Beli Sumitomo Demag El-Exis S 300/720-1450 bekas (78.774)

Tahun pembuatan: 2009, Kondisi: siap digunakan (bekas), Clamping force: 3,000 kN, holding force: 3,300 kN, max. opening stroke: 670 mm, min. mould installation height: 330 mm, max. mould installation height: 710 mm, max. distance between platen faces: 1,380 mm, platen dimensions: 1,040 x 950 mm, clear tie bar distance: 720 x 650 mm, max. mould weight: 4.7 t, max. weight on moving platen: 2.4 t, max. weight on fixed platen: 3.6 t, ejector stroke: 200 mm, ejector force: 69 kN, ejector retraction force: 31 kN, screw diameter: 50 mm, L/D ratio: 20, injection pressure at 400°C: 2,426 bar, shot volume: 530 cm³, part weight (PS): 480 g, max. dosing stroke: 270 mm, max. nozzle stroke: 470 mm, nozzle immersion depth (SVO): 20 mm, nozzle contact force: 110 kN, installed barrel heating: 14.8 kW, material hopper volume: 110 l, oil tank capacity: 700 l, electric screw drive: 38 kW, electric clamping unit drive: 37 kW, pump unit power: 22 kW, installed total power: 112 kW, continuous sound pressure level: 78 dB(A), length: 6,500 mm, width: 2,000 mm, height: 2,300 mm, weight: 15.7 t, PLC operating hours: 28,890 h, barrel heating: 35,656 h, pump: 27,922 h, documentation available. On-site inspection possible. Nlodpfxjy Tx Rns Abwjc

Tahun pembuatan: 2005, Kondisi: siap digunakan (bekas), en-GB Nledpfxox D Rqrs Abwec

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2019, jam operasional: 25.500 h, gaya penjepit: 10.000 kN, diameter sekrup: 110 mm, volume langkah: 3.136 cm³, Sumitomo SHI Demag EL-Exis SP 1000-6300 Nlsdpfxeygk Eis Abwjc

Tahun pembuatan: 2009, Kondisi: siap digunakan (bekas), Clamping force: 2000 kN, holding force: 2200 kN, max. opening stroke: 570 mm, min. mould installation height: 310 mm, max. mould installation height: 660 mm, max. distance between platens: 1230 mm, platen dimensions: 830 x 830 mm, clear tie bar spacing: 560 x 560 mm, max. mould weight: 3.3 t, max. permissible weight on moving platen: 1.7 t, max. permissible weight on fixed platen: 2.5 t, ejector stroke: 180 mm, ejector force: 69 kN, ejector retraction force: 31 kN, screw diameter: 45 mm, L/D ratio: 20, injection pressure at 400°C: 2402 bar, shot volume: 358 cm³, shot weight (PS): 330 g, max. dosing stroke: 225 mm, max. nozzle stroke: 400 mm, nozzle immersion depth (SVO): 20 mm, nozzle contact force: 80 kN, installed cylinder heating: 13 kW, material hopper volume: 70 l, oil tank capacity: 500 l, screw drive: 32 kW, clamping unit drive: 32 kW, hydraulic pump capacity: 15 kW, total installed power: 92 kW, continuous sound pressure level: 74 dB(A), length: 5700 mm, width: 1700 mm, height: 2200 mm, weight: 11 t, operating hours (PLC): 36,734 h, cylinder heating: 25,665 h, pump: 18,222 h, documentation available. An on-site inspection is possible. An optional Wittmann robot cell is also available. Nledpfx Ajy Tx Rbebwjc

Kondisi: bekas, Tahun pembuatan: 2007, jam operasional: 67.000 h, gaya penjepit: 250 kN, volume langkah: 530 cm³, tekanan injeksi: 2.426 batang, berat keseluruhan: 14.200 kg, diameter konveyor sekrup: 50 mm, Basis pengiriman: FCA Pegnitz Waktu pengiriman: sesuai kesepakatan Nlodpewlkcaefx Abwjc Syarat pembayaran: 100% pembayaran sebelum pengambilan mesin, bersih tanpa potongan

Kondisi: bekas, Tahun pembuatan: 2007, jam operasional: 67.000 h, gaya penjepit: 250 kN, volume langkah: 530 cm³, tekanan injeksi: 2.426 batang, berat keseluruhan: 14.200 kg, diameter konveyor sekrup: 50 mm, Payment terms: 100% prior to collection of the machine, strictly net Njdowz R Iujpfx Abwelc Delivery time: by arrangement Freight basis: ex location

Tahun pembuatan: 2019, jam operasional: 17.716 h, Kondisi: siap digunakan (bekas), Data Umum Njdpox D Nx Iofx Abwelc Lebar pengukuran: 1920 cm Kedalaman pengukuran: 7750 cm Berat mesin: 26210 kg Tinggi pengukuran: 2410 mm SUMITOMO SHI DEMAG El-Exis SP 350/820-920 diproduksi pada tahun 2019. Mesin injection moulding listrik yang kokoh dengan diameter sekrup 40 mm dan gaya penahan 3.500 kN. Mesin ini telah beroperasi selama 17.716 jam dengan 12.440.761 siklus, memastikan kapasitas produksi yang tinggi. Jangan lewatkan kesempatan untuk membeli mesin injection moulding listrik SUMITOMO SHI DEMAG El-Exis SP 350/820-920 ini. Hubungi kami untuk informasi lebih lanjut. Jenis Aplikasi Injection Moulding

Tahun pembuatan: 2019, jam operasional: 18.138 h, Kondisi: siap digunakan (bekas), berat keseluruhan: 25.340 kg, SUMITOMO SHI DEMAG El-Exis SP 350/820-1600 ini diproduksi pada tahun 2019. Mesin injeksi listrik yang kokoh ini memiliki diameter ulir 50 mm, gaya penutupan 3.500 kN, dan jarak antara tiang 820 mm. Mesin ini telah mencatat 18.138 jam operasi dengan 12.875.090 siklus. Jika Anda mencari mesin injeksi berkualitas tinggi, pertimbangkan SUMITOMO SHI DEMAG El-Exis SP 350/820-1600 yang kami tawarkan untuk dijual. Informasi tambahan: • Diameter ulir: 50 mm • Volume dosis maksimum: 530 cc • Jumlah siklus: 12.875.090 • Jarak antara tiang: 820 mm • Gaya penutupan: 3.500 kN Nledpex D Nxzsfx Abwoc

Kondisi: sangat baik (bekas), Tahun pembuatan: 2012, Sumitomo Demag Systec 350/720-2300 / Production Line with Wittmann-Demag DR833 Robot Year of manufacture: 2012 Injection unit: Screw diameter: 70 mm Shot weight: 1103 g Injection pressure: 1877 bar Dosage volume: 1212 cm³ Clamping unit: Clamping force: 350 t Tie bar spacing: 720x720 mm Platen size: 1040x1060 mm Ejector: hydraulic Clamping unit: toggle lever Control: NC5 Additional equipment: Euromap 67 Robot interface Air valve x 5 Hydraulic core pull with proportional valve, controlled x 1 Hot runner controller x 5 Injection unit hardened – bimetal Moog proportional valve on the injection unit – precise injection Parallel movements Central lubrication 3 hydraulic pumps with variable output Integrated printer Machine regularly serviced by authorized Sumitomo Demag service Nlsdpfx Abozc Nwcowjc Robot Wittmann-Demag DR833 Year of manufacture: 2011 4-axis robot: 3 axes driven by servo motors (electric), Y-axis telescopic; C-axis pneumatic, A-axis movement Travel range in axes: X-900, Y-1600, Z-3000 Touch control panel Robot safety package Robot with adapter, conveyor belt, and safety enclosure Purchase of robot and conveyor possible at additional cost Dimensions: Weight: 15,750 kg Length/width/height: 8.26x2.01x2.27 m All offered machines are started up by our service technicians before sale. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our facility in Łódź. Price: On request

Kondisi: sangat baik (bekas), Tahun pembuatan: 2015, Sumitomo Demag Systec 350/720-2300 / Production line with Wittmann-Demag DR853 robot Year of manufacture: 2015 Injection Unit: Screw diameter: 70 mm Shot weight: 1103 g Injection pressure: 1877 bar Dosage volume: 1212 cc Njdpfx Abjzc Nv Sewolc Clamping Unit: Clamping force: 350 t Tie bar spacing: 720x720 mm Platen size: 1040x1060 mm Ejector: hydraulic Clamping system: toggle lever Control system: NC5 Additional Equipment: Euromap 67 Robot interface Control system with air valve Control system with 5 hot runner zones Hardened injection unit - bimetallic barrel Moog proportional valve on injection unit – precise injection Parallel movements Central lubrication 3 variable-displacement hydraulic pumps Built-in printer The machine has been regularly serviced by authorized Sumitomo Demag service Robot Wittmann-Demag DR853 Year of manufacture: 2016 6-axis robot: 5 axes driven by servo motors (electric): X, telescopic Y, Z, B, C Axis travel ranges: X-1200, Y-2400, Z-4000 Touchscreen control panel Robot safety package Robot with adapter, conveyor belt, and safety enclosure Purchase of the robot and conveyor available at extra cost Dimensions: Weight: 15,750 kg Length/Width/Height: 8.26x2.01x2.27 m All machines offered are started up by our service technicians prior to sale. It is possible to obtain a video of the technical tests of the selected machine or to participate in live technical tests at our facility in Łódź. Price: On request

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2015, jam operasional: 15.642 h, diameter sekrup: 45 mm, tinggi total: 2.213 mm, berat keseluruhan: 15.750 kg, This SUMITOMO SHI DEMAG Systec SP 350/720-840 was manufactured in 2015. It is a hydraulic injection moulding machine, ideal for precise plastics processing. Take advantage of this opportunity to purchase the SUMITOMO SHI DEMAG Systec SP 350/720-840 hydraulic injection moulding machine. Please contact us for further information. Additional equipment • Fanuc robot Machine benefits Quality-related machine benefits • Process data acquisition, mould protection Technical machine benefits • Minimum mould height: 350 mm / maximum mould height: 745 mm • Electronic main connection: 3/400 V 50Hz • Programmable sequence, high-dynamic feed speed, hydraulic pressure-dependent hold pressure control, digital/wear-free position measuring system. Additional information Standard equipment: Support of the movable platen via linear guides/ Ejector with short/long stroke/ Nodpfxsx D Hnto Abwelc Interface for external printer (hard copy)/ Individual motion optimization of the axes (activeAdjust)/ Four-stage mould closing and four-stage mould opening sequence/ Increased pump drive power II (59.0 kW)/ Mains voltage 400 V ±10% / 50 Hz, 3 phases + N + PE/ Separate mains connection for drive / heating/ Coloured data display/ Enhanced oil cooler (cooling water supply up to 35 °C)/ Separate water connections for mould and machine cooling/ Basic version Europe/ Corrosion protection/ Painting: Jet Black (RAL9005): machine bed with built-in parts, lower control cabinet/ Signal White (RAL9003): clamping unit, injection unit, nozzle guard/ Signal White (RAL9003): fixed safety devices, upper control cabinet/ Signal White (RAL9003): protective doors/ Textured surfaces: Elastic machine mounts/ Digital and wear-free position measuring system (ultrasonic/high-resolution encoders for injection, mould and ejector movement)/ Mould connection dimensions type E (EUROMAP March '96)/ Centre diameter fixed platen: 160 mm/ Centre diameter moving platen: 160 mm/ Without side ejector plate/ Standard mould installation height: Min: 350 mm/ Max: 745 mm/ Standard closing speed (movements only with protective door closed)/ Ejector with position control (P/F+V independently programmable, parallel to mould movement)/ Oil lubrication of toggle/ Injection unit/ Optional equipment: Servo-controlled pump (activeDrive)/ Emergency stop switch on the operator side/ Separate opener for fine filtration in bypass (activeCool&Clean)/ Socket 1 x Schuko (230V / 10A), switchable via main switch/ Socket IECEE 3Ph / 400V-16A, switchable via main switch/ Signal beacon/ Operation with protective door open (operator side)/ 6 pneumatic 5/2-way valves on the moving platen (programmable)/ 6 pneumatic 5/2-way valves on the fixed platen (programmable)/ Central maintenance unit for pneumatic valves/ 1-circuit core pull via proportional valve (programmable, with check valves)/ Manual pressure relief for 1-circuit core pull/ Widened protective cover on operator side (250 mm)/ Hot runner control 12 zones, integrated (2.75 kW)/ Pneumatic hot runner nozzle control (1x 5/2-way valve)/ Clamping force control/ Active mould protection via sensor during closing (activeQ)/ Manually adjustable monitoring switch for mould-open position/ Central grease lubrication (manual)/ Material hopper for automatic filling/ Hopper shut-off with emptying option/

Kondisi: sangat baik (bekas), Tahun pembuatan: 2013, gaya penjepit: 3.500 kN, diameter sekrup: 60 mm, jarak antara tiang: 720 mm, volume langkah: 763 cm³, tekanan injeksi: 1.905 batang, berat injeksi: 695 g, tinggi cetakan (min.): 350 mm, berat keseluruhan: 15.540 kg, pl-en-001 Nedpfxezcnm No Abwelc

Kondisi: hampir baru (bekas), Tahun pembuatan: 2023, Technical data: Maximum clamping force: 3,500 kN Maximum holding force: 3,850 kN Opening stroke: 725 mm Minimum mold installation height: 400 mm Maximum mold installation height: 900 mm (extended) Clamping platen size (H x V): 1,168 x 1,144 mm Clear tie-bar spacing (W x H): 830 x 830 mm Maximum mold weight: 6,600 kg Maximum weight on moving platen: 3,800 kg Nodpjy Hmfyofx Abwelc Maximum weight on fixed platen: 5,100 kg Ejector stroke: 250 mm Increased ejector force: 100 kN Maximum ejector speed: 270 mm Screw diameter: 60 mm Injection pressure: 2,426 bar Maximum injection volume: 891 cm³ Maximum injection speed: 160 mm/s Maximum dosing stroke: 315 mm Maximum nozzle stroke: 520 mm Nozzle immersion depth: 20 mm Back pressure over dosing stroke is programmable Installed barrel heating: 23.1 kW Material hopper volume: 110 l Weight: approx. 21 t Accessories: Robot: Manufacturer: SEPRO ROBOTIQUE (France) Type: 5T35 2000/900/TE-1800 Year of manufacture: 2023 Stroke: 2,000 mm Speed: 3.5 m/s Horizontal demolding stroke Y-axis: 900 mm Vertical demolding stroke X-axis: 1,800 mm Robot console mounted on fixed platen Gripper function R1 (C-) axis pneumatic 0° - 90°, including quick-change plate Weight: 583 kg MuCell integration: The special option includes: • Plasticizing cylinder with pneumatic shut-off nozzle without mixing element and non-return valve; • Interface (communication, emergency stop interface); • Software with functional display pages for controlling the MuCell function; • Adapted nozzle area protection; • High-speed, position-controlled screw (analog ZE388) Conveyor belt: Width: 870 mm Usable width: 800 mm Length: 3,500 mm Height: 880 - 1,220 mm Load capacity: 38 kg/m² Belt speed: 5.7 m/min Number of frames: 2 Clear tunnel height: 500 mm This injection moulding machine comes fully equipped!! Condition: As-new condition, only 5,290 operating hours.

Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: Nadelverschlussdüse ( Federbetätigt ), Needle shut-off nozzle (spring-actuated) Thread M60x3 Designation G70 1198 / 392/199 Condition: New Nsdov Ancgjpfx Abwjlc

Kondisi: sangat baik (bekas), Viessmann Vitoplex 300/720 kW/suhu rendah/ketel pemanas/atas permintaan dengan burner minyak atau gas Nlodpexv Exbefx Abwoc

Kondisi: sangat baik (bekas), Tahun pembuatan: 2013, Sumitomo Demag Systec 100/420-310 with Sepro SR SDR11 S3 TRANS Robot / Hybrid Machine Year of manufacture: 2013 Injection Unit: Screw diameter: 35 mm Shot weight: 149 g Injection pressure: 2024 bar Dosing volume: 168 ccm Clamping Unit: Clamping force: 100 t Tie bar spacing: 420x420 mm Platen dimensions: 600x600 mm Ejector: hydraulic Clamping system: hydraulic Control system: NC5 Additional equipment: Hybrid machine: high-speed, energy-saving and very quiet Operating hours: approx. 38,000 h in automatic mode Robot interface Air valve x 2 Hydraulic core pull x 1 Injection unit hardened - Bimetal Main motor of the machine - Servo motor driven with inverter - Energy saving Built-in printer Machine has been regularly serviced by authorized Sumitomo Demag service Robot Sepro SR SDR11 S3 TRANS Year of manufacture: 2013 5-axis robot: 3 axes driven by servo motors (electric); axes A and C (rotation) - pneumatic Touch control panel Robot safety package Robot with adapter, protective enclosure Purchase of the robot at extra cost Dimensions: Weight: 4400 kg Length/Width/Height: 4.20x1.40x2.00 m All offered machines are started up by our service technicians prior to sale. It is possible to receive a video of the technical tests for the selected machine or to participate in live technical tests at our facility in Łódź. Nlodpfx Abezc Nv Ejwoc Price: On request.

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2017, jam operasional: 3.548 h, gaya penjepit: 1.600 kN, diameter sekrup: 45 mm, berat injeksi: 294 g, berat keseluruhan: 6.983 kg, Hydraulic injection moulding machine from 2017. This SUMITOMO SHI DEMAG Systec 160/520-600 features a clamping force of 1600 kN and a tie bar spacing of 520 mm. The machine is equipped with an injection unit with screw diameters of 40 mm, 45 mm, and 50 mm, and a maximum shot weight of 313 g. If you are looking for high-quality injection moulding machines, consider the SUMITOMO SHI DEMAG Systec 160/520-600 unit we have for sale. Contact us for further details. • Tie bar spacing: 520 mm • Injection unit: 600 • Control system: S-Dias • Screw diameter: 45 mm • Injection pressure: 1914 bar • Shot volume: 294 cm³ • Shot weight (PS): 254 g • Injection stroke: 469 mm • Installed heating capacity: 11.3 kW • Oil tank capacity: 290 l Nlodpszbh Epofx Abwoc • Pump drive power: 25 / 45 kW • Noise level: 69 dB(A) • Dimensions: 5.6 x 2.1 m • Main electrical connection: 3/400 V, 50 Hz, 167 A • Maximum pressure: 190 bar • Platen size: 770 x 770 mm • Maximum mould weight: 1,300 kg • Maximum opening stroke: 500 mm • Min/Max mould height: 275 / 685 mm • Distance between platens: 1085 / 1185 mm

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2020, jam operasional: 8.000 h, gaya penjepit: 500 kN, diameter sekrup: 25 mm, berat injeksi: 46 g, tinggi total: 1.779 mm, berat keseluruhan: 4.200 kg, This SUMITOMO SHI DEMAG Intelect 2 50/370-110 was manufactured in 2020. It is equipped with a fully electric direct drive system and the NC5+ control unit for enhanced energy efficiency and precise injection dynamics. The package includes a granulate dryer, industrial robot, conveyor belt, and temperature control units, making it ideal for high-quality injection molding processes. Please contact us for further information about this machine. Additional Equipment • Granulate dryer • Handling system • Conveyor belt – 1400 mm x 400 mm • Precision scale • Temperature units – 2x HB-Therm Machine Advantages Technical Machine Advantages • Exceptional energy efficiency • Increased platen rigidity and mold safety • Fully electric direct drive • Ultra-precise direct drive motors with a 0.1 ms response time • Displacement: 52 cm³ • Injection pressure: 2180 bar • Clamping plates: 520 x 570 mm Additional Information Control Unit Modern control system with NC5+ Automatic mold height and clamping force adjustment Energy-saving routines Nsdpjx D Eccsfx Abwslc Dimensions Machine depth: 4308 mm

Kondisi: bekas, Tahun pembuatan: 2018, jam operasional: 7.453 h, Excavator rantai, Volvo EC 300 CL dengan GPS, AC, quick coupler. Baru 7.453 jam operasi. Kondisi sangat baik. Njdpsx Amvnefx Abwslc

Kondisi: siap digunakan (bekas), Siemens 6AV7872-0BF30-0AC0 Simatic Panel PC 677B (AC) 15" Touch Industrial PS, SN: VPW7857742, serial number as per photo, used, good condition, 100% functional, scope of delivery as per photos Nljdpfxsi Edgte Abwjc

Kondisi: siap digunakan (bekas), Siemens 6AV7872-0BF30-0AC0 Simatic Panel PC 677B (AC) 15" Touch Industrial PS, SN: VPW7857746, serial number as shown in the photo, used, in good condition, 100% operational, scope of delivery as per photos Nledpfei Edgwjx Abwoc

Kondisi: siap digunakan (bekas), Siemens 6AV7872-0BF30-0AC0 Simatic Panel PC 677B (AC) 15" Touch Industrial PS, SN: VPWN854125 Serial No. as per photo, used, good condition, fully functional, scope of delivery as shown in photos. Nledji Edg Nspfx Abwsc

Kondisi: siap digunakan (bekas), Siemens 6AV7872-0BF30-0AC0 Simatic Panel PC 677B (AC) 15" Touch Industrial PS, SN: VPW7857747, serial number as shown in photo, used, in good condition, fully functional, scope of delivery as per photos. Nlsdpsi Edgzofx Abwoc

Kondisi: siap digunakan (bekas), Siemens 6AV7872-0BF30-0AC0 Simatic Panel PC 677B (AC) 15" Touch Industrial PS, SN: VPC3851071, serial number as per photo, used, in good condition, fully functional, scope of delivery as shown in photos. Nledpji Edgdofx Abwsc

Kondisi: siap digunakan (bekas), Siemens 6AV7872-0BF30-0AC0 Simatic Panel PC 677B (AC) 15" Touch DC 24V Industrial Power Supply, SN: VPW7857741 Serial No. as per photo, used – excellent condition, 100% fully functional, scope of delivery as shown in the photos Nledpei Edgpjfx Abwsc