Rak kantilever

OHRA - Kragarmregal Langgutregal L 21m 15 Ständer IPB 120 + 60 Kragarme IPE100

Kondisi: baik (bekas), Tahun pembuatan: 2020, Rotor diameter 260 mm Feed opening approx. 800 x 1200 mm Rotor length approx. 800 mm Motor 18.5 kW Technical specifications available on request Space requirement approx. 2050 x 1550 mm All information subject to change Bsdpfxjwzaizj Anxjdc

Kondisi: hampir baru (bekas), Tahun pembuatan: 2024, Double-sided cantilever rack, used: Hot-dip galvanized bolted system Scope of delivery: - 4 double-sided upright frames, height 4,160 mm with base section 1,200 mm - 24 cantilever arms, 1,200 mm depth, standard - Including horizontal and diagonal bracing for 1,300 mm axle spacing - Including fastening material (without floor anchors) Bodpsh Ek Dajfx Anxodc - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts and extensions available at any time) - (*Also available in larger quantities: 20 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles - Surface of all components hot-dip galvanized - Load capacity per upright side: 2,250 kg - Load capacity per cantilever arm: 750 kg - Cantilever arms height-adjustable in 100 mm increments - Each upright equipped with 6 bolted cantilever arms and 2 standard base elements, each 1,200 mm deep = 4 storage levels per rack side - Including horizontal and diagonal bracing for 1,300 mm spacing - Rack length: 4,000 mm - Including fastening material (without floor anchors) - Supplied with assembly instructions and C4 load capacity signage according to DIN standard - Expert telephone consultation available - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable shipping with advance notice prior to delivery. The material is sensibly packed to allow for easy unloading. Note: When installed outdoors, load capacities must be reduced due to wind and snow loads. The foundation must be concrete, level, suitable for dowelling, and able to support the intended loads. The customer is responsible for checking and ensuring the ground condition, load-bearing capacity, and any necessary permits. The uprights must be anchored to the floor by the customer; wall anchoring is neither necessary nor recommended. According to trade association recommendations, the uprights should have at least 500 mm overlap above the top storage level.

Kondisi: baik (bekas), Tahun pembuatan: 2006, Drum chipper, high-speed model with horizontal feed Maximum infeed width: 450 mm Bodpfou Rl Ruex Anxedc Maximum infeed height: 140 mm Motor: 75 kW Equipped with frequency converter for variable speed No vibrating chute included

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2026, S&F Drum Chipper Type ATH 220x530/3 Demonstration Machine / Trade Fair Machine / New Machine Robust construction for long service life Feed height: 200 mm Feed width: 500 mm Number of chipper blades: 2 units Number of counter blades: 1 unit Rotor diameter: 520 mm (solid steel rotor) Number of feed rollers: 3 units Throughput capacity: up to approx. 20 cubic meters per hour* Chip length: approx. 30 mm Chipper drive power: 45 kW or as agreed Feed roller drive power: 2 x 2.2 kW Operating / control voltage: 400/220 V, 50 Hz Weight: 2,600 kg *Depending on chip length, main motor kW rating, blade count, and feed method S&F chippers and drum chippers with horizontal feed are used in various sectors of the wood processing industry (sawmills, timber plants). Chippers of the “ATH” series produce high-quality, homogeneous wood chips from wood residues with minimal fines, e.g., as premium chips for the cellulose industry or as fuel chips for energy generation. Advantages: - Maximum throughput - Low fines content Bdsdpfjw I R Rnox Anxsc - Low maintenance - Versatile application - Custom manufacturing available Need more information? Contact us! We are happy to advise you. Drum chipper | Wood chipper | Chipper | Chipping machine | Wood chipping machine | Shredder | Wood crusher

Kondisi: baik (bekas), Tinggi pusat: 125 mm Bdsdpfx Aneyu R H Nexjc Jarak pusat: 800 mm Diameter pembubutan terbesar di atas ranjang/rel: 280/245 mm Kepala spindle, ulir sesuai DIN 800 Lubang spindle: 24 mm Kecepatan spindle dapat diatur tanpa langkah: 26 - 2000 rpm 36 langkah pemakan memanjang: 0,019 - 0,528 mm Ulir metrik: 0,25 - 6 mm 44 ulir inci: 4 - 112 TPI Koneksi listrik: 380 V, 0,7/1,4 kW Kebutuhan tempat: Berat sekitar: 500 kg

Kondisi: hampir baru (bekas), Tahun pembuatan: 2024, Used double-sided cantilever racking: Hot-dip galvanized bolted system Scope of delivery: - 4 double-sided uprights, height 3,500 mm, with bases, each 1,200 mm - 24 cantilever arms, 1,200 mm deep, standard - Incl. longitudinal and diagonal bracing for 1,300 mm axle spacing - Incl. mounting material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts reorder and extension possible at any time) - (*Also available in larger quantities: 20 uprights in stock) Detailed description: - Sturdy steel construction made from IPE profiles - All components hot-dip galvanized - Load capacity per upright side 2,250 kg - Load capacity per cantilever arm 750 kg - Cantilever arms height-adjustable in 100 mm increments - Each upright with 6 bolted cantilever arms and 2 base plates, depth 1,200 mm, standard = 4 storage levels per upright side - Including longitudinal and diagonal bracing for 1,300 mm spacing - Rack length: 4,000 mm - Including mounting material (without floor anchors) - With assembly instructions and load signs C4 according to DIN standard - Expert telephone consultation - Made in Germany - Short delivery times - On-site pickup possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable shipping with advance notification before delivery. Material is packed sensibly for easy unloading. Bsdpemkixwjfx Anxedc When installed outdoors, the load capacities are reduced due to wind and snow loads. The subsoil must be concrete, level, suitable for doweling, and able to withstand the loads. The floor condition, bearing capacity, and any required building permits must be checked and ensured by the customer. The uprights must be anchored to the floor on site; wall anchoring is neither required nor recommended. According to occupational health and safety, it is recommended that the racks have a projection of at least 500 mm above the top storage level.

Kondisi: baru, Tahun pembuatan: 2025, CNC-controlled boring, gluing, and dowel inserting machine Complete in standard configuration with: - Support with linear guide consisting of: 1 pc. single-spindle horizontal boring unit, motor 0.65 kW, stroke 70 mm Bedpfx Anow Sgm Hjxjdc Tool speed selectable via operator software (3,000/5,000/8,000 rpm) 1 pc. blow-out, gluing, and dowel inserting station for dowels Ø 8 mm, dowel length 25–50 mm - Fully automatic, electronically controlled central lubrication - X-axis controlled by NC, working length 700 mm, max. rapid traverse speed 95 m/min - Z-axis adjustable manually via mechanical digital counter, position on support table 5–40 mm - Dowel insertion projection adjustable from 7–20 mm via mechanical digital counter, drilling depth from 0–35 mm (with drill bit length TL 70 mm) is automatically set with insertion projection - Closed glue system with 6 bar glue pressure through glue nozzle, for glues with viscosity from 150 to 350 mPas - Glue quantity continuously adjustable via operator software - Selector switch GLUE/WATER for flushing the glue system, each with: 1 stainless steel container for 7.5 kg glue and 7.5 l water - Control lamp indicating residual glue level in the glue container - 1 pc. left side fence, 1 pc. right side fence (both removable) - 2 pc. start buttons for individual operation with 1 or 2 workpieces - 2 pc. pneumatic angled clamping cylinders 10° for workpiece thicknesses up to max. 80 mm, workpiece length (Y) min. 70 mm - 1 pc. extraction hood, connection Ø 80 mm - 1 pc. TCT control with: Built-in industrial PC, incl. soft PLC type Beckhoff TWINCAT, operating temperature range 0–50°C, TFT industrial display 15" capacitive touchscreen, operating system: WINDOWS 10 IoT LTSC (long term support channel) - Programming via menu-guided user software, freely programmable boring distances with ABSOLUTE, RELATIVE, or GRID dimensioning, automatic workpiece mirroring and operation optimization, two work zones assignable with different programs, graphical workpiece display, parametric programming, zero-point offset, programmable work lists, clear-text fault diagnosis - Integrated options: - Electronic optical glue monitoring system G.I.C. (Glue Insert Control) for 1 pc. glue nozzle, item no. 0470-0810 - 1 EASY CLEAN system for automatic test glue shots before start of the operating program drilling/gluing/dowel insertion. E.C.S. for 1 pc. glue nozzle, item no. 0471-Z010 - 1 single-spindle vertical boring unit, drilling from above, 0.65 kW (3,000/5,000/8,000 rpm), position (Y) adjustable manually via mechanical digital counter Adjustable from 5–40 mm, drilling depth (Z) max. 30 mm (with drill bit length TL 57 mm) Workpiece thickness (Z) max. 50 mm, workpiece length (Y) min. 130 mm (incl. drilling depth compensation, e.g. for Häfele Minifix) item no. 0471-0830 - 4 vertical angled clamping cylinders 10° with holder, additionally, item no. 0470-0850 Available: at short notice

Kondisi: bekas, de-to-hu-it-lt-lv-nb-pl-pt-001 Bdodpewub H Iefx Anxoc

Kondisi: bekas, Stacking box 6422 - used Manufacturer: Stucki Color: Green Material: Polypropylene Bjdpfxswg Ex Eo Anxodc Closed hand grip External dimensions: 600x400x220 mm (LxWxH) Internal dimensions: approx. 564x366x202 mm (LxWxH) Volume: 42 liters Maximum load capacity: 30 kg Base with water drainage holes

Kondisi: bekas, Tahun pembuatan: 1984, kapasitas angkut: 3.200 kg, Saat ini masih tersedia 3 unit di stok. Derek Girder Tunggal Semi-Portal Produsen: Christmann & Pfeifer KG Unit angkat: Demag Tipe: PLV 168 NF Kapasitas angkat: 3.200 kg Under carriage: Demag Tipe: 13/6PF 12/4 Jarak kait yang dapat digunakan: 4.800 mm Jarak antara pusat rel: 8.110 mm Berat: sekitar 2 ton/unit Harga per unit, siap muat. Bjdpfx Anow Ugu Aexjdc Derek sudah dibongkar dan dikemas siap kirim. Mesin dapat dilihat langsung di lokasi. Semua data tanpa jaminan. Penjualan diutamakan untuk yang lebih dulu membeli.