Beli Traub Schrägbett-Drehmaschine bekas (243)

Kondisi: baik (bekas), Tahun pembuatan: 1994, TRAUB TNS 65 D / Pusat Bubut-Milling CNC 5-sumbu -Kontrol: TX8 D -Data teknis lengkap lihat foto -Tahun pembuatan 1994 -Magasin pemuatan Hydrobar -Beragam dudukan alat berpenggerak -Dudukan alat Njdpfxoyc Nnzo Aa Uelb -Cekam tiga rahang -Dokumentasi lengkap Kesalahan dan kekeliruan entri dapat terjadi

Tahun pembuatan: 1984, Kondisi: siap digunakan (bekas), s1 Nledpfx Ajy Uyf Nja Ujb

Kondisi: bekas, Tahun pembuatan: 1988, Technical details: Swing diameter over bed: 360 mm Swing diameter over cross slide: 160 mm Turning length: 800 mm Longitudinal travel (Z-axis): 810 mm Cross travel (X-axis): 205 mm CNC control: TX-8 Spindle bore: 60 mm Spindle speed: 63 - 3,150 rpm / 2-stage Rapid traverse: 10,000 mm/min Nlsdpfx Aaeu Rqabs Uob Tool turret - number of stations: 8 Operating hours / on-time hours: 8,834 h Tailstock taper: SK30 DIN 2080 Tailstock quill stroke: 105 mm Operating pressure: 40 bar Total power requirement: 38 kW Machine weight approx.: 3.1 t Machine dimensions approx. (LxWxH): 1.8 x 3.3 x 1.8 m Hydraulic unit dimensions: 580 x 400 x 750 mm Equipment: 200 mm diameter hydraulic chuck (without jaws) Feed force Z-axis = 8 kN and X-axis = 5 kN Coolant system Control panel Accessories: Fine adjustment device for tool setup

Kondisi: bekas, Tahun pembuatan: 1993, Detail Teknis: Gerak x: 400 mm Gerak y: 300 mm Gerak z: 400 mm Kecepatan spindle: 8000 rpm Kontrol: Fanuc OM Nlodeu Idn Hjpfx Aa Ujb Meja penjepit: 500x300 mm Jumlah tempat magazin: 16 buah Taper alat: SK40 Jarak spindle kerja/permukaan penjepit maks.: 50-450 mm Jumlah palet: 2 buah/part Kebutuhan daya total: 10 kW Berat mesin sekitar: 2,5 t Dimensi mesin (PxLxT): 2,4x1,8x2,5 m Ukuran transportasi mesin: 2,45x1,8x2,5 m - Lemari listrik - Sistem pendingin - Konveyor serpihan merk META (Tinggi angkut 1500mm; Lebar 200mm) Fungsi pergantian meja tidak beroperasi.

Kondisi: bekas, Tahun pembuatan: 1987, en-GB: Technical Details: Swing diameter over bed: 180 mm Nlodpeu Ix N Sefx Aa Uob Turning length: 490 mm Max. workpiece diameter: 450 mm Cross travel (Z-axis): 168 mm Control: Traub TX8D Spindle speed: 20 - 4000 rpm Spindle bore: Ø 60 mm Operating hours (power-on): 23,495 h Tool turret: 12 stations Total power requirement: 38 kW Machine weight approx.: 4.2 t Machine dimensions approx. LxWxH: 3.6 x 2.5 x 2.2 m Tool holder: cylindrical shaft DIN 69880 (VDI 3425) Ø 40x63 Röhm lathe chuck Ø 200 mm, hydraulic clamping Operation via double foot switch and control panel/operator desk Coolant system The TRAUB features an integrated chip conveyor with an ejection height of 1,100 mm (currently not functional). Accessories: various small parts 8 machine feet (various) without tailstock as is.

Kondisi: baik (bekas), Tahun pembuatan: 1996, CNC turning center TRAUB Type: TNC65 DG, Year of manufacture: 1996, Control: TRAUB TX8F Njdpou Eug Ijfx Aa Uslb Comes with extensive accessories.

Kondisi: Pembawa suku cadang rusak (bekas), Tahun pembuatan: 1987, Fungsionalitas: belum diuji, nomor mesin/kendaraan: 652, lebar total: 1.250 mm, panjang total: 2.050 mm, tinggi total: 1.450 mm, TRAUB TB single-spindle automatic lathe – defective / for spare parts For sale: used single-spindle automatic lathe TRAUB type TB. The machine is being sold explicitly as defective or untested. Sale exclusively as a project for hobbyists, a source of spare parts, or for refurbishment. The machine was taken out of service for safety and age reasons. No guarantee concerning function, accuracy, or occupational safety. TRAUB automatic lathes are robust mechanical production machines designed for series production and automatic turned parts, known for their solid cast construction and durable mechanics. Technical data Manufacturer: TRAUB Type: TB Machine type: Single-spindle automatic lathe Control: Mechanical / cam-controlled Field of application: Series production of turned parts Nljdpfx Aaey Uq Sto Uob Material feeding via bar stock Multiple tool slides Coolant system available Three-phase power connection Compressed air required depending on configuration Condition Used Sold explicitly as defective Untested condition Ideal as a spare parts donor or restoration project No warranty No returns On-site inspection expressly recommended Loading and transport by buyer Note Year of manufacture, exact configuration, and accessories according to photos or nameplate. Sale is made excluding any liability for material defects.

Tahun pembuatan: 1993, Kondisi: bekas, nomor mesin/kendaraan: 156, Kontrol CNC Traub Sistem TX8 F, dengan 1 revolver dengan 6 posisi alat dan 1 revolver lagi dengan 6 posisi alat, alat bertenaga, kapasitas batang 30 mm, dilengkapi dengan unit penyaring kain non-woven, sistem pendingin, dan majalah pemuatan batang otomatis. Nledpfx Aaey Sqkwo Ueb

Kondisi: bekas, Tahun pembuatan: 2004, nomor mesin/kendaraan: 1057, Kontrol CNC TRAUB Sistem TX 8 H, diameter batang lewat 42 mm, panjang putar maksimum 450 mm, kecepatan putar maksimum 8000 rpm, 2 revolver masing-masing dengan 10 posisi alat, alat bertenaga, sistem filter sabuk KNOLL RP, konveyor serpihan. Nlsdpjy Sqhiefx Aa Ueb

Kondisi: bekas, Tahun pembuatan: 2008, nomor mesin/kendaraan: 7041245, CNC kontrol Traub Sistem TX8 I, diameter batang 42 mm, panjang pembubutan maks. 450 mm, kecepatan putar maks. 8000 rpm, 2 revolver masing-masing dengan 10 posisi alat, alat yang digerakkan, perangkat pendingin, konveyor serbuk KNOLL 240 S-1/50, sistem filtrasi/filter sabuk kompak RESY Njdpey Sqg Eofx Aa Uslb

Kondisi: bekas, Tahun pembuatan: 2007, nomor mesin/kendaraan: 7041219, Kontrol CNC Traub System TX8 I, diameter batang 42 mm, panjang pengerjaan maksimal 450 mm, kecepatan putar maksimum 8000 rpm, 2 revolver masing-masing dengan 10 posisi alat, alat penggerak, konveyor serbuk KNOLL 240 S-1/50, sistem filtrasi/compact band filter RESY KBF 452/500 Nlsdsy Sqg Sspfx Aa Ueb

Kondisi: bekas, Tahun pembuatan: 1992, nomor mesin/kendaraan: 690, Sistem kontrol CNC Traub TX8 D, dengan 1 revolver dengan 14 posisi alat dan 1 revolver dengan 9 posisi alat, alat bertenaga, panjang putar maks. sekitar 1000 mm, diameter lewat batang 80 mm, daya 73 KW, dengan sistem filter nonwoven dan konveyor serpihan. Nlodpoy Sqimefx Aa Ujb

Kondisi: bekas, Tahun pembuatan: 2007, nomor mesin/kendaraan: 7041201, Kontrol CNC Traub Sistem TX8 I, diameter batang 42 mm, panjang pembubutan maksimum 450 mm, kecepatan putar maksimum 8000 rpm, 2 revolver masing-masing dengan 10 slot alat, alat berpenggerak, konveyor serpihan KNOLL 240 S-1/50, sistem filtrasi/filter belt kompak RESY KBF 452 Nedpfx Aaey Sqhcj Uelb

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2009, jam operasional: 87.094 h, kecepatan spindel (maks.): 4.000 rpm, jarak pergerakan sumbu X: 140 mm, jarak gerak sumbu Z: 450 mm, daya motor spindle: 18.500 W, tinggi total: 1.917 mm, lebar total: 2.076 mm, berat keseluruhan: 5.200 kg, produsen pengendali: TRAUB, model controller: TX8i, panjang produk (maks.): 4.354 mm, jumlah slot dalam magazin alat: 10, jumlah sumbu: 7, TRAUB TNC 65 DG 7-sumbu ini diproduksi pada tahun 2009. Mesin ini dilengkapi revolver alat berdaya tinggi dengan kecepatan putar hingga 4000 rpm dan sistem pendingin tekanan tinggi dengan tingkat tekanan yang dapat diprogram. Mesin ini dirancang untuk pekerjaan pemesinan logam dan plastik, serta dilengkapi sumbu C untuk proses pembubutan dan pemposisian yang dikendalikan secara numerik. Jika Anda mencari mesin bubut berkualitas tinggi, pertimbangkan mesin bubut horizontal TRAUB TNC 65 DG yang kami tawarkan untuk dijual. Silakan hubungi kami untuk informasi lebih lanjut. Nedpfoy Sg Nijx Aa Uelb

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2000, jam operasional: 116.688 h, kecepatan spindel (maks.): 5.600 rpm, jarak pergerakan sumbu X: 375 mm, jarak gerak sumbu Z: 450 mm, daya motor spindle: 11.000 W, tinggi total: 1.800 mm, berat keseluruhan: 3.500 kg, produsen pengendali: TRAUB, model controller: TX8H, panjang produk (maks.): 2.700 mm, jumlah sumbu: 3, This 3-axis horizontal lathe TRAUB TNA 300 was manufactured in the year 2000. It features a spindle bore of 65 mm and is equipped with a high-pressure coolant system, driven tools with 4 kW power output, and an automatic bar change system. The machine includes a chip conveyor and tool monitoring systems to increase operational efficiency. If you are looking for a high-quality lathe, you should consider the TRAUB TNA 300 we have available for sale. Please contact us for further details. • Spindle bore/machine capacity: 65 mm • Capacity of the installed 185E collet system: max. 60 mm clamping diameter • Machine configuration: without tailstock • Basic equipment: included • Hydraulic hollow clamping cylinder: included • High-pressure coolant system: 12 bar / 3 bar • Control: TX8H, 32-bit technology; processor of the latest generation (at the time of manufacture); parameter data on disk • Axes/functions: Njdpfxoy Sg Dge Aa Uelb • C-axis: included (NC spindle orientation and rotational axis) • Y-axis: not included • Driven tools: included; power output 4 kW • Monitoring and safety: • Tool breakage monitoring: included • Tool wear monitoring: included • Automatic drive shutdown at material end: selectable via parameter • Error message via parameter: selectable • Guideway cover: included • Workpiece clamping: • Collet system: ROHM • Collet system compatibility: • DIN 6343 Size 48, max. diameter 42 mm • Rubberflex Series 52 compatible • Rubberflex Series 36 compatible • Fahrion collet FM 1149 MB compatible • Fahrion collet FM 1148 MB compatible • Electrical: • Electrical system per: VDE / EN 60204 • Operating voltage: 400 V / 50 Hz • Accessory voltage: 230 V / 50 Hz • Control voltage: 24 V DC • Multi-voltage transformer: 460 / 400 / 380 / 220 / 200 V • EMC: • Compliance: Industrial class A • Standards: EN 50081 / EN 50082 / EN 55011 / EN 55022 • Machine standards: DIN EN 292; DIN EN 294; DIN EN 418; DIN EN 60204-1 • Pneumatic system: Mannesmann Rexroth ISO Additional Equipment • Chip conveyor: included • Workpiece extraction device: included; via conveyor, left side ejection • Loader preparation: included • Bar feeder magazine: TRAUB DNH 61-3000 (automatic) • Feed: telescopic pusher system • Bar shapes: Round / Hexagonal / Square • Maximum bar length: 3200 mm • Maximum bar diameter (long bars): 63 mm • Maximum bar diameter (short pieces): 65 mm • Automatic bar change: included • Remnant removal: forward • Central bar diameter adjustment: included • Steplessly adjustable feed force: included • Central magazine adjustment: included • No guide channel change required • No collet change required • Short remnants possible • Cross loading system • Transport weight: approx. 2100 kg Technical Specification Counter Spindle: No Driven Tools: Yes

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1999, jam operasional: 124.009 h, jumlah sumbu: 5, This 5-axis TRAUB TNC65 DG was manufactured in 1999. It features a robust control system with TRAUB TX8H technology, two tool turrets with 10 stations each, and a maximum clamping diameter of 60 mm. The machine is equipped with a coolant filtration system and a hinged belt chip conveyor for efficient chip evacuation. If you are looking for a high-quality turning machine, consider the TRAUB TNC65 DG horizontal lathe we have for sale. Contact us for further details. • Control system: TRAUB TX8H (32-bit technology) • Main spindle: Yes • Sub spindle: Yes • Spindle synchronization: Yes • Main spindle C-axis: Yes • Sub spindle C-axis: Yes • V-axis: Yes (programmable position) • Tool turrets: 2 (Turret I and II) • Driven tools on turret I: Yes • Driven tools on turret II: Yes • Number of tool stations: 10 per turret • Thread cutting: Without compensating chuck • Drilling and milling units: X-direction (i=1 and i=3) and Z-direction (i=1 and i=3) • Coolant system: Filtration system with cyclone filter • Coolant tank capacity: approx. 470 liters • Coolant pump: Supply for both turrets integrated • Hydraulic system: Yes • Operating voltage: 400 V / 50 Hz • Control voltage: 24 V DC Nodpsy R Uvuofx Aa Uelb • Accessories voltage: 230 V / 50 Hz • Multi-tap transformer: 460 V / 400 V / 380 V / 220 V / 200 V • Standards: EC Machinery Directive, EMC Directive, Low Voltage Directive, DIN EN 292, DIN EN 294, DIN EN 418, DIN EN 60204 • Tool monitoring: Tool breakage and wear monitoring • Programming software: TRAUB Polyform • Coolant type: Compatible with water-based coolant Additional Equipment • Chip conveyor: Hinged belt type • Bar loader: TRAUB DNH 61-3000 (including preparation) • Workpiece ejector: Yes • Workpiece extraction device: Yes, with gripper • Collet system: Röhm, max. clamping diameter 60 mm Technical Specification Counter spindle: Yes Driven tools: Yes

Tahun pembuatan: 1995, Kondisi: siap digunakan (bekas), de-001 Nlodpfx Ajy Tx Rzsa Usb

Kondisi: baik (bekas), Tahun pembuatan: 2009, Fungsionalitas: berfungsi sepenuhnya, CNC Swiss-Type Lathe Manufacturer: Traub Model: TNL 12 Control: Traub Year of manufacture: 2009 TECHNICAL DATA Headstock - Max. bar diameter (mm): 12.7 - Quality of bar material (DIN 671) (mm): Ø Xh9 - Max. spindle speed (rpm): 12,000 Max. turning length / headstock stroke - With fixed guide bush (mm): 130 - With rotating guide bush (mm): 80 - With programmable guide bush (mm): 80 C-axis resolution (degrees): 0.001 Rapid traverse Z1 (m/min): 30 Tool Carrier 1 - Travel X1 (mm): 35 - Travel Y1 (mm): 38 (-10 +28) - Rapid traverse X1 / Y1 (m/min): 15 - Chip-to-chip time (s): 0.3 Tool Carrier 2 - Travel X2 (mm): 35 - Travel Z2 (mm): 50 - Rapid traverse X2/Z2 (m/min): 15 - Chip-to-chip time (s): 0.3 Driven Tool for Tool Carrier 1 and 2 - Max. speed (rpm): 8,000 Nlodsy N A S Uspfx Aa Ueb - Max. tools (quantity): 2xG - Clamping diameter for drilling tools (mm): 0.5–7 Subspindle / Front Attachment - Max. bar diameter (mm): 12.7 - Max. longitudinal stroke 23, 24 / Xg (mm): 140 | 228 - Rapid traverse 23,24/X3 (m/min): 30 - Tool stations (quantity): 4 - Max. speed (rpm): 12,000 - C-axis resolution (degrees): 0.001 Rear Tool Device, Dragged / Stationary - Z-stroke dragged with working spindle (mm): 80 - Tool holder diameter (mm): 20 - Tool stations (quantity): 3 Rear Tool Device (X4 Axis) - X4 stroke (mm): 39 - Rapid traverse (m/min): 15 - Tool holder diameter (mm): 28 - Tool stations (quantity): 4 Driven Tool Unit for Rear Device (with X4 Axis) - Max. speed (rpm): 10,000 - Driven tool stations (quantity): 4 - Clamping diameter for drilling tools - Driven (mm): 0.5–7 - Non-driven (mm): 0.5–10 Coolant System - Pump pressure, single stage (bar): 3 - Tank capacity (l): 180 - Delivery rate (l/min): 40 FEATURES - Chip conveyor - Bar feeder FMB Minimag 18 - High-pressure coolant system - Fire extinguishing system Subject to technical changes and errors.

Kondisi: baik (bekas), Tahun pembuatan: 2007, Fungsionalitas: berfungsi sepenuhnya, CNC Swiss-Type Lathe Manufacturer: Traub Machine Model: TNL 12 Control: Traub Year of Manufacture: 2007 TECHNICAL DATA Headstock - Max. bar diameter (mm): 12.7 - Quality of round material (DIN 671) (mm): Ø Xh9 - Max. spindle speed (rpm): 12,000 Max. turning length / headstock stroke - with fixed guide bushing (mm): 130 - with rotating guide bushing (mm): 80 - with programmable guide bushing (mm): 80 C-axis resolution (degrees): 0.001 Rapid traverse Z1 (m/min): 30 Tool Carrier 1 - X1-axis travel (mm): 35 - Y1-axis travel (mm): 38 (-10 +28) - Rapid traverse X1 / Y1 (m/min): 15 - Chip-to-chip time (s): 0.3 Tool Carrier 2 - X2-axis travel (mm): 35 - Z2-axis travel (mm): 50 - Rapid traverse X2/Z2 (m/min): 15 - Chip-to-chip time (s): 0.3 Driven Tool for Tool Carrier 1 and 2 - Max. speed (rpm): 8,000 - Max. tools (qty): 2xG - Clamping diameter for boring tools (mm): 0.5–7 Sub-Spindle / Front Attachment Njdsy N A Atepfx Aa Uelb - Max. bar diameter (mm): 12.7 - Max. longitudinal stroke 23, 24 / Xg (mm): 140 | 228 - Rapid traverse 23,24/X3 (m/min): 30 - Tool positions (qty): 4 - Max. speed (rpm): 12,000 - C-axis resolution (degrees): 0.001 Backworking Attachment, Synchronized / Fixed - Z-axis stroke, synchronized with working spindle (mm): 80 - Tool holder diameter (mm): 20 - Tool positions (qty): 3 Backworking Attachment (X4-Axis) - X4-axis stroke (mm): 39 - Rapid traverse speed (m/min): 15 - Tool holder diameter (mm): 28 - Tool positions (qty): 4 Driven Tool for Backworking Attachment (with X4-Axis) - Max. speed (rpm): 10,000 - Max. driven tools (qty): 4 - Clamping diameter for boring tools - driven (mm): 0.5–7 - non-driven (mm): 0.5–10 Coolant System - Single-stage pump pressure (bar): 3 - Tank capacity (l): 180 - Delivery rate (l/min): 40 FEATURES - Chip conveyor - FMB Minimag 18 bar feeder - High-pressure system - Fire extinguishing system Subject to changes and errors in technical specifications and details.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2009, jam operasional: 100 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: SKU 102781, berat keseluruhan: 1.300 kg, daya: 4 kW (5,44 hp), lebar yang dibutuhkan: 1.350 mm, persyaratan ruang panjang: 1.520 mm, kebutuhan tinggi: 1.400 mm, Perlengkapan: kecepatan rotasi dapat diubah tanpa batas, Desain khusus Multi Grind memungkinkan fungsi penggerindaan bulat, datar, dan alat digabungkan dalam satu mesin. Pada penggerindaan bulat luar, benda kerja dapat diproses dengan penjepitan satu sisi atau didukung di antara dua center pada kepala lepas yang stabil. Unit penggerindaan dalam juga dapat dipasang pada kepala utama, dan pekerjaan penggerindaan datar ringan pun dapat dilakukan dengan model ini. Dalam fungsi mesin gerinda alat, Multi Grind memungkinkan pemrosesan presisi pada mata potong berbagai alat – sehingga sangat serbaguna dalam penggunaannya. Gerinda bulat luar dan dalam Njdpfx Aaexqgi Ds Ujlb Gerinda datar Gerinda alat Meja hidrolik dengan pengumpan otomatis Aksesori lengkap

Kondisi: bekas, Tahun pembuatan: 2022, EN Nedsy Nfdtopfx Aa Uelb

Kondisi: baik (bekas), Tahun pembuatan: 2009, Fungsionalitas: berfungsi sepenuhnya, CNC Lathe TRAUB TNX 65/42 Year of manufacture: 2009 Control: Traub TX 8i-s TECHNICAL DATA - Number of spindles: 2 - Number of axes: 12 - Number of turret heads: 2 MAIN SPINDLE - Spindle nose: A2-6 - Spindle drive power: 24 kW - Spindle speed: 5,000 rpm - Max. bar diameter: 65 mm - Max. main spindle chuck diameter: 175 mm - Minimum C-axis resolution: 0.001° SUB-SPINDLE - Spindle nose: A2-5 - Spindle drive power: 28 kW - Spindle speed: 7,000 rpm - Max. bar diameter: 42 mm - Minimum C-axis resolution: 0.001° - Travel: 700 mm LEFT UPPER TURRET - Number of positions: 10 - Number of live (driven) positions: 10 - Travel X/Z: 175 / 650 mm - Travel Y: +/- 40 mm - Tool type: VDI 30 - Live tool speed: 6,000 rpm - Live tool power: 5.5 kW RIGHT LOWER TURRET - Number of positions: 10 - Number of live (driven) positions: 10 - Travel X/Z: 175 / 650 mm - Travel Y: +/- 40 mm Nledpeyw H Szsfx Aa Ujb - Tool type: VDI 30 - Live tool speed: 6,000 rpm - Live tool power: 5.5 kW ELECTRICAL SUPPLY - Supply voltage: 400 V - Total power rating: 95 kW WEIGHT AND DIMENSIONS - Required floor space: 5,450 x 2,318 mm - Machine height: 2,258 mm - Machine weight: 10,000 kg New spindle installed as of 04/26 ACCESSORIES - 3-color status signal lamp - Coolant tank: RESY * with high pressure pump * with paper filter - Chip conveyor - Parts catcher - Parts belt conveyor

Kondisi: baik (bekas), Tahun pembuatan: 2002, TRAUB TNL 12/7 CNC Sliding Headstock Automatic Lathe TECHNICAL DATA Bar capacity: 12 mm Main spindle stroke: 130 / 80 mm Spindle power: 4 kW Main spindle speed: 12,000 rpm Upper turret: 6 positions Lower turret: 6 positions Number of driven tools, turret: 6 Max diameter, sub spindle: 12 mm Sub spindle speed: 12,000 rpm Dimensions: 2850 x 1100 x 1480 mm Nlsdpfx Aet E Dbysa Ujb SCOPE OF SUPPLY Including (list not exhaustive): - Traub TNL 12/7 CNC Lathe - Meyrat high-frequency spindles, 2 pieces - Tool holders (driven and static) - FMB Minimag 3200 C bar feeder - Hydraulic unit - High-pressure pump - Chip conveyor Exact scope of delivery as per photo documentation No guarantee is given for the accuracy, completeness, or timeliness of the information provided.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2013, Traub TNL 18-7B CNC Turning Automatic Base Machine: Dimensions: 2441 x 1396 mm Weight: 3800 kg Spindle Height Above Floor: 3800 mm Connected Load: 24 kW Main Spindle Max. Bar Capacity: 18 mm Max. Speed: 12,000 rpm Corner Speed: 5,000 rpm Travel Z: 205 mm Rapid Traverse: 40 m/min Positioning Accuracy Z: 0.001 mm Feed Force: 3000 N Spindle Nose / Short Taper: Traub short taper mount Max. Clamping Force: 1400 daN Max. Clamping Pressure: 40 bar Min. Clamping Pressure: 7.5 bar Piston Area: 40 cm² Total Cylinder Stroke: 5 mm Clamping Tube Thread: M25 x 1 Counter Spindle Workpiece Diameter: 21 mm Clamping Depth (Workpiece): 180 mm Max. Speed: 12,000 rpm Strokes: X: 120 mm | Y: -20/+40 mm | Z: 250 mm Nodpfx Aaowg Taks Ujlb Rapid Traverse: X: 20 m/min | Y: 20 m/min | Z: 40 m/min Max. Clamping Pressure: 30 bar Min. Clamping Pressure: 10 bar Upper Tool Turret with B-Axis Number of Stations: 8 Shank Cross-section (Turning Tool): 16 x 16 mm Travel: X: 120 mm | Y: -25/+40 mm | Z: 250 mm Rapid Traverse: X: 20 m/min | Y: 20 m/min | Z: 40 m/min Tool-to-Tool Time: 0.5 sec Positioning Accuracy: X: 0.0005 mm | Y: 0.0005 mm | Z: 0.001 mm Lower Tool Turret Number of Stations: 7 + counter spindle Shank Cross-section (Turning Tool): 16 x 16 mm Travel: X: 120 mm | Y: -20/+40 mm | Z: 250 mm Rapid Traverse: X: 20 m/min | Y: 20 m/min | Z: 40 m/min Tool-to-Tool Time: 0.5 sec Positioning Accuracy: X: 0.0005 mm | Y: 0.0005 mm | Z: 0.001 mm Driven Tool System for Upper Tool Turret Number of Driven Stations: max. 8 Drive Power: 2 kW Max. Speed: 12,000 rpm Torque: 3.9 Nm Driven Tool System for Lower Tool Turret Number of Driven Stations: 7 + counter spindle Drive Power: 3.4 kW Max. Speed: 12,000 rpm Torque: 7.3 Nm Driven Tool System for Rear Unit Number of Stations: 7 Number of Powered Stations: max. 3 Pitch: 46 mm Drive Power: 2 kW Max. Speed: 7,500 rpm Torque: 4.7 Nm Drive Power: 2 kW Max. Speed: 4,000 rpm Torque: 11.8 Nm SCOPE OF SUPPLY Includes (not limited to): - Traub CNC Lathe - Tool holders, driven and static - High-pressure and band filtration system - Oil mist separator - Fire extinguishing system - Chip conveyor - Bar feeder - Operating documentation Exact scope of supply as per photo series. No guarantee for the accuracy, completeness or currency of the information provided.

Kondisi: sangat baik (bekas), Tahun pembuatan: 1990, Fungsionalitas: berfungsi sepenuhnya, 1 x mesin bubut otomatis Traub A 25 dengan magazine pemuatan Iemca AS 325/32. Mesin dapat dilihat dalam kondisi teraliri listrik atau video dapat dikirimkan. Nlodpfx Aaey R Nwyo Ueb