Beli Ryser Gmbh Bafag Atu 25 bekas (77.625)

Kondisi: sangat baik (bekas), Tahun pembuatan: 2016, Type BAFAG ATU 25 Power 2 kW Nedjuvg Dxopfx Abwjlc Material conveying unit by Labotek Power 1.1 kW

Kondisi: hampir baru (bekas), Tahun pembuatan: 2015, Fungsionalitas: berfungsi sepenuhnya, Pengering: Pabrikan: Ryser GmbH Swiss Tipe: BAFAG ATU 35 Daya: 3 kW Nledpfx Asu Rcz Debwec Tahun produksi: 2015 Perangkat pengangkut material: Pabrikan: Labotek Tipe: PGT 4-I/MV/MR/P1 Model: 101501 Tahun produksi: 2016 Daya: 0,4 kW

Tahun pembuatan: 2015, Kondisi: baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Manufacturer: Ryser GmbH Switzerland Nedpfx Aevz Svbebwslc Model: BAFAG ATU 15 Power: 2 kW

Kondisi: baru, *Technical Specification: -Air-cooled, 25.5 kW rated at +10°C supply temperature at an ambient temperature of +32°C -Temperature range supply: +5°C to +30°C (Optional lower temperatures down to -5°C possible) -Air volume: 8,000 m³/h -Max. air inlet temperature: +30°C -Optional heating capacity up to 24 kW *Pumps: -Delivery rate up to 150 l/min -Delivery pressure up to max. 4 or 7 bar -Motor output 1.1 or 2.2 kW *Dimensions: -L/W/H: 1,450 mm x 750 mm x 1,680 mm -Unladen weight: approx. 480 kg -Process medium connection: DN 32 internal thread *Details & Highlights: -Internal refrigerant: R 123 a -Power supply: 380-425V/ 50Hz -SBC-T control and regulation unit -Display for setpoint and actual value, alarm indicator -Fully hermetic reciprocating compressor Nlodpsg Ewwrjfx Abwsc -Refrigerant receiver with safety valve in accordance with DIN EN 378 -Power control -Frost protection monitoring -Flow monitoring -Grill cover over condenser -Oil sump heating -Drain facility -Level monitoring via float magnetic switch -Installed dirt trap in return line of process medium -Bypass valve between supply and return as pump protection, factory set -High and low pressure limiter according to DIN EN 378 -Stainless steel tank, capacity: 80 litres, open system, fully insulated -Self-supporting housing with castors, mobile -System for indoor installation -Control cabinet IP 54 Other performance classes available on request. Visit our homepage for more details. *This unit complies with European directives. Other directives and standards are only met if specified in the order confirmation. This technical specification reflects the standard configuration; customer-specific requirements deviating from the standard are shown in quotations or order confirmations.

Kondisi: bekas, Tahun pembuatan: 1992, Fungsionalitas: berfungsi sepenuhnya, daya: 2.500 kW (3.399,05 hp), tegangan masuk: 380 V, arus masuk: 53 A, frekuensi input: 50 Hz, jenis arus masuk: tiga fasa, gaya penekanan: 250 t, panjang meja: 4.050 mm, tahun perombakan terakhir: 2007, Perlengkapan: dokumentasi / manual, We offer this used Eisen u. Hammerwerk GmbH – EHT EHPS 25-40 press brake (downstroking press brake) for sale. Available immediately. Ready for operation. For sale due to new acquisition. Specifications: - 250 t pressing force - Cybelec DNC880S CNC control with Windows operating system (retrofitted in 2007) - Foot pedal control - Includes various upper tools in different lengths (segmented) - Lower die (reversible die) in different lengths (segmented) - Hydraulic tool clamping - Support table for bent parts Technical Data: - Machine type: EHPS 25-40 - Capacity: 2500 kN Nledpfjy D Sy Rex Abwoc - Year of manufacture: 1992 - Working length: 4050 mm - Serial number: 207380 - Power supply: 3~ - Frequency: 50 Hz - Operating voltage: 380 V - Control voltage: 24/220 V - Rated current: 53 A - Rated main fuse current: 80 A - Circuit diagram number: 209-178/372 If you have any questions or need further information, please feel free to send us a message or call us. Machine location at our premises: Pavic Fahrzeugtechnik Homberg GmbH Poschweg 2 34576 Homberg Relbehausen Germany This is a non-binding offer. Subject to prior sale, errors, and changes.

Tahun pembuatan: 2024, Kondisi: baru, oris- Extruder MINI ESE 20/25 D Technical Data Screw diameter [mm]: 20 Screw length [L/D]: 25 Screw speed [rpm]: 20–200 min⁻¹ Screw axial pressure [bar]: 300 (continuous operation), 350 (maximum) Drive: Three-phase motor with frequency converter Drive output [kW]: max. 2.5 Reduction gearbox with integrated thrust bearing Weight [kg]: approx. 160 Dimensions [L x W x H] [mm]: approx. 1050 x 600 x 1590* Electrical connection values: 3 / N / PE Supply voltage [V]: 400 at 50 Hz Control voltage [V]: 230 Temperature control: electric resistance heating bands with mica insulation Max. processing temperature [°C]: 300 Control cabinet and control panel The electrical installation of the extruder is housed in the machine base. The base contains all necessary switching, control, and display devices. The feed zone is water-cooled; water connection must be provided by the buyer, and a chiller unit for water cooling is not included in the offer. Extruder tooling is not included in the offer. Njdehx Elfopfx Abwslc

Kondisi: hampir baru (bekas), Tahun pembuatan: 2014, Fungsionalitas: berfungsi sepenuhnya, GHD Georg Hartmann Maschinenbau GmbH, SELECTRA 25, 2014, kondisi baik. Kapasitas: hingga 3000 produk/jam Dimensi produk: Panjang: 160 - 400 mm, Tinggi: 50 - 150 mm Daya listrik: 5 kW Udara: 6,0 bar Siap kirim Nsdpfx Absylurkjwelc

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2021, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 20-3443, tegangan masuk: 400 V, lebar total: 2.286 mm, panjang total: 11.994 mm, tinggi total: 2.582 mm, suhu: -80 °C, jenis arus masuk: tiga fasa, kapasitas pendinginan: 12 kW (16,32 hp), arus masuk: 63 A, suhu lingkungan (min.): -20 °C, frekuensi input: 50 Hz, suhu lingkungan (maks.): 42 °C, Ditawarkan sebuah unit penyimpanan suhu rendah mobile redundan dalam bentuk kontainer, terdiri dari ruang depan dengan suhu operasi -20 °C serta ruang penyimpanan dengan suhu yang dapat diatur hingga -80 °C. Data Teknis Suhu penyimpanan (dapat diatur): hingga -80 °C Suhu lingkungan yang diizinkan: -20 °C hingga +42 °C Jumlah sirkuit pendingin: 4 Tingkat tekanan suara (1 m di ruang terbuka): 73 dB(A) Sirkuit Pendingin – Tahap 1 Refrigeran: R449A (GWP: 1.397) Jumlah kompresor: 2 Jenis kompresor: Kompresor torak semi-hermetik, dikendalikan frekuensi Sirkuit Pendingin – Tahap 2 Refrigeran: R508B (GWP: 13.396) Jumlah kompresor: 2 Jenis kompresor: Kompresor torak semi-hermetik, dikendalikan frekuensi Kondensor Jumlah kondensor (tahap 1): 2 Kapasitas pembuangan panas per kondensor: 35,0 kW Jumlah kipas per kondensor: 2 Jenis kipas: Kipas EC, dikendalikan kecepatan Volume aliran udara nominal per kondensor: 8.800 m³/h Data Listrik Konsumsi daya pada titik operasi (total): 24,2 kW Kapasitas arus pada titik operasi (total): 43,9 A Rekomendasi proteksi: 2 × 63 A (konektor CEE, redundan) Catu daya: 400 V / 50 Hz / 3 Ph + N Sistem Kontrol PLC: Siemens S7-1214C Panel kontrol: Siemens TP900 Comfort, 9 inci, 16,7 juta warna Bahasa operasi: Jerman dan Inggris Nledpfszg Dtxjx Abwec Inspeksi Inspeksi unit dapat dilakukan kapan saja di pabrik kami setelah penjadwalan janji terlebih dahulu. Atas permintaan, unit dapat dioperasikan selama inspeksi sehingga Anda dapat memastikan fungsi dan performanya secara langsung.

Kondisi: bekas, Tahun pembuatan: 2008, jam operasional: 13.000 h, Fungsionalitas: berfungsi sepenuhnya, Pfeiffer Vacuum GmbH turbomolecular pump with drive electronics, Profibus DP Gateway, and accessories, PM P03 020 G, TPH 2101 P + TIC 250 Nodpfsncd S Usx Abwelc Turbopump model: PMP03020G, TPH2101P Gateway model: TIC250 Turbo-molecular pump: Serial number: 14219214 Year of manufacture: 2008 Inlet connection nominal diameter: DN 250 ISO-K Outlet connection nominal diameter: DN 40 ISO-KF Purge connection: G1/8" Nominal speed: 31,500 rpm (525Hz) Pumping speed for N2: 1,900 l/s Max. fore-vacuum pressure N2: 1.5 mbar Max. fore-vacuum pressure He: 1.0 mbar Max. fore-vacuum pressure H2: 0.5 mbar Oil: PM 016 144-T Condition notes: 1. Operating hours total approx. 13,000 h with approx. 1,600 start/stop cycles. 2. Process gases: nitrogen and argon 3. Process dusts: chromium nitride and 100Cr6 steel 4. The pump was fully operational when stored in 2018 and has been cleaned externally.

Kondisi: baru, Tahun pembuatan: 2026, jam operasional: 10 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: Parmel_042026PA, jenis arus masuk: tiga fasa, lebar total: 2.504 mm, panjang total: 5.768 mm, tegangan masuk: 400 V, panjang umpan sumbu Y: 2.500 mm, lebar kerja: 1.800 mm, tinggi total: 1.330 mm, akurasi pengulangan: 0,01 mm, lebar pemotongan (maks.): 1.600 mm, ketinggian potong (maks.): 50 mm, sambungan udara terkompresi: 4 batang, BUFFALO Cutter – Mesin Pemotong Kain & Tekstil BUFFALO Cutter kami adalah solusi ideal untuk pemotongan presisi tekstil, kulit, kain teknis, dan material komposit. Dengan teknologi CNC terkini, mesin ini menjamin: • Presisi potong tertinggi untuk pola, prototipe, dan produksi massal • Fleksibilitas untuk berbagai jenis material dan format Nlodpfx Aszf Ifvsbwoc • Efisiensi berkat waktu pengaturan yang singkat dan proses otomatis Baik di industri mode, furnitur, maupun otomotif – mesin pemotong kain & tekstil kami memberikan hasil sempurna dengan produktivitas maksimal. Model PC W16L25 • Pemotongan satu lapis hingga ketinggian 50 mm • Area kerja (L × P): 1600 mm × 2500 mm • 2 kepala pemotong, kepala pemotong ganda, alat pelubang jarum, dan dudukan pena plotter • Paket alat: ERT, EOT, VPT (pisau putar elektrik, pisau osilasi, modul punching) • KIS (Knife Initialization System) • Pompa vakum • Kompresor udara • Pengumpan rol pasif untuk kain non-elastis • Parmel Cutting Software • Garansi 12 bulan Kami menyediakan instalasi, pelatihan, suku cadang, bahan habis pakai, dan menjamin kelancaran operasional baik selama masa garansi maupun setelahnya.

Kondisi: baru, Tahun pembuatan: 2026, berat keseluruhan: 5.500 kg, jenis bahan bakar: diesel, kapasitas tangki: 1.000 l, warna: merah, daya: 400 kW (543,85 hp), arus keluaran: 720 A, tegangan keluaran: 400 V, frekuensi keluaran: 50 Hz, jenis arus keluaran: tiga fasa, daya nominal: 440 kW (598,23 hp), daya nominal (semu): 500 kVA, panjang total: 4.450 mm, lebar total: 1.600 mm, tinggi total: 2.550 mm, kecepatan rotasi (maks.): 1.500 rpm, produsen motor: Perkins, jenis pendinginan: air, Apakah Anda mencari solusi penyimpanan energi profesional untuk industri, bisnis, pertanian, instalasi PV, atau sistem cadangan listrik darurat? Dengan APS Battery Storage, Albari Power Systems GmbH menawarkan sistem penyimpanan energi berkualitas tinggi dan dapat diskalakan untuk aplikasi yang menuntut. Spesifikasi Teknis: * Kapasitas penyimpanan per unit: 233 / 254 / 440 kWh Nledpfxst Aa Ido Abwjc * Daya: 115 / 125 / 220 kWp * Teknologi Lithium-Iron-Phosphate (LFP) * Modul baterai berkualitas tinggi berbasis teknologi CATL * Sistem baterai berpendingin cairan * Sistem manajemen baterai terintegrasi (BMS) * Cocok untuk instalasi dalam dan luar ruangan * Dapat diperluas hingga sistem penyimpanan berkapasitas besar hingga 2 MWh per aplikasi Bidang Aplikasi: * Optimalisasi konsumsi sendiri * Pengurangan beban puncak (Peak Shaving) * Penghematan biaya listrik * Penyimpanan kelebihan energi PV * Catu daya darurat dan cadangan * Perusahaan industri dan komersial * Pertanian * Infrastruktur pengisian daya * Perusahaan utilitas dan penyedia energi Tersedia secara opsional: * Sistem Manajemen Energi APS (EMS) * Operasi off-grid / solusi microgrid * Integrasi instalasi PV * Integrasi genset diesel * Pemantauan jarak jauh dan manajemen energi * Solusi kontainer hingga beberapa MWh per unit Keunggulan Anda: ✓ Keamanan tinggi dengan teknologi sel LFP ✓ Umur panjang dan daya tahan siklus tinggi ✓ EMS dari Jerman dengan standar keamanan tinggi ✓ Desain sistem Jerman oleh Albari Power Systems ✓ Integrasi sistem Jerman oleh Albari Power Systems ✓ Perencanaan proyek dan commissioning yang disesuaikan ✓ Layanan dan dukungan Kami siap membuatkan konsep khusus sesuai aplikasi Anda. Albari Power Systems GmbH 21376 Salzhausen Harga berdasarkan konfigurasi proyek, silakan hubungi kami.

Kondisi: bekas, Tahun pembuatan: 1995, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 1235/1250P, lebar pemotongan (maks.): 1.250 mm, lebar kerja: 1.250 mm, arus masuk: 64 A, tinggi kertas (min.): 1 mm, tinggi kertas (maks.): 10 mm, panjang label: 250 mm, panjang kerja: 1.235 mm, kapasitas produksi: 300 unit/jam, KASZEROWNICA STOCK LM 1235/1250P | 1250 MM | PRODUKSI JERMAN Nljdpfozd Dwlsx Abwjc Dijual kaszerownica STOCK LM 1235/1250P yang diproduksi oleh perusahaan Jerman Stock Maschinenbau GmbH. Mesin ini dirancang untuk laminasi karton bergelombang dan karton padat dengan kertas dekoratif, label, serta lembaran cetak, memungkinkan produksi kemasan yang menarik, kotak promosi, dan materi display. Perangkat ini dilengkapi dengan sistem perekat otomatis, sistem pemposisian label, dan rol penekan yang memastikan kualitas penyatuan material yang tinggi. Konstruksi Jerman yang kokoh menjamin operasi yang stabil dan biaya operasional yang rendah. Keunggulan utama: • Lebar kerja 1250 mm • Dapat melaminasi lembaran XL hingga 1620 x 1210 mm • Pengaturan kecepatan kerja yang mulus • Pengaturan gerak meja tekanan yang presisi • Pengumpanan dan pengisian lem otomatis • Sensor level lem • Penyesuaian parameter kerja yang mudah dan cepat • Sistem pelumasan sentral • Kopling pneumatik • Penghitung siklus • Sistem keamanan: batang pengaman dan pemutus darurat Perlengkapan: • Feeder label semi-otomatis • Meja untuk pemberian lembaran plano secara manual • Pemberian karton bergelombang atau die-cut manual • Unit pengeleman dengan pengumpanan lem otomatis • Sensor deteksi dan registrasi label • Sistem pemposisian dan pengaplikasian karton • Rol penekan • Meja penerima untuk penumpukan elemen jadi • Rangka sentral untuk pemasangan dies Spesifikasi teknis: • Produsen: Stock Maschinenbau GmbH (Jerman) • Model: LM 1235/1250P • Tahun produksi: 1995 • Lebar kerja maksimum: 1250 mm • Ukuran lembaran yang bisa dilaminasi: hingga 1620 x 1210 mm (panjang praktis tidak terbatas) • Ketebalan material: 0,8 - 10 mm • Kapasitas: sekitar 300 siklus/jam • Daya listrik: 380 V / 50 Hz • Daya: 18 kW • Stopkontak: 64 A • Dimensi mesin: 6720 x 1910 x 1580 mm Mesin ini merupakan solusi ekonomis untuk perusahaan yang mencari mesin kaszerownica yang efisien dan terbukti untuk produksi kemasan premium. Konstruksi Jerman menjamin keawetan, operasi stabil, dan kemudahan penggunaan.

Kondisi: hampir baru (bekas), Tahun pembuatan: 2016, jam operasional: 1.275 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: W09FAL226GMF14035, tekanan kerja: 2.500 batang, panjang total: 3.750 mm, panjang selang tekanan tinggi: 2.000 mm, tinggi total: 2.040 mm, lebar total: 1.980 mm, berat kosong: 1.980 kg, bahan bakar: diesel, Perlengkapan: sasis, Falch Trailer Tandem Trail Jet 125, unit juga dapat dijual secara terpisah Nljdpfx Abezdy Imewjc PERHATIAN: Satu unit sedimentasi Falch tipe cont. sed 100.100 dapat dibeli secara terpisah, harga atas permintaan. Aksesori lengkap, lihat foto Mesin pembersih tekanan tinggi bekas Falch Trail Jet 125 dengan tekanan kerja 2500 bar. Perangkat dalam kondisi teknis sangat baik dan siap digunakan. Komponen berikut disertakan: - 3 selang tekanan tinggi Falch (1 terpisah, 2 pada rangka) - 1 kabel kontrol untuk sambungan pistol Falch - 2 kepala nozzle berputar 4-nozzle dari Falch - Pistol semprot Falch - Wheel Fan 2 tahun pembuatan 2020 - Pembersih lantai Scater 25 260 vc - Aksesori lain untuk mesin: set seal, filter, dll. Data teknis: Tahun pembuatan 2016 dan HANYA 1275 jam kerja Tekanan kerja dapat diatur pada perangkat.

Kondisi: baik (bekas), Tahun pembuatan: 1999, Approx. 23 OTTO Hazardous Goods Containers, 600L, IBC "Intermediate Bulk Container" – used –: Price per unit ex location: €395 (net)! Njdjwzyn Depfx Abwjlc Manufacturer: Otto Containersysteme GmbH Type: 11A/X/01/99/D/OTTO/BAM 0356/2556/1090 Serial number: 33782 Year of manufacture: 1999 Capacity: 600L Tank material: St. W 24 (steel) Maximum gross weight: 1,090 kg Tare weight: 190 kg Approved as Intermediate Bulk Container (IBC) for national (GGVS/GGVE/GGVS) and international (ADR/RID/IMDG Code) transport of dangerous goods, packaging groups I, II & III (X-certification) * Dimensions according to DIN 30741 * Container made of steel, hot-dip galvanized * With hinged, lockable lid * Lid can be secured in any open position up to approx. 70° via special spring mechanism * Container features only 2 closures at the front * With forklift pockets, securing hooks for PE bags, nameplate and pocket Condition: good Available: immediately Location: D-06766 Bitterfeld-Wolfen

Kondisi: baru, Tahun pembuatan: 2026, Fungsionalitas: berfungsi sepenuhnya, Perlengkapan: Penandaan CE, Model dasar Panel Bender – Pusat Penekuk Nedpsy H Huhsfx Abwjlc Untuk informasi lebih lanjut dan penawaran khusus, silakan kirimkan permintaan Anda kepada kami. Kami akan segera memproses permintaan tersebut dan menghubungi Anda.

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, langsamlaufer-mit-getriebe Njdpfxjyf I Tbs Abwjlc

Kondisi: belum diuji (bekas), Mesin kombinasi pemotong dan pelipat, panjang pelipatan 6000 mm Nlodey Rfpfopfx Abwoc

Kondisi: bekas,

Kondisi: sangat baik (bekas), Tahun pembuatan: 2020, Fungsionalitas: berfungsi sepenuhnya, Manufacturer: Speidel Tank- und Behälterbau Year of manufacture: 2020 Technical data: Net capacity: approx. 1,250 liters Material: Stainless steel 1.4404 / AISI 316L Design: insulated (with thermal jacket / insulation jacket) Internal surface: suitable for food and pharmaceutical applications Operating pressure: atmospheric (storage tank) Temperature range: suitable for temperature-controlled media Connections: hygienic clamp fittings Manway: available Bottom: conical (complete drainage) Feet: height-adjustable Application: The tank is ideally suited for storing pharmaceutical, cosmetic, or food-processing liquids. It was used in a pharmaceutical facility as a CIP tank and operated under hygienic conditions. Typical applications include: - Intermediate storage of bulk products - CIP feed tank - Storage of alcohol, cleaning, or disinfecting solutions - Process integration in filling lines Construction: - High-quality stainless steel design (316L) - Insulated vessel for temperature-controlled processes - Hygienic design with clamp connections - Conical bottom for complete residue drainage - Industrial-grade construction by German manufacturer Speidel Condition: - Very good condition - Used, well maintained - Immediately available FAT / Documentation: - Operating manual available - Manufacturer’s documentation available Scope of delivery / Documentation: - Complete stainless steel tank Nsdpfxjy I Skwj Abwelc - Insulation jacket - Documentation / operating manual - Nameplate available Special features: - German brand quality (Speidel) - Suitable for pharmaceutical, cosmetic, and food applications - Ideal as CIP feed tank or buffer tank - Compact design with high quality

Kondisi: baru, Eurotec Innovation TV25-M – Mobile Vibratory Finishing System / Trough Vibrator (Made in Germany) The TV25-M from Eurotec Innovation is a compact, mobile all-in-one solution for professional vibratory finishing – ideal for deburring, grinding, and polishing a wide range of workpieces. Thanks to its well-designed system configuration, all necessary components are space-efficiently integrated on a mobile cart. This makes the unit highly versatile and immediately ready for operation. Type: TV25-M TROUGH VIBRATOR Manufacturer: Eurotec Innovation GmbH Gross Volume: 50 liters Njdpjhmp Dqefx Abwjlc Advantages: ✔ Mobile turnkey system – all components integrated on one mobile cart ✔ Plug & Play – simply connect to 230V and start ✔ Integrated process water treatment (cascade system) ✔ Sieve box for automatic separation of workpieces and media ✔ Sound-insulated design for quiet operation ✔ Programmable control unit with timer and frequency adjustment The U-shaped trough design allows for processing larger and elongated workpieces while maintaining a compact footprint. ⚙️ Technical Data: Gross volume: approx. 50 liters Usable volume: approx. 36 liters Internal dimensions of processing container: Length: 600 mm Width: approx. 275 mm Height: 325 mm Power supply: 230V Output: approx. 0.5–1.0 kW 🏭 Fields of Application: Deburring of metal and plastic parts Polishing and surface finishing Processing of single parts up to small batches Ideal for industry, workshops, and contract manufacturers Ideal application areas: Metalworking Deburring & Polishing Workshops & Production The TV25-M is the perfect solution for businesses seeking a flexible, space-saving, and immediately-ready vibratory finishing system – offering maximum efficiency with minimal space requirements. Additional versions and special configurations available upon request. From development to production, we supply all products from a single source – all "Made in Germany". ----- Simply contact us – we’re happy to advise you without obligation. ----- The European Commission provides an online dispute resolution (ODR) platform for out-of-court settlements. This offer serves solely as an online presentation of our products. Contract negotiations are conducted via telecommunications (email, fax, phone, messaging portal), during which we first provide you with a non-binding quotation, also informing you of our general terms and conditions and your right of withdrawal (including legal disclosure) before any purchase or contract is concluded.

Kondisi: baru, Tahun pembuatan: 2026, Fungsionalitas: berfungsi sepenuhnya, Dressing Machine for Grinding Wheels: Simple Manual Operation, Robust and Precise Nedpfxsha Eh He Abwjlc Technical Specifications: Diamond Grinding Spindle: HSK-50 or as per customer request (e.g. SK-40, Perfect Arbor, etc.) Maximum Dressing Wheel Diameter: ø300mm Maximum Dressing Wheel Width: 20mm Maximum Grinding Wheel Diameter: up to ø250mm Grinding Wheel Speed: 0–1500 rpm (steplessly adjustable) Traverse Range Left/Right: 135mm Traverse Range Forward/Backward: 135mm Dressing Wheel Diameter (Silicon Carbide): ø180x10xΨ32mm Approximately 98° travel on both sides Dressing Wheel Speed: 0–2800 rpm (steplessly adjustable) Oscillation Frequency of Dressing Wheel: 0–50 rpm (steplessly adjustable) Dressing Wheel Oscillation Length: 0–50mm (adjustable) X and Y Axis Optical Scale System: 0.001mm Capabilities: Radius dressing, dressing of wheel packs Connection: 380V, 50Hz, Total Power Consumption: approx. 1.5kW DXF import included Camera system with live feed on a 23" monitor included Latest software generation GWDress-Studio with automatic AI measurement included

Kondisi: baru, Tahun pembuatan: 2026, Fungsionalitas: berfungsi sepenuhnya, The GWDress-250 smartline is the intelligent solution for precise dressing of grinding wheels up to a diameter of 250 mm. Thanks to selectable manual or automatic control modes, dressing processes can be organized flexibly and with high efficiency. Performance Data: - Rotary axis and feed axis, CNC controlled - Diamond grinding spindle: HSK-50 or customer specification (e.g., SK-40, Perfect Arbor, etc.) - Max. dressing wheel diameter: ø300 mm - Max. dressing wheel width: 20 mm - Max. grinding wheel diameter: up to ø250 mm - Grinding wheel speed: 0–1500 RPM (infinitely variable) - Travel range left/right: 135 mm - Travel range forward/backward: 135 mm - Dressing wheel diameter (silicon carbide): ø180x10xΨ32 mm - Approximately 98 degrees traversable on both sides Nedpfx Asw E E S Ajbwjlc - Dressing wheel speed: 0–2800 RPM (infinitely variable) - Dressing wheel oscillation frequency: 0–50 oscillations/min (infinitely variable) - Dressing wheel oscillation length: 0–50 mm (adjustable) - X, Y axis optical scale resolution: 0.001 mm - Capabilities: Dressing of radius and wheel sets - Connection: 380V, 50Hz, total power: approx. 1.5 kW - DXF import included - Camera system with live transmission on a 23" monitor included - Latest software generation GWDress-Studio with automatic AI measurement included - Country of origin: Austria

Kondisi: baru, Tahun pembuatan: 2026, Fungsionalitas: berfungsi sepenuhnya, Dressing Machine for Grinding Wheels: Easy to Operate, Robust, and Precise Our enclosed grinding wheel dressing machine provides you with an unbeatable combination of user-friendly operation and exceptional stability. The solid granite base ensures maximum precision and durability, while the intuitive controls maximize efficiency in your workshop. While your tool grinding machine continues to operate, our dressing machine saves you both time and money. Nlsdpfx Absubbrtswoc Ideal for anyone who values reliable performance and outstanding value for money!

Tahun pembuatan: 2023, Kondisi: hampir baru (bekas), Fungsionalitas: berfungsi sepenuhnya, extruder-ex20-25d-de Nledpfx Abjq R Tkwewec

Tahun pembuatan: 2026, Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, ex20-25d-description Njdpfx Abeiv H Ekswjlc