Beli Presto Gmbh & Co. Kg Hpk 50 B bekas (117.807)

Kondisi: baik (bekas), Tahun pembuatan: 2005, jam operasional: 15.606 h, Fungsionalitas: berfungsi sepenuhnya, gaya penekanan: 50 t, lebar bukaan pengisian: 1.050 mm, panjang bukaan pengisian: 1.250 mm, panjang bal: 1.200 mm, lebar bal: 1.100 mm, tinggi bal: 700 mm, berat bal: 500 kg, daya: 30 kW (40,79 hp), laju aliran volumetrik: 160 m³/jam, Good day, We hereby offer you, without obligation, a used baling press from the manufacturer Presto GmbH & Co. KG, model HPK 50 B. Iedjyplwfjpfx Afijia The following technical data has been taken from the manufacturer's operating manual and brochures, for which we cannot guarantee accuracy or completeness. Manufacturer: Presto GmbH & Co. KG Model: HPK 50 B Year of manufacture: 2005 Operating hours: 15,606 hours Main press force: 50 t Drive power: 30 kW Total connected load: 31.5 kW Rated current: 64 A Throughput under operating conditions with a bulk density of 60 kg/m³: approx. 6.7 t/hour Machine weight (press): 12.5 t Note: The machine has been serviced in our workshop (main control valve on hydraulic block replaced) and tested in continuous operation, both in manual and automatic mode. The machine documentation is available in German. An inspection of the press is possible in our workshop by appointment. We would be pleased if this machine is of interest to you. Your service team Mertens & Frowein GmbH

Kondisi: sangat baik (bekas), Tahun pembuatan: 2011, Fungsionalitas: berfungsi sepenuhnya, daya: 9,7 kW (13,19 hp), en-001 Iiodeu Tha Ijpfx Afiea

Kondisi: baik (bekas), Tahun pembuatan: 2010, jam operasional: 3.641 h, Fungsionalitas: berfungsi sepenuhnya, gaya penekanan: 36 t, lebar bukaan pengisian: 1.100 mm, panjang bukaan pengisian: 1.080 mm, lebar bal: 1.100 mm, tinggi bal: 750 mm, daya: 15 kW (20,39 hp), laju aliran volumetrik: 90 m³/jam, Technical Data – Baler: Manufacturer: Presto GmbH & Co. KG Model: CC 36 M Year of manufacture: 2010 Operating hours: 3,641 hours Main press force: 36 t Specific pressing force: 467 N/cm² Feed opening dimensions: 1,080 x 1,100 mm (L x W) Cycle time: 34 seconds Filling volume per cycle: 0.85 m³ Theoretical throughput: 90 m³/hour Throughput under operating conditions with a material bulk density of 35 kg/m³: approx. 51 m³/hour Iiedpfx Aju Thh Esfiea Bale dimensions: 1,100 x 750 mm (W x H), length variable Drive power: 15 kW Tying: 4-fold vertical, semi-automatic, with polyester twine Throughput rates at a bulk density of: – 35 kg/m³: 1.8 t/hour – 60 kg/m³: 2.5 t/hour – 100 kg/m³: 3.1 t/hour Transport dimensions (baler only): 4,200 x 1,640 x 2,200 mm (L x W x H) Machine weight (baler): approx. 4 t Notes: The baler has been function-tested in our workshop, subsequently stored, and is therefore available at short notice. Full machine documentation (operating manual, CE declaration, electrical and hydraulic schematics) is available. Viewing by appointment possible. No liability is accepted for the accuracy of the technical specifications or any possible errors.

Kondisi: baru, Tahun pembuatan: 2025, THE COST-EFFECTIVE BENDING MACHINE FOR TIGHT BEND RADII: The bending machine with a free-standing bending head can be easily converted for complex geometries to right and left bending. The plug-in bending tools allow for quick changeover to different tube sizes. Fast hydraulics shorten auxiliary times, which is a crucial factor for serial production. The clamping pressure for tube holding can be optimally adjusted. The PLC control system (expandable via USB stick) with data storage and latest X2X interface can store an almost unlimited number of programs for bending angles, length measurements, and rotation angles for up to 50 bending sequences per tube length. For monitoring springback values, a freely programmable database for up to 200 materials is available. The machine features two operating modes: In 'simple bending' mode, the length and rotation of the bends relative to each other are displayed automatically. In 'controlled bending' mode, the data is preset, and during bending, a continuous actual/target comparison is performed. Iedsndn Agopfx Afijia This eliminates mispositioning within a tolerance window, minimizing user-related error rates. General error messages are displayed in full text on the large screen. The mandrel retraction is programmable and can be automatically withdrawn early upon reaching the bending angle. The compact drive unit with detachable mandrel carrier offers advantages for on-site assembly as well as for special designs with very large tube feed, and is also available as a stationary version with an organizing system for tools and mandrel bars. An economical alternative to a fully controlled CNC machine. POSSIBLE APPLICATIONS: • Hydraulic piping • Pipeline construction • Plant engineering, e.g. for chemical industry • Metal construction • Prototype construction Technical data: • Bending capacity Ø 6 to 50 x 4 mm depending on material • Min/max bending radius: 10 mm/140 mm • Minimum bending radii: 1.5 x Ø (standard 2 x Ø) • Multi-function machine control, bending angle setting (0.1°) • Mandrel carrier lengths: 1500/3000/4500/6000 mm (special lengths available) • Maximum 180º bending angle • Weight: 600-700 kg (depending on configuration) • Ergonomic operation via safety foot switch OPTIONAL ACCESSORIES: • Automatic mandrel lubrication (minimum quantity) • Pneumatic or hydraulic quick-action chuck • Positioning of length and rotation via automatic braking function or manual stops using the foot switch • Semi-automatic positioning of length and rotation via servomotors • Pneumatic rotation stop • Tube calculation software • Laser-assisted tool monitoring for supervision of tool clamping • 10-inch touch screen with integrated tube calculation • Bending radius up to 250 mm • Data transfer via cable (LAN), wireless (WLAN), or USB OUR SERVICE: • Welcome for test production at our facility in the demo room • Consultation and information session at your location • Leasing/financing purchase consultation and handling via JUTEC • Trade-in of your current machine • Service contracts and on-site maintenance

Kondisi: baru, Tahun pembuatan: 2026, THE COST-EFFECTIVE TUBE BENDING MACHINE FOR TIGHT BEND RADII: This bending machine, equipped with a free-standing bending head, can be easily converted for right- or left-handed bending, making it ideal for handling complex geometries. The plug-in bending tools allow for quick changeovers to accommodate different tube diameters. A high-speed hydraulic system reduces non-productive times—an essential factor for series production. Clamping pressure for tube holding can be optimally adjusted. The PLC control system (expandable via USB stick) with data storage and the latest X2X interface can store an almost unlimited number of programs for bend angles, lengths, and rotation angles for up to 50 bends per tube length. A freely programmable database for up to 200 materials is available for monitoring springback values. The machine features two operating modes: In "Simple Bending," the length and rotation of the bends relative to each other are displayed automatically. In "Controlled Bending" mode, the bending data is preset, and a continuous target/actual comparison is performed during bending. This minimizes user-dependent error rates by eliminating mispositioning within a tolerance window. General error messages are displayed in full text on the large screen. The mandrel retraction is programmable and can be automatically retracted early upon achieving the desired bend angle. The compact drive unit with detachable mandrel support offers advantages on site, especially for custom constructions with very large tube feed lengths. It is also available in a stationary version with an integrated storage system for tools and mandrel rods. An economical alternative to fully automated CNC machines. POSSIBLE APPLICATIONS: • Hydraulic piping • Pipeline construction • System engineering, e.g. chemical industry • Metal construction • Prototyping Technical data: • Bending capacity Ø 6 to 50 x 4 mm, depending on material • Minimum/maximum bending radius: 10 mm/140 mm • Minimum bending radii: 1.5 x Ø (standard 2 x Ø) • Multi-function machine control with bend angle setting (0.1°) • Mandrel support lengths: 1500/3000/4500/6000 mm (special versions available in longer lengths) • Maximum bending angle: 180º • Weight: 800-900 kg (depending on version) • Ergonomic operation via safety foot switch OPTIONAL ACCESSORIES: • Automatic mandrel lubrication (minimal quantity) • Pneumatic or hydraulic quick-change chuck • Automated or manual (via foot switch) positioning of length and rotation with brake function • Automatic length and rotation positioning via servomotors • Pneumatic rotation stop • Tube calculation software • Laser-assisted tool monitoring for checking clamping force • 10" touchscreen with integrated tube calculation • Bending radius up to 250 mm • Data transmission via cable (LAN), wireless (WLAN), or USB OUR ON-SITE SERVICE: • Welcome to test production in our in-house demo room • Consulting and information session at your location • Consulting and transaction possible as leasing/financed purchase through JUTEC • Trade-in of your current machine Ijdong Exaopfx Afioia • Service contracts and on-site maintenance

Kondisi: bekas, Tahun pembuatan: 2008, Fungsionalitas: fungsi terbatas, nomor mesin/kendaraan: 6034, jarak pergerakan sumbu X: 7.200 mm, jarak lintasan sumbu Y: 450 mm, jarak gerak sumbu Z: 590 mm, gerak cepat sumbu X: 50 m/menit, pergeseran cepat sumbu Y: 25 m/menit, pergerakan cepat sumbu Z: 25 m/menit, daya nominal (semu): 45 kVA, produsen pengendali: HEIDENHAIN, model controller: Bahnsteuerung iTNC 530, tinggi total: 2.900 mm, panjang total: 12.500 mm, lebar total: 4.810 mm, berat keseluruhan: 14.000 kg, kecepatan spindel (min.): 100 rpm, kecepatan spindel (maks.): 12.000 rpm, tekanan kerja: 7 batang, The BZ 7000 is intended exclusively for milling, drilling, countersinking, reaming, and thread cutting of metals, aluminum, plastic, and wood (chipboard and solid wood). URBAN CNC Machining Center BZ 7000 - Year of manufacture: 04/2008 - Control system: HEIDENHAIN iTNC 530 path control - 4 axes - Travel X / Y / Z axis: 7200 / 450 / 590 mm - Working area X / Y / Z axis: 7000 / 400 / 350 mm - Weight: 14t Equipment - Sturdy base frame in welded construction - Linear ball guideways on all axes - Milling spindle unit: 100 - 12,000 rpm, tool holder SK 40 Drives: - X axis (50 m/min) via rack and pinion drive - Y and Z axes (25 m/min) via ball screw - B axis 9000°/min - Swiveling operator panel - Automatic centralized lubrication - Traveling tool changer for 12 SK 40 tool holders - Coolant emulsion system - Machine lamp - Safety fence - Electronic handwheel integrated into the control panel - Chip drawers - Laser scanner - Minimum quantity lubrication Technical Data - Compressed air connection: R 3/8" / 6 bar - Device connection: R 1/4" - Operating pressure: approx. 6 bar - Air consumption per cycle: approx. 600 l/min at 6 bar - Electrical connection: 3 x 400 V +/- 5% / 50 - 60 Hz - Control voltage: 24 V DC Iisdpfx Aoyzxfnefija - Rapid traverse: X-Y-Z 50 –25 -25 m/min - Infinitely variable feed: 0 - 5000 mm/min - Tool changer: disc magazine with 12 SK 40 tool positions - Tool holder: SK 40 - Tool clamping: hydraulic - Coolant system: emulsion, 300 l - Spindle speed: 100 - 12,000 rpm - Speed correction: 80 – 120 % - Drilling capacity in St60/Alu: up to 28mm Ø - Thread cutting capacity in St60/Alu: up to M24 - Measurement system: rotary encoder / length measurement system - Positioning accuracy: 0.025 mm - Repeatability: 0.015 mm - Control: HEIDENHAIN iTNC 530 M, 4 controlled axes - Data interface: V24/RS-232-C - Travel X / Y / Z axis: 7200 / 450 / 590 mm - Working area X / Y / Z axis: 7000 / 400 / 350 mm - Space requirement with safety fence: approx. 60 m² (12.5 x 4.8 m) - Machine weight with accessories: approx. 14 t - Sound emission: average sound pressure level 79 dB(A)

Kondisi: baru, Tahun pembuatan: 2025, Persiapan Media Peledakan 1x Lubang Pembersih 1x Elevator Ember 1x Separator Angin 1x Ayakan Getar Listrik 1x Bunker Media Peledakan 1x Mesin Peledak Tekanan 200l 1x Selang peledak, nosel peledak, saklar darurat (Deadman), kabel kontrol 1x Lemari Kontrol Aksesori opsional: Ijdow Ivvcepfx Afioia - Sekrup transportasi melintang sepanjang lebar ruang sandblasting (juga dapat digunakan sebagai silo cadangan tambahan untuk proses peledakan berjam-jam) - Ekspansi untuk 2 media peledakan: ferit dan mineral - Drum separator magnetik - Tahap demagnetisasi akhir - Laci magnet

Kondisi: baru, Tahun pembuatan: 2025, High Cube Basic Blasting Container with Sweeping Floor Shovel Hopper for approx. 4 pressure vessel fillings + additional blasting vessel capacity for extended blasting operations without refilling. Type: SC.20FHC.5800 Basic Standard equipment, ready for operation: (Simply fill abrasive media and connect power and compressed air) Ijdpfx Afew Ivk Tjijia - 1x Control cabinet with emergency stop, Siemens Logo controller - 1x Pressure blasting pot - 1x Pressure regulator and water separator - 1x Blasting hose DN 25 with 8mm blast nozzle - 1x Remote control with dead man’s switch - 1x Feed chute/Hopper for abrasive media - 1x Abrasive sieve + coarse particle catchment container - 1x Rising air separator for blast dust extraction (dust reduction during blasting) - 1x Filter unit with pre-chamber separator - 1x Extraction wall with louvered impact separator - 1x 4mm fabric-reinforced rubber wall lining - 1x Tread plate floor 3/5 - 1x LED lighting - 1x Emergency lighting, end-of-door switch, emergency stop - 1x Breathing air filter - 1x Blasting helmet - 1x Blasting gloves - 1x Suit Options: - Side Door Open: Container can be fully opened on the side for easy forklift loading - Container widening - Container extension - Crane roof hatch - Crane runway 500kg - C-profile rail for powder coating applications - Blasting trolley - Filter with Big Bag - HEPA post-filter for hazardous dusts (e.g., when blasting stainless steel) - Stainless steel tread plate floor for stainless steel blasting - Aluminum tread plate floor - And much more on request!

Kondisi: baru, Tahun pembuatan: 2025, Fungsionalitas: berfungsi sepenuhnya, tekanan: 6 batang, masa garansi: 60 bulan, lebar dalam: 5.000 mm, panjang dalam: 15.000 mm, tinggi dalam: 5.000 mm, luas filter: 352 m², laju aliran volumetrik: 22 m³/jam, Perlengkapan: dokumentasi / manual, pencahayaan, Blasting house *up to 5 years warranty* for all blasting media made from a steel structure/insulated panels with filtration system, recirculation system, abrasive recovery, 200l pressure blasting vessel with automatic refilling, blasting hose with dead-man control, breathing air system, LED lighting, wall cladding 70 Shore 4mm fabric-reinforced rubber, sweep pit with bucket elevator. Abrasive recovery via sweep pit with bucket elevator, upgradeable to crosswise screw conveyor with dosing hood across the full width as sweep pit or complete flat conveyor floor. Workpiece transport can be retrofitted: blast trolley with rail track, crane system, roof crane opening, etc. For glass bead blasting of stainless steel, upgradeable with an appropriate magnetic drawer or electrically driven magnetic drum separator. For blasting with two different abrasives (ferritic and mineral), upgradeable with magnetic drum separator, final demagnetization stage, and second air separator for abrasive separation and cleaning. Safety features: emergency lighting with battery, emergency stop switches inside the cabin and outside, inspection window to blasting chamber, door/gate limit switches, dead-man control, quick venting for pressure vessel. Iodpfx Aeu Hy Tpsfijia Warranty up to 5 years on various components. 50 years of experience and more than 3,000 installations in blast room plant engineering.

Kondisi: baru, Tahun pembuatan: 2026, Gerobak sand blasting 10t untuk instalasi sand blasting dengan penggerak pneumatik. - Penggerak pneumatik untuk beban 10t - Kapasitas muatan 10 t - Ukuran: P=2000mm L=2000mm T=500mm - Untuk sistem rel - Dengan permukaan penampang untuk dudukan benda kerja Iisdeyyxfrepfx Afioa - Meja putar sebagai opsi

Tahun pembuatan: 2015, Kondisi: baik (bekas), Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: A-150016, AUTOMATED ADHESIVE APPLICATION MACHINE, GANTRY SYSTEMS, AND AUTOMATED INSERTING UNIT FOR METAL SHEET REINFORCEMENTS This system is part of a larger production line; please refer to our other listings for more details. The offered equipment includes 3 staging areas for cover layers, an automated adhesive application machine for sandwich panel bonding, a conveyor belt for manual assembly of inlays/ribs, gantry systems for handling the cover layers, and an automated inserting unit for metal sheet inlays/reinforcement points. COMPONENT DIMENSIONS (from previous production): L/W min: 2000mm x 1500mm L/W max: 8000mm x 2500mm H min: 12mm H max: 60mm MATERIALS (from previous production): GRP, Sheet metal, Plywood, Timber/PU battens, PVC, Styrofoam Iedpfxoyt Nm Ss Afijia ADHESIVE GANTRY FOR CONTOUR & SURFACE BONDING (of cover layers & inlays): Number of area needle valves: 104 Number of contour needle valves: 1 Adhesive system: 1K-PUR Number of nozzles in water spray unit: 8 AUXILIARY UNITS: Climate-controlled cabin (for storage of 1K-PUR adhesive) Vacuum pump for gantry systems Punching unit

Kondisi: baru, Tahun pembuatan: 2026, Kabinet sandblasting tekanan untuk penyemprotan bagian dalam pipa dengan meja putar dan mode operasi manual - Sistem filter - Meja putar dengan prisma sebagai penyangga pipa - Lanse bagian dalam pipa digerakkan Ijdpfx Afoyn Inwjisia - Penyimpanan program, jarak tempuh, kecepatan pengumpanan, fungsi hembus - Nozzle sandblasting luar dengan osilasi (opsional)

Kondisi: baru, Tahun pembuatan: 2026, Blasting cabin, 4-axis controlled, for cleaning of casting molds, steel rings, dies in aluminum casting, tire molds, press tools, etc. Iiedpedrtanofx Afiea The travel path of the blasting nozzles is freely programmable. Equipped with 2 automatic nozzles and 1 manual blasting nozzle for post-cleaning parts. Hardox turntable and screw conveyor ensure long-lasting use of the blasting system. For questions regarding technical specifications, please contact us in writing or by phone. The machines are manufactured at our Grossenlueder site since 1971. Harth & Seifert – Georg Fischer – Schiffmann and Seidl – Oliver Fritz GmbH & Co. KG with their long-standing, well-known contacts.

Kondisi: baru, Tahun pembuatan: 2026, 1 Isdpfx Asynr E Tefieia

Kondisi: baru, Tahun pembuatan: 2026, 1 Ijdpfx Aeynr E Hjfioia

Kondisi: baru, Tahun pembuatan: 2026, druckstrahlkessel-100l-baustelle Isdpfx Aoynr Emsfijia

Kondisi: sangat baik (bekas), Tahun pembuatan: 2017, jam operasional: 150.050 h, Fungsionalitas: berfungsi sepenuhnya, produsen pengendali: Heidenhain, model controller: iTNC530, diameter meja putar: 500 mm, berat keseluruhan: 13.000 kg, kecepatan spindel (maks.): 14.000 rpm, jam operasional spindle: 6.950 h, pasokan pendingin: 20 batang, hidung spindel: HSK 63, jumlah slot dalam magazin alat: 60, Perlengkapan: kecepatan rotasi dapat diubah tanpa batas, konveyor serpihan, pemisah kabut oli, • Kondisi: Kondisi sangat baik • Jam Operasional: 6.950 • Meja Putar KESSLER, Ø 500 mm • Majalah Perkakas: 60 slot, HSK-A63 Iijdpex Hg Ibefx Afioa • Pendingin internal: 20 bar, dengan sistem filter sabuk • Sistem pendingin: Pengawasan level cairan pendingin otomatis • Udara melalui spindel • Pengukuran perkakas: Sistem pengukuran perkakas laser BLUM • Pengukuran benda kerja: Pengujian benda kerja inframerah (sistem probe 3D), termasuk persiapan pengukuran benda kerja • Pengawasan tabrakan: Modul POS DCM • Penyaluran media: Penyaluran media 3 kanal di tengah meja • Pengamatan: Jendela pandang putar • Handwheel Silakan kirimkan permintaan langsung melalui situs web kami jika Anda tertarik dengan mesin ini. Karena alasan teknis, permintaan penawaran langsung melalui portal eksternal sulit dan hanya dapat dilakukan dengan penundaan.

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 2014, jam operasional: 5.612 h, Fungsionalitas: berfungsi sepenuhnya, gaya penekanan: 48 t, lebar bukaan pengisian: 1.020 mm, panjang bukaan pengisian: 1.250 mm, lebar bal: 1.100 mm, tinggi bal: 750 mm, berat bal: 550 kg, tinggi total: 2.800 mm, berat keseluruhan: 12.000 kg, tinggi transportasi: 2.800 mm, kapasitas tangki oli: 300 l, daya: 30 kW (40,79 hp), laju aliran volumetrik: 332 m³/jam, Technical Data for the Baler: Manufacturer: HSM GmbH + Co. KG Model: VK 4812 Year of manufacture: 2014 Operating hours: 5,612 hours as of August 2025 Main press force: 48 t Specific pressing force: 58.2 N/cm² Feed hopper dimensions: 1,250 x 1,020 mm Theoretical cycle time: 11.2 seconds Theoretical throughput: 332 m³/hour Bale dimensions: 1,100 x 750 x 600 to 1,200 mm Drive power: 30 kW Total connected load: 32 kW Iodpovtpq Hsfx Afieia Rated current: 59 A Tying: 4-fold horizontal, fully automatic Throughput rates depending on bulk density: - At 20 kg/m³ up to 6 t/hour (material dependent) - At 50 kg/m³ up to 13 t/hour (material dependent) Bale weight: up to 550 kg (material dependent) PLC control: Siemens SIMATIC S7-200 Operator panel: Siemens HMI Touch Panel Hydraulic tank capacity: 300 L Oil type: HVI 46 Machine installation dimensions with bale chute: 10,046 x 4,387 x 2,705 mm (L x W x H) Transport dimensions of baler: 8,500 x 2,500 x 2,750 mm (L x W x H) Machine weight (baler): approx. 12 t Scope of Delivery: - HSM VK 4812 baler, without hydraulic oil, without conveyor technology - Two wire spool boxes for 8 units of 40 kg wire spools, without wire - Bale chute - Machine documentation in German Remarks: The baler is equipped with an oil cooler and volt-free contacts for external control. Operation at the control cabinet is on the left in pressing direction; the needle unit is located on the right side and can be folded backwards for transport. The baler has been partially overhauled and tested in our workshop, see photos and our function video. Documentation (operating manual, CE declaration, electrical/hydraulic circuit diagrams) is available in German. Inspection by appointment. We cannot accept liability for technical data or possible errors.

Kondisi: baru, Tahun pembuatan: 2025, Fungsionalitas: berfungsi sepenuhnya, laju aliran volumetrik: 16.000 m³/jam, daya: 15 kW (20,39 hp), Unit filter mobile 15kW kapasitas ekstraksi 16.000 m³/jam untuk debu agresif dengan pre-separator ruang depan. Pemasangan sekitar 10 menit. Pembersihan cartridge dengan dorongan udara bertekanan. 16 cartridge filter 15,6m² kelas Bio M. Pengumpulan debu menggunakan Big Bag. Filter terdiri dari 2 bagian terpisah yang dirakit dengan forklift. Penyambungan menggunakan 6 pengunci pengencang cepat dan 2 konektor. Pipa atau selang ekstraksi dapat dihubungkan ke bagian belakang filter. Isdpfxew Ivp Ns Afioia

Kondisi: baru, Tahun pembuatan: 2025, Fungsionalitas: berfungsi sepenuhnya, laju aliran volumetrik: 16.000 m³/jam, daya: 15 kW (20,39 hp), Unit filter mobile 15kW kapasitas ekstraksi 16.000 m³/jam untuk debu agresif dengan pre-separator ruang depan. Pemasangan sekitar 10 menit. Pembersihan cartridge dengan dorongan udara bertekanan. 16 cartridge filter 15,6m² kelas Bio M. Pengumpulan debu menggunakan Big Bag. Filter terdiri dari 2 bagian terpisah yang dirakit dengan forklift. Penyambungan menggunakan 6 pengunci pengencang cepat dan 2 konektor. Pipa atau selang ekstraksi dapat dihubungkan ke bagian belakang filter. Iijdpfow Ivpvjx Afioa

Kondisi: baru, Tahun pembuatan: 2025, Fungsionalitas: berfungsi sepenuhnya, tekanan: 6 batang, masa garansi: 60 bulan, lebar dalam: 4.000 mm, panjang dalam: 6.000 mm, tinggi dalam: 3.000 mm, luas filter: 99 m², laju aliran volumetrik: 7 m³/jam, Perlengkapan: dokumentasi / manual, pencahayaan, Blast house suitable for all blasting media, constructed from a steel frame/insulated panels, equipped with filtration system, recirculation system, blasting media recycling, 200L pressure blasting vessel with automatic refill, blast hose with dead man’s switch, breathing air system, LED lighting, 4mm thick 70 Shore fabric-reinforced rubber wall cladding, sweep pit with bucket elevator. Blasting media recovery via sweep pit with bucket elevator, upgradeable to a cross screw conveyor with metering hood spanning the full width as a sweep pit or a complete flat conveyor floor. Workpiece handling retrofittable: blasting carriage with rail track, crane system, roof crane opening, and more. For glass bead blasting of stainless steel: upgradeable with a proper magnetic drawer or electrically driven magnetic drum separator. When blasting with two different blasting media (ferrous and non-metallic): can be upgraded with magnetic drum separator, final demagnetizing stage, and a second air classifier for blasting media separation and cleaning. Safety equipment: battery emergency lighting, emergency stop switches inside the cabin and externally, viewing window to blast chamber, door/gate limit switches, dead man’s switch, rapid pressure vessel depressurization. Warranty up to 5 years on various components. Iiodpfx Aju A A Tksfisa 50 years of experience and over 3,000 systems built in the field of blasting technology.

Kondisi: baru, Tahun pembuatan: 2025, Blast room 12x5 m with blasting trolley and flat conveyor floor. Iijdjdhlikopfx Afioa Flat conveyor floor, screw trench, bucket elevator, magnetic separator, reconditioning unit, material bunker, abrasive replenishment system, free-jet pressure blower, filter unit with automatic cleaning. Walls lined with 4 mm fabric-reinforced rubber. For questions regarding technical specifications, please contact us in writing or by telephone. The machines are based on production at the Grossenlueder site since 1971. Harth & Seifert - Georg Fischer - Schiffmann und Seidl - Oliver Fritz GmbH & Co. KG with their longstanding, well-known contacts.

Kondisi: baru, Tahun pembuatan: 2025, Tumble belt blast machine with a 11 kW directly driven disc wheel turbine equipped with 8 throwing blades. Belt width: 1000 mm and diameter: 900 mm. Ijdpfx Afehvikujisia

Kondisi: baru, Tahun pembuatan: 2025, Fungsionalitas: berfungsi sepenuhnya, laju aliran volumetrik: 16.000 m³/jam, daya: 15 kW (20,39 hp), Unit filter mobile 15kW kapasitas ekstraksi 16.000 m³/jam untuk debu agresif dengan pre-separator ruang depan. Pemasangan sekitar 10 menit. Pembersihan cartridge dengan dorongan udara bertekanan. 16 cartridge filter 15,6m² kelas Bio M. Pengumpulan debu menggunakan Big Bag. Filter terdiri dari 2 bagian terpisah yang dirakit dengan forklift. Penyambungan menggunakan 6 pengunci pengencang cepat dan 2 konektor. Pipa atau selang ekstraksi dapat dihubungkan ke bagian belakang filter. Ijdowxlygopfx Afisia

Kondisi: baru, Tahun pembuatan: 2025, Injector gravity trough-belt blasting machine for blasting serial parts with glass beads, corundum, ceramic balls, etc. Thanks to the gravity system, the machine achieves 15-20% higher blasting performance compared to a standard injector blasting system. The unit features a bucket elevator with air separator for abrasive cleaning. Up to 20 programs can be stored for various blasting tasks. Iisdehunz Nspfx Afija