panel kontrol dan sistem keamanan memenuhi persyaratan K3 terbaru. Pelindung spindel dan roda gigi yang dilengkapi dengan sakelar mikro memberikan keamanan tambahan selama penggunaan. KEUNGGULAN UTAMA PERANGKAT: Tampilan digital untuk kedalaman pengeboran/frais Lampu kerja bawaan pada badan mesin Konstruksi yang tahan lama dan profesional untuk memastikan umur panjang. Multifungsi: kemampuan untuk mengebor dan memfrais dalam satu perangkat. Transmisi daya melalui roda gigi sabuk yang andal. Spindel dipasang pada bantalan bola presisi. Penyesuaian ketinggian spindel memungkinkan adaptasi terhadap berbagai tugas. Spindel tembus dengan ulir untuk pemasangan kepala kerja. Sakelar pengaman dengan kelas proteksi IP54—keamanan penggunaan yang ditingkatkan. Motor listrik yang senyap dan efisien menjamin kenyamanan kerja. ✔ Semua komponen mekanis, termasuk katrol, terbuat sepenuhnya dari logam—untuk daya tahan dan keandalan maksimum. ZX7016 ASLI – presisi dan stabilitas sebagai standar Mesin ini dilengkapi dengan meja silang yang kokoh dan besar, memberikan pengoperasian yang lancar dan presisi pada dua sumbu (X/Y), yang memungkinkan pemesinan yang akurat. Ada kemungkinan untuk memasang penjepit langsung pada meja kerja (penjepit tersedia sebagai peralatan opsional). Meja kerja silang merupakan bagian integral dari konstruksi mesin, menjamin kekakuan dan keandalan selama pengoperasian. Parameter teknis: Diameter pengeboran maks. 16 mm Diameter frais vertikal maks. 12 mm Lebar frais ujung maks. 40 mm Motor S1/S6 0,55 kW / 0,75 kW Kecepatan motor 1420 rpm Tegangan / frekuensi 230 V / 50 Hz Dimensi meja (panjang x lebar) 420 x 152 mm Perjalanan meja pada sumbu Y 115 mm Perjalanan meja pada sumbu X 230 mm Jarak kolom dari spindel 180 mm Tinggi ujung spindel dari meja 155 - 355 mm Gerakan spindel 77 mm Tirus spindel MK2 Ijdpfxjwvhmwo Apastk Kecepatan spindel 320, 400, 500, 650, 800, 900, 1350, 1450, 1800, 1900, 2700, 3300 rpm. Lebar dan jarak alur dovetail 12 x 80 mm Berat 75 kg Catatan: Parameter pengoperasian yang diberikan bersifat indikatif dan dapat bervariasi tergantung pada jenis material yang diproses, alat yang digunakan, dan kondisi teknisnya (misalnya, tingkat keausan atau ketajaman). Peralatan standar Chuck bor 1-16 Arbor chuck bor Meja silang (kerja) Perkakas tangan Instruksi pengoperasian DTR / PL

Tahun pembuatan: 1995, Kondisi: siap digunakan (bekas), A CNC fixed-table milling and drilling center Bimatec Soraluce is available. Travel distances X/Y/Z: 2500mm/900mm/1600mm, spindle speed: 2000 rpm, spindle taper: ISO40/M16, tool stations: 30. Transport dimensions X/Y/Z: approx. 5300mm/3450mm/3500mm, weight: approx. 13,500kg, control unit: Heidenhain CNC 415, operating hours: 31,507 h. Includes fixed table, moving column, automatic indexing milling head, manual touch probe, coolant system, and filtration unit. Documentation is available. Inspection on site possible. Itjdpfx Apsu T Rgwjaok

Kondisi: baru, Diameter lubang bervariasi mm Jumlah kepala bor horizontal 3 unit Jumlah kepala bor vertikal 4 unit Dimensi (Panjang/Lebar/Tinggi) 6100x1500x2300 mm Berat 950 kg 1 UNIT Pusat Pengeboran dan Pemesinan Baru Götzinger Power Drill 300 Dengan Götzinger PowerDrill, Anda dapat melakukan: - Pengeboran sisi depan dan samping - Pemasangan engsel pada pintu, balok penyangga, dan kusen - Pola pengeboran dapat diprogram secara bebas - Anda dapat mengebor: lubang untuk pegangan dan bantalan sudut, dengan kepala bor multi-spindel yang dapat diganti dengan cepat - Anda dapat memesin dan mengebor: kotak kunci, gagang, dan sistem pengunci serta engsel 3D - Mesin ini memiliki unit pemesinan horizontal dan vertikal - Kontrol yang mudah memungkinkan Anda membuat, menyimpan, dan memanggil program pengeboran dan pemesinan Rangka dasar dengan konstruksi yang stabil, dilapisi dengan pelat logam Penopang meja 1800 x 200 mm Unit pemesinan: Sumbu X – Langkah kerja 500 mm Sumbu Y – 0-120 mm Sumbu Z – 0-105 mm (di atas meja) Unit horizontal: 1 Unit pengeboran horizontal (unit pengeboran engsel sisi kiri) ----- Motor pengeboran 220 V, 1,1 kW Pemasangan collet ER 25 4.000 – 11.000 Rpm, dapat diatur 1 Unit pemesinan horizontal untuk kotak kunci ----- Motor pemesinan 2,2 kW Kecepatan dapat diatur 3.000 - 16.000 Rpm Pemasangan collet ER 25 1 Unit pengeboran horizontal (unit pengeboran engsel sisi kanan) ----- Motor pengeboran 1100 W, kecepatan dapat diatur secara bertahap 4.000 - 11.000 Rpm, dengan pemasangan collet ER 25 Unit vertikal: 1 Unit pengeboran vertikal ----- Motor pengeboran 1100 W, kecepatan dapat diatur secara bertahap 4.000 - 11.000 Rpm, dengan pemasangan collet ER 25 1 Unit pengeboran vertikal - dengan perangkat penggantian kepala bor cepat ----- Motor pengeboran 1,1 kW, 3.000 Rpm Iedpfx Aeif Az Uopaotk Termasuk: 1 Kepala bor BKF 2/3, untuk bantalan sudut termasuk set mata bor, dapat diganti dengan cepat ----- Sebagai suku cadang terpisah, susunan mata bor sesuai dengan spesifikasi pelanggan 1 Kepala bor BKF 3, untuk pegangan termasuk set mata bor, dapat diganti dengan cepat ----- Sebagai suku cadang terpisah, mata bor 1 Kubo d= 25, 2 x Dübo d = 10 1 Unit pemesinan vertikal untuk kotak kunci ----- Motor pemesinan 2,2 kW Kecepatan dapat diatur 3.000 - 16.000 Rpm Pemasangan collet ER 25 1 Potong penghenti panjang kanan dan kiri, panjang kerja 2,7 m, dikontrol NC Kontrol: elektro-pneumatik dengan tiga sumbu Pengontrol pemosisian NC dan fungsi mesin terintegrasi Input melalui layar TFT, 10”, berwarna Mesin lengkap, sesuai dengan standar CE, dengan 1 set peralatan pengeboran, DÜBO masing-masing 1 x d = 6,8,10,12 + 2 pahat untuk pemesinan kasar d = 16, siap untuk dipasang Dimensi pengiriman: Mesin P x L x T = 2,50 x 1,50 x 2,30 m, berat 850 kg Penghenti panjang P x L x T = 6,00 x 0,30 x 0,30 m, berat 100 kg ----- Harga total dalam konfigurasi di atas, dari pabrik: berdasarkan permintaan Ditambah biaya pengiriman dan pemasangan/pelatihan (Spesifikasi teknis sesuai dengan pabrikan - tanpa jaminan!)

Kondisi: baru, Condition: New Delivery time: approx. 12–14 weeks from order Country of origin: Spain Price: €50,410 Leasing rate: €952.75 Drilling capacity in structural steel: 35 mm Tool holder: MT 4 Throat (distance spindle–column): 390 mm Spindle speeds: 94–2,225 rpm (16 steps), 50 Hz, 113 rpm Tapping capacity: M35 Length: 1,660 mm Width: 1,510 mm Height: 2,600 mm Itedpfx Aeynmtxepaek Weight: 910 kg Quill stroke: 180 mm Distance spindle–table: 190–650 mm Distance spindle–base: 1,310 mm Column diameter: 125 mm Table size: 400 x 420 mm Automatic feed: 0.10 – 0.18 – 0.24 (3 steps) mm/rev Motor speed: 750–1,500 rpm Manufacturer: ERLO (MADE IN SPAIN) FOR DEMANDING WORKSHOP APPLICATIONS Drilling and milling machine Automatic feed Electromagnetic precision clutch Gear drive Cross table Fixed table and adjustable drill head Control console Coolant supply with electric pump Handwheel for fine adjustment Tool clamping fixture Adjustable stops Safety guard OPTIONS (PRICES ON REQUEST): Digital drilling depth display Tapping attachment Motorized longitudinal and/or cross feed Digital readout for table axes and/or drill head height adjustment

Kondisi: baru, Tahun pembuatan: 2026, CORMAK HK25 VARIO adalah mesin frais-bor yang ringkas, dirancang untuk berbagai aplikasi. Sangat cocok untuk para penggemar dan profesional, mesin ini tidak hanya menawarkan ukuran yang ringkas, tetapi juga fungsionalitas yang luar biasa. Dilengkapi dengan tirus spindel MK3, mesin frais ini memberikan stabilitas dan presisi dalam proses pemesinan. Tampilan digital kecepatan putar spindel memungkinkan kontrol yang tepat atas proses, menjamin hasil yang optimal. Fitur Mesin * Tampilan digital kecepatan * Cekam bor dengan tangkai * Tampilan digital kedalaman pengeboran * Pengaturan kecepatan yang halus * Spindel yang terpasang dengan bantalan presisi Data Teknis PENGEBORAN 20 mm PEMFRAISAN SILINDER-MUKA 16 mm PEMFRAISAN MUKA 63 mm TIRUS SPINDEL MK3 GERAKAN SPINDEL 50 mm JUMLAH KECEPATAN SPINDEL variabel RENTANG KECEPATAN SPINDEL 50-2250 rpm LUAS PERMUKAAN MEJA KERJA 700 x 180 mm GERAKAN MAKSIMUM MEJA (LONGSIR) 480 mm GERAKAN MAKSIMUM MEJA (MELINTANG) 175 mm GERAKAN MAKSIMUM KEPALA (VERTKAL) 280 mm JUMLAH ALUR T 3 DIMENSI ALUR T T12 / 12 mm MOTOR 0,75 kW/1 HP 230V DIMENSI 980x600x1010 mm BERAT 110 / 125 kg Peralatan Opsional * cengkram putar Itedpotz Sxljfx Apajk * cengkram miring * cengkram presisi * meja pembagi * pembagi * kepala ulir * kepala frais * mata frais tangkai (HSS, HSSE, HSS-PM, VHM) * mata bor tangkai silinder * mata bor tirus * mata frais * pengulir manual dan mesin * set elemen pengencang * cekam perkakas (untuk selongsong penjepit, Weldon) * tangkai penggerak * cekam bor

Tahun pembuatan: 1981, Kondisi: bekas, nomor mesin/kendaraan: 77-8101, Lg-Nr. 01501, Technical data: - Drilling capacity in steel: 28 mm - Thread cutting device - Drill spindle mount: MT 3 - Drill spindle stroke: 160 mm - Table dimensions approx. 750 x 500 mm - Arm reach up to approx. 620 mm - Vertical travel of the arm: 600 mm - Column diameter: 250 mm - Spindle speeds in 12 steps: 80 – 2800 rpm - 3 feeds: 0.1 / 0.15 / 0.25 mm/rev - Drill spindle drive: 400 V / 5.5 kW - Coolant system - Space requirement: approx. W 1100 x H 1550–2150 x D 950 mm - Weight approx. 1200 kg Ijdpfx Apeb Ennksajtk - Operating manual

Kondisi: baru, Tahun pembuatan: 2026, Our XZ 6350ZB Milling and Drilling Machine guarantees both reliability and precision. Featuring a straightforward and robust design, this machine ensures trouble-free operation for extended periods. Equipped with both a horizontal spindle and a vertical head, the XZ 6350ZB stands out for its versatility. Machine Features: - Vertical Head and Horizontal Spindle: The XZ 6350ZB is fitted with both a vertical head and a horizontal spindle, offering a broad spectrum of machining capabilities. - ISO 40 Tool Taper: Stable and reliable tool clamping is ensured with the ISO 40 taper, guaranteeing high-precision operations. - Power Feed and Rapid Traverse: The machine is equipped with power feeds on the X and Y axes, and a rapid traverse setting feed on the Z axis, enabling precise adjustments and efficient workflow. - Extendable Vertical Spindle: The extendable vertical spindle ensures easy access to the workpiece, making the machine intuitive and convenient to operate. - Mechanical Feed and Automatic Thread Cutting: Three-range mechanical feed and automatic thread cutting enhance machining flexibility. - Swiveling Vertical Head and Extendable, Rotating Upper Beam: The vertical head swivels 0–90°, while the upper beam can be extended and rotated, further increasing operational precision and versatility. Choose our XZ 6350ZB milling and drilling machine and benefit from a comprehensive service package including warranty, Polish-language manual, professional servicing, and convenient delivery. We are prepared to meet your machining needs, providing not only high quality but also complete customer support. Technical Details: WORK TABLE DIMENSIONS 1270 mm x 260 mm Ijdpfx Apsvxg T Aoaetk TABLE TRAVEL X/Y/Z 710 / 320 / 360 mm NUMBER OF T-SLOTS IN TABLE 5 DISTANCE BETWEEN SLOTS 50 mm MAX. TABLE LOAD 200 kg VERTICAL HEAD Swiveling 90° SPINDLE Extendable, L = 120 mm SPINDLE TAPER ISO 40 MECHANICAL SPINDLE FEED 0.08–0.15–0.25 mm/rev VERTICAL SPINDLE SPEED RANGE 90–2000 rpm HORIZONTAL SPINDLE SPEED RANGE 40–1300 rpm LONGITUDINAL FEED RATE RANGE 24–402 mm/min CROSS FEED RATE RANGE 24–402 mm/min RAPID TRAVERSE Rapid setting for Z axis UPPER BEAM EXTENSION 460 mm DISTANCE SPINDLE TO COLUMN (VERTICAL) 260–740 mm DISTANCE SPINDLE TO TABLE (VERTICAL) 100–440 mm DISTANCE SPINDLE TO TABLE (HORIZONTAL) 0–300 mm DIGITAL READOUT 3 axes MAIN MOTOR POWER 2.2 kW / 3 HP OVERALL DIMENSIONS 1520 x 1289 x 2150 mm WEIGHT 1420 kg

Kondisi: baru, Tahun pembuatan: 2026, The ZX7045 B1 DRO milling-drilling machine is an advanced tool designed for precise metalworking. It excels in drilling, reaming, and enlarging holes up to 45/40 mm in cast iron, as well as thread tapping for screws up to M12 mm. With a milling capacity of up to 80 mm (width) and keyway cutting up to 22 mm, this machine offers versatile applications. The ZX7045 B1 DRO version features an automatic spindle feed, increasing work efficiency. Additionally, it is equipped with a digital readout for enhanced precision and a coolant system to maintain optimal temperature during machining. This machine is ready for immediate use and available directly from stock. It is ideal for professionals who demand high quality and performance in metalworking. Product Features: - HEAVY-DUTY, STABLE CAST IRON CONSTRUCTION - AUTOMATIC SPINDLE FEED - MILLING HEAD HEIGHT ADJUSTED ON THE SUPPORT, NOT THE COLUMN - ADDITIONAL LIQUID COOLING - MASSIVE CROSS TABLE WITH PRECISELY GROUND SURFACE - DOVETAIL GUIDES - QUIET OPERATION THANKS TO GROUND GEARS - LEFT AND RIGHT SPINDLE ROTATION - ROTARY HEAD +/- 90° - ADJUSTABLE HEAD HEIGHT - DIGITAL READOUT - Base available as an optional accessory TECHNICAL DATA: - DRILLING CAPACITY IN STEEL: 32 mm - DRILLING CAPACITY IN CAST IRON: 45 mm - FACE MILLING CUTTER DIAMETER: 80 mm - END MILL DIAMETER: 28 mm - SPINDLE SPEEDS: 50, 95, 100, 180, 190, 355, 360, 655, 710, 1260, 1310, 2520 rpm (6/12) - SPINDLE TAPER: MT 4 - SPINDLE STROKE (AUTOMATIC FEED): 125 mm - WORK TABLE DIMENSIONS: 820 mm x 240 mm - BASE DIMENSIONS: 580 x 600 mm - MAX. DISTANCE SPINDLE TO TABLE: 445 mm - DISTANCE SPINDLE TO COLUMN SURFACE: 260 mm - TRAVEL X/Y/Z: 515/175/430 mm - QUILL FEED RATE: 0.12; 0.18; 0.25 mm/rev - HEAD ROTATION LEFT/RIGHT: 90° - MOTOR POWER: 1.8 kW (2.5 HP) - POWER SUPPLY: 400 V - WEIGHT: 350 kg Itodpfx Apjud H H Ujaek Available Accessories: - MK4/B18 drill chuck arbor - Digital readout - Service tools - Drill chuck 3–16 mm/B18 - Reducing sleeve MK4/MK3 - Reducing sleeve MK3/MK2 - Operating manual in English

Kondisi: baru, Tahun pembuatan: 2026, The Rezarko ZX7045 B1L drilling-milling machine is a universal drill-mill designed for precise metalworking under both workshop and production conditions. This machine combines drilling and milling capabilities, ensuring stable operation due to its robust cast iron construction and a wide spindle speed range. It is an ideal solution for facilities demanding repeatability, rigidity, and true efficiency. Key machine features: - Heavy-duty, stable cast iron construction – minimises vibration during milling and drilling operations. - Automatic spindle feed (125 mm) – increased efficiency for batch processing. - Height adjustment via the support, not the column – for greater precision in settings. - 12 spindle speed ranges up to 3200 rpm – adapt to the material and tooling requirements. - Machine equipped with coolant system – constant cutting conditions and extended tool life. - Dovetail slideways – high rigidity and accuracy of traverse movements. - Swivelling head ±90° – allows for angled machining. - Quiet operation thanks to ground gears and capability for left/right spindle rotation. Construction & Technology: The ZX7045 B1L drill-milling machine is designed as a compact, yet fully industrial metalworking mill. The solid cast iron base and body deliver high system rigidity. The cross table—1000 x 240 mm—has a precision-ground working surface for secure and accurate component clamping. The spindle, MT4 standard, supports a wide range of tool types: end mills, milling heads, and taper shank drills. The 1.8 kW (2.5 HP) motor, 400 V powered, delivers stable performance even when facing larger milling diameters. Precision & Efficiency: With X/Y/Z travels of 560/190/430 mm, the drilling-milling machine accommodates a broad spectrum of operations: drilling up to 32 mm in steel and 45 mm in cast, face milling up to 80 mm, and end milling up to 28 mm. The adjustable quill feed rate (0.12; 0.18; 0.25 mm/rev) permits parameter optimisation to match material type and quality requirements. Standard equipment: - Drill chuck arbor MK4/B18 - Drill chuck 3-16 mm/B18 - Reducing sleeve MK4/MK3 - Reducing sleeve MK3/MK2 - Service tools - Polish language operator’s manual Optional equipment: - Machine base - Automatic X-axis feed - Swivel, tilting, or precision vices Itodoy E Hk Hepfx Apajk - Dividing tables and indexers - Tapping and milling heads - Tool holders, driving arbors Technical specifications: - Drilling capacity in steel: 32 mm - Drilling capacity in cast iron: 45 mm - Face mill diameter: 80 mm - End mill diameter: 28 mm - Spindle speeds: 95, 170, 190, 280, 340, 540, 570, 960, 1100, 1600, 1950, 3200 rpm (12 steps) - Spindle taper: MT 4 - Spindle travel: 125 mm (automatic feed) - Table dimensions: 1000 mm x 240 mm - Base dimensions: 440 x 600 mm - Max. spindle-to-table distance: 445 mm - Spindle-to-column surface distance: 262.5 mm - X/Y/Z travel: 560/190/430 mm - Quill feed rate: 0.12; 0.18; 0.25 mm/rev - Swivelling head: ±90° left/right - Motor power: 1.8 kW (2.5 HP) - Power supply: 400 V - Weight: 375 kg

Kondisi: baru, Tahun pembuatan: 2026, en1 Itodpfx Apjx Dkr Njaek

Kondisi: baru, Tahun pembuatan: 2026, Milling and Drilling Machine XZ7550ZB is an excellent tool for professionals. This machine, with its simple and uncomplicated design, ensures continuous operation over long periods. Featuring a vertical head and horizontal spindle, the XZ7550ZB offers extensive machining capabilities. The ISO 40 tool holder taper ensures a secure tool clamping, while the automatic spindle feed further enhances productivity and efficiency. Powered feeds in the X and Y axes and a rapid positioning feed in the Z axis allow for precise machining, and the extendable spindle of the vertical head improves access to workpieces. The mechanical feed in three ranges and automatic threading option provide added flexibility. The vertical head swivels 0-90°, and the upper sliding and rotating beam adds further functionality and precision. Machine Description - AUTOMATIC ELECTRIC TABLE FEED IN Y AXIS - AUTOMATIC MECHANICAL TABLE FEED IN X AXIS - AUTOMATIC SPINDLE FEED - HEAVY STABLE CAST-IRON FRAME, VERY PRECISELY MANUFACTURED - MASSIVE CROSS TABLE WITH PRECISION-GROUND SURFACE - DOVETAIL GUIDES ON ALL THREE AXES - QUIET OPERATION DUE TO GROUND GEARS - LEFT AND RIGHT ROTATION - ROTARY HEAD +/- 90° Technical Data Max. drilling diameter: 50 mm Max. horizontal milling length: 100 mm Max. vertical milling diameter: 25 mm Max. tapping diameter: M16 Max. boring diameter: 120 mm Spindle taper: ISO 40 Spindle speed range and number (50Hz, rpm): 72-1800 (8) Vertical, 60-1350 Horizontal (9) Distance between spindle and column surface: 200-700 mm Distance between spindle and table: 100-480 mm Distance between spindle axis and table: 0-380 mm Number, width, and pitch of T-slots: 5 / 14 mm / 44 mm Spindle travel: 120 mm Table size: 1000x240 mm Table travel: 600x230 mm Table feed: 24-720 mm/min (8 speeds) Spindle feed: 0.015; 0.08; 0.25 mm/rev. Motor (Vertical/Horizontal): 1.5 kW / 1.5 kW Overall dimensions: 1120x1060x2035 mm Weight: 970 kg Scope of Delivery - 3-axis digital readout SINO - ISO 40 Morse reducing sleeves - B16 drill chuck - CE declaration of conformity - Machine vise L - 160 mm Itjdpfjud Ic Djx Apajk - Milling arbor with set of collets for end mills - Horizontal spindle support / steady rest / - Long milling arbor - Basic tools - 24V halogen lighting system - Coolant system

Kondisi: baru, Tahun pembuatan: 2026, The drill-milling machine is suitable for drilling, reaming, and enlarging holes up to 45/40 mm in cast iron, as well as thread tapping for bolts up to M12 mm, milling up to 80 mm width, and slotting up to 22 mm. It is also designed for cutting and face milling applications. The machine is available immediately from stock. Machine Features This machine can be used for drilling, reaming, enlarging holes up to 45/40 mm in cast iron, threading bolts up to M12 mm, milling up to 80 mm width, and slotting up to 22 mm. It is also suitable for cutting and face milling. Various accessories can be installed. HEAVY-DUTY STABLE CAST IRON BODY MILLING HEIGHT IS ADJUSTED ON THE SUPPORT, NOT THE COLUMN ROBUST CROSS TABLE FOR MILL/DRILL WITH PRECISION-GROUND WORKING SURFACE DOVETAIL GUIDES QUIET OPERATION THANKS TO GROUND GEARS LEFT AND RIGHT SPINDLE ROTATION SWIVEL HEAD +/- 90 DEGREES ADJUSTABLE HEAD HEIGHT Machine base available as an optional extra – €200 Technical Data MAX. DRILLING CAPACITY: 45 mm MAX. FACE MILLING CAPACITY: 80 mm MAX. CYLINDRICAL-END MILLING: 28 mm MAX. THREAD TAPPING: 12 mm SPINDLE TRAVEL: 120 mm SPINDLE TAPER: MT4 SPINDLE SPEEDS (6-STAGE MOTOR WITH 1400rpm): 95, 170, 280, 540, 960, 1600 min-1 MAX. DISTANCE SPINDLE TO TABLE: 475 mm DISTANCE SPINDLE TO COLUMN FACE: 260 mm WORKTABLE DIMENSIONS: 820 x 240 mm Itedpfx Apeud H Husask TABLE TRAVEL: 550 x 170 mm MOTOR: 1.1 kW / 1.5 HP VOLTAGE (two options): 400V (three-phase motor) PACKAGING DIMENSIONS: 1140 x 800 x 1040 mm NET WEIGHT: 270 kg Available Equipment MK4/B18 drill chuck arbor Service tools 3-16 mm/B18 drill chuck MK4/MK3 reducing sleeve MK3/MK2 reducing sleeve Operating manual in Polish