Beli Peralatan Meja Las bekas (38.638)

Kondisi: baru, Tahun pembuatan: 2025, kapasitas angkut: 10.000 kg, Perangkat pengangkat dan pemutar kolom dengan kapasitas angkat 10 ton, tersedia sebagai paket set atau satuan. Digerakkan pada kedua sisi. Mesin ditawarkan sebagai set sinkron atau satuan. Protec alat pembalik/posisi Syncrolift. Kolom ganda, kendali jarak jauh nirkabel dan manual. Penyesuaian kolom dapat digerakkan secara elektrik dua kali. Kapasitas angkat 10.000 kg, 360°. Tinggi kerja minimal: 800 mm. Tinggi kerja maksimal: 1700 mm. Kecepatan: 0,5 putaran/menit. Diameter pelat penjepit: 900 mm. Gerak putar: 2 x 2,2 kW. Torsi putar: 18.950 Nm. Mesin juga tersedia secara satuan sebagai model mono (lebih ekonomis). Tersedia flange sendi (flange kardan) sesuai permintaan. Gedpswtxxrofx Aa Hjug

Kondisi: bekas, ESS rotary welding table, model DT 50 Serial no. 86 / 1125, year of manufacture: 1986 Max. load capacity: 50 kg Faceplate diameter: 300 mm Faceplate rotation speed: 0.19 to 5.7 rpm Control voltage: 24 volts Motor power: 100 watts Mains connection: 220 volts, 50 Hz - Faceplate infinitely adjustable up to 180° tilt - Speed control via rotary potentiometer - Clockwise and counterclockwise rotation - Foot pedal - 2-stroke and 4-stroke operation - Slip ring contact for ground, up to 200 amps - New ESS PS3 control, built in 2009 Installation dimensions (LxWxH): 600 x 500 x 350 mm Weight: 45 kg Very good condition Gsdpfxjrwq Uro Aa Houg

Kondisi: baru, Clamping range of chuck 120 - 380 mm Height 95 mm Passage 170 mm Outer diameter of chuck 400 mm Outer diameter of clamping lever 600 mm Weight 26 kg Features: • Self-centering. • Reversible jaws. • Fixed clamping levers enable quick workpiece changes. • Low weight and flat design result in minimal change of the center of gravity. Godpjfv Awtsfx Aa Heug The D-D quick-change chuck enables rapid product changes and is excellently suited for frequent component exchanges. No separate quick-change key is required, as the levers are integrated into the quick-change chuck.

Kondisi: baru, Clamping range of the chuck: 80 - 280 mm Height: 67.5 mm Through-hole: 100 mm Outer diameter of chuck: 300 mm Outer diameter of clamping lever: 480 mm Weight: 13 kg Features: • Self-centering. • Reversible jaws. • Fixed clamping levers enable rapid workpiece changes. Guodpfjfv Awpjx Aa Hsg • Low weight and flat design ensure minimal shift in center of gravity. The D-D quick-change chuck enables fast product changeovers and is ideal for frequent component changes. No separate quick-release wrench is required, as the levers are integrated into the quick-change chuck.

Kondisi: baru, Clamping range of chuck: 10 – 200 mm Height: 67.5 mm Bore: 65 mm Gujdpfxjfv Awls Aa Heg Outer diameter (chuck): 200 mm Outer diameter (clamping lever): 360 mm Weight: 4 kg Features: • Self-centering • Reversible jaws • Fixed clamping levers allow for rapid workpiece changeover • Lightweight, low-profile design minimally affects the center of gravity The D-D quick-action chuck allows for rapid product changeovers and is ideal for frequent part swaps. No loose quick-release wrench is required, as the levers are integrated into the quick-action chuck.

Kondisi: baru, Clamping range of the chuck: 200 - 500 mm Height: 110 mm Passage: 240 mm Outer diameter of the chuck: 320 mm Outer diameter of the clamping lever: 700 mm Weight: 56 kg Gjdpfxjfv Awwo Aa Heug Features: • Self-centering. • Reversible jaws. • Fixed clamping levers allow for rapid workpiece changes. • Low weight and flat design cause minimal shift in the center of gravity. The D-D quick-action chuck allows for fast product changes and is ideally suited for frequent component changeovers. No separate quick-action key is required, as the levers are integrated into the quick-action chuck.

Kondisi: baru, Set of 29 pieces Hole diameter: 16 mm Gujdpfx Aogarhvoa Heg Condition: new Weight: 11 kg Set 1, 29-piece, 16 mm system, consisting of: Clamps: 4 x 160610 Pins: 12 x 160511 Stop blocks: 4 x 160420.N Angle plates: 4 x 160108.N Angle plates: 4 x 160110.N Accessory kit: 1 x 163999 Price stated is exclusive of packaging and transport.

Kondisi: baru, Quantity: 37 items Hole diameter: 28 mm Condition: new Weight: 29 kg Basic Set 1, 37-piece, 28 mm system, consisting of: Clamps: 4 x 280604 Pins: 8 x 280511 Stops: 6 x 280420.N Angle brackets: 2 x 280110.G Threaded pins: 8 x 280543 Stop: 8 x 160415 Accessory set: 1 x 163999 Gusdpfogazl Rox Aa Hjg Price stated plus packaging and transport.

Kondisi: baru, Number of items: 57 positions Gusdpfxjgazmro Aa Hsg Bore diameter: 22 mm Condition: new Weight: 66 kg Set 2, consisting of 57 pieces, 22 mm system: Clamps: 6 × 220610.1 Clamps: 4 × 220630.1 Prism: 4 × 220645.1 Pins: 18 × 220511 Magnetic pins: 4 × 220740 Stop: 6 × 220410.N Stop: 6 × 220420.N Stop: 2 × 220426.N Angle: 4 × 220110.N Angle: 2 × 220152.N Accessory set: 1 × 223999 Price given is exclusive of packaging and transport costs.

Kondisi: baru, Number of items: 27 positions Weight: 52 kg Condition: new Hole diameter: 28 mm P-Set 1: 27 pieces, 28 mm system (for 15 mm table thickness), consisting of: Clamps: 5 pcs. Sk.100/350 mm Stop: 2 pcs. 500 mm Stop: 2 pcs. 150 mm Angle: 2 pcs. 175 x 175 mm Flat angle: 2 pcs. 350 x 250 mm Flat angle: 2 pcs. 275 x 150 mm Eccentric discs: 2 pcs. 100 mm Quick-release screws: 10 pcs. Number of items: 33 positions Weight: 52 kg Condition: new Hole diameter: 28 mm Gujdpfx Asgp Dyusa Hjg

Kondisi: baru, Number of items: 57 Weight: 98 kg Condition: New Hole diameter: 28 mm Set 2: 57-piece, 28mm system, consisting of: Clamps: 6 x 280610.N Guodpfofh Uw Rsx Aa Hog Clamps: 4 x 280630.N Prism blocks: 4 x 280648.1.N Pins: 18 x 160511 Magnetic pins: 4 x 280740 Stops: 6 x 280410.N Stops: 6 x 280420.N Angles: 4 x 160110.N Angles: 2 x 280152.N Angles: 2 x 280162.N Accessory set: 1 x 283999 Price stated is exclusive of packaging and transport.

Kondisi: baru, Number of items: 33 Weight: 52 kg Gsdpfx Aasfh N Eko Hsug Condition: new Hole diameter: 28 mm Set 1: 33-piece, 28 mm system, consisting of: Clamps: 4 x 280610.N Clamps: 2 x 280630.N Prisms: 2 x 280648.1.N Pins: 12 x 160511 Stops: 4 x 280410.N Stops: 4 x 280420.N Angles: 2 x 160110.N Angles: 2 x 280152.N Accessory set: 1 x 283999 Price quoted is excluding packaging and transport.

Kondisi: baru, Set of 55 pieces, 16 mm system, consisting of: Clamps: 6 x 160610 Clamps: 2 x 160630 Gsdpogarhyjfx Aa Hsug Prism: 4 x 160645.1.N Pin: 18 x 160511 Stop: 4 x 160410.N Stop: 6 x 160420.N Angle: 6 x 160108.N Angle: 6 x 160110.N Angle: 2 x 160162.N Accessory Set: 1 x 163999 Number of positions: 55 Hole diameter: 16 mm Condition: new Weight: 23 kg Price indicated plus packaging and transport.

Kondisi: baru, Special set, 96 pieces, 28 mm system, comprising: Number of positions: 96 Weight: 600 kg Condition: New Hole diameter: 28 mm Includes: - 1x tool trolley - 30x quick-release bolts with short twist lock, without O-rings - 8x universal stops 150 L - nitrided - 4x universal stops 225 L - nitrided Guodjd Rmbnspfx Aa Heg - 8x stop and clamping angles 175 L - cast - 2x stop and clamping angles 500 G left - nitrided - 1x stop and clamping angle 750 G left - nitrided - 1x stop and clamping angle 750 G right - nitrided - 1x stop and clamping angle 500 G left - nitrided - 1x stop and clamping angle 500 G right - nitrided - 4x stop and clamping angles 300 G left - nitrided - 8x prism Ø60-135° blackened - with collar, complete with screw collar and countersunk head - 16x professional screw clamp - nitrided - 6x professional screw clamp 45°/90° - nitrided - 4x universal stop 300 - nitrided - 1x accessory set consisting of: eccentric cam, Allen key, brush, dressing stone, CleanBasic sample, non-stick sample, and torch holder. ATTENTION! This tooling is designed for 25 mm table thickness.

Kondisi: seperti baru (mesin pameran), Container turning device, welding table, welding positioner, roller stand Load capacity: 3,000 kg With foot remote control Gedpfxjd An Aae Aa Hsug Continuously variable speed control: 80 to 1,600 mm/min Suitable for diameters: 40 mm to 1,400 mm Roller diameter: 200 mm Dimensions (L x W x H): 800 x 370 x 450 mm Model and color deviation possible

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2026, Fungsionalitas: berfungsi sepenuhnya, lebar meja: 1.000 mm, panjang meja: 2.000 mm, tinggi pelat: 15 mm, RINCIAN TEKNIS Panjang meja: 2.000 mm Lebar meja: 1.000 mm Ketebalan permukaan meja: 15 mm Gujdpfezxcmhsx Aa Hog RINCIAN MESIN Material: Logam yang dikeraskan Dimensi (P x L x T): 2.000 x 1.000 x 500 mm PERALATAN Alat-alat

Kondisi: bekas, Mesin las gas pelindung MIG/MAG impuls EWM Tipe Phoenix 301 Progress Puls Force Arc Nomor Seri: Nomor Artikel: Tahun Pembuatan 2007 Daya 300 Amp = 60% siklus kerja 250 Amp = 100% siklus kerja Rentang pengaturan: tanpa langkah Tegangan tanpa beban: sekitar 29 Volt Koneksi jaringan: 400 Volt, 50 Hz, 16 Amp, dengan steker - Tampilan digital untuk tegangan dan arus - Pengaturan puls - Berbagai program las yang dapat dipilih - Las 2 tak, 4 tak, dan titik - Berpendingin air - Paket selang 4 meter BARU, dengan koneksi sentral - Pengatur tekanan gas las BARU - Mesin las dilengkapi dengan kawat las 1,2 mm Ukuran (P x L x T): 900 x 660 x 1550 mm Berat: sekitar 160 kg Kondisi bagus - berfungsi dengan baik - siap untuk didemonstrasikan Gusdpfx Aez Afhioa Hsg

Kondisi: baik (bekas), Ukuran: 165 cm x 114 cm x 26 cm Guodpfx Aajzi R Nxj Hsg Berat: 1310 kg Ukuran meja: 1500 x 980 x 110 mm

Kondisi: baru, Zustand: Neu Lieferzeit: ca. 6–8 Wochen ab Auftragserteilung Gujdpfx Aeyq Sqzja Hjg Preis: 10.265 € Leasingrate: 197,09 € Arbeitsbereich: 4.000 x 2.000 mm Tischhöhe: 850 mm Maximale Traglast: 8.000 kg Eigengewicht: 2.340 kg Seitenwangenhöhe: 200 mm Bohrungsdurchmesser: 28 mm Unsere Premium-Tischsysteme mit 28-mm-Bohrungsraster setzen Maßstäbe für den gewerblichen und industriellen Einsatz. Die 3D-Konstruktionen bilden die Grundlage des gesamten Systems und sind beliebig von allen fünf Seiten erweiterbar. * Komplett gefräste Tischplatte (25 mm) aus S355J2+N-Stahl mit hoher Maßgenauigkeit (+/- 0,05 mm), abgerundeten Kanten und Bohrungen * Härteverchromte Tischoberfläche CR75M+ – Die neue CR75M+-Beschichtung bietet durch einen verlängerten und intensiven Härteprozess eine besonders dichte Chromstruktur. Dies verbessert bekannte Eigenschaften wie Langlebigkeit und Widerstandsfähigkeit noch weiter. Die matte Oberfläche ist deutlich beständiger gegen Kratzer und optische Abnutzung. Die bewährte Mindesthärte von 750 HV sowie die elektrische Leitfähigkeit bleiben selbstverständlich erhalten. * Exakte Maß- und Passgenauigkeit für Werkzeuge mit 28-mm-Bohrung – kompatibel zu vergleichbaren Premiumanbietern * Rasterlinien im 100 x 100 mm Abstand * Massive Standard-Fußelemente (Traglast: 2 t/Fuß). Beim optionalen Rollensystem: 700 kg pro Fuß * Verschiedene Fußvarianten wählbar: Standard, höhenverstellbar, oder mit Rollen * Rundum 200 mm hohe Seitenwangen mit dreireihigem Bohrbild (Ober-/Unterseite, im 50-mm-Abstand) * Beidseitige Millimeter-Skalierung * Unterkonstruktion mit Aussteifungen * Maximale Traglast: 8 t

Kondisi: baru, Condition: new Delivery time: approx. 2–4 weeks from order Price: €995 Working area: 1200 x 800 mm Gsdpfsyq Sugsx Aa Heug Weight: 150 kg Bore diameter: 16 mm OUR 2D TABLE SYSTEMS WITH 16MM HOLE GRID ARE DESIGNED FOR ECONOMICAL ENTRY AS WELL AS THE MACHINING OF LIGHTER AND SMALLER WORKPIECES. THESE CAN BE USED FLEXIBLY AND EXPANDED IN A MODULAR DESIGN. Our tables impress with their high hardness due to our CR75M+ HARD CHROME PLATING, their outstanding accuracy of +/- 0.05 mm across the entire table surface, and the tight tolerances of the hole diameters in the entire hole grid. 2D Standard Welding and Clamping Table, 1200 x 800 mm with hardness coating Cr75M+ Table system: 16mm Material thickness: 12mm Including table substructure and standard table legs * S355J2+N with hardening process Cr75M+ * Bore diameter: 16 mm, material thickness: 12 mm * Including coated table substructure * Tabletop with double-sided fine graduation and 50 x 50 mm grid lines * Edges and bores rounded * Maximum recommended total load per m²: 500 kg (standard foot); with castor model: 150 kg per foot

Kondisi: baru, Condition: new Stock number: 2486 Delivery time: immediate, subject to prior sale Guodowirlqepfx Aa Heg Price: €545 In stock: 1 Bore: 28 mm Tools are not included in the price.

Kondisi: bekas, USED CONDITION Stock number: 2468D Delivery time: immediate, subject to prior sale Country of origin: Germany Price: €2,970 Stock: 1 unit Special price: €1,890 Weight: 195 kg Hole diameter: 28 mm DEMO SET / AS NEW CONDITION Consisting of: * 1x accessory trolley (supplied galvanized) * 4x fixed stop angles 350 x 20 mm * 4x adjustable stop angles 250 x 20 mm * 15x adjustable clamps * 4x multi-clamps * 6x adjustable support brackets 175 x 20 mm * 2x adjustable support brackets 225 x 21 mm * 8x stop rails 225 x 20 mm * 10x dowel pins * 15x plug-in holders Gsdpfxeyq Spqe Aa Hjug * 3x ball locking pins * 4x claw clamp bolts 28 x 100 mm * 15x spacer rings

Kondisi: baru, neu-werkzeugsatz-his16 Gujdpfeyq Sp Rsx Aa Hjg

Kondisi: baru, Translation into English for use in the context of Machineseeker or TruckScout24 listings: Condition: New Delivery time: approx. 2 – 4 weeks from order Price: €1,190 Working area: 1000 x 1000 mm Table height: 850 mm Weight: 210 kg Worktop thickness: 25 mm Bore diameter: 28 mm OUR 2D TABLE SYSTEMS WITH A 28MM HOLE GRID ARE DESIGNED FOR COST-EFFECTIVE ENTRY AND FOR MACHINING LIGHTER AND SMALLER WORKPIECES. THESE TABLES CAN BE USED FLEXIBLY, AS WELL AS IN MODULAR CONSTRUCTION AND EXTENDED AS NEEDED. Our tables impress with their high degree of surface hardness due to our CR75M+ HARD CHROME PLATING, the very high precision of +/- 0.05 mm across the entire tabletop, and the tight tolerances of all hole diameters within the hole grid. 2D Standard Welding and Clamping Table, 1000 x 1000 x 25 with Cr75M+ hardened coating Table system: 28 mm Material thickness: 25 mm Including table substructure and standard table legs * S355J2+N with Cr75M+ hardening process * Including coated table frame * Tabletop with double-sided fine scaling and 50 x 50 mm grid markings Gusdpfx Aewirg Uoa Heg * Edges and holes rounded * Maximum recommended load per m²: 500 kg (standard foot); for roller model 150 kg per foot

Kondisi: baru, Condition: New Delivery time: approx. 2–4 weeks from order Price: €1,490 Working area: 1500 x 1000 mm Gedpfx Aswirg Ija Hsug Table height: 850 mm Weight: 344 kg Bore diameter: 28 mm OUR 2D TABLE SYSTEMS WITH 28 MM HOLE GRID ARE DESIGNED FOR COST-EFFECTIVE ENTRY AS WELL AS FOR WORKING WITH LIGHTER AND SMALLER WORKPIECES. THESE SYSTEMS CAN BE USED FLEXIBLY AND COMBINED IN A MODULAR DESIGN FOR EXPANSION. Our tables stand out due to the high degree of hardness provided by our CR75M+ HARD CHROME PLATING, an exceptional accuracy of +/- 0.05 mm across the entire table surface, and tight borehole diameter tolerances throughout the hole matrix. 2D Standard Welding and Clamping Table, 1500 x 1000 x 25 mm with Cr75M+ hardened coating Table system: 28 mm Material thickness: 25 mm Including table substructure and standard table legs * S355J2+N with Cr75M+ hardening process * Coated table substructure included * Tabletop with two-sided fine scaling and 50 x 50 mm grid lines * Rounded edges and boreholes * Recommended max. total load per m²: 500 kg (standard legs); for caster model: 150 kg per leg