Beli Trumpf Laser Berkinerja Tinggi bekas (14.428)

Kondisi: bekas, TRUMPF TruDisk 4002 (4 C) high-power solid-state disk laser, up to 4 kW Model: TruDisk 4002 (4 C) The TruDisk 4002 is a powerful, energy-efficient, and modular laser solution—ideal for industrial manufacturing environments with high demands for quality, precision, and automation. Its combination of high output, excellent beam quality, and smart factory features makes it a particularly attractive choice for modern production lines. Machine Type: TruDisk 4002 (4C) Manufacturer: TRUMPF Laser GmbH + Co. KG Year of Manufacture: May 2012 Drawing Number: 20-10-02-A3* No further in-house inspection was carried out. Operating hours could not be accessed. The laser operated flawlessly until decommissioning. Technical specifications: - Output & Wavelength: 80–4000 W at 1030 nm - Beam quality (BPP): typically 2 mm·mrad (up to 25 mm·mrad, depending on configuration) - Modular & compact: footprint < 1 m², modular design simplifies maintenance/service - Efficient energy & cooling systems: - Energy-saving modes, active power factor correction, pulse function for reduced consumption - Flexible cooling: integrated heat exchanger (5–28°C), optionally with compressor (inlet temperature up to 38°C) - Reflection-resistant: special resonator design also suitable for highly reflective metals - Industry 4.0-enabled: comprehensive sensors & data interfaces for condition monitoring, OPC UA, predictive maintenance Applications: - Scanner and hybrid welding (e.g. automotive bodywork, shipbuilding) - High-speed cutting, including reflective metals Bwedpfx Aszii Nqepcop - Flame cutting & surface processing - Cladding, hardening, deep penetration welding with high precision requirements Technical Data: - Supply voltage: 380 V (-10%) to 460 V (+10%), 3AC + PE - Frequency: 50–60 Hz - Power consumption: 23 kW / 25 kVA - Rated current: 34 A at 400 V - Degree of protection: IP 54 - Short-circuit withstand capacity: Icn / SCCR 50 kA - Weight: 850 kg Condition: used Scope of delivery: (see picture) (Subject to changes and errors in the technical data; information is without guarantee!) For further questions, please contact us by phone.

Kondisi: bekas, Trumpf TRUMPF TruDisk 6602 (4 C) High-Power Disk Laser with up to 6.6 kW Type: TruDisk 6602 (4 C) The TRUMPF TruDisk 6602 (4C) is a high-performance disk laser offering continuous output of approximately 6.6 kW – perfectly suited for welding, cutting, and surface processing of metals like steel, aluminum, copper, and more. Machine Type: TruDisk 6602 (4 C) Manufacturer: TRUMPF Laser GmbH + Co. KG Year of manufacture: November 2012 Drawing number: 20-10-02-A5 No additional inspection was conducted in-house. Operating hours could not be read out. The laser was operating flawlessly up until decommission. Key Technical Features: - Power output: Continuously adjustable from 80 W up to 6600 W, max. 6.6 kW for machine tools - Beam quality: < 2 mm·mrad for excellent focus control - Wavelength: 1030 nm (infrared), adaptable to green wavelength in special models - Beam sharing: Up to 4 laser outputs (4C), enabling the simultaneous supply of multiple processing cells - Cooling system: Integrated heat exchanger (up to 28 °C inlet temperature), optional compressor cooling (up to 38 °C) - Modular and service-friendly: Compact design (< 1 m² footprint), modular components for rapid servicing Benefits & Applications: - Maximum process stability: Real-time power regulation ensures reproducible results - Reflection resistance: Patented resonator design enables welding of reflective metals such as copper and aluminum - Industry 4.0 ready: Onboard sensor monitoring system, OPC-UA interface for condition monitoring & predictive maintenance - Energy efficiency: Up to 50% less power consumption thanks to intelligent pulse control and energy-saving modes - Versatility: Application areas range from welding (including BrightLine for virtually spatter-free results) and cutting, to hardening, cast processing, additive manufacturing, laser wire cladding, and more. Typical Use Cases: Ideally suited for industrial high-power laser applications: Application | Features -----|----- Production of automotive body parts | Deep penetration welding with high repeatability Copper welding | Especially suited with green wavelength (>95% spatter reduction) Remote hybrid welding | Fast processing of large areas with robust beam quality Additive manufacturing & hardening | Suitable due to beam quality & compact design Main Technical Data: Property | Value -----|----- Bwodpfx Apjzii D Iscjp Laser power | up to 6,600 W (6.6 kW), continuously variable Beam quality |

Kondisi: bekas, en-Trumpf-TruDisk-4002-6C-High-Power-Solid-State-Disc-Laser-up-t o-4kW-The-Trumpf-TruDisk-4002-6C-is-a-state-of-the-art-efficient- and-rugged-disc-laser-optimized-for-demanding-industrial-metal-pr ocessing-Type-TruDisk-4002-6C-Manufacturer-TRUMPF-Laser-GmbH-Co-K G-Year-of-manufacture-March-2016-Drawing-number-20-10-03-A204-No- further-testing-has-been-carried-out-on-site-Operating-hours-coul d-not-be-read-The-laser-was-in-perfect-working-order-until-the-en d-Features-Top-performance-up-to-4kW-Excellent-beam-quality-Relia bility-reflection-safety-Energy-efficient-modular-architecture-Id eal-for-a-wide-range-of-applications-in-automotive-engineering-me chanical-engineering-or-surface-treatment-Technical-highlights-Po wer-from-80W-to-max-4000W-continuous-operation-CW-Wavelength-appr ox-1030nm-infrared-YbYAG-Beam-quality-up-to-2-mmmrad-excellent-qu ality-typically-range-2-25-mmmrad-Output-options-Modular-design-- -up-to-4-outputs-possible-depending-on-series-Optional-cooling-Wa ter-cooled-e.g-via-KLH-chiller-or-integrated-heat-exchangercompre ssor-Modular-construction-Robust-optical-design-efficient-operati on-power-factor-correction-energy-saving-modes-PROFIenergy-connec tion-Typical-applications-Laser-welding-incl-hybrid-or-scanner-co ntrolled-e-g-body-or-gearbox-High-precision-metal-cuttingflame-cu tting-Surface-treatment-coating-application-etc---professional-in dustrial-use-Power-supply-380V--10--to-460V-10-3AC--PE-Frequency- 50-60Hz-Power-consumption-22kW-23kVA-Nominal-current-325A-at-400V -Protection-class-IP54-Short-circuit-strength-IcnSCCR-50kA-Weight -850kg-Condition-used-Scope-of-delivery-see-pictures-Subject-to-t echnical-changes-and-errors-For-further-questions-please-contact- us-by-phone. Bwedjwzabqepfx Apcep

Kondisi: bekas, en-001 Bwsdpewzaiuofx Apcjp

Kondisi: bekas, Fungsionalitas: belum diuji, Tahun pembuatan: 2003, tegangan masuk: 400 V, jenis arus masuk: tiga fasa, Perlengkapan: Pelat tipe tersedia, dokumentasi / manual, trumpf-hl204p4-lcu-2003-de Bedpfx Apoxxbnkecewp

Kondisi: siap digunakan (bekas), TRUMPF 200 MQ VIS optik pemfokusan + Haas - Laser NBB 22-30-20-00 SN:9061842, bekas, tanda pemakaian normal, berfungsi 100%, pengiriman sesuai foto. Bwedpfjx Eu Uyjx Apcjp

Kondisi: siap digunakan (bekas), TRUMPF Laser 17x E11V 060050840, bekas, kondisi terawat baik, 100% berfungsi, pengiriman sesuai foto. Bedpfxsy Ntb He Apcswp

Kondisi: baik (bekas), Tahun pembuatan: 2007, X working area 4000 mm, Y 2000 mm, Z 115 mm Weight 16,000 kg Dimensions (L x W x H): approx. 9800 mm x 5300 mm x 2000 mm CNC Control: Siemens Sinumerik 840 D Laser Type: TruFlow 4000 W Bsdovtm Szjpfx Apcewp Max. sheet thickness: 20 mm Feed: 4000 mm x 1250 mm Traverse path: 3400 mm Dismantling, loading, and crane services are not included in the machine price – additional charges apply for all services. NC: 88631 - Resonator/HD Pump 1: 87603 - Beam ON / Pump 2: 53667 Technical Parameters: - Model: KNC/H 1500/65 - Maximum temperature: 650°C - Recommended operating temperature range: 300°C to 600°C - External dimensions (W x H x D): approx. 2800 x 3200 x 2100 mm * Height including door design with hydraulic opening - Internal dimensions (W x H x D): 1500 x 1000 x 1000 mm - Number of heating zones: 1 - Maximum batch weight: 1000 kg - Heating power: 48 kW - Furnace weight: approx. 1300 kg - Voltage: 3/PEN 400/230 V AC 50 Hz - The flap is part of the furnace, serves for automatic temperature control, and is operated via the controller program. - Including technical documentation in Slovak - Protocol for measurement and optimization of temperature uniformity according to DIN 17052-1 ΔT10°C in the internal working chamber (in empty furnace at Tmax) - Technical documentation is in Slovak. Manufacturer: LAC, s.r.o., Czech Republic Year of manufacture: 2021 This is an electric furnace, whose heating system consists of resistance heating elements located near the fan unit. The fan ensures the circulation of the atmosphere in the heating chamber via the heating branches, thus warming the working atmosphere and the load in the furnace. The furnace working chamber is equipped with a separately regulated heating unit in the rear wall. The furnace is fitted with a radial circulation fan with a horizontal shaft to ensure uniform temperature distribution throughout the entire work space. The circulation fan drives heated air through the circulation ducts in the recirculation insert. All rotating parts are protected against accidental contact. The temperature profile of the unit is controlled by a programmable PID industrial controller. This controller allows for the creation of up to 30 heat treatment programs, based on processing technology requirements and material batch specifications. Dimensions: see attachment.

Kondisi: baik (bekas), Tahun pembuatan: 2013, 1 laser system with 1 loading station, each with 2 nests - Up to 4 welding fixtures - Laser power: 3.3 kW - Beam source: Trumpf Trudisk 3302 disk laser - System manufacturer: Sitec - Operating hours: approx. 70,000 h - Max. workpiece dimensions: approx. 300 x 100 x 100 mm - Larger workpieces possible - Beam delivery via fiber optic cable (LLK) - Laser welding with Trumpf welding optics BEO D 70 on a multi-axis system - Inline laser monitoring system for weld seam inspection - Welding speeds: up to 5600 mm/min - Penetration depth: 1.5 mm - Welding with shielding gas possible! Suited for aluminum or stainless steel - Fixtures can be water-cooled! - 2 rotary axes per table side, individually programmable PROGRAMMING: 4 cylinder clamping circuits per tool 10 inputs via slip ring rotary distributor 8 additional inputs via wireless system per tool Inputs freely parameterizable via user interface (end position / part inspection / setup validation) Clamping/release programs and part queries fully programmable via NC program No PLC programming required System fully programmable via Siemens controller (G-code) Laser programmed via Trumpf TruControl and triggered via Siemens controller (G-code) Reference outputs: T1: 2 weld seams (each L=100 mm, penetration depth=1.5 mm) 2 workpieces per table side Bedpfxjwm I H Sj Apcswp approx. 250 pieces/hour T2: 17 weld seams (each L=10 mm, penetration depth=1.2 mm) 2 workpieces per table side approx. 190 pieces/hour The system can be inspected under power!

Kondisi: bekas, Dionex / ThermoFisher FLM: Temperature range: 5–70 °C (max. 15 °C below ambient temperature) Temperature accuracy: ±0.5 °C Temperature stability: ±0.1 °C Temperature precision: ±0.1 °C Column capacity: Up to 3 columns, max. 30 cm length Heating time: From 20 to 50 °C in less than 25 min (at 23 °C ambient temperature, ±0.5 °C) Cooling time: From 50 to 20 °C in less than 35 min (at 23 °C ambient temperature, ±0.5 °C) Control: All functions software-controlled via USB 1.1 I/O interfaces: 2 digital inputs, 2 programmable relay outputs Column identification: Electronic identification system for 3 columns Switching valves: 1 or 2 thermostated microvalves with low dispersion (10 ports or 6 ports) Flow splitter: Nano-, capillary- or thermostated micro-flow splitter with flow splitter identification system Flow control: Electronically controlled and actively balanced flow splitter, independent of solvent composition and back pressure Column flow rate range: 50 nL/min to 2.5 mL/min using a predefined splitter and active flow control Flow rate selection range: 50 nL/min to 1000 nL/min (using a nano-LC splitter) 0.5 μL/min to 10 μL/min (with a capillary LC splitter) 10 μL/min to 160 μL/min (with a micro-LC splitter) Bwjdpfozikcxsx Apcop Gradient delay time: Typically < 1.5 min at 200 nL/min to splitter output Max. column pressure: 35 MPa (4900 psi) Wetted parts: Fused silica, stainless steel (1.4571, 316L), PEEK; Waste line: PTFE, aluminium oxide (Al2O3) Safety features: Moisture sensor, gas sensor, and leak detector for the flow control valve VWD Optical design: Dual-beam photometer (monochromator) Multi-wavelength UV/VIS detector Light source: VWD-3400RS: Deuterium lamp and tungsten lamp Temperature control for both lamps Wavelength range: 190 to 900 nm Tungsten lamp recommended for wavelengths > 600 nm. Noise: At one wavelength:

Kondisi: baik (bekas), 3D Systems Model: ProX™ 800 ProX™ 800 3D Production Printer by 3D Systems – High-Performance SLA Printer Machine has been regularly serviced Operating hours: 18,700 (as of 18/04/2023) Has not been operated since 18/04/2023 Note: Annual maintenance performed up to dismantling For sale is a used ProX 800 Stereolithography (SLA) production printer by 3D Systems. This large-format SLA system features state-of-the-art printhead technology and is suitable for high-precision components and industrial applications (e.g., automotive, aerospace, medical technology). Additional equipment: Automatic material refill system and preassembled material supply module (rapid module change, uninterrupted operation) 3D-Manage™ software for CAD model and print job management Touchscreen operation on the device (Print3D Pro™) Status/indicator light module, central user guidance Comprehensive safety system including laser safety monitoring (Class I), emergency stop switches, and safety interlocks Bwodszii Umspfx Apcjp Detailed maintenance and error diagnostic functions Material container (MDM) Technical data: Printing technology: Stereolithography (SLA) with frequency-tripled Nd:YVO4 solid-state UV laser (355 nm, max. 3 W) Maximum build volume: approx. 650 × 750 × 550 mm Dimensions (L × W × H): approx. 1370 × 1600 × 2260 mm Weight: approx. 907 kg Resolution: up to 0.00127 mm (laser spot size), 4000 DPI Accuracy: ± 0.025–0.05 mm per inch Materials: wide range of Accura resins (robust, transparent, high-temperature resistant, biocompatible, etc.) Electrical connection: Power supply: 200–240 V AC Frequency: 50/60 Hz Phase: single-phase connection Fuse protection: 30 A Weight: approx. 1200 kg incl. material module Condition: used Scope of delivery: (see image) (Subject to technical changes and errors in the specifications!) If you have further questions, we will be happy to answer them by phone.

Kondisi: sangat baik (bekas), Pfeiffer DUO 65 Dual-Stage High-Performance Rotary Vane Pump We are offering a Pfeiffer DUO 65 Dual-Stage High-Performance Rotary Vane Pump. Pfeiffer DUO 65 Dual-Stage High-Performance Rotary Vane Pump Dual-stage high-performance rotary vane pump with a pumping speed up to 70 m³/h Equipped with three-phase motor With temperature sensor (3TF) for optimal motor protection Integrated gas ballast and HV safety valve Suitable for all coarse and fine vacuum applications Duo 65, 3-phase motor, 3TF, 200-230 / 346-400V, 60 Hz Model: PK D46 642 A Includes: ONF 35/65 Oil Mist Separator, corrosion-resistant version, Mounts on the pump's exhaust port and prevents air pollution caused by oil mist. Model: PK Z40 150 Scope of delivery: (See picture) For further questions, we are happy to assist you by phone. Bwedozianqepfx Apcjp Written orders may be placed by email or fax.

Kondisi: baik (bekas), Tahun pembuatan: 2002, Ref.-No.: 10442 Produsen: LIEBHERR Tipe: LC 122 Tahun pembuatan: 2002 Jenis kontrol: Kontrol CNC Kontrol: LIEBHERR PC NC Lokasi stok: Halberstadt Negara asal: Jerman Diameter maksimum pemotong gear: 90 mm Diameter meja: 145 mm Modul maks.: 3 mm Jumlah gigi terkecil yang bisa dikerjakan: 4 Sudut putar kepala pemotong: +/- 45° Akurasi resolusi: 0,1 derajat Beban meja benda kerja: 17 kN Putaran pemotong: 450 - 4.500 rpm Tegangan operasi: 400 V Tegangan kontrol: 24 V Frekuensi: 50 Hz Arus nominal maks.: 55 A Sekring pada jalur suplai: 63 A Diameter maksimum pemotongan roda gigi lurus/heliks: 125 mm Lebar pemotongan maksimum roda gigi lurus/heliks (aksial): 250 mm Bsdjym Nbcspfx Apcjwp Langkah spindle: 180 mm Lebar pemotong maksimum: 200 mm Informasi tambahan: Suhu lingkungan: +12°.....+40° Tingkat kebisingan operasi: 78 dB (A) Jenis kepala pemotong: Kepala pemotong bermotor Sumbu benda kerja: vertikal Tiang penyangga: dapat digeser Meja: tetap Proses pemotongan: hobbing axial dalam arah searah ataupun berlawanan Mesin dapat diperiksa dalam kondisi menyala setelah kesepakatan terlebih dahulu.

Kondisi: siap digunakan (bekas), Trumpf Laser TruMark 3000 unit kontrol laser penanda SN:L0131E1357 dengan kabel suplai 6m dan 2 kunci, bekas, kondisi baik, 100% fungsional, sesuai dengan foto. PERHATIAN: Biaya pengemasan dan pengiriman silakan ditanyakan secara terpisah! Bwodpjx Evakefx Apcjp

Kondisi: bekas, PFAFF HSE63 High-Performance Screw Jack Gearbox Manufacturer: PFAFF Model: HSE63 Bodpfx Aeugty Hjpcswp Max. Lifting Force: 50 kN Max. Pressure: 50 kN Screw Torque at Max. Lifting Force: 190 Nm Max. Input Shaft Torque: 168 Nm Screw: M16 Worm Gearbox with Oil Lubrication Oil Capacity: 0.7 l Screw Shaft Length: 850 mm The price listed refers to 1 unit.

Tahun pembuatan: 2014, Kondisi: baik (bekas), Fungsionalitas: berfungsi sepenuhnya, High-performance Fan Zenner, Type VTZ 710/63/1 Special, Year of manufacture 2014, consisting of control cabinet, frequency converter, rotary valve Technical Data Manufacturer: Zenner Ventilatoren Type: VTZ 710/63/1 Special Year of manufacture: 2014 Airflow Volume: 4.72 m³/s Max. Temperature: 80°C Density: 1.2 kg/m³ Total Pressure: 5,000 Pa Speed: 2900 rpm Motor: 55 kW Voltage: 400/690 V / 50 Hz Weight: approx. 800 kg The fan is designed for conveying paper/cardboard. The material is also shredded during this process. Bwedpfx Apjy Tid Escsp The machine is in good condition. It has been inspected and tested at our site in 28816 Stuhr. You can find the video on our website or our YouTube channel. Inspections, including with power connected, are possible at any time by appointment. Video calls are available upon request. We will be pleased to answer any questions about the machine by phone from Monday to Thursday between 08:00 and 14:00. On Fridays, we are available from 08:00 to 13:00. Please note: All technical data is based on the manufacturer's specifications. We accept no liability for the information provided or any possible errors. Offers are subject to change without notice, prior sale reserved, and may be withdrawn at any time. Inspections are possible by appointment. Sale is ex location, without warranty or guarantee.

Kondisi: bekas, High-Performance Baler MACFAB - BEMA Type 650A Hydraulic press for packaging waste, recyclable renewable raw materials, and secondary raw materials Serial No. MF J0162 Year of manufacture: 2021 Pressing force: 50 tons Press plate stroke: approx. 1000 mm Cycle time per stroke: approx. 40 sec. Press chamber base area: 1500 x 1100 mm Press chamber height: 1650 mm Filling opening: 1500 x 870 mm Filling height: approx. 1250 mm Bale size: 1500 x 1100 mm Bale height: max. 1100 mm Hydraulic operating pressure: 200 bar Motor power: 5.5 kW Power supply: 400 Volt, 50 Hz, 12 Amp. - Equipped with two hydraulic cylinders - Door locking via threaded spindle with handwheel - Press operation possible only when press chamber door is closed - Two-hand control for hydraulic ejection of finished bale Bwsdpfx Apevq Rtkocep - Clearances for manual strapping - Produces standard industrial bales of 1500 x 1100 x 1100 mm - The highly compacted bale is automatically tilted onto a pallet - Only 62 operating hours Installation dimensions (L x W x H): 2120 x 1350 x 3220 mm Transport height with retracted hydraulic cylinders: approx. 260 cm Weight: 1.8 tons The machine is in excellent, as-new condition. The new price for this press from BEMA is EUR 22,200 net. BEMA also purchases packaging waste that you bale with this press.

Kondisi: baru, Tahun pembuatan: 2025, Betriebsbereich: 1000×1500 mm Maschinenabmessungen (L×B×H): 3630×2200×1940 mm Laserleistung: IPG 3000 W / 2000 W / 1500 W Bwsdpfjg Rgq Ssx Apcjp Positioniergenauigkeit X/Y-Achse: ±0,05 mm Wiederholgenauigkeit X/Y-Achse: ±0,03 mm Max. Verfahrgeschwindigkeit X/Y-Achse: 60 m/min 1. Kompaktes Design mit umfassendem Schutz Geringer Platzbedarf bei gleichzeitig vollständigem Schutz für maximale Sicherheit. 2. Kein Vibrieren beim Schneiden von Dünnblech Die i-Serie ermöglicht exakte Schneidkanten bei Dünnblechen, ganz ohne Vibrierspuren. 3. Graugussbett Das Graugussbett sorgt für optimale Dämpfung und behält dank bester mechanischer Eigenschaften dauerhaft seine Form.

Kondisi: bekas, nomor mesin/kendaraan: 4131, Order no. Lg 34422 Bodpfx Apeinzdljcjwp High-performance punching press BRUDERER BSTA 60 H from ongoing production. Stroke adjustment requires repair. Without soundproof enclosure and without coil feed line. Feed unit BBV 202/120

Tahun pembuatan: 2012, Kondisi: baik (bekas), nomor mesin/kendaraan: 1224432950, Vertical stack delivery Bwjdjlqxitjpfx Apcjp Machine number: FH.DMBO-00357

Kondisi: baru, Tahun pembuatan: 2025, Working area: 3048 x 1524 mm Overall machine dimensions: 4960 × 2280 × 2200 mm Laser output power: IPG 3000W / 2000W / 1500W X/Y-axis positioning accuracy: ±0.05 mm Bwodpfx Asg Rgrpspcjp X/Y-axis repeat positioning accuracy: ±0.03 mm X/Y-axis max. rapid traverse speed: 100 m/min

Kondisi: baru, Tahun pembuatan: 2025, Working area: 3048 x 1524 mm Overall machine dimensions: 4960 × 2280 × 2200 mm Laser output power: IPG 3000W / 2000W / 1500W X/Y-axis positioning accuracy: ±0.05 mm X/Y-axis repeat positioning accuracy: ±0.03 mm X/Y-axis max. rapid traverse speed: 100 m/min Bwjdpfx Apog Db Taecop

Kondisi: baru, Tahun pembuatan: 2025, de Bwedpjg Rgvhjfx Apcep

Tahun pembuatan: 1979, Kondisi: bekas, Centrifugal High-Performance Kieselguhr Filter with Buffer Tank, KG-Dosing Vessel, and Peristaltic Pump. Machine (Additional): Kieselguhr Filter Capacity approx.: 110 hl/h Tank Volume: 1,550 l Operating Pressure: 9 bar Operating Temperature: 100°C Operation / Control: Control cabinet with push buttons Material: Stainless steel Equipment: Kieselguhr dosing vessel, 14.26 hl; peristaltic pump Bjdpjvcqmbefx Apcswp Peripherals: Buffer tank, vessel.

Tahun pembuatan: 1975, Kondisi: bekas, Horizontal pressure filter system with filter elements arranged one above the other. At the end of the filtration process, the diatomaceous earth is discharged centrifugally. Bwodpovcqpcofx Apcsp Machine (additional info): Horizontal sieve filter Capacity: 140 hl/h Vessel volume: 26 hl Length: approx. 4000 mm Width: approx. 2000 mm Height: approx. 3500 mm Material: Stainless steel 1.4541 (vessel) Base frame: Mounted on feet Equipment: Diatomaceous earth dosing vessel with dosing pumps; pumps; fittings; instrumentation