Beli Presona Ballenpresse 50 T, Antrieb 22 Kw Mit Wirbulator bekas (105.637)

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 2005, jam operasional: 30.408 h, Fungsionalitas: berfungsi sepenuhnya, gaya penekanan: 50 t, lebar bukaan pengisian: 1.250 mm, panjang bukaan pengisian: 1.100 mm, lebar bal: 1.100 mm, tinggi bal: 720 mm, berat bal: 550 kg, berat keseluruhan: 16.000 kg, kapasitas tangki oli: 600 l, daya: 22 kW (29,91 hp), tahun perombakan terakhir: 2025, laju aliran volumetrik: 530 m³/jam, Technical Data – Baler: Rodpfxey R Npis Amusu Manufacturer: Presona AB Model: LP 50 EH1 Year of manufacture: 2005 Operating hours: 30,408 hours (as of April) Number of bales produced: 198,059 pieces (as of April) Main press force: 50 t Specific pressure: 63 N/cm² Theoretical throughput: 530 m³/hour Throughput under operating conditions: 260 m³/hour Feed hopper dimensions: 1,250 x 1,100 mm Press chamber volume: 2.2 m³ Bale dimensions: 1,100 x 720 mm, variable length Drive power: 22 kW Tying: 5-fold vertical, fully automatic Throughput rates at bulk density of: - 30 kg/m³: 6 to 7 t/hour - 50 kg/m³: 7 to 9 t/hour - 100 kg/m³: 11 to 14 t/hour Bale density (paper/newspapers): 400 to 550 kg/m³ Hydraulic oil tank capacity: 600 l PLC control: Telemecanique TSX Micro Control panel: Schneider Magelis Transport dimensions (excluding baler): 8,125 x 2,300 x 3,000 mm (L x W x H) Transport weight (baler): approx. 16 t Condition of the Baler: The machine has been partly overhauled in our workshop and general maintenance work has been carried out. Upon completion of the refurbishment, the baler was tested during operation and is now ready for immediate sale. The following refurbishment work has been carried out: General work: - Machine cleaned, derusted, primed, partially repainted - Wire feed marks in the feed channel welded and smoothed Hydraulic unit: - Hydraulic oil tank drained, tank cleaned, refilled with new oil - Oil filter and air filter replaced - Leaking oil sight glass on hydraulic oil tank replaced - All hydraulic hoses replaced Electrics: - Program menu language set to English - Two key switches in the control panel replaced - Control cabinet replaced - Signal lamp on the control cabinet replaced - Flap limit switch replaced - Electrical system of the agitator replaced, connected, and tested Press ram: - All four rollers on the press ram removed and replaced - Main hydraulic cylinder disassembled, overhauled, cylinder tube honed, all seals replaced, leak test conducted - All plastic wear blocks on the press ram replaced Pre-press flap: - Both bearings on the shaft of the pre-press replaced - Both hydraulic cylinders disassembled, overhauled, both cylinder tubes honed, all seal kits replaced, leak test conducted - Scraper flap on the pre-press replaced Tying system: - Two complete needles with wire redirect rollers replaced - Needles adjusted and set - All wire redirect rollers in the needle heads replaced - Twister finger replaced - Two twister shafts replaced - All 8 wear plates on the twister, under the twister fingers, replaced Scope of delivery: Only the baler is being sold. All documentation (operating manual, CE declaration, electrical/hydraulic circuit diagrams) is fully available. Inspection possible by appointment. We do not accept liability for the technical information and possible errors.

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 2007, jam operasional: 13.209 h, Fungsionalitas: berfungsi sepenuhnya, gaya penekanan: 50 t, lebar bukaan pengisian: 1.250 mm, panjang bukaan pengisian: 1.050 mm, lebar bal: 100 mm, tinggi bal: 700 mm, berat bal: 500 kg, berat keseluruhan: 8.500 kg, kapasitas tangki oli: 400 l, daya: 15 kW (20,39 hp), tahun perombakan terakhir: 2026, laju aliran volumetrik: 108 m³/jam, Technical Data – Baler: Manufacturer (as per nameplate): BRAMIDAN (original manufacturer Presto GmbH & Co. KG) Model: HC 50 (corresponds to Presto HPK 50) Year of manufacture: 2007 Operating hours: 13,209 hours (as of March 2026) Number of bales produced: 23,379 pieces Pressing force: 50 t Specific pressing force: 650 kN/m² Fill chute dimensions: 1250 x 1050 mm (L x W) Filling volume: 0.96 m³ Theoretical cycle time: 32 seconds Theoretical throughput: 108 m³/hour Bale dimensions: 1100 x 700 mm (W x H), length variable Drive power: 15 kW Total current consumption: 50 A Tying: 4-fold vertical, fully automatic Throughput rates with bulk density of: - 30 kg/m³: approx. 3.1 t/hour - 60 kg/m³: approx. 4.5 t/hour - 100 kg/m³: approx. 7.2 t/hour Bale weights at a bale length of approx. 1.2 m: up to 500 kg, depending on material Hydraulic oil tank capacity: 400 l PLC control: Siemens S7-200 Rjdpjy R Npcefx Amuju Effective transport dimensions (press only): 6850 x 1950 x 2650 mm (L x W x H) Transport weight (press): 8.5 t Condition of the baler: The baler was used in an operational production environment exclusively for compacting cardboard, and has been serviced regularly. With only 13,209 operating hours, the machine has relatively low hours. The baler has been partially overhauled and thoroughly tested in our workshop. The following overhaul work has been completed: - Machine cleaned - Bale retaining claws freed up and lubricated - Photoelectric sensor replaced - Twister unit fully dismantled, disassembled, all bearings replaced, all plastic guides replaced, lubricated, chain tension adjusted - Knives and counter-knives dismantled, sharpened, and reinstalled - Knife gap readjusted - General maintenance work carried out and lubricated Scope of delivery: - 1 x baler with wire spool boxes (without wire) (6850 x 1950 x 2650 mm) - 1 x bale chute (5100 x 1150 x 450 mm) - 1 x wire reel box for floor-mounting (1450 x 380 x 360 mm) For transport of the baler, a tautliner with an effective internal height of 2700 mm is required. Remarks: A complete set of documentation (operating manual, CE declaration, electrical/hydraulic circuit diagrams) is available. Inspection by appointment is possible. We accept no liability for technical specifications or possible errors.

Kondisi: bekas, berat kosong: 7.540 kg, berat muatan maksimum: 14.460 kg, berat keseluruhan: 22.000 kg, konfigurasi gandar: 1 as, pendaftaran pertama: 08/2001, panjang ruang muatan: 10.450 mm, lebar ruang muat: 2.430 mm, tinggi ruang muatan: 1.000 mm, warna: hijau, jarak tempuh: 1.001 km, tipe perpindahan gigi: lain, kabin pengemudi: lain, Perlengkapan: derek,

Kondisi: sangat baik (bekas), Tahun pembuatan: 2005, rgl50-brenner-angebot Rjdpfx Amjzabnnjuju

Kondisi: sangat baik (bekas), Tahun pembuatan: 2004, de-001 Redpfswg Hg Rex Amueu

Kondisi: baik (bekas), 25 linear meters of tire racking Used equipment, in very good condition, see pictures Height: 2.5 m Depth: 50 cm Bay load: 9,000 kg Beam length: 2.1 m Beam load capacity per level: 1,000 kg Negotiable price: €1,950 net ex stock Offer includes: + 12 assembled frames, 9 t bay load, depth 50 cm, height 2.5 m + 66 beams, length 2.1 m, 1,000 kg load per level + 132 locking pins + 24 concrete anchors + Load capacity signs Alternative configurations available upon request! Goods are in stock. Transport and installation available on request. Inspection possible at any time by appointment. Rsdpfx Ajfdik Iomuju Further information available upon request. Constantly over 5,000 linear meters of pallet racking from numerous manufacturers in stock. (Specifications, details and prices subject to change or error; interim sale reserved! See our terms and conditions, all prices excl. VAT ex stock) Purchase / Sale: We are constantly seeking and offering numerous items from a wide range of sectors: – Broom-clean site clearances – Company liquidations – Fast – flexible – efficient! – We also clear and/or dispose for insolvency administrators. Just email us a few key details and we will get back to you promptly. To visit our page, please click on our logo!

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, daya: 22,9 kW (31,14 hp), jenis bahan bakar: diesel, warna: oranye, berat operasi: 2.190 kg, Tahun pembuatan: 2016, jam operasional: 6.100 h, Perlengkapan: kabin, Hamm HD10 VT Kombiwalze mit Kabine (2016) 6.100 Betriebsstunden 22,9 kW Kubota Motor 2.190 - 3.110 kg Rjdpfx Amjzap Ivouju Kantenschneiderad

Kondisi: siap digunakan (bekas), Indramat TVM 2.1-50-220/300-W1-220/380 AC Servo Power Supply, serial no. as per photo, used, professionally fully overhauled and tested with 12 months warranty, 100% fully functional, scope of delivery as per photos. Rsdpfx Amei Ebrgoueu

Kondisi: siap digunakan (bekas), Lenze DFVARS 071-22 servomotor SN: 0237500 dengan kipas A2S 107-AA01-31, bekas, kondisi terawat baik, 100% berfungsi, pengiriman sesuai foto. Rjdpfx Asy Npgfjmusu

Kondisi: siap digunakan (bekas), Trumpf 150 AQ VIS Lensa Fokus Laser 22-43-83-00/02 dengan 22-43-82-00/01 dan 22-27-04-00/05, bekas, kondisi terawat dengan baik, 100% berfungsi, cakupan pengiriman sesuai foto. Redpfxex Eu Uaj Amuou

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 2012, jam operasional: 25.895 h, Fungsionalitas: berfungsi sepenuhnya, gaya penekanan: 80 t, lebar bukaan pengisian: 1.100 mm, panjang bukaan pengisian: 1.500 mm, lebar bal: 1.100 mm, tinggi bal: 750 mm, berat bal: 600 kg, berat keseluruhan: 24.000 kg, kapasitas tangki oli: 1.000 l, tahun perombakan terakhir: 2026, laju aliran volumetrik: 930 m³/jam, Technical Data — Baler: Manufacturer: Presona AB Type: LP 80 VHK 1 Year of manufacture: 2012 Total operating hours (machine): 25,895 hours (as of July 2025) Effective pump operating hours: 14,135 hours (as of July 2025) Number of bales produced: 235,597 units (as of July 2025) Main press force: 78.5 t Specific pressing force: 95 N/cm² Pre-press force: 28 t Press chamber volume: 2.7 m³ Feed hopper dimensions: 1,500 x 1,100 mm Theoretical throughput: 930 m³/hour Throughput under operating conditions: 410 m³/hour Bale dimensions: 750 x 1,100 mm Drive power: 55 kW Tying: 5-fold vertical, 3-fold horizontal, fully automatic Throughput at bulk density of: 30 kg/m³: approx. 9 to 12 t/hour, material-dependent 50 kg/m³: approx. 14 to 17 t/hour, material-dependent 100 kg/m³: approx. 16 to 25 t/hour, material-dependent Throughput for MSW (Municipal Solid Waste): approx. 20 to 27 t/hour, material-dependent Bale weights: 450 to 600 kg, depending on material and bale length Hydraulic oil tank volume: 1,000 L Baler dimensions (installed with hopper): 10,985 x 3,750 x 4,310 mm (L x W x H) Transport dimensions (baler only): 10,985 x 2,300 x 2,900 mm Machine weight (baler): approx. 24 t Condition of the baler: The machine has been partially overhauled and serviced in our workshop. After completion of the work, it was tested during live operation, both in manual and automatic mode. The following overhaul work was carried out: - Machine cleaned, partially derusted and partially repainted - Hydraulic oil tank fully drained and cleaned - Oil and air filters replaced, new hydraulic oil filled - Press ram disassembled and cleaned - All four running rollers on the press ram replaced - Wire station with guide rollers for the bottom wire cleaned and made operational - Side guides removed from press ram, smoothed, reinstalled and readjusted - Main hydraulic cylinder removed, dismantled and inspected - Piston rod replaced, cylinder tube honed - Complete seal kit replaced, pressure test performed - Hydraulic hose from main hydraulic cylinder replaced - Vertical and horizontal needle systems for tying disassembled, cleaned, wire guide rollers made operational and maintained - Chain cleaned, lubricated, chain tension readjusted - Drillomat cleaned, wire knives, twister shafts and twister fingers checked, torqued, and serviced - Door contact switches checked and partially replaced - Emergency stop button tested - Complete electrical wiring checked and partially renewed Redpfjy S Ru Asx Amusu - Bearings of wire guide rollers below the baler replaced - New safety grids for vertical and horizontal tying manufactured and installed - Machine inspected, general maintenance performed and baler tested in manual and automatic operation Scope of delivery: Only the baler is for sale. Remarks: All documentation (operating manual, CE declaration, electrical/hydraulic schematics) is complete and available. An inspection can be arranged by appointment. We assume no liability for technical specifications or possible errors.

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 1996, Fungsionalitas: berfungsi sepenuhnya, gaya penekanan: 170 t, lebar bukaan pengisian: 1.020 mm, panjang bukaan pengisian: 1.800 mm, lebar bal: 1.100 mm, tinggi bal: 1.100 mm, berat bal: 900 kg, berat keseluruhan: 40.000 kg, kapasitas tangki oli: 3.000 l, tahun perombakan terakhir: 2025, laju aliran volumetrik: 750 m³/jam, For sale is a used bale press system consisting of a chain belt conveyor designed for below-floor operation, equipped with a feed hopper, a hydraulic pre-compressor with agitating device, a MACPRESSE 111A baler, two complete wire feed frames each with five wire reel stands (without wire). Technical Data – Baler: Manufacturer: MACPRESSE EUROPA S.R.L. Model: 111A Year of manufacture: 1996, overhauled in 10/2024 Main press force: 170 t Specific pressure: 14 kg/cm² Feed chute dimensions: 1,800 x 1,020 mm Fill volume: 2.5 m³ Theoretical throughput: 750 m³/hour Bale dimensions: 1,100 x 1,100 mm, length variable Drive power: 2 x 55 kW Binding: 5-fold horizontal, fully automatic Throughput: approx. 30 to 35 t/hour, material dependent Hydraulic oil tank volume: 3,000 L Transport dimensions (baler with new machine feet): 11,700 x 2,300 x 2,900 mm (L x W x H) Machine weight: approx. 40 t Notes: The baler has been partially overhauled in our workshop and tested upon completion, see our functional video for reference. The system was previously used for baling paper and cardboard from municipal collections. After the contract period ended, the press line became available for sale. Details of overhaul work and replaced spare parts can be found in the detailed photo documentation and our offer. Redpfsy S Rqwex Amuju Complete documentation (operating manual, CE declaration, electrical/hydraulic wiring diagrams) is available. Inspection by appointment is possible. We assume no liability for technical details or possible errors. Technical Data – Conveyor: Manufacturer: Wagensfeld B.V. Model: Chain Belt Conveyor 1700 mm Year of manufacture: 2017 Drive power: 7.5 kW Belt speed: 14 m/min Feeder belt length: 6,900 mm Incline belt length: 12,885 mm Gooseneck length: 1,747 mm Total length: 21,271 mm Incline: 32° Usable width: 1,644 mm Height of drive axle above ground: 5,777 mm Side wall height feeder: 500 mm Side wall height incline: 880 mm Steel carrier height: 40 mm Carrier spacing: 1,200 mm Transport dimensions (dismantled): 15,005 x 2,503 x 2,435 mm (L x W x H) Pit dimensions: 11,500 x 2,700 x 1,015 mm (L x W x D) Notes: The chain belt conveyor (year 2017) was custom-built and installed to match the press during the last installation in the Netherlands. The conveyor is in good working condition and was not overhauled. A layout drawing with pit dimensions is available. Scope of delivery: 1 chain belt conveyor by Wagensveld B.V. 1 feed hopper with pre-compression flaps 1 agitating device 1 MACPRESSE baler, type 111A 2 wire feed frames with wire reel stands, without wire 1 operating manual with CE declaration, electrical and hydraulic diagrams

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 2009, jam operasional: 22.029 h, Fungsionalitas: berfungsi sepenuhnya, gaya penekanan: 80 t, lebar bukaan pengisian: 1.400 mm, panjang bukaan pengisian: 1.100 mm, lebar bal: 1.100 mm, tinggi bal: 750 mm, berat bal: 600 kg, berat keseluruhan: 16.000 kg, daya: 75 kW (101,97 hp), tahun perombakan terakhir: 2025, laju aliran volumetrik: 300 m³/jam, en_001 Rsdpfey R Nnfsx Amueu

Tahun pembuatan: 2022, Kondisi: baik (bekas), gleiswagen-platformwagen-schwerlast-transportwagen-transportwage n-schwerlastwagen-elektro-schwerlastschienenwagen-schienenwagen-t railer-hersteller-plan-gleiswagen-mit-antrieb-48-volt-und-batteri e-typ-egb-50-plattform-4640-x-2000-mm-traglast-50000-kg-antrieb-m it-elektrischem-getriebemotor-48-volt-spurbreite-mm-radlaufbreite -mm-abmessung-2000-4640-h770-mm-eigengewicht-4140-kg Rsdpfx Amjytt Nqsueu

Kondisi: sangat baik (bekas), 1 Rsdpfx Amjyuqrfjuju

Kondisi: baik (bekas), Saya menawarkan pompa vertikal industri merek ternama Jerman ALLWEILER GmbH – model NLT 50-200. Pompa ini dirancang untuk operasi berkesinambungan di instalasi industri, air, dan teknologi. Perlengkapan lengkap dengan motor listrik. Kondisi bekas – terdapat tanda-tanda penyimpanan dan korosi permukaan ringan. ⚙️ Data teknis Produsen: ALLWEILER (Jerman) Tipe: NLT 50-200 Tahun produksi: 2014 Kapasitas: 75 m³/h Tinggi tekan: 48 m Kecepatan putar: 2900 rpm Daya motor: 11,6 kW Tegangan: Rsdpfx Aeyxtfwsmusu 400V (50 Hz) 460V (60 Hz) Diameter konektor: sekitar 65 mm Desain: vertikal (pompa inline vertikal) ✅ Kondisi teknis pompa lengkap dengan motor tidak ada kerusakan mekanis yang terlihat berputar dengan lancar kondisi visual sesuai foto (tanda-tanda penyimpanan, karat ringan)

Kondisi: bekas, 🔥 For Sale: HDG Compact 15–50 kW Biomass Boiler – Flexible and Compact Wood Chip Heating System 🔥 The HDG Compact 15–50 kW is a versatile biomass boiler – ideal for residential properties, small businesses, or agricultural applications. It is suitable for operation with wood chips and pellets, offering modular output and fully automatic operation in a space-saving design. ⸻ Key Features: 🌲 Fuel: Wood chips or pellets ⚡ Output: 15–50 kW 🧠 Fully automatic ignition, feeding, and cleaning 🔧 Compact design – ideal for plant rooms with limited space 🇩🇪 HDG Bavaria – Precision biomass technology made in Germany 📍 Location: Hungary, 9200 Mosonmagyaróvár, Kötöttárugyári út 22 (ProfiKazán) ⸻ 💼 Top Heating Systems – ProfiKazán Compact biomass heating systems with maximum flexibility. TOP HEATING SYSTEMS – Used heating systems, boilers, heat pumps & accessories direct from stock We are a family business with around 20 years of experience in heating technology, operating a 1,500 m² warehouse in Mosonmagyaróvár, Hungary, with a constantly available stock of approx. 50–60 units. 📍 Location: Our warehouse is located in Mosonmagyaróvár, Hungary – about 15 km from the Austrian border and approx. 80 km from Vienna. Mosonmagyaróvár is the first major town on the Hungarian side after the Austrian border. 🔥 Our inventory includes, among others: • Wood chip boilers • Pellet boilers • Wood gasification boilers • Log wood boilers • Biomass boilers • Oil and gas boilers • Heat pumps • Thermal ventilators • Hot air blowers • Warm air heaters • Industrial heaters • Buffer tanks • Heat exchangers • Auger conveyors • Fuel extraction systems • Burners • Pumps • Comprehensive heating accessories ⚙️ Accessories and Components: We also offer a wide range of accessories, including circulation pumps, plate heat exchangers, and many other components – from domestic applications up to industrial scale. 🏭 Brands in our range: Fröling, Hargassner, KWB, HDG, Binder, ETA, Herz, Guntamatic, Windhager, Viessmann, Buderus, and many more. 🌐 Current Offers: Rjdpewahhvofx Amusu Much of our current range can be found on our website: topheatingsystems.com We also have additional units that have not yet been listed. 📅 Inspection: An inspection at our warehouse is possible by prior appointment. If you are interested, please feel free to contact us – we will help you find the right solution.

Kondisi: sangat baik (bekas), buderus-455kw-oel-notheizung-niedertemperaturkessel-auch-mit-bio gas-brenner-moeglich Redjx U Exujpfx Amusu

Kondisi: bekas, Tahun pembuatan: 2015, A recycling system for recovering and separating plastic and rubber products from textile reinforcements, such as various types of rubber hoses, PVC, tarpaulins, banners, and other synthetic materials reinforced with textile fibers. The system operates in conjunction with a granulation group and a separation system. Hourly throughput: 50–80 kg/h Feed opening dimensions: 270 x 120 mm + Ø 80 mm Blade configuration: 3x2 + 2x2 Rotor diameter: 250 mm Cutting length: 600 mm Motor power: 22 kW Dimensions (L x W): 3,200 x 3,000 mm Height: 2,500 mm Weight: 1,000 kg Year of manufacture: 2015 Technical condition: used machine, all motors operational. Redpfx Amswpkw Esuju Top hopper (400 x 300 mm) for loading product is missing. Complete original technical documentation is available.

Kondisi: siap digunakan (bekas), Mitsubishi A6GPPE programming controller, AC 220 V 50 Hz, used, 100% functional Rsdpfx Amei Eb Iceusu

Kondisi: siap digunakan (bekas), Fanuc A06B-2218-B000 Motor Servo AC SN: C301F26F4 dengan Pulsecoder A860-2050-T321 Rjdex Nlufspfx Amuju

Kondisi: siap digunakan (bekas), Siemens 1FT5064-0AF71-1-Z Motor SN: EE066569802002 dengan ROD 320.002 2000/U - Z = G42 (sistem encoder, 2000 pulsa/putaran, ROD 320), bekas, kondisi terawat baik, 100% berfungsi, pengiriman sesuai foto. Rjdpjy R It Hsfx Amuju

Kondisi: sangat baik (bekas), Tahun pembuatan: 2005, de-tr-20240614-1 Rjdpfxowgk A Ae Amuou

Kondisi: sangat baik (bekas), Tahun pembuatan: 2011, 1 Rsdpfx Amjign Iwsuou

Kondisi: siap digunakan (bekas), Siemens 1FT5066-0AF01-2 - Z Servomotor SN:E1Z80822403003, Z = lihat nameplate, sepenuhnya direkondisi dan diuji secara profesional dengan garansi 12 bulan, berfungsi 100%, isi pengiriman sesuai foto. Rabat penjualan yang telah disepakati tidak berlaku untuk produk ini. Silakan minta harga secara terpisah! Redpfx Amji D Sfceusu