Beli Sistem Keilzing Otomatis bekas (19.898)

Kondisi: bekas, Tahun pembuatan: 2016, The PDFD line consists of two primary components: the DFC 60 tenoning and profiling machine (where the ends of the slats are machined) and the PHSL longitudinal finger-jointing press, which joins elements into slats up to 6.6 meters in length with the option to program up to eight intermediate cuts, dividing the slat into sections of operator-defined length. Between these main machines, there are transport units that also perform initial tenoning. The presented line configuration allows for a productivity rate of approximately 8,500 to 10,500 linear meters per shift. The machine has undergone a complete overhaul and comes with a one-year warranty. A microprocessor-based control system enables flexible adjustment of work parameters to suit user requirements. The machine can process both ‘calzing’-type elements and components for the production of edge-glued panels (‘line-jointed’). The implementation of a receiving table with automatic feeding of slats onto the PHSL press infeed conveyor allows for operation of the line by a single operator handling material input. The receiving table is equipped with a buffer shield, which increases efficiency and smooth workflow. The line operates in an automatic cycle with manual material feeding. The line’s components can be assembled in various configurations (to be agreed with the buyer), allowing the machine to be adapted to user’s facility layout. Technical Specifications: - Maximum input package width (tenoning and profiling machine): 650 mm - Width of glued elements: 30 – 155 mm - Length of glued elements: 170 – 900 mm - Thickness of glued elements: 20 – 70 mm - Operating air pressure: 0.6 MPa - Compressed air requirement: approx. 25 m³/h - Operating efficiency: up to 4 cycles/min (6,600 mm slat) - Length of glued element: 4,500 – 6,600 mm - Operating voltage: 3/N/PE 400 V 50 Hz - Control voltage: 24 V DC - Power requirement: max 100 kW Hodpfx Aec U Txkja Isp Operating process: Wooden slats are placed by the operator onto the cart of the first tenoning and profiling machine. Feeding the pieces initiates the machining cycle. The first machine evens up the ends of the package and then cuts the finger-joint pattern. The package then moves to the table of the second machine, where the opposite side is machined and glue is applied. Elements from the DFC-60 D tenoner are transported via a chain conveyor to the preliminary tenoning unit, where a set of rollers and a pressure device apply initial pressure to the finger-joint profile on the scantlings prior to entering the press. The pre-tenoned scantlings are conveyed onto the press table; once the target length is achieved, they are cut. Then, using a pusher bar and clamping strip, they are transferred into the press bed area for pressing. The glued and pressed, finished slat is pushed onto the press's outfeed table. While the scantlings are moved to the press bed, the process of feeding elements onto the press table is carried out simultaneously, maintaining continuous press operation for higher gluing productivity.

Kondisi: bekas, Tahun pembuatan: 2009, Fungsionalitas: berfungsi sepenuhnya, tegangan masuk: 230 V, sambungan pneumatik: 10 batang, de Hsdpfoy Ah Ubjx Aa Iep

Kondisi: sangat baik (bekas), Lini produksi wafel Acemal. Terdiri dari pembagi adonan, proofer, oven plat panas, dan spiral pendingin. Dibeli baru tahun 2015 dan jarang digunakan. Kapasitas mulai dari 2.000 wafel Liège per jam. Hedpfxjxnqtzo Aa Iop

Kondisi: siap digunakan (bekas), Fungsionalitas: berfungsi sepenuhnya, Ein gut erhaltenes gebrauchtes automatisches Etikettiersystem mit Doppelriemenantrieb und regelbarer Geschwindigkeit – das System wurde zur automatischen Etikettierung der Unterseite von Kartons/Schachteln in einer Produktionslinie eingesetzt. Ein integrierter Barcode-Scanner erkennt das Vorhandensein des mit Barcode versehenen Etiketts; wird kein Etikett erkannt, löst das System einen Alarm aus und stoppt – die Barcode-Erkennung kann bei Bedarf deaktiviert werden. Anschluss: Einphasenwechselstrom, 240 Volt Hsdpewufb Aefx Aa Iop Weltweiter Versand möglich.

Tahun pembuatan: 2004, Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Sistem penyimpanan kaca kompak semi-otomatis Hedpfozdylxex Aa Ijp 25 posisi Ukuran kaca maksimum: 3210 x 6000 mm Kapasitas beban laci: 6000 kg Total kapasitas beban: 150000 kg (150T) Dalam kondisi sangat baik dan bersih Kondisi kerja baik, telah diuji Dijual apa adanya Lihat video

Kondisi: bekas, Sistem pemberian papan otomatis telah digunakan pada Mesin IM Hart Deck. Kabin listrik juga termasuk. Hedpezd Hwbofx Aa Iop

Tahun pembuatan: 2007, Kondisi: sangat baik (bekas), nomor mesin/kendaraan: 20051619, Main functions: Slitting, cross-cutting, creasing Paper feed size: 210 (W) x 210 (L) mm to 370 (W) x 520 (L) mm Minimum finished size: 55 (W) x 45 (L) mm Paper weight: 120 to 400 g/m² *Depending on paper quality Operation: 4" touchscreen Job memory: 263 preset jobs & 150 custom job memories Hjdpfx Aaohii Swj Iep (100 MANU SET + 50 FLEX MODE) Feeding mechanism: Top belt tri-suction feeder (patented) Side blower Angle adjustment Side alignment Double-feed detection Cut mark registration Feeder tray stacking capacity: 100 mm Speed: - 8.8 sheets/min: SRA3 21-up business card - 11 sheets/min: SRA3 8-up postcard - 12.2 sheets/min: SRA3 4-up greeting card - 15.4 sheets/min: A4 2 cuts & 1 crease

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, jam operasional: 100 h, Sistem Shuttle otomatis OSR Shuttle™ Evo dari KNAPP, dirancang untuk penyimpanan, picking, dan manajemen aliran logistik berkinerja tinggi. Sistem modular ini memungkinkan pengoperasian gudang modern yang fleksibel, dapat diskalakan, dan hemat energi. Spesifikasi teknis utama: Tipe: Sistem AS/RS (Automated Storage and Retrieval System) Kapasitas: hingga 50 kg per tote Tinggi pemasangan: hingga 30 m Throughput: hingga 1.000 siklus ganda/jam Operasi: 1D atau 2D sesuai konfigurasi Komponen yang disertakan (tergantung konfigurasi): - Shuttle OSR Shuttle™ Hodpfx Aaextawts Iep - Rak penyimpanan densitas tinggi - Elevator vertikal kecepatan tinggi - Stasiun picking - Aksesori koneksi (konveyor, suplai listrik, kabel, dll.) Lingkungan: dapat digunakan di area berpendingin (hingga –28 °C) Aplikasi: e-commerce, distribusi, industri, farmasi, elektronik, dll. Kompatibel dengan stasiun "goods-to-person" dan sistem konveyor otomatis Jumlah: 20 Harga: €5.400,00 (belum termasuk PPN) per shuttle

Tahun pembuatan: 2008, Kondisi: bekas, Labeling Machine/Marking System SRD Stano-/Alone-Line Features: * Used labeling machine with marking system * Very robust design * Condition: fully functional with signs of use * Ideal for rapid material handling * Professionally dismantled and packaged Year of manufacture: 2008 Technical Data: Manufacturer: SRD Model: Stano/- Alone-Line Device: Valentin SPE 106/12 Internal item number: 2026012704 Semi-automatic marking system for image and audio media Hjdpoyfgp Uofx Aa Ijp See operating manual, wiring diagram, and pneumatic diagram Tailor-made solutions for your intralogistics. If you need roller conveyors, belt conveyors, inclined conveyors, or telescopic units for loading and unloading your goods, we are your competent partner! We are happy to provide you with a customized quote or consult you regarding layout or installation questions. Simply let us know your requirements and the local circumstances. Take advantage of our many years of experience and our excellent network of specialists. We have already successfully completed projects for companies in various industries, such as logistics, the pharmaceutical industry, trades, or the electronics sector. Together, we will develop solutions to optimize your processes and material flow cost-effectively and sustainably. We can also offer you fully automated sorting technology or supplementary components, such as picking racks or containers.

Kondisi: sangat baik (bekas), en Hedey Ucnaspfx Aa Isp

Kondisi: sangat baik (bekas), Tahun pembuatan: 2021, We offer the ETL Prüftechnik ATS 400 X8 automatic test system, designed for electrical and safety testing of products in both industrial and laboratory environments. The device is commonly used for: • Quality control (QC) • End-of-line production testing • Laboratories and OEM test stations — Basic specifications • Model: ATS 400 X8 • Power supply: 230 V / 50–60 Hz / max. 10 A • Year of manufacture: 03/2021 • Manufacturer: ETL Prüftechnik GmbH (Germany) • Condition: very good, well-maintained equipment • Last ETL factory calibration: 05/2023 • Weight: 38kg — Equipment / included in the set • Main ATS 400 X8 unit with built-in touchscreen • Windows 10 Pro operating system (OEM) • Full set of test cables and accessories (as shown in the photos) • Manufacturer’s documentation • Original markings, nameplates, CE marking Hedjyc H N Nepfx Aa Iop — Technical notes • This is a professional test and measurement instrument, not consumer electronics • The equipment is ready for use in a production environment • No signs of tampering, all connectors and interfaces are complete

Tahun pembuatan: 2015, Kondisi: seperti baru (mesin pameran), nomor mesin/kendaraan: 2015020890, For sale is a magnetic filtration system with an automatic cleaning mechanism. Filtration systems of this type are typically manufactured only upon individual customer request. This particular unit was used for demonstration purposes only and has seen minimal actual operation. Product advantages - Can be integrated into existing production lines Hodpfx Aascwghbo Iop - Separation of all ferrous metal contaminants - Highly corrosion-resistant - Highly wear-resistant - Compact design - Low maintenance Technical details - Dimensions: 400 x 400 x 390 mm - Inlet: 260 x 260 mm - Outlet: 260 x 260 mm - 8 magnetic filter rods

Kondisi: hampir baru (bekas), Tahun pembuatan: 2019, Automatic A-frame Dispensing System, Order Picker The KNAPP SDA system is a state-of-the-art automatic picking solution designed for high-throughput products. It is ideally suited for environments such as drugstores, cosmetics, FMCG, and pharmaceutical logistics, where fast and error-free order processing is crucial. Products are stored in gravity-fed channels. When an order is received, the system automatically dispenses the required quantity, depositing it onto a conveyor belt or into a collection container. Number of sections: 24 (including 1 tube dispenser) 24 channels per section Total: 552 channels + 15 tube dispenser channels (for 60 products per channel) The system can be expanded to double its capacity. Main advantages: - Automatic product dispensing - Fast picking - Precise inventory management - Continuous operation - High throughput - Minimal risk of errors Ideal application areas: - Pharmaceutical logistics - Pharmaceutical wholesale - Cosmetics warehouses - FMCG distribution centers - E-commerce fulfillment Technological background The system: - Utilizes intelligent channel management - Operates with PLC control - Is supported by WMS/KiSoft integration - Provides real-time inventory monitoring Operator functions The SDA user interface enables: - Channel status monitoring - Test sorting - Error diagnostics - Fast maintenance interventions Why KNAPP SDA? The SDA system is one of the most advanced solutions for fast and efficient order picking, supporting continuous, scalable logistics processes. Hjdjzbt Suopfx Aa Iop

Tahun pembuatan: 2006, Kondisi: seperti baru (mesin pameran), nomor mesin/kendaraan: 31331, DISTILLATEUR DNP 2000 SYSTÈME DE DISTILLATION À LA VAPEUR SEMI-AUTOMATIQUE – PROTÉINE-AZOTE Raypa DNP-2000 Année de fabrication : 2006, jamais utilisé Distillateur protéine-azote basé sur la méthode de Kjeldahl. Automatique, destiné à l'analyse de l'azote protéique dans les échantillons de matières premières ou de produits transformés dans l'industrie agroalimentaire. Méthodes spécifiques disponibles. Résultats conformes aux réglementations : EN/ISO, AOAC. DISTILLATEUR D’AZOTE – DNP-2000 Caractéristiques • Vingt programmes utilisateurs libres. • De plus, le système dispose de trois programmes fixes : – Test au sulfate d’ammonium ; – Préchauffage du système ; – Lavage des déchets d’échantillon. Avantages • Kit optionnel pour titrage automatique. • Aspiration des échantillons. • 20 programmes utilisateurs. • Étalonnage de la pompe par l’utilisateur final. • Générateur de vapeur avec contrôle du niveau d’eau. • Pompe à acide borique. • Capteur d’ouverture de porte. Performances • Plage de mesure : de 0,1 à 200 mg d’azote. • Récupération d’azote : >99,5 %. • Reproductibilité : ±1 %. • Temps de distillation : 4 min/100 ml. • Consommation d’eau de refroidissement : 1,2 l/min. • Puissance : 2000 W (100 %). Paramètres programmables et valeurs • Eau pour la dilution : 0 à 240 ml. • Solution de soude (NaOH) : 0 à 240 ml. • Solution d’acide borique (H3BO3) : 0 à 240 ml. • Temps de réaction (délai) : 0 à 30 min. • Temps de distillation : 0 à 30 min ou illimité. Hedpfxjfiliws Aa Ijp • Régulation de la puissance vapeur : 30 à 100 %. Sécurité • Détection de porte fermée. • Détection du tube de digestion. • Thermostat de surchauffe. • Utilisations dans l’industrie agroalimentaire mais aussi en œnologie pour la vinification. • Documents : manuel d’instructions + joints de montage et prise. • Pour les sociétés roumaines, possibilité de vente à tempérament. Prix : 3 600 € HT Départ usine chargé (FCA : Oradea/Roumanie) Sous réserve d’erreurs, de modifications et de vente préalable / We speak English./ Wir sprechen Deutsch./ Beszélünk magyarul./ Nous parlons français/Vorbim romana

Tahun pembuatan: 1995, Kondisi: baik (bekas), The bender is capable of bending aluminium and plastic. Total length: approx. 11,500 mm Hsdpfxjrif U Eo Aa Iep Depth: 1,600 mm.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2001, Fungsionalitas: berfungsi sepenuhnya, panjang total: 4.000 mm, lebar total: 1.500 mm, tinggi total: 3.600 mm, tinggi kerja: 2.500 mm, tegangan masuk: 400 V, berat keseluruhan: 2.700 kg, jenis arus masuk: AC (pendingin udara), Fully automatic Lisec desiccant filling machine A2RL-25/25RN, year of manufacture 2001 Technical data: Minimum spacer width: 6 mm Maximum spacer width: 24 mm Maximum spacer size: 2500 x 2500 mm Minimum spacer size: 400 x 400 mm Power supply: 3x400VAC/50Hz Control voltage: 24VDC Hsdjrtm Sajpfx Aa Iep The machine is in very good condition and can be inspected at our warehouse by appointment. A frame trolley for fully automatic frame feeding is included with the machine (an additional one is available as an option upon request).

Kondisi: baru, Tahun pembuatan: 2026, jam operasional: 1 h, Fungsionalitas: berfungsi sepenuhnya, panjang total: 3.400 mm, lebar total: 600 mm, tinggi total: 1.400 mm, masa garansi: 18 bulan, berat keseluruhan: 500 kg, tegangan masuk: 400 V, daya: 3 kW (4,08 hp), sambungan udara terkompresi: 8 batang, tekanan udara: 7 batang, Perlengkapan: dokumentasi / manual, de-to-en-sas200 Hedpsp S Nv Isfx Aa Iop

Tahun pembuatan: 2019, Kondisi: hampir baru (bekas), Fungsionalitas: berfungsi sepenuhnya, Dijual mesin las otomatis empat kepala SCHTEC WM740, jarang digunakan dan kondisinya hampir seperti baru, lengkap dengan pembersih sudut otomatis WM620, stasiun pendingin, dan lengan pemutar otomatis. Jika dibeli satu paket dengan pusat pemesinan SMC350 dan obeng otomatis dua kepala Pressta yang tercantum di iklan kami, harga paket adalah 180.000 EUR. Untuk informasi lebih lanjut, silakan hubungi kami. Hjdsyzimcopfx Aa Ijp

Kondisi: baik (bekas), Tahun pembuatan: 2018, Fungsionalitas: berfungsi sepenuhnya, lebar total: 3.642 mm, panjang total: 3.334 mm, tegangan masuk: 400 V, panjang pemakanan sumbu X: 2.900 mm, panjang umpan sumbu Y: 2.600 mm, lebar kerja: 2.600 mm, kecepatan pemakanan sumbu X: 80 m/menit, laju pemakanan gandar Y: 80 m/menit, lebar pemotongan (maks.): 2.540 mm, ketinggian potong (maks.): 20 mm, sambungan udara terkompresi: 9 batang, We are selling our Atom FlashCut Fashion 26B all-in-one fully automatic cutting table system. With a usable working area of 2,900 x 2,600 mm, a cutting window of 2,540 x 850 mm, and a separate unloading section of 1,200 x 2,600 mm, the FlashCut 26B provides optimal conditions for efficient workflows. The maximum cutting height of 20 mm allows processing of a wide range of materials – including multi-layer applications. Hedjymn R Nepfx Aa Iop Two independently operating tool heads ensure high speed and maximum productivity. Servo drives on the X, Y, and Z axes guarantee precise movements at a traverse speed of up to 80 m/min and acceleration of 1G. Intelligent Material Handling & Vacuum Technology A continuous conveyor belt feeds the material into the processing zone. The vacuum table is divided into 300 x 300 mm segments, allowing targeted activation of individual sections. This ensures precise material fixation while minimizing energy consumption. Two high-performance vacuum pumps with frequency control (3–15 kW) automatically adjust their power to the actual demand. The result: secure material fixation with energy-efficient operation. Precision via Camera and Projection Technology For optimal material utilization, the system is equipped with two cameras featuring integrated light sources and dimmers for detecting irregular material outlines – for example, when working with leather hides. Defect areas can be digitally marked and considered in downstream processing. Two high-performance projectors support automatic nesting by projecting cut contours directly onto the material. In addition, article numbers, sizes, or further identifiers can be projected onto the cut parts – ideal for process reliability and traceability. Powerful CNC Control & Software The system is equipped with a modern CNC controller, including a TFT color display, keyboard, and USB interface. An integrated computer with Windows Embedded, Ethernet connectivity, and TeamViewer support enables easy operation and remote maintenance. The software package includes: • DXF converter for reading and transforming CAD files • Interactive layout software • Automatic nesting software • CAD module for creating simple geometries Optionally, the Luxury Nest strategy extends the system with a specially developed nesting logic for optimizing leather cutting. This allows for consideration of quality zones, defect areas, and specified rotation and grouping rules to achieve maximum material yield. Versatile Tooling Options The FlashCut 26B comes equipped with a multi-tool head. Standard tools include: • Drag knife • Punch tools (various diameters) • Marking tool • Tracing needle • Laser pointer • Knife holder and ejector This makes the system flexible for cutting, marking, and perforating tasks. Safety & Reliability A safety system with light barriers and emergency stop switches ensures maximum operational safety. The machine is CE-compliant and designed for industrial continuous operation.

Kondisi: hampir baru (bekas), Tahun pembuatan: 2022, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: SN 1171, berat benda kerja (maks.): 450 kg, tinggi kerja: 870 mm, laju pemakanan gandar Y: 45 m/menit, lebar kerja: 300 mm, masa garansi: 12 bulan, panjang total: 1.900 mm, jenis penyesuaian ketinggian: mekanis, berat keseluruhan: 450 kg, tinggi total: 1.500 mm, lebar total: 1.300 mm, sambungan udara terkompresi: 6 batang, Perlengkapan: dokumentasi / manual, en-GB Hodpfx Aoxhquxoa Isp

Kondisi: baru, ⭐⭐⭐⭐⭐ (5.0) ⚡️ Top service ⚡️ Fast delivery ⚡️ Excellent support! ✈️ Plus shipping costs – shipping available upon request.✈️ Fast delivery: Only 4-6 weeks after receipt of payment! Important note: If you would like to receive a quotation for an automatic powder coating system, please use the powder coating system configurator on the homepage of our website. ✅✅✅Energy Efficiency Class A+++✅✅✅ ➖➖➖➖➖ ✳️Maintain your liquidity! We offer a wide range of financing models to ensure your investment has the greatest chance of success. Contact us today to learn more about our hire-purchase, warranty, or leasing programmes. ➖➖➖➖➖ ✨✨Buy directly from the manufacturer and enjoy price and quality advantages!✨✨ Benefit from Proton’s 40 years of experience in surface coating technologies. ➖➖➖➖➖ ☘️Environmentally friendly☘️⚡️Green energy⚡️☘️ ► Optimal adhesion starts with perfect preparation – Chemical pre-treatment systems from PROTON◄ Before the coating can reach its full potential, the surface must be flawless. PROTON’s surface pre-treatment plants ensure that every contamination – whether oil, dirt or oxide – is reliably removed. This is the only way to achieve long-term corrosion resistance and excellent paint adhesion. Every product requires an individually tailored process. Whether alkaline or acidic degreasing, iron or zinc phosphating, nanotechnology, or chrome-free technologies – we develop customised solutions for your requirements. Our pre-treatment systems – whether spray or immersion type – offer you: Hjdskwct Uepfx Aa Isp ✳️ Maximum energy efficiency ✳️ Reduced chemical and water consumption ✳️ Precise process control with automatic dosing and pH monitoring ✳️ Robust construction from chemical-resistant stainless steel or plastic Our promise: Tailor-made technology for the most demanding requirements Our experienced project team will analyse your production conditions in detail and recommend the optimal pre-treatment system, tailored to your needs. We take all essential parameters into account – from heating capacity and water circulation to steam separation and chemical partitioning. Our spray washing lines are seamlessly integrated into your conveying equipment. All cleaning, rinsing, and drying processes are fully automatic and efficient – ready for a perfect coating application. Available systems: ✳️ Spray and immersion pre-treatment lines ✳️ Nanotechnology systems (e.g. Bonderite, Oxsilan) ✳️ Degreasing and pickling plants ✳️ Iron and zinc phosphating lines ✳️ Chromating and chrome-free systems PROTON – Technology that convinces. Experience that matters. ⭐Follow us for new offers⭐ ☀️ 2 YEARS WARRANTY ☀️ ☀️We provide CE certificates for all our machines and ATEX certificates where required.☀️

Kondisi: bekas, RITTAL / E SYS-K System GmbH turning station Automatic turning device for packaging made from aluminum profile system Swivel station with roller conveyor, BOSCH REXROTH aluminum profile system Weight of the turning unit: 730 kg As-new condition Hodpfjv Tdkbjx Aa Isp

Kondisi: baru, Tahun pembuatan: 2026, The new Mini Logy pallet changer system is well-suited for most products, especially where automatic pallet exchange is required—from wooden pallets to plastic pallets, or vice versa. The system can be configured exactly according to your requirements and capacity. Our systems are adaptable and can be integrated with AGV solutions (Automated Guided Vehicles). Hjdpfxjhx D Alj Aa Isp

Kondisi: bekas, Tahun pembuatan: 1998, nomor mesin/kendaraan: 1941, Vollautomatische Hochleistungsstanze – Fully Automatic High-Performance Punching System Kugler 340-2R Year of manufacture: 1998 – Serial No. 1941-340-2R Working width: max. 340 mm Minimum sheet size: 120 x 105 mm Maximum sheet size: 340 x 340 mm Maximum punching thickness: 3 mm Mechanical cycles per minute: 80–100 cycles Automatic paper feeding for continuous operation Paper delivery unit with jogger Including manuals Online video inspection via Skype available We would be pleased to arrange your visit – further machines in stock Hsdpfx Aasiypk Ss Iep Available immediately – Machine can be inspected Location: Emskirchen / Nuremberg – Testing possible

Kondisi: bekas, Tahun pembuatan: 2009, Vollautomatische Hochleistungsstanze – Fully Automatic Punching System KUGLER-WOMAKO ProPunch 50-110 (R) Baujahr / Year 2009 – Serial-No. MK00579 Arbeitsbreite / Working width max. 500 mm Format / Sizes min. 120 x 105 mm Format / Sizes max. 500 x 500 mm Stanzstärke / Punching thickness max. 3 mm Mechanische Taktleistung pro Minute / Mechanical cycles per minute: 110 cycles/min Anlegesystem für kontinuierliches Arbeiten / Paper feeding for continuous production Kastenauslage mit Rüttler / Delivery tray with jogger Inkl. Handbücher / Includes manuals Hjdpfxeiypk Is Aa Iep Leistungsaufnahme / Power requirement: 4 kVA / 3 kW Nennstrom / Rated current: 10 A 2 Werkzeuge / 2 tools: 3:1 – 550 mm length Online video inspection via Skype video We would be very pleased to welcome your visit – more machines in stock Available immediately – Can be inspected In stock in Emskirchen / Nuremberg – Can be tested