Beli Thermofisher / Dionex Ultimate 3000 bekas (5.283)

Kondisi: bekas, Dionex / ThermoFisher FLM: Temperature range: 5–70 °C (max. 15 °C below ambient temperature) Temperature accuracy: ±0.5 °C Temperature stability: ±0.1 °C Temperature precision: ±0.1 °C Column capacity: Up to 3 columns, max. 30 cm length Heating time: From 20 to 50 °C in less than 25 min (at 23 °C ambient temperature, ±0.5 °C) Cooling time: From 50 to 20 °C in less than 35 min (at 23 °C ambient temperature, ±0.5 °C) Control: All functions software-controlled via USB 1.1 I/O interfaces: 2 digital inputs, 2 programmable relay outputs Column identification: Electronic identification system for 3 columns Switching valves: 1 or 2 thermostated microvalves with low dispersion (10 ports or 6 ports) Flow splitter: Nano-, capillary- or thermostated micro-flow splitter with flow splitter identification system Flow control: Electronically controlled and actively balanced flow splitter, Cjdpfx Asxtb Efog Dorb independent of solvent composition and back pressure Column flow rate range: 50 nL/min to 2.5 mL/min using a predefined splitter and active flow control Flow rate selection range: 50 nL/min to 1000 nL/min (using a nano-LC splitter) 0.5 μL/min to 10 μL/min (with a capillary LC splitter) 10 μL/min to 160 μL/min (with a micro-LC splitter) Gradient delay time: Typically < 1.5 min at 200 nL/min to splitter output Max. column pressure: 35 MPa (4900 psi) Wetted parts: Fused silica, stainless steel (1.4571, 316L), PEEK; Waste line: PTFE, aluminium oxide (Al2O3) Safety features: Moisture sensor, gas sensor, and leak detector for the flow control valve VWD Optical design: Dual-beam photometer (monochromator) Multi-wavelength UV/VIS detector Light source: VWD-3400RS: Deuterium lamp and tungsten lamp Temperature control for both lamps Wavelength range: 190 to 900 nm Tungsten lamp recommended for wavelengths > 600 nm. Noise: At one wavelength:

Kondisi: sangat baik (bekas), Here we offer an ICS system. Flow rate range: 0.000 to 10.000 ml/min (analytical); 0.000 to 3.000 ml/min (capillary) Flow rate accuracy: < 0.1% Flow rate precision: < 0.1% Cjdpfxjhh Ibts Ag Dorb Gradient dosing accuracy and precision: ±0.5% at 2 ml/min (analytical only) Pressure range: 0 to 35 MPa (0 to 5,000 psi) (analytical); 0 to 41 MPa (0 to 6,000 psi) (capillary) Dimensions (H x W x D): 14 x 8.25 x 19 in. (36 x 21 x 48 cm) Weight: 24.1 kg (55 lb.) (ICS-5000) Power supply: 9 to 265 V AC, 47 to 63 Hz The system consists of the following components: - ICS-5000 plus dual pump - 6-Port Valve MXP9900-000 - AFC-3000 Automated Fraction Collector - RFC-10 Controller Condition: used Scope of delivery: (see images as shown) (Specifications subject to change; errors excepted!) Should you have any further questions, please feel free to contact us by phone.

Kondisi: baik (bekas), Model No. SHKA3000 Mesin berjalan pada 120V! Jika diperlukan, kami akan menyediakan konverter tegangan. Lebar (inci/cm): 29,4 in (74,7 cm) Tinggi (inci/cm): 9,7 in (24,6 cm) Panjang (inci/cm): 25,8 in (65,5 cm) Berat (lbs/kg): 171 lbs (77,6 kg) Tegangan (AC): 120 Credpfx Aex R Tvtog Djb Arus (Ampere): 1,0 Daya (Watt): 100 Frekuensi (Hz): 50/60 Kecepatan: 40 hingga 400 rpm, ±10 rpm Timer: Kontinu atau waktu dari 1–60 menit Kondisi mesin baik. Silakan cek daftar produk kami yang lain.

Kondisi: bekas, Angeboten wird ein Thermo Scientific Dionex AS-DV Autosampler. Das Gerät befindet sich in voll funktionsfähigem Zustand und ist sofort einsatzbereit. Bitte beachten Sie, dass ULM weder eine Überprüfung noch eine Garantie für die Bereitstellung von Software übernimmt. Software: Thermo Scientific Chromeleon 7 Lizenzschlüssel USB- Chromeleon CDS Chromatographie-Software ist speziell für Labor und IT entwickelt und ermöglicht sowohl hohe Produktivität als auch regulatorische Konformität durch automatisierte Steuerung, Datenanalyse und Sicherheitsfunktionen. Der Thermo Scientific™ Dionex™ AS-DV Autosampler ist eine innovative Lösung zur Automatisierung der Probenhandhabung in Routineanwendungen der Ionenchromatographie. Er wurde zur Steigerung der Produktivität bei gleichzeitiger Kosteneffizienz entwickelt und ist ideal für Labore mit Fokus auf Ionen- und Wasseranalysen. Hauptmerkmale: Automatisierte Probenhandhabung: - Random Access und Flexibilität: Ermöglicht Random-Access für Mehrfachinjektionen und Filtration, sodass Proben effizient ohne manuelle Eingriffe verarbeitet werden können. - Hohe Reproduzierbarkeit: Gewährleistet dank präziser Mechanik zur Steuerung von Dosiergeschwindigkeit und -volumen konsistente Ergebnisse. Benutzerfreundliche Bedienung: - Hinweis: ULM überprüft oder garantiert nicht die Software-Bereitstellung. - Chromeleon™ CDS Software: Die leistungsstarke Software vereinfacht die Programmierung von Injektionsschleifen und Konzentratorkolonnen und ermöglicht die einfache Einstellung optimaler Parameter. Erweiterte Probenvorbereitung: - Optionales Sechs- oder Zehn-Port-Ventil: Bietet erweiterte Möglichkeiten für komplexe Probenvorbereitung, wie Matrixeliminierung und Probenkonzentration, zur Steigerung der Analysefähigkeiten. Leistung & Kompatibilität: - Nadel und Flussweg: Komplett aus Thermo Scientific™ PEEK™ gefertigt, garantiert Langlebigkeit und minimale Kontamination. - Vial-Kompatibilität: Unterstützt 5,0 mL und 0,5 mL Polymer-Vials; Filterkappen können für automatische Filtration verwendet werden, was bessere Ergebnisse fördert. - Injektionsvolumenbereich: Unterstützt Volumina von 0,1 bis 5 mL und somit verschiedene experimentelle Anforderungen. - Probenkapazität: Bietet Platz für bis zu 50 Vials beliebiger Größe oder eine Kombination daraus und ist dadurch sehr vielseitig. Technische Daten: Abmessungen: Höhe: 23 cm (9 Zoll) Crjdpfoxhf Utjx Ag Dsb Breite: 44,45 cm (17,5 Zoll) Tiefe: 56 cm (22 Zoll) Gewicht: 16 kg Geschwindigkeitsregelung: Einstellbar von 0,1 bis 5,0 mL/min in 0,1 mL/min Schritten. Spannung: Kompatibel mit 100/240 V. Kompatibilität: Funktioniert nahtlos mit verschiedenen ICS-Systemen, einschließlich ICS-5000, ICS-2100, ICS-1600, ICS-1100, ICS-900 sowie älteren IC-Systemen.

Kondisi: baik (bekas), pl2hu-01 Codpfx Ajx Tuyxeg Djrb

Kondisi: baik (bekas), Technical data for the shelving rack: Shelving system: SSI Schäfer Type: R 3000 Technical setup data: Number of rack rows: 1 unit Rack length: 3,290 mm Crsdpfxoy Hpn Re Ag Deb Number of bays per rack row: 2 units Scope of delivery includes: 3x Shelving rack uprights, used Material finish: Sendzimir galvanized Design: slotted Adjustment pitch: 26.5 | 26.5 mm Frame profile dimensions: 31x60x0.88 mm Weight per unit: approx. 8.92 kg Incl. cross brace and base plates (Rack uprights are pre-assembled) 2,490 mm high 600 mm deep 12x Shelves, used Material finish: Sendzimir galvanized For upright depth: approx. 600 mm Total width: approx. 1,600 mm Total depth: approx. 594 mm Height: approx. 30 mm Weight per unit: approx. 8.12 kg Max. load per shelf: 75 kg, with uniformly distributed load. 48x Shelf supports, used Suitable for plain uprights Material finish: Sendzimir galvanized 1x Cross brace, used Type designation: KV31313 Weight per unit: approx. 0.405 kg Material finish: Sendzimir galvanized 1x Load capacity sign Showing bay and shelf loads, manufacturer and commission number Dimensions: 297 x 210 x 2 mm Your contact persons at our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is offered for collection only. Transportation or shipment beyond this can be arranged at additional cost, which can be individually quoted depending on the delivery location and scope of supply.

Kondisi: baik (bekas), Technical data for the shelving rack: Shelving system: SSI Schäfer Type: R 3000 Setup specifications: Number of rack rows: 01 pc. Rack length: 4,920 mm Number of sections per rack row: 03 pcs. Included in delivery: 04 x Shelf uprights, used Material finish: sendzimir galvanized Version: slotted Adjustment grid: 26.5 | 26.5 mm Frame profile dimensions: 31x60x0.88 mm Weight / pc.: approx. 8.92 kg Cjdpfey E S Htox Ag Derb Incl. bracing bar and base plates (rack uprights pre-assembled) 2,490 mm high 600 mm deep 18 x Shelf panels, used Material finish: sendzimir galvanized for upright depth: approx. 600 mm Total width: approx. 1,600 mm Total depth: approx. 594 mm Height: approx. 30 mm Weight / pc.: approx. 8.12 kg Max. load per shelf panel 75 kg, with evenly distributed load. 72 x Shelf panel supports, used suitable for smooth uprights Material finish: sendzimir galvanized 01 x Cross brace, used Type: KV31313 Weight / pc.: approx. 0.405 kg / pc. Material finish: sendzimir galvanized 01 x Load capacity sign with field and shelf load data, manufacturer and commission number Dimensions: 297 x 210 x 2 mm Your contacts at our company: Mr: Andre Evering Mr: Mario Klöver Mr: Falk Deutsch General information on the item: This item is offered for pickup only. If additional transport or shipping is desired, this will incur extra costs, which can be specified separately depending on destination or scope of delivery upon request.

Kondisi: baik (bekas), Technical Data for Shelf Rack: Crodpey E N Nxofx Ag Djb Racking System: SSI Schäfer Type: R 3000 Technical Data for Installation: Number of rack rows: 01 pcs. Rack length: 6,560 mm Number of bays per rack row: 04 pcs. Scope of delivery includes: 05x Upright frames, used Material color: sendzimir galvanized Design: slotted Adjustable pitch: 26.5 | 26.5 mm Frame profile dimensions: 31x60x0.88 mm Weight / unit: approx. 8.92 kg Incl. bracing bar and base plates (upright frames pre-assembled) 2,490 mm high 600 mm deep 24x Shelves, used Material color: sendzimir galvanized for frame depth: approx. 600 mm Total width: approx. 1,600 mm Total depth: approx. 594 mm Height: approx. 30 mm Weight / unit: approx. 8.12 kg Max. load per shelf 75 kg, evenly distributed load. 96x Shelf supports, used suitable for smooth uprights Material color: sendzimir galvanized 02x Cross bracing, used Type designation: KV31313 Weight / unit: approx. 0.405 kg / unit Material color: sendzimir galvanized 01x Load capacity sign with specifications for bay and shelf loads, manufacturer and commission number Dimensions: 297 x 210 x 2 mm Your contacts in our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information on the item: This item is offered for collection only. Any transport or shipping of this item beyond this must be arranged separately; costs will vary according to delivery location and scope of delivery and can be requested from us.

Kondisi: baik (bekas), Technical data for the shelf rack: Racking system: SSI Schäfer Type: R 3000 Technical details regarding setup: Number of shelving rows: 01 piece Rack length: 8,190 mm Number of bays per row: 05 pieces Scope of delivery includes: 06x Shelf rack uprights, used Material finish: sendzimir galvanized Design: slotted Adjustment grid: 26.5 | 26.5 mm Frame profile dimensions: 31x60x0.88 mm Weight / piece: approx. 8.92 kg Including crossbars and baseplates (Rack uprights are pre-assembled) Height: 2,490 mm Depth: 600 mm 30x Shelves, used Material finish: sendzimir galvanized For upright depth: approx. 600 mm Overall width: approx. 1,600 mm Crsdpfx Agoy E Hm Ue Deb Overall depth: approx. 594 mm Height: approx. 30 mm Weight / piece: approx. 8.12 kg Max. load per shelf: 75 kg, with evenly distributed load. 120x Shelf supports, used Suitable for smooth uprights Material finish: sendzimir galvanized 02x Cross bracing, used Type designation: KV31313 Weight / piece: approx. 0.405 kg Material finish: sendzimir galvanized 01x Load capacity sign With details on bay and shelf loads, manufacturer and commission number Dimensions: 297 x 210 x 2 mm Your contact persons in our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the article: This item is offered for collection only. Any additional transport or shipping requirements are subject to additional costs, which can be specifically requested from us depending on the delivery location and scope of delivery.

Kondisi: baik (bekas), Data teknis rak lemari: Sistem rak: SSI Schäfer Tipe: R 3000 Termasuk dalam paket: Rak lemari, bekas Warna material: galvanis sendzimir Crodpfey Ex Rlex Ag Dob Lebar total: sekitar 994 mm Kedalaman total: sekitar 594 mm Untuk kedalaman rangka: sekitar 600 mm Tinggi: sekitar 30 mm Berat / unit: sekitar 5,16 kg Kontak Anda di perusahaan kami: Bapak: Andre Evering Bapak: Mario Klöver Bapak: Falk Deutsch Informasi umum tentang produk: Produk ini hanya ditawarkan untuk pengambilan langsung. Pengiriman atau transportasi tambahan akan menimbulkan biaya tambahan, yang dapat diminta secara terpisah tergantung pada lokasi pengiriman dan volume pesanan.

Kondisi: baik (bekas), en-001 Credpfxey Enpqe Ag Deb

Kondisi: sangat baik (bekas), pl-hu-01 Crodpfoyz Diljx Ag Dob

Kondisi: baik (bekas), en1 Crsdoyzyt Hepfx Ag Dob

Kondisi: baik (bekas), TECHNICAL DATA FOR SHELF RACKING: Rack System: SSI Schäfer Type: R 3000 Codpoyzwz Ujfx Ag Dorb Set-Up Details: Number of Rack Rows: 01 pc. Rack Length: 1,660 mm Number of Bays per Rack Row: 01 pc. Scope of Delivery Includes: 02x Shelf Uprights, used Material finish: Sendzimir galvanized Design: slotted Adjustment pitch: 26.5 | 26.5 mm Frame profile dimensions: 31 x 60 x 0.88 mm Weight per upright: approx. 8.92 kg Incl. cross beams and foot plates (Uprights are pre-assembled) Height: 2,490 mm Depth: 600 mm 06x Shelves, used Material finish: Sendzimir galvanized For upright depth: approx. 600 mm Total width: approx. 1,600 mm Total depth: approx. 594 mm Height: approx. 30 mm Weight per shelf: approx. 8.12 kg Max. shelf load: 75 kg with evenly distributed load. 24x Shelf Supports, used Suitable for slotted uprights Material finish: Sendzimir galvanized 01x Cross Brace, used Model designation: KV31313 Weight per piece: approx. 0.405 kg each Material finish: Sendzimir galvanized 01x Load Capacity Sign With specifications for bay and shelf loads, manufacturer, and commission number Dimensions: 297 x 210 x 2 mm Your contacts at our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is only offered for collection. Any further transport or shipping of this item is subject to additional costs, which can be inquired with us depending on the delivery location and scope.

Kondisi: siap digunakan (bekas), DE1042 Cjdpfx Asu Nu Rheg Djrb

Kondisi: baru, Tahun pembuatan: 2024, kapasitas angkut: 3.000 kg, Container turning device, welding table, welding positioner, roller stand Load capacity: 3,000 kg With foot remote control Continuously variable speed control: 80 to 1,600 mm/min Csdpfxsgu Edyo Ag Dsrb Suitable for diameters: 40 mm to 1,400 mm Roller diameter: 200 mm Dimensions (L x W x H): 800 x 370 x 450 mm Model and color deviation possible

Kondisi: baik (bekas), 2bfe7d71-c9c4-4f4d-9afe-377b786b8187 Crjdpfowvq Epex Ag Dob

Kondisi: bekas, Tahun pembuatan: 1995, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: TM-2006-31, Mesin tua, tapi masih berjalan dengan baik. Tersedia banyak sabuk amplas baru. Crjdpex Swmrefx Ag Djb

Kondisi: siap digunakan (bekas), Die Thermo Scientific Dionex ICS-Series VWD ist ein hochentwickelter Variabler-Wellenlängen-Detektor, der für die präzise und zuverlässige Detektion von Analyten in komplexen Proben entwickelt wurde. Er ist ein wesentliches Modul des Dionex ICS-Series Chromatographiesystems und für zahlreiche Anwendungen einsetzbar, beispielsweise in der pharmazeutischen Forschung und Entwicklung, der Umweltüberwachung sowie in der Lebensmittel- und Getränkeanalytik. Der Detektor ist mit einer modernen Durchflusszelle ausgestattet, die exzellente Signal-Rausch-Verhältnisse gewährleistet und somit außergewöhnliche Empfindlichkeit und Selektivität auch bei anspruchsvollen Trennungen bietet. Das Design der Durchflusszelle minimiert Dispersion und Peakverbreiterung, was eine hohe Auflösung und präzise Peakerkennung sicherstellt. Der Thermo Scientific Dionex ICS-Series VWD-Detektor verfügt über einen variablen Wellenlängenbereich von 190 bis 900 nm, sodass eine breite Palette an Analyten detektiert werden kann. Dank der Hochgeschwindigkeitsabtastung ist eine schnelle Datenaufnahme und -auswertung möglich, was das Gerät ideal für Anwendungen mit hohem Probendurchsatz macht. Gerät in gutem, funktionsfähigem Zustand. Crjdpfx Agoxnm Rvj Djb Bitte sehen Sie sich auch unsere weiteren Angebote an.

Tahun pembuatan: 2021, Kondisi: hampir baru (bekas), Centrifuge Thermo Micro CL 17, tanpa pendingin, 17000g, rotor 24 tempat untuk tabung 1,5/2ml. Seperti baru! Direkomendasikan! Pengiriman tersedia. Crodpfx Aow Rmrmeg Dsb

Tahun pembuatan: 2015, jam operasional: 10 h, Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: SN 15101588 SP 082988, Automatic sample extractor Thermo Scientific Dionex ASE 350 for high-efficiency extraction of solid samples under high pressure and elevated temperature conditions Automatic sample extractor Thermo Scientific Dionex, model ASE 350, equipped with a carousel for 24 extraction cells with a capacity ranging from 1 to 100 ml, a carousel for collection bottles with a capacity of 60 ml and 250 ml, and a solvent management module. Additional equipment offered with the extractor: - 6 extraction cells with a capacity of 22 ml each - 2 solvent bottles with a capacity of 2 liters each Cedpfxjwm Ario Ag Djrb - 2 bottle adapters with screw caps Purchase date: December 2015 The ASE 350 system is a fast extractor that simplifies sample preparation for virtually any application requiring extraction from soil, sediments, or plant/animal-derived material. Technical details: 1. Extractor weight: 65 kg. A suitably stable laboratory bench is required. 2. Power supply: 230 V, 50 Hz, 16 A fuse required. 3. Operation requires nitrogen of 99.99% purity. The pressure regulator should allow adjustment of the output gas pressure between 1.03–1.38 MPa. 4. Optionally, in addition to nitrogen, air can be used for controlling the device’s pneumatics. The air should be 99.99% pure, and the source should allow for output gas pressure adjustment between 0.4 MPa and 0.8 MPa. NOTE: AIR DOES NOT REPLACE NITROGEN, WHICH IS ESSENTIAL; AIR MAY BE REPLACED BY NITROGEN. 5. Dimensions: 750 x 600 x 700 mm (width x depth x height).

Tahun pembuatan: 2022, Kondisi: seperti baru (mesin pameran), Fungsionalitas: berfungsi sepenuhnya, FTIR spectrometer for sale - NICOLET IS20 MID-IR DTGS spectrometer, which was used for one year as part of a research project. Operated in a laboratory environment; no damage. Scope of delivery: 1x NICOLET IS20 MID-IR DTGS spectrometer 1x IS20 German device labeling 1x European Schuko plug, 250V 1x ATR ITX Base 1x AR diamond crystal for Smart iTX ATR 1x COMP-U-16 upgrade from 20" monitor to 24" monitor 1x iS10-iS20 transmission accessory Crodorklx Iepfx Ag Dob 1x ST JAPAN ATR-FTIR Polymer Bundle 1x DELL OPTIPLEX 3090 MT - i3-10105 8GB Original price: €31,998.77 Sale EXW, as is

Kondisi: sangat baik (bekas), Approx. 3,000 m² two-storey steel construction platform Used equipment, good condition, see photos Manufacturer: STOW Length: approx. 58.5 m Width: approx. 54.6 m Codpfed S S E Ujx Ag Dorb Height to lower edge: 3.4 m Height to upper edge: 3.7 m Load capacity: 500 kg/m² Constructed with C-profiles and Sigma profiles Bolted with nuts and bolts Longitudinal grid spacing adjustable Floor construction: 38 mm high-density chipboard, tongue and groove Underside white, upper side coated grey Negotiation price: Offer on request! Partial sale possible! Dismantled and loaded Goods are in stock. Transport costs on request. Inspection possible at any time by appointment. Further information on request. Constantly over 5,000 linear meters of pallet racks in stock from various manufacturers. (Subject to changes and errors in technical data, specifications, and prices as well as prior sale! See our General Terms and Conditions, all prices excl. VAT ex stock) Purchase / Sale We are constantly looking for or offering numerous items from various sectors broom-clean plant clearances business liquidations Fast - flexible - responsive! We also clear out or dispose for insolvency administrators. Write to us with a few keywords and we will get back to you promptly. To access our page, please click on our logo!

Kondisi: bekas, Listing ini untuk Sistem Dionex HPLC: Dionex AS3500, Dionex GP50 Gradient Pump, Dionex ED50 Electrochemical Detector, Dionex AD250 Absorbance Detector, Dionex LC25 Chromatograph Oven, baki botol. Sistem ini telah dipindahkan dari laboratorium dalam kondisi kerja yang baik, telah dirawat dengan baik dan masih dalam kondisi sangat baik. Csdpfx Agoxzhm So Djrb Peralatan dapat diservis/direnovasi/direkondisi sesuai permintaan dengan biaya tambahan.

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, We offer a high-productivity 3D printer for industrial series production. Trumpf TruPrint 3000 G02 with the following options: Zirox sensor, single laser, powder bed monitoring. Trumpf TruPrint 3000 incl. filter unit Serial number: S0721Q0022 Laser runtime: Laser beam on 17,508 hours The system was last used with aluminum AlSi10Mg. Crsdpfovu Ticjx Ag Dob The 3D printer has already been dismantled by the manufacturer. Dismantling protocols and functional documentation are available, proving that the machine was operational prior to disassembly. All axes have been properly secured by specialists. The machine can be transported on a standard commercial truck. Accessories: - 4x dosing containers - 1x build cylinder - 1x overflow container - Various spare parts such as protective glass, etc. - Manuals The Armanni CAR.Elev. pallet truck for container replacement is also in stock and can optionally be included in the offer. Rapid production of high-quality 3D components D1. Machine Concept The TruPrint 3000 is a universal medium-format machine with external part and powder management for the industrial production of complex metallic components using 3D printing. Its large build volume offers high flexibility regarding the size, quantity, and geometry of the respective application. Technical data TruPrint 3000 Build volume (cylinder) mm x mm: Ø 300 x H 400 Processable materials5: Weldable metals in powder form, such as stainless steels, tool steels, aluminium, nickel-base, cobalt-chrome, copper, titanium, or precious metal alloys. Build rate6 cm³/h: 5 – 60 Layer thickness7 μm: 20 – 150 Laser source (TRUMPF fiber laser) W: 500 Beam diameter μm: 100 – 500 O₂ concentration ppm: 100 Exposure speed (powder bed) m/s: 3 Monitoring: Condition monitoring, performance monitoring. Option: Powder bed monitoring. Preheating (substrate plate) °C: 200 Shielding gas: Nitrogen, argon Power supply V / A / Hz: 400 – 32 – 50/60 Dimensions (incl. filter) mm: 3385 x 1435 x 2225 Weight (incl. filter) kg: 4300 Subject to change. The details provided in our quotation and order confirmation are decisive. Technical Data TruPrint 3000 Table 3