Beli Pressta Eisele Profilma 500 E bekas (78.933)

Tahun pembuatan: 2004, Kondisi: bekas, de982b7c Fpjdpfx Aasxn Iq Deqog

Kondisi: sangat baik (bekas), Tahun pembuatan: 2007, Complete saw line consisting of infeed unit, fully automatic circular saw, and outfeed unit Suitable for a wide range of applications, particularly in the photovoltaic and automotive industries. Infeed unit: Horizontal loading magazine Model HLM 4-strand timing belt conveyor 6 compartments, each 285 mm wide, for holding profiles Max. material height corresponds to the saw cutting range, round stock max. diameter 130 mm 3 sliding strips between the belts for additional support Profile length: min. 2,700 mm, max. 6,500 mm Saw: Fully automatic circular saw Pressta-Eisele Model PROFILMA 510 E-SA Saw blade diameter max. 500 mm Continuously variable speed control Hydro-pneumatic saw blade feed, infinitely adjustable, from rear to front Siemens S7-300 control with touchscreen Reversal device with 5-fold stroke, up to max. 5,000 mm Electronic material feed 3–1,000 mm (single stroke) Cutting gap extension on both sides Fjdpfx Ajxvbvvsaqspg Pneumatic removal slide Waste flap after the saw for cut-offs / remnants Cut length depending on profile, from 8 mm Menzel minimum quantity lubrication Clamping pressure regulation 2 extraction nozzles for dust extraction Outfeed: Support table area 1,500 mm x 2,500 mm Pneumatic cross transfer slide

Kondisi: sangat baik (bekas), Tahun pembuatan: 2017, Fungsionalitas: berfungsi sepenuhnya, vollautomatische-bedienung-saegemaschine Fsdpfx Aeyvtyvjaqspg

Kondisi: baik (bekas), Tahun pembuatan: 1993, Mitre saw, saw unit right/left, double mitre saw, crosscut and mitre saw, double-end profiler -Manufacturer: Emmegi, Pressta Eisele, Double Mitre Saw Type SINGLE 2 HM500 -Cutting length: 250 to 5000 mm -Saw units: swiveling 45° -Saw blade: Ø 500 mm -Cutting data 90°: Cutting height 350 mm, cutting width 160 mm Fsdpfx Ajtxkprjaqopg -Cutting data 45°: Cutting height 260 mm, cutting width 125 mm -Dimensions: 5750/1220/H1700 mm -Weight: 1200 kg

Kondisi: baru, Untuk pemrosesan semua sistem profil jendela aluminium umum seperti Schüco, Hueck, Heroal, Reynolds, dll. Dapat digunakan secara universal dengan badan punch yang dapat disetel ganda. Untuk sudut siku dengan ukuran slot 25–60 mm dan offset ruang profil 0–40 mm. Pengatur tinggi sensor, pisau punch, dan sisipan penahan dapat diatur tanpa tingkat. Sensor dan badan punch dilengkapi skala. Penahan dapat ditarik masuk untuk memudahkan pemasangan profil, dan dapat menyesuaikan sendiri saat bergerak mendekati profil. Penguncian penahan secara hidraulis. Proses penekanan pneumatik melalui sistem tuas, menjamin proses punching yang sinkron. 2 silinder penekan pneumatik untuk menjepit profil. 2 cam eksentrik untuk posisi rangka. 2 lengan penyangga profil yang dapat diputar. Pengoperasian melalui 2 pedal kaki. Termasuk alat standar. Fodpfx Aashmfyhjqspg

Tahun pembuatan: 2004, Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Gergaji Ausklink untuk pemotongan sudut dan pemotongan miring. Mesin ini memiliki 2 diameter mata gergaji masing-masing 500 mm. Dilengkapi dengan alat penjepit pneumatik. Gerakan maju bersifat hidropneumatik dan dioperasikan dengan kendali dua tangan. Pemberhenti material dapat diputar dengan titik pengunci serta dilengkapi tampilan digital. Tinggi dan sudut potongan dapat disetel secara motorik dan dilengkapi tampilan digital. Maks. tinggi profil: 280 mm Maks. lebar potongan: 300 mm Fsdpfsyzcpdsx Aaqspg Maks. tinggi potongan: 185 mm Maks. kedalaman potongan: 185 mm

Kondisi: sangat baik (bekas), Tahun pembuatan: 2023, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 1587 / 1588, diameter mata gergaji: 500 mm, This model combines precise cutting to length with integrated punching operations, making it ideal for complex manufacturing processes: Saw Unit: Equipped with a saw blade diameter of 500 mm. The drive is provided by a 7.5 kW motor (400 V) with stepless speed control. Punching Unit: Features a hydraulic punching unit on the cut-off side with a punching force of 250 kN. Punching is performed vertically from above, with punch tool cassettes accommodating up to 8 profiles simultaneously. Material Feed: The material is fed via a ball screw spindle and a servomotor, with a maximum feed length of 400 mm per stroke. Control System: Modern versions are often equipped with a Siemens S7 control unit featuring a touch display for intuitive operation and precise programming. Fpedpfsyyz Txsx Aaqsg The machine is built for continuous industrial use and offers the following physical characteristics: Weight: approx. 1,000 kg to 1,500 kg (depending on equipment). Dimensions (Saw): approx. 2,100 x 2,000 x 1,600 mm (LxWxH). Hydraulic unit: approx. 900 x 600 x 800 mm. 2 machines in stock. ----- Attractive Offer – Flexible & Worry-Free We not only offer you a high-quality product, but also customized financing options tailored to your needs. Whether down payment, installment plan, or individual financing models – together we will find the right solution. Upon request, we will also handle the entire transport logistics for you. From planning to reliable delivery, we ensure a smooth and on-schedule process so you don’t have to worry about a thing. 📞 Feel free to contact us for further information or a non-binding offer. We will advise you personally and professionally. Subject to prior sale, modifications, and errors!

Kondisi: sangat baik (bekas), Tahun pembuatan: 2023, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 1589 / 1590, diameter mata gergaji: 500 mm, Fully automated sawing and punching machine for aluminum and plastic profiles The Profilma 502 ST-V combines precision sawing and punching in a continuous, automated workflow. Based on the proven Profilma 502 model, this machine is ideal for high production volumes, complex operations, and processing bundled materials. Control is managed via a Siemens S7 system with touch display, piece counter, cycle time indicator, and integrated fault diagnostics. An IXON router enables secure remote access via VPN. Up to 10 punching dimensions can be programmed per order. Sawing range & feed: - 500–550 mm saw blades - Saw drive: 7.5 kW, S6, 400 V, 50 Hz, 2,850 rpm - Infinitely variable speed control - Up-cut saw motion, motorized feed Fedjyyz Ebspfx Aaqjpg - Material feed: 3–800 mm, reversible up to 4,000 mm - Ball screw spindle with servo drive and round shaft guidance - Minimum offcut: from 75 mm (sawing mode), from 80 mm (punching/sawing mode)* Punching unit: - Vertical hydraulic punching unit (discharge side) with automatic oil cooling - Punching force: 300 kN - Stroke: 20 mm - Double stroke cycle time: 2–3 seconds - Punch scrap ejection into frame - Conveyor belt 250 × 800 mm for parts removal Equipment: - 2 pneumatic clamping cylinders (vertical, pressure-reduced) - 3 chip extraction ports Ø 100 mm, volt-free contact for extraction control - Minimum quantity lubrication unit with 2 × 3-liter tanks and fill level indicator - Soundproofing package: hood and saw blade guard insulated inside - Roller conveyor (740 mm) with reach-in guard on feed side - Sturdy stationary frame, working height: 960 mm - Manually opening safety cover - Saw blade housing below tabletop Max. cutting capacity: - Profile height: up to 65 mm - Profile width: up to 170 mm Technical data: - Dimensions (W × D × H): approx. 311 × 153 × 197 cm - 2 machines available ----- Attractive offer – flexible & worry-free We not only offer you a high-quality product, but also tailored financing options designed to suit your needs. Whether down payment, installments, or individual financing models—we will find the right solution together. On request, we also handle complete transport logistics. From planning to reliable delivery, we ensure a smooth and punctual process, so you do not need to worry about a thing. 📞 Please contact us for further information or a non-binding quote. Our advice is personal and professional. Subject to prior sale, modifications, and errors!

Kondisi: sangat baik (bekas), Tahun pembuatan: 2023, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 1591 / 1592, diameter mata gergaji: 500 mm, Fully automatic sawing and punching machine for aluminium and plastic profiles The Profilma 502 ST - HV combines precise sawing and flexible punching in a fully automatic pass-through process. Based on the Profilma 502 model, it is specially optimized for high-volume applications and combined operations—including the processing of entire profile bundles. Control is via a Siemens S7 system with touch display, piece counter, cycle time display, and integrated fault diagnostics. An IXON router allows secure remote access via VPN. Up to 10 punching positions can be programmed per job. The horizontal punching unit can be deactivated as required. Saw range & feed: - 500–550 mm saw blades - Saw drive: 7.5 kW, S6, 400 V, 50 Hz, 2,850 rpm - Continuously variable speed adjustment - Saw cut from below, motorized feed - Material feed: 3–800 mm, reversing up to 4,000 mm - Ball screw with servo drive and round shaft guide - Offcut: from 75 mm (sawing mode), from 80 mm (punching/sawing mode)* Punching unit: - Vertical and horizontal hydraulic punching unit (output side) with automatic oil cooler - Punching force: 2 × 150 kN - Stroke: ≤ 20 mm - Vertical stroke continuously adjustable (also suitable for embossing) - Horizontal punching cylinder can be switched off separately - Double stroke cycle time: 2x 2–3 seconds - Punching scrap is discharged laterally from the machine frame - Conveyor belt 250 × 800 mm for part discharge Equipment: - 2 pneumatic clamping cylinders (vertical, pressure-reduced) - 3 chip extraction ports Ø 100 mm, potential-free connection for extraction control - Minimum quantity lubrication system with two 3-liter tanks and fill-level display - Noise protection package: hood and internal blade guard sound-insulated - Roller conveyor (740 mm) with reach-in protection on feed side - Robust stationary frame, working height: 960 mm - Manually opening protective hood - Saw blade housing under the table Max. cutting range: Fodpfeyyzxhex Aaqepg - Profile height: up to 65 mm - Profile width: up to 135 mm Technical data: - Dimensions (W × D × H): approx. 311 × 153 × 197 cm - Total of 2 units available. ---- Attractive Offer – Flexible & Worry-Free We not only offer you a high-quality product, but also tailored financing solutions to suit your needs. Whether it's a down payment, installment plan, or custom financing models—together we'll find the right solution. On request, we can also take care of the entire transport organization. From planning to reliable delivery, we ensure smooth and timely handling so you don’t need to worry about a thing. 📞 Please contact us for further information or a non-binding quote. We will be happy to provide you with personal and competent advice. Subject to prior sale, changes, and errors!

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2013, 2013 metal circular saw. This PRESSTA EISELE Profilma 400 V features a Ø400 mm saw blade diameter and a powerful motor with approx. 12 kW output. It offers automatic material feed and a pneumatic clamping system for efficient operation. If you are looking for a high-quality saw, you should consider the PRESSTA EISELE Profilma 400 V we have for sale. Please contact us for further details on this machine. • Design: Integrated material feed/loading magazine; floating feed to compensate for profile deviations • Power supply: 400 V / 50 Hz • Materials: Aluminium and non-ferrous metal profiles • Saw blade diameter: Ø400 mm • Saw blade speed: adjustable approx. 3,500-5,800 rpm • Saw movement drive: Servo motor with ball screw drive • Saw feed direction: Linear feed from top to bottom • Cutting principle: Cross-cut • Material feed: Automatic servo feed with repeat strokes for longer cut lengths • Material separation: Before saw blade retraction (no post-cutting) Fedsyyxxfjpfx Aaqjpg • Clamping system: Pneumatic, vertical and horizontal, on both sides of the saw blade; clamping force individually adjustable; interchangeable plastic/PVC jaws • Control: PLC-based; operation via control panel with display • Features: Profile database; piece counter (incl. bundle cutting); cycle time display; diagnostic and error messages; machine status display • Saw blade lubrication: Minimal quantity lubrication (spray mist), programmable lubrication control • Extraction connections: Ø100 mm and Ø160 mm • Pre-installation: Prepared for external chip extraction • Motor power: up to 22 kW (multi-stage motor: 3.5 / 11.5 / 18.5 / 22 kW) Additional equipment • External chip extraction system (to connect to Ø100/Ø160 mm ports)

Kondisi: hampir baru (bekas), Tahun pembuatan: 2023, jam operasional: 1.809 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 1559, diameter mata gergaji: 550 mm, panjang pemakanan sumbu X: 800 mm, panjang total: 2.400 mm, lebar total: 2.000 mm, tinggi total: 1.800 mm, Rentang pemotongan baja bulat pada 90°: 190 mm, jenis arus masuk: tiga fasa, kecepatan rotasi (maks.): 2.850 rpm, ketinggian potong (maks.): 150 mm, berat keseluruhan: 1.650 kg, panjang bagian (min.): 3 mm, panjang bagian (maks.): 4.000 mm, kecepatan mata gergaji: 2.850 rpm, tegangan masuk: 400 V, penggerak gergaji: 7.500 W, diameter pemotongan: 270 mm, lubang pisau gergaji: 40 mm, Circular Saw Fully Automatic PROFILMA 502 + Chip Extraction MG 3 ST Circular Saw Fully Automatic PROFILMA 502 Fully automatic operation, 7.5 kW drive, S6, 400 V, 50 Hz, 2850 rpm. Fpedpfxsy Dtpmo Aaqog Suitable for saw blades Ø 550 mm, cutting range 270 x 150 mm (width x height), Ø 190 mm Maximum profile width 270 mm, Siemens S7 control with touch display incl. piece counter Includes CPU 315 and a Flexisoft, quantity multiplier for processing material bundles Cycle time indication in seconds, chain dimensions, includes reversing device for sections up to max. 4 m length Automatic shut-off via limit switch at the end of the material, error diagnosis, incl. IXON router for VPN connection, see data sheet Motorized saw blade feed, infinitely adjustable, vertical and horizontal clamping device from bottom to top, on both infeed and outfeed sides of the saw head, cutting gap expansion on both sides of the saw blade, electronic material feed unit, 800 mm feed length, with ball screw spindle and servomotor, including pneumatic horizontal and vertical clamping units. The profile support area in the feed section is equipped with a lift/lowerable roller, minimum remainder length from 75 mm (profile-dependent), horizontal and vertical clamping pressure reduction with 6 pressure regulators, cycle spray device with level monitoring and automatic shut-off, lubricant container 1 liter, noise protection package, frame lined with insulation mats on the inside 2 extraction nozzles Ø 100 mm, safety guard over the saw head and the feed unit, 740 mm roller conveyor with reach protection on the infeed side, 450 mm Pertinax table top with reach protection on the outfeed side Chip Extraction MG 3 Dust and chips are collected in a 172-liter metal container, which can be swung out for easy emptying 2 outlets with 100 mm hose adapter, without extraction hose, 3.0 kW drive, 400 V, 50 Hz, three-phase motor Max. air flow 2,600 m³/hr, negative pressure 30 mbar, with fan snail housing above the extractor Large filter area, pneumatic shaking unit for filter cleaning, filter class M, maximum noise level 80 db (A) Selector switch for continuous operation or operation controlled by the saw, without electric cable, paintwork: RAL 7035 / 9016

Tahun pembuatan: 2009, Kondisi: bekas, Sägeblattdurchmesser vertikal: 600 mm Sägeblattdurchmesser horizontal: 500 mm Fsdpjywtqdofx Aaqopg Ausklinkbreite: bei 90° Verarbeitung von Profilen bis zu 300 mm, Spitze Gehrungen bis 30° Profilhöhe max. 280 mm Ausklinktiefe: bei 90° horizontal bis 185 mm / bei 90° vertikal bis 230 mm Materialanschlag: schwenkbar 30° - 90° - 45° Materialanschlag schwenkbar mit Rastpunkten und Anzeige im Display Programmsteuerung zur automatischen Einstellung der Klinkhöhe, der Winkel sowie der Ausklinköhe Bis zu 6 Programme sind speicherbar Hydropneumatischer Materialvorschub über 2-Hand-Bedienung Pneumatische Materialspanner Kühlmittelschmierung

Kondisi: bekas, Tahun pembuatan: 2009, Hydraulische Arbeitsweise - Hu Fpedsyu Rw Iopfx Aaqsg

Tahun pembuatan: 1999, Kondisi: bekas, Saw blade diameter, vertical and horizontal: 500 mm Max. profile height: 280 mm Max. notch width: 300 mm Max. notch height: 185 mm Max. notch depth: 185 mm Swiveling material stop with locking points and digital display Fpjdpsvmz R Sefx Aaqeg Notch height motorized adjustable with digital readout Motorized adjustment of angles with digital display Hydropneumatic material feed via two-hand operation Pneumatic material clamps Coolant lubrication

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2018, diameter mata gergaji: 550.500 mm, The machine is in perfect technical condition and has seen very little use. Designed for machining aluminium and PVC profiles. Mitre cuts possible on 3 levels; can be used as a notching saw. Manual adjustment of the horizontal saw blade by up to 20 mm in front of the vertical saw blade. Cutting options: rectangular, single-sided mitre, double-sided mitre, triple-sided mitre. Profile processing up to 300 mm, width up to 90°; mitre cuts up to 30°. Horizontal notching depth up to 185 mm, vertical up to 210 mm at 90°. Cutting width at 90°: 300 mm; maximum profile height: 280 mm. Manual adjustment of cut and height, positioning via mechanical digital displays. Fpedpfjvtarnex Aaqjg Vertical saw blade swivel range: 30° – 90° – 30° (front/centre/rear), manual with digital display positioning. Material stop (table surface) can be manually swivelled left and right within the range 30° - 90° - 30°, with positioning via measuring scale. Material depth stop adjustable manually using the sliding carriage and manual clamp, positioning via digital display.

Tahun pembuatan: 1997, Kondisi: bekas, Saw blade diameter, vertical and horizontal: 500 mm Max. profile height: 280 mm Max. notch width: 300 mm Max. notch height: 185 mm Max. notch depth: 185 mm Swiveling material stop with locking points and digital display Notch height motorized adjustable with digital readout Motorized adjustment of angles with digital display Fjdox Ecg Uspfx Aaqspg Hydropneumatic material feed via two-hand operation Pneumatic material clamps Coolant lubrication

Kondisi: bekas, max-stanzkraft-100-kn Fpjdpfoxrmz Aex Aaqjg

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2008, Fungsionalitas: berfungsi sepenuhnya, High-performance automatic saw / Manufacturer: PRESSTA-EISELE Model: Profilma 510 / Year of manufacture: 09/2008 Description: * High-performance automatic saw with fully automatic operation * Very high cutting accuracy * Short cycle times * Burr-free sawing * High reliability * Low maintenance Suitable for aluminum and plastic, ideal for cutting large quantities of small parts. Length tolerance: 0.1 mm. The saw can be viewed and tested under power by appointment. Previous application: Used for cutting corner connectors. Very well-maintained, ready-to-use condition. Technical Data: - Saw motor: 7.5 kW, S6 - Speed: 2,000 - 3,500 rpm - Cutting speed: up to 92 m/s - Material feed length: up to 1,000 mm / 5-fold reversing possible - Cut-off length: from 8 mm depending on the profile - Remaining piece length: from 90 mm depending on cut-off length - Operating pressure: 6 - 8 bar - Power supply: Standard 400 V, 50 Hz - Weight: 1,750 kg - Dimensions (L/W/H): 2,700 x 1,400 x 2,300 mm Fsdpsw D T Uiefx Aaqspg Equipment: - Siemens S7 control panel - Fully automatic bar feed - Roller conveyors - Extraction unit - Chip bunker - Various accessories - CE marking No guarantee for completeness or correctness of technical specifications or equipment details. Subject to prior sale.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2001, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 1015, Profile dimensions (HxW) up to 100x195 mm, 80x200 mm Automatic working cycle Drive via a 3 kW/400 V motor, 2850 rpm Saw blade: d=450x3.8x40 mm, z=110 Horizontal and vertical material clamping on the infeed side Fpsdpowgmv Sefx Aaqog Dosing spray installation Horizontal material clamping in the feed device Retraction of both clamping jaws during return stroke (prevents profile scratching) Steplessly adjustable hydropneumatic feed for the saw blade Saw blade advances from the rear Length of cut sections adjustable within 0-300 mm (with reversing device 0-600 mm) Cutting length adjustment via handwheel with mechanical counter Maximum width of profile to be cut: 200 mm Cutting range (height x width): 100x195 mm, 80x200 mm Automatic shutdown when material is depleted Option to connect an extraction unit

Tahun pembuatan: 1996, Kondisi: baik (bekas), nomor mesin/kendaraan: 9182, 23168 Technical Data: - Notching options and mitres on 3 levels - Right-angled, single-sided, double-sided, and triple-sided bevel cuts - Usable as a crosscut saw for shifting cuts - Pneumatic profile clamping, processing with semi-automatic saw aggregates - Saw blade dimensions: - Vertical: 500 x 3.5 x 40 mm, positive - Horizontal: 500 x 3.5 x 40 mm, negative - Notching width / notching height at 90°: 300 / 285 mm - Vertical saw blade: 60° - 90° - 25°, motorised positioning with digital display - Saw blade pivot range horizontal with vertical saw blade: 45° - 90° - 45°, motorised positioning with digital displays Fodpfxjmb U E Aj Aaqspg - Notching height adjustment with digital displays - Manual profile stop shoulder, swivelling 30° - 90° - 45° - Pneumatic coolant spray device - Air connection: 6 bar - Drive: 400 V / 2 x 3 kW - Space requirements approx.: W 2400 x H 2000 x D 1400 mm - Weight approx.: 1200 kg

Kondisi: sangat baik (bekas), Tahun pembuatan: 2017, Tahun: 2017 - secara teknis efisien, siap digunakan – setelah servis penuh - kepala terpisah Fpedpfxoy Naz Ts Aaqsg - penggerak pneumatik - tinggi profil maksimum: 160 mm - unit resistansi diturunkan di bawah meja - kunci hidrolik untuk membalikkan unit resistansi

Kondisi: baik (bekas), Mesin penyambung sudut hidropneumatik untuk profil jendela aluminium hingga tinggi total 210 mm (tinggi penekanan maksimum 150 mm) Fpedpfx Aaoy Nm Dboqeg termasuk 2 set pisau stan standar, dapat diatur ketinggiannya silinder penahan pneumatik bantalan penahan yang bisa ditenggelamkan 2 lengan penopang profil yang dapat diputar pengoperasian melalui 2 pedal kaki

Tahun pembuatan: 2009, Kondisi: bekas, Aluminium cutting system with 2 saw motors, each capable of performing independent 45° cuts. Fpedpfx Asqzmnueaqeg Material feed unit accommodating up to 8,100 mm. Cross conveyor, discharge table, chip conveyor, and extraction unit included. Soundproof enclosure. Control via Siemens S7 panel. Operating manual and additional documentation available; further technical details on request. The machine was operational up to the point of dismantling. Further technical specifications available on request or see photos.

Kondisi: bekas, Tahun pembuatan: 2001, de-001 Fpjdpfx Aasyu Rzteqsg

Kondisi: bekas, Tahun pembuatan: 1998, hydropneumatische-arbeitsweise-01 Fedpfxsyrrddo Aaqopg