Beli Ohra Piii bekas (41)

Kondisi: sangat baik (bekas), Tahun pembuatan: 2006, Fungsionalitas: berfungsi sepenuhnya, kapasitas angkut: 2.000.000 kg, tinggi rak: 7.080 mm, panjang total: 128.800 mm, jumlah baris rak: 14, panjang rak: 18.400 mm, kapasitas muatan per bagian penyimpanan: 145.000 kg, Perlengkapan: dua sisi, Kami menawarkan rak rak palet OHRA PIII yang sangat terawat dengan baik ini, tahun pembuatan 2006. Nwodpsyzzipjfx Aa Usg

Kondisi: baik (bekas), Tahun pembuatan: 2019, Warehouse building consisting of cantilever and pallet racks, manufacturer OHRA, footprint approx. 867 m² – used - : Price ex location: €99,500 (net), for self-disassembly! Disassembly service available for an additional charge upon request. Material to close one gable end is also available at extra cost! Manufacturer: OHRA Year of construction: 2019, sheet metal 2021 Building dimensions: Nedpfx Aajyk H Rio Uewg Width: approx. 17.35 m Length: approx. 50 m Rack height: approx. 6,385 mm Ridge height: approx. 7.10 m After dismantling, one of the long sides of the building will be open (currently where it adjoins the existing hall) Cantilever rack: 2 rows of 25 double-sided frames each = total 50 double-sided cantilever rack frames Arm length: 1.20 m Arm load: 1,400 kg Load center: 600 mm Upright load per side: 4,200 kg Axis spacing: 2 m Arms are bolted on Arms with anti-roll-off device, system for securing loads Including pallet beams Ground level plus 3 arm levels per side Total depth: 2.70 m (2x 1.20 m + 30 cm frame) Aisle width: 3.25 m K-Foot-60-IPE 300-1200-1200-RS-A-RAL K-Roof arm-K60-IPE 120-2750-S6°-PW4-A-RAL Pallet rack: Manufacturer: OHRA P3 pallet racking system Year: 2019 Bay width: 2,900 mm, four bays at 2.40 m length Load per level: 2,000 kg Load per bay: 6,000 kg Top edge 1st level (buckling length): 800 mm 1 row with 17 frames, 1 row with 19 frames (at two locations with pipes) Total number of frames: 36 Rack length: approx. 48.10 m Frame depth: 1.10 m Frame width: approx. 10 cm Beam height: approx. 10 cm Beam thickness (bearing surface): approx. 5.5 cm Beams: IPE Floor plus 3 beam levels Number of beams: approx. 162 pieces at 2.90 m, approx. 24 pieces at 2.40 m length Snow load zone: 1 (0.65 kN/m²) Wind zone: 1 / terrain category 0.48 kN/m² Available: immediately Condition: good, slight rust on some outer frames and faded paint Location: Hockenheim area Drawings available as PDF, itemized list, structural analysis. The sideloader shown in the pictures is also for sale for an additional charge (recently fitted with a nearly new battery, cost approx. €9,600 (net)).

Kondisi: baik (bekas), Here is the English translation with professional, industry-specific terminology: Over 50 meters of this type in stock, OHRA cantilever racking – new! Negotiation price: €3,290.00 net You are bidding on a rack approx. 14 m long, consisting of: - 10 uprights with base, 2.5 m high - 5 adjustable arms per upright (60 cm each), load capacity 300 kg per arm - Diagonal bracing, cross bracing, and spacers are included Frame spacing/bay width: 150 cm Arm length: 60 cm Load capacity: 300 kg per arm Load capacity per upright per side: 1,500 kg Over 100 meters available Heights available: 2.5 m, 4 m, or 6 m Other configurations available on request. (Subject to changes and errors in technical data, specifications, and prices. Sale subject to prior sale! See our general terms and conditions. All prices excl. VAT, ex stock.) Purchase / Sale: We are constantly seeking and offering numerous items from a wide range of sectors: - Machinery from all industries - Stocklots - Special offers - Swept-clean plant clearances - Company liquidations - Surplus stock purchase Nwjdebvmctjpfx Aa Usg Fast – flexible – efficient! We also clear and/or dispose for insolvency administrators. Send us a message with a few keywords and we will get back to you promptly.

Kondisi: baru, OHRA cantilever racking Negotiable price: €5,940.00 net ex stock You are bidding on a racking system with a length of 7.5 m, consisting of: - 6 uprights with base, height 6 m - 4 adjustable cantilever arms per upright (120 cm), load capacity 900 kg/arm - Diagonal braces, reinforcements, and spacers included Bridges, mesh decking, and chipboard shelves are available separately for an additional charge! Frame spacing: 150 cm Arm length / cantilever: 120 cm Load capacity: 900 kg per arm Maximum load per upright, per side: 3,600 kg Over 100 meters available. Heights of 2.5 m, 3 m, or 4 m also in stock. Other configurations available on request. (Specifications and prices subject to change and error. Intermediate sale reserved! Please refer to our terms and conditions. All prices excl. VAT, ex stock.) Purchase / Sale Nodpfoby Uunox Aa Ujwg We are continuously looking for and offering various items from all sectors: - Machinery from all industries - Surplus stock - Special lots - Swept-clean company liquidations - Business closures - Surplus stock purchase Fast – flexible – efficient! We also clear out or dispose for insolvency administrators. Send us a short enquiry — we will respond promptly.

Kondisi: sangat baik (bekas), Tersedia dua unit. Harga per unit. Rak pertama, dimensi: lebar 133 cm, tinggi 256 cm, panjang 510 cm, lebar antar penyangga 96 cm. Rak kedua, dimensi: lebar 133 cm, tinggi 256 cm, panjang 585 cm, lebar antar penyangga 111 cm. Nwodoyzzbrjpfx Aa Ujg

Kondisi: baik (bekas), Fungsionalitas: berfungsi sepenuhnya, kapasitas angkut per lengan kantilever: 1.500 kg, panjang total: 1.600 mm, Sale of OHRA cantilever arms – only the arms are available. The arms are used but undamaged. Various lengths and specifications available. Lengths from 1000 mm to 1600 mm. Price starting from: 25 euros net plus VAT. Available quantity: 1,000 units. Racking systems | Sales • Installation • Dismantling • Repairs | MM Lagertechnik We will be happy to provide you with a non-binding offer – tailored to your individual requirements. Our services: ✔ Sale of warehouse racking ✔ Installation & dismantling ✔ Repair & refurbishment ✔ Purchase of used racking systems ✔ Rack inspections according to regulations ✔ Training in warehouse technology We support you with the planning, delivery, and professional installation of your warehouse and operational equipment – reliably and efficiently. Thanks to our many years of experience in storage technology, we serve: Small businesses Medium-sized companies Industrial enterprises from various sectors Nodpfx Aaoy Irq Rj Uewg With us, you receive everything from a single source – from planning to execution. Note: This advertisement does not constitute a binding offer. After contacting us, you will receive an individual offer tailored to your requirements.

Kondisi: baik (bekas), Cantilever racking OHRA 3 m high Over 100 m in stock, see pictures. Height: 3 m Arms: 100 cm Load capacity per arm: 800 kg 4.5 running meters, 4 uprights with arms Negotiable price: €2,360 net Offer includes: 4 uprights with base, 3 m high 4 adjustable arms per upright, each 100 cm, load capacity 800 kg/arm Diagonal bracing, stiffening and spacers included. Frame spacing: 150 cm Load capacity per upright, per side: 3,200 kg Heights of 2.5 m, 4 m, or 6 m also available Other configurations available on request: Over 3,000 linear meters of pallet racking from various manufacturers constantly in stock. Transport and assembly available on request. (Subject to technical changes, errors and prior sale! See our Terms and Conditions, all prices excl. VAT ex stock) Purchase / Sale We are constantly looking for and offering numerous items from various categories • Broom-clean company clearances Nodpecd Dwysfx Aa Ujwg • Business liquidations • Quick – flexible – efficient! We also clear and/or dispose for insolvency administrators. Send us a short message with some keywords and we will contact you promptly. To get to our page, please click on our logo!

Kondisi: bekas, Tahun pembuatan: 2002, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: MING1+11, kapasitas angkut per lengan kantilever: 1.000 kg, tinggi rak: 3.050 mm, panjang total: 21.000 mm, lebar total: 2.150 mm, tinggi total: 3.050 mm, jarak gandar: 1.900 mm, kapasitas beban per penyangga: 7.500 kg, panjang rak: 21.000 mm, kedalaman tenggorokan: 900 mm, berat keseluruhan: 7.000 kg, Perlengkapan: dua sisi, OHRA K60K – Double-Sided Cantilever Rack, Long Goods Rack, Heavy-Duty Rack Rack available 2x!!! 12 uprights – 48 cantilever arms K60K Height 3.05 m – Uprights: IPE200 – Upright spacing: 1.9 m center-to-center Total depth approx. 2.15 m (double-sided) Arms 90 cm – IPE100 Nodev Smk Iepfx Aa Ujwg Load capacity per arm: 1,000 kg Load capacity per upright: 7,500 kg Including wooden inserts Very good condition, see pictures Forklift available for loading Collection by appointment only in 75053 Gondelsheim Shipping via freight forwarder possible – please inquire with your postal code

Kondisi: bekas, Tahun pembuatan: 1996, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: MING2/3/4/5/6/7, kapasitas angkut per lengan kantilever: 1.000 kg, tinggi rak: 3.000 mm, panjang total: 21.000 mm, lebar total: 2.150 mm, tinggi total: 3.000 mm, jarak gandar: 1.480 mm, kapasitas beban per penyangga: 7.500 kg, panjang rak: 21.000 mm, kedalaman tenggorokan: 900 mm, berat keseluruhan: 6.000 kg, Perlengkapan: dua sisi, OHRA double-sided cantilever racking – long goods rack – heavy-duty shelving Consisting of 15 uprights + 60 cantilever arms Height: 3.05 m – Uprights: IPB200 (HEB200) – Upright spacing: 1.48 m center-to-center Total depth: 2.15 m (double-sided) Nwodpfx Aaev Smm Ne Ujg Arms: 90 cm – IPE100 Load capacity per arm: 1,000 kg Load capacity per upright: 7,500 kg Wooden inserts can be supplied on request. 6 racks available!!! 4 units with 4 levels – 60 arms 2 units with 6 levels – 90 arms (+ €2,000 surcharge) Very good condition, see photos. Forklift available for loading Collection by appointment only in 75053 Gondelsheim Shipping via freight carrier possible, please inquire with your postal code.

Kondisi: bekas, Tahun pembuatan: 1996, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: MING8+10 / 9, kapasitas angkut per lengan kantilever: 1.000 kg, tinggi rak: 3.000 mm, panjang total: 21.000 mm, lebar total: 2.150 mm, tinggi total: 3.000 mm, jarak gandar: 1.480 mm, kapasitas beban per penyangga: 7.500 kg, panjang rak: 21.000 mm, kedalaman tenggorokan: 900 mm, berat keseluruhan: 6.000 kg, Perlengkapan: dua sisi, Ohra – double-sided cantilever rack for long goods, heavy-duty shelving Consisting of 10 uprights + 40 cantilever arms Height: 3.05 m – uprights IPB200 (HEB200) – upright spacing: 1.48 m center-to-center Total depth: 2.15 m (double-sided) Arms: 90 cm – IPE100 Load capacity per cantilever arm: 1,000 kg Load capacity per upright: 7,500 kg Nwedpjv Smrxefx Aa Ueg Wooden inserts can be supplied on request. The rack is available 3 times! No. 8+10 – 4 racks with 4 levels each – 40 arms total No. 9 – 1 rack with 6 levels – 60 arms total + €1,000 surcharge Very good condition, see pictures Forklift available for loading Collection only by prearranged appointment in 75053 Gondelsheim Shipping by freight forwarding possible, please inquire with your postal code

Kondisi: hampir baru (bekas), Tahun pembuatan: 1997, Fungsionalitas: berfungsi sepenuhnya, kapasitas angkut per lengan kantilever: 900 kg, kapasitas angkut: 4.474 kg, tinggi rak: 5.585 mm, panjang total: 12.600 mm, lebar total: 2.720 mm, jarak gandar: 1.400 mm, jarak antara tiang: 1.400 mm, berat muatan maksimum: 900 kg, kapasitas beban per penyangga: 900 kg, Perlengkapan: dua sisi, CANTILEVER BESI DOUBLE-FACE DICAT RAL 5015 UNTUK DALAM RUANG, SISTEM OHRA H60K, MATERIAL BEKAS DILIHAT DAN DISETUJUI TERDIRI DARI: 5 UNIT KOLOM DAN BASE IPE240 TINGGI 5.585 MM + PENAMBAHAN TINGGI TOTAL ±7.000 MM, 3 UNIT KOLOM DAN BASE IPE220 TINGGI 4.985 MM + PENAMBAHAN TINGGI TOTAL ±5.500 MM, 2 UNIT KOLOM DAN BASE IPE220 TINGGI ±4.285 MM. PANJANG RAK 12.600 MM, LEBAR 2.720 MM DENGAN REL PROFIL L 2.750 MM 110 LENGAN PENYIMPANAN DAPAT DIPINDAHKAN DENGAN PENGAIT, PANJANG 1.250 MM, KAPASITAS 900 KG PER LENGAN Nedpfxsygmz He Aa Uswg INCLUDE PENYANGGA SILANG, PENGAIT PENGHUBUNG, BAUT (TIDAK TERMASUK UNTUK PENJANGKARAN DASAR), REL BESI L-BERLUBANG ±30 M BAHAN DALAM KONDISI DIBONGKAR, DIKEMAS DAN SIAP KIRIM, TRANSPORTASI BUKAN TANGGUNG JAWAB KAMI TRANSPORTASI DAN PPN TIDAK TERMASUK DALAM HARGA

Kondisi: hampir baru (bekas), Tahun pembuatan: 1997, Fungsionalitas: berfungsi sepenuhnya, kapasitas angkut per lengan kantilever: 900 kg, kapasitas angkut: 3.600 kg, tinggi rak: 5.585 mm, panjang total: 14.000 mm, lebar total: 2.720 mm, tinggi total: 5.585 mm, jarak gandar: 1.400 mm, jarak antara tiang: 1.400 mm, kapasitas beban per penyangga: 900 kg, panjang rak: 14.000 mm, Perlengkapan: dua sisi, CANTILEVER BAJA DUA ARAH DICAT RAL 5015 UNTUK DALAM RUANGAN SISTEM OHRA K60K MATERIAL BEKAS DILIHAT DAN DISETUJUI TERDIRI DARI: 06 TIANG & BASE IPE240 TINGGI 5585 MM, KAPASITAS/TIANG 3600 KG/MAX, 03 TIANG & BASE IPE220 TINGGI 4985 MM + PERPANJANGAN, KAPASITAS/TIANG 3600 KG/MAX, 02 TIANG & BASE IPE220 TINGGI 4285 MM, KAPASITAS/TIANG 2700 KG/MAX. PANJANG RAK 14000 MM, LEBAR TOTAL 2720 MM, 2750 MM DENGAN REL L Nedpoygddfefx Aa Uewg 88 LENGAN RAK YANG DAPAT DIPINDAHKAN DENGAN KAIT PANJANG 1250 MM, KAPASITAS 900 KG TERMASUK PENGIKAT PENGUAT, KAIT PENGHUBUNG, BAUT (TIDAK TERMASUK BAUT UNTUK FIKSASI KE LANTAI), REL BAJA PROFIL L PENUH SEPANJANG ±30 METER MATERIAL DIBONGKAR, DITEMPATKAN DI PALLET, DIKEMAS DAN DIKEMAS SIAP DIKIRIM TRANSPORTASI DAN PPN TIDAK TERMASUK DALAM HARGA

Kondisi: hampir baru (bekas), Tahun pembuatan: 2019, Fungsionalitas: berfungsi sepenuhnya, kapasitas angkut per lengan kantilever: 725 kg, kapasitas angkut: 8.700 kg, tinggi rak: 8.700 mm, panjang total: 4.700 mm, lebar total: 2.600 mm, tinggi total: 8.700 mm, jarak gandar: 1.500 mm, kedalaman tenggorokan: 1.200 mm, kapasitas muatan per bagian penyimpanan: 2.900 kg, Perlengkapan: dua sisi, Rak cantilever dalam kondisi baik Nwodpsw Uf Emefx Aa Uog

Kondisi: bekas, Tahun pembuatan: 2018, Fungsionalitas: berfungsi sepenuhnya, kapasitas muatan per bagian penyimpanan: 2.000 kg, panjang total: 4.500 mm, tinggi total: 5.180 mm, tinggi rak: 5.180 mm, kapasitas angkut: 6.000 kg, berat keseluruhan: 16.250 kg, tinggi rangka: 5.180 mm, Sistem rak penyimpanan Ohra dengan 11 unit. Dilengkapi pengaman dorong dan kisi penahan yang dilapisi seng. Lihat gambar. Nwodjya Dg Hspfx Aa Usg

Kondisi: baik (bekas), 0021 Marke: BOHR - AUSTRIA Modell: 150/330 Schleifschuh für Bandschleifmaschine Nwjdpfsi Art Eox Aa Ujg Universalschleifschuh für Bandschleifmaschinen, mit Graphitauflage, geeignet für Massivholz und Furnier – Abmessungen: 330 x 150 mm Gesamtmaße: 330 x 150 x 100 mm (Höhe) Gewicht: 4 kg

Kondisi: bekas, Tahun pembuatan: 1999, Fungsionalitas: berfungsi sepenuhnya, KALTENBACH Saw and Drilling Line – KBS 851 DGNC + APS 1003 – up to 1,000 mm – Year of manufacture 1999 General Information: Manufacturer: Kaltenbach Machine type: Automatic saw and drill line for steel profiles Bandsaw: KALTENBACH KBS 851 DGNC Drilling unit: KALTENBACH APS 1003 Year of manufacture: 1999 Condition: used, operational Location: Germany Availability: Dismantling from mid/end March 2026 Inspection: The machine is in operation and can be inspected under power Sale: without warranty or guarantee Machine Description: For sale is a complete Kaltenbach saw and drilling line for processing heavy steel profiles. The line consists of a CNC-controlled bandsaw KBS 851 DGNC and a drilling unit APS 1003, including comprehensive infeed and outfeed roller conveyors, as well as cross conveyors. The system is currently in full operation and has been reliably used in steel fabrication until recently. It is ideally suited for efficient processing of beams and profiles in both series and project production. Typical Fields of Application: - Steel construction / industrial/commercial building construction - Metalworking - Beam processing (IPE, HEA, HEB, UPN etc.) - Batch, series and one-off production Technical Data: Bandsaw KBS 851 DGNC: - Maximum beam height: up to 800 mm - Mitre cuts: swivel left and right +45° / –45° - CNC-controlled length positioning - Automatic sawing operation Drilling machine APS 1003: - Maximum beam height: up to 1,000 mm - CNC-controlled profile machining via drilling portal - Suitable for web and flange processing Roller Conveyors & Transport Systems: - Roller conveyor width: 1,000 mm - Infeed roller conveyor: approx. 15,000 mm - Outfeed roller conveyor: approx. 15,000 mm - Infeed cross conveyor: approx. 4,000 mm Nsdpfx Asyak Anea Uswg - Outfeed cross conveyor: approx. 4,000 mm Condition: - Complete and fully functional line - Currently in operation - Age- and usage-related wear and tear - Sale in as-is condition - No warranty or guarantee Scope of supply: - Bandsaw KBS 851 DGNC - Drilling machine APS 1003 - Infeed and outfeed roller conveyors - Cross conveyors at infeed and outfeed - Control cabinet / operator panel - Existing safety and protective devices - Documentation (where available) Dismantling & Loading: - Dismantling by the buyer - Dismantling possible from end of March 2026 - On-site resources available: * Forklift * 2 gantry cranes, 5 t lifting capacity each - Good access and loading conditions

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, berat keseluruhan: 35 kg, lebar dalam: 726 mm, panjang dalam: 516 mm, tinggi dalam: 305 mm, lebar total: 780 mm, tinggi total: 478 mm, panjang total: 570 mm, kapasitas angkut: 400 kg, berat kosong: 35 kg, Dijual palet pagar besi. Kondisi: bekas. Ukuran: 780x570x478 mm. Kondisi palet sesuai dengan tahun pembuatannya. Total jumlah yang dijual sekitar 500 unit. Warna: biru. Nwjdjtqtq Nopfx Aa Uog

Kondisi: bekas, Tahun pembuatan: 1999, Diameter gerinda 120 mm Tinggi center 100 mm Nwodpfjw Sybdsx Aa Ujg Perangkat gerinda muka Tidak ditemukan plat nama

Kondisi: bekas, Tenon and mortise machine, tenon cutting machine, tenoning head, mortising rotary head, finger jointing line - Mortising rotor: 2.2 kW, 5650 rpm - Mount/Spindle: Ø 30 mm - Saw motor: 3.5 kW, 2870 rpm - Boring heads: 0.8 kW, 2820 rpm - Adjustable drilling distance: 230-560 mm - Frequency inverter Perske Type: 7.5DW10/2 100 Hz 7.5 kVA - Length stop Nwsdpfscvtzlsx Aa Uog - Workpiece clamping: pneumatic - Pneumatic feed - Dimensions: 1520/1800/H1400 mm - Weight: 1600 kg

Kondisi: bekas, Machining unit, drilling automaton, drilling machine, pillar drilling machine, multi-spindle drilling machine, line drilling machine, dowel drilling machine - Drive: 1.1 kW - Speed: 2665 rpm - Threaded mount - Adjustable drilling distance: 15-65 mm Nwodpfeb A Tcpsx Aa Ueg - Quantity: 2x machining units available - Price: per piece - Weight: 23 kg/piece

Kondisi: baik (bekas), Control container, control cabinet, automation cabinet - Automation cabinet for tunnel boring operations - Manufactured by Lemme Berlin Nedpfx Aaob A Su De Uswg - Designed for bentonite pumps - Operator panel included - PLC control system - Dimensions: 600 x 350 x H1320 mm - Weight: 60 kg

Kondisi: sangat baik (bekas), Unit bor dengan kontrol Festo, saat ini terpasang pada mesin press rangka. 4 unit bor 1,5 kW. 2 unit bor 1,5 kW dengan langkah 240 mm. 2 unit dengan gearbox sudut sebagai unit gergaji. 2 unit bor dengan kepala bor 3-spindle, jarak 32 mm. Penjualan individu dimungkinkan. Nwjdpfx Ajw I R Iaoa Ueg

Kondisi: baik (bekas), Multi-spindle head, multi-spindle drilling head, dowel drilling head, fitting drilling head Njdpjb A I Ulefx Aa Uewg - Dimensions: 190/85/75 mm - Drilling pitch: 26 mm - Center drill: 5 mm offset - Quantity: 1x drilling head available - Price: per piece - Weight: 2 kg/piece

Kondisi: bekas, jarak tempuh: 439.057 km, daya: 320 kW (435,08 hp), pendaftaran pertama: 06/2011, jenis bahan bakar: diesel, berat keseluruhan: 35.000 kg, ukuran ban: 315/80R22.5, konfigurasi gandar: 8x4, jarak roda: 4.500 mm, rem: pengereman mesin, warna: hijau, kabin pengemudi: kabin harian, tipe perpindahan gigi: mekanis, kelas emisi: Euro 5, suspensi: baja, jumlah tempat duduk: 2, Perlengkapan: kabin, kopling trailer, kunci diferensial, pendingin udara,

Kondisi: baik (bekas), IMA BENZ drilling unit 10 + 11 spindles with auxiliary milling unit and horizontal drilling head 2 x 3 spindles for IMA 310 410 610 If you are looking for another drilling gearbox from Homag or IMA, please contact us or visit our shop on our website. The IMA BENZ drilling unit is a versatile and powerful tool specifically designed for the IMA 310, 410 and 610 machines. This unit features 10 + 11 drilling spindles, an additional milling unit, and a horizontal drilling head with 2 x 4 spindles. Here are some technical details: Unit No.: 4-08300 and 4-07753 Drawing No.: 000W00004824 and 000M11100819 Nsdpfxjudludj Aa Uowg Motor speed: 1max = 4800 min⁻¹ Spindle speed: 8100 min⁻¹ and 8400 min⁻¹ Drive power: 4 kW Transmission ratio: i = 1:1.69 and 1:1.75 Milling spindle: For the use of milling tools The unit is used but in functional condition, offering high productivity thanks to the capability to perform multiple drilling operations simultaneously, significantly reducing processing times.