Beli Waldrich Planer bekas (1.563)

Kondisi: bekas, jarak sumbu-X 17.700 mm jarak sumbu-Y 4.755 mm jarak sumbu-Z 800 mm lebar pemotongan 3.450 mm jarak antara meja – spindel frais vertikal 3.682 mm tinggi meja dari lantai 500 mm diameter spindel pada bantalan depan 200 mm rentang kecepatan putaran 12 - 450 RPM dudukan alat ISO 60 Pgodpezwg Nkofx Aagjr penyesuaian aksial pada pelat spindel 800 mm kecepatan lambat 5 dan 50 mm/menit umpan variabel 10 - 3.000 mm/menit penyesuaian melintang pada penyangga frais balok silang 4.745 kecepatan cepat 2 m/menit kecepatan lambat 3 dan 30 mm/menit umpan variabel 6 - 2.000 mm/menit kecepatan cepat 10 m/menit kecepatan lambat 3 dan 30 mm/menit umpan variabel 6 - 2.000 mm/menit penyesuaian vertikal pada balok silang 3.682 mm kecepatan cepat 1,5 m/menit kecepatan lambat 1,25 dan 12,5 mm/menit umpan variabel 5 - 1.500 mm/menit ukuran meja 17.800x2.800 mm lebar ruang rangka 3.600 mm sistem kontrol SIEMENS 840 C kapasitas beban meja 50.000/100.000 kg daya penggerak spindel utama 100 kW total kebutuhan daya 170 kW berat mesin sekitar 300 ton ruang yang dibutuhkan sekitar 40 x 8,4 x 8,6 m mesin dilengkapi dengan kepala frais sudut untuk pemesinan mesin besar. + seluruh sistem kelistrikan diperbarui termasuk panel kontrol, kabel, motor, dan dilengkapi dengan SIEMENS 840C pada tahun 1999. + termasuk 16 kepala frais dan berbagai alat. Penggerak sumbu-X terdiri dari sekrup hidrostatik dengan rak gigi hidrostatik.

Kondisi: sangat baik (bekas), Tahun pembuatan: 1994, jam operasional: 1.930 h, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 7.200 mm, jarak lintasan sumbu Y: 4.200 mm, jarak gerak sumbu Z: 1.750 mm, kecepatan pemakanan sumbu X: 15.000 m/menit, laju pemakanan gandar Y: 15.000 m/menit, laju pemakanan sumbu Z: 15.000 m/menit, panjang total: 15.000 mm, panjang meja: 5.000 mm, lebar total: 15.000 mm, kecepatan spindel (min.): 10 rpm, kecepatan spindel (maks.): 4.000 rpm, tinggi total: 7.500 mm, tinggi meja: 1.350 mm, jarak antara penyangga: 3.500 mm, jenis arus masuk: AC (pendingin udara), beban meja: 65.000 kg, berat benda kerja (maks.): 65.000 kg, jarak dari tengah meja ke hidung spindel: 2.300 mm, berat keseluruhan: 210.000 kg, daya motor spindle: 50.000 W, description-pdf-01 Podpovv N I Refx Aagegr

Kondisi: sangat baik (bekas), Tahun pembuatan: 1990, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 3.8203, jarak pergerakan sumbu X: 7.570 mm, jarak lintasan sumbu Y: 4.900 mm, jarak gerak sumbu Z: 1.000 mm, kecepatan pemakanan sumbu X: 15 m/menit, laju pemakanan gandar Y: 15 m/menit, laju pemakanan sumbu Z: 10 m/menit, panjang total: 18.700 mm, panjang meja: 6.850 mm, lebar meja: 2.250 mm, lebar total: 8.500 mm, kecepatan spindel (min.): 5 rpm, kecepatan spindel (maks.): 2.000 rpm, tinggi total: 7.050 mm, tinggi meja: 300 mm, gerak cepat sumbu X: 15 m/menit, pergeseran cepat sumbu Y: 15 m/menit, pergerakan cepat sumbu Z: 10 m/menit, jarak antara penyangga: 2.750 mm, jenis arus masuk: AC (pendingin udara), beban meja: 60.000 kg, berat benda kerja (maks.): 60.000 kg, jarak meja ke pusat spindel: 2.500 mm, berat keseluruhan: 145.000 kg, daya motor spindle: 63.000 W, panjang langkah makan poros W: 2.000 mm, Mesin dalam keadaan terdisassembly dan tersedia di gudang. KAPASITAS: Pergerakan Sumbu X: 7570 mm Pergerakan Kepala Sumbu Y: 4900 mm Langkah Ram Sumbu Z: 1000 mm Pergerakan melintang Sumbu W: 2000 mm Luas Penampang Ram: 500 mm x 500 mm Jarak Antar Kolom: 2600-2750 mm Pgedpoyl S Ngsfx Aagjr Jarak Meja ke Permukaan Ram: 2500 mm Ukuran Meja: 2x3000+850 mm x 2250 mm, dua meja untuk operasi terpisah atau terpadu Diameter Spindel (Mandrel): 225 mm Tirus Spindel: ISO #50 Kecepatan Spindel: 0-2000 RPM Motor Spindel: 63 KW DILENGKAPI DENGAN: Sistem SIEMENS 840D CNC, baru pada tahun 2008 Kepala pemotong kontinu biaxial CNC Kepala pemotong sudut kanan 700 mm Kepala pemotong sudut kanan ramping 900 mm Kepala pemotong lurus 700 mm Gerobak untuk penggantian kepala dan penggantian alat Bantalan Hidrostatik Sistem Pendingin Konveyor Serpihan Sepanjang Pelindung Rel Motor Spindel 63 KW Pergerakan cepat: W-2000 mm/menit, Z-10.000 mm/menit, X dan Y-15.000 mm/menit Beban meja: 30.000 kg+30.000 kg, maksimum 60.000 kg Berat mesin: 143.000 kg Dimensi luar: 18.700 x 8.500 x 7050 mm

Tahun pembuatan: 2016, Kondisi: bekas, berat keseluruhan: 300.000 kg, panjang total: 16.000 mm, lebar total: 9.000 mm, tinggi total: 8.000 mm, Waldrich Coburg 17 S-10 FP 300 NC / 5 m – Mesin Bubut Portal CNC Mesin: 17-10 FP 300 NC / 5 m Nomor Seri: 2.8304.06 Tahun Pembuatan Asli: 1983 Pada tahun 2016, mesin ini direkondisi dan dimodernisasi secara menyeluruh oleh produsen, Waldrich Coburg. Mesin ini dilengkapi dengan sistem kontrol Siemens SINUMERIK 840D sl yang modern dan ideal untuk pemesinan berat pada benda kerja yang besar dan kompleks di bidang pembuatan mesin, perkakas, cetakan, dan peralatan energi. Lingkup pengiriman mencakup kepala bubut universal USP 300 C 350 dengan sumbu B dan kepala bubut sudut tambahan WFU 500 SZ 400 F17, yang memastikan berbagai kemungkinan pemesinan untuk tugas-tugas pembubutan yang menantang. Mesin ini memiliki penutup pelindung penuh yang modern, sistem pendingin, sistem pembuangan serpihan, dan dokumentasi teknis yang lengkap termasuk diagram pengkabelan dan dokumen rekondisi. Mesin ini telah dibongkar dengan benar dan dikemas dalam kontainer. Pgedozc Sagopfx Aagor Saat ini berada di Pelabuhan Hamburg dan siap dikirim ke seluruh dunia. Produsen: Waldrich Coburg Rekondisi oleh Waldrich Coburg (2016) Siemens SINUMERIK 840D sl Kepala bubut universal USP 300 C 350 Kepala bubut sudut tambahan WFU 500 SZ 400 F17 Berat benda kerja hingga 100 ton Penutup pelindung penuh Dokumentasi teknis lengkap tersedia Dibongkar dan siap dimuat Lokasi: Pelabuhan Hamburg, Jerman Tersedia segera Jenis penerima perkakas: ISO 50 Langkah sumbu X: 5700 - mm Gerakan sumbu B: 0 - 180 ° Dimensi (P x L x T) sekitar: 16000 x 9000 x 8000 mm Ruang antara tiang: 3.500 mm Pemesinan 5 sumbu: Ya Langkah sumbu Y: 3500 - mm Berat sekitar: 300.000 kg Langkah sumbu W: 800 - mm Langkah sumbu Z: 2050 - mm Tahun pembuatan: 2.016 Kondisi: belum diperiksa Ketentuan pembayaran: 100% uang muka sebelum pengambilan Ketentuan pengiriman: FOB, bebas di atas kapal Beroperasi dengan listrik: Tidak

Kondisi: siap digunakan (bekas), Tersedia sebuah mesin ketam portal tua (mesin gerinda rel pemandu) Waldrich Coburg. Panjang meja: 5500 mm, lebar meja: 750 mm, dimensi mesin X/Y/Z: kira-kira 12000 mm/300 mm/3000 mm, berat: sekitar 37500 kg. Inspeksi di lokasi memungkinkan. Pgjdpow Rqw Hefx Aagsr

Kondisi: baik (bekas), * Panjang mesin: ~ 19.600 mm * Lebar mesin: ~ 6.200 mm * Tinggi mesin: ~ 2.500 mm Pgodpfx Aeud R Szeagsr * Berat gulungan maksimum: 50 ton * Panjang gulungan: maks. 13.000 mm * Diameter gulungan: maks. 2.000 mm * Kecepatan putaran spindel penggerinda: 450 – 1.800 putaran/menit * Kecepatan potong: 10 – 45 m/s * Jarak yang dapat disesuaikan: ~ 13.900 mm Mesin ini pertama kali dikirim dalam kondisi baru pada tahun 1986 dan ditingkatkan pada tahun 2014, termasuk sistem kontrol Siemens yang baru.

Kondisi: sangat baik (bekas), Tahun pembuatan: 1995, X-axis travel 14,000 mm y-axis travel 5,000 mm z-axis travel 1,500 mm w-axis 3,000 mm Distance between columns 4,000 mm Portal column: Distance table to spindle nose 4,500 mm Workpiece weight 100 t Table dimensions - longitudinal 9,000 mm Table dimensions - transverse 3,000 mm Spindle taper ISO SK 50 Psdpfsvwgm Hex Aagogr Spindle speeds 2-2,500 rpm Spindle drive 113 kW Spindle diameter 200 mm Spindle torque 9,500 Nm Feed range x-axis 1-10,000 mm/min Feed range y-axis 1-10,000 mm/min Feed range z-axis 1-10,000 mm/min Rapid traverse 20,000 mm/min Height above floor 8,600 mm Control SIEMENS 840C Machine weight approx. 360 t >>>retrofit 2011

Kondisi: baik (bekas), Tahun pembuatan: 2005, x-travel 6000 mm y-travel 3500 mm z-travel 1500 mm Control SIEMENS 840D Table load capacity 12 t Height above floor level 6300 mm Table dimensions - longitudinal 5000 mm Table dimensions - crosswise 2500 mm Psdpfx Aasvwglvogegr Number of tables 2 Tool changer 200 positions Max. tool weight 30 kg Tool holder HSK A 100 Max. tool diameter 250 mm Max. tool length 500 mm Spindle speeds 5-6000 rpm C-axis -10 to 370° B-axis 5 to -95° Column clearance 3000 mm Distance spindle nose to table 1500 mm Machine weight approx. 161 t Space requirement approx. 20.5 x 11 x 6.3 m This WALDRICH-COBURG Valutec portal milling machine is in a very, very good condition and can be inspected by appointment with the seller.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2002, x-axis 4000 mm y-axis 3500 mm z-axis 1500 mm Control: SIEMENS 840 D w-axis 1500 mm Column clearance: 2500 mm Clamping surface: 3000 x 2000 mm Workpiece weight capacity: 10,000 kg Spindle speeds: 5-6,000 rpm Gear stages: 2 Drive power - milling spindle: 45 kW Distance spindle to clamping spindle: 3500 mm Spindle torque: 1,250 Nm Tool changer capacity: 200 positions Tool diameter: 135 / 250 mm Max. tool weight: 50 kg Max. tool length: 400 mm Tool holder: ISO SK-50 The portal milling machine is in very good condition. Pgodpjvwgmmsfx Aagjr ADDITIONAL EQUIPMENT FOR DRILLING/MILLING Angle milling head yes Automatic tool clamping yes Ball screw drives yes Guideway covers yes Coolant system yes High pressure cooling system (internal coolant supply) yes Fully enclosed work area yes Portal machining center with tool changing system and second table plate.

Tahun pembuatan: 1985, Kondisi: bekas, de-en-20240620-01 Podpfx Aaetzdyzegjgr

Kondisi: bekas, Upper slide, cross slide, cross table, cross slide table - The upper slide is from a Waldrich Coburg portal milling machine, model: 12 D 3232-550 HL - Table surface: mm - Travel: x 350 mm / y 220 mm - Dimensions: 1380/1000/H800 mm Psdpfx Aajct Aa Rogsgr - Weight: 800 kg

Kondisi: baik (bekas), Universal milling head, milling arbor, milling extension, angle milling head - Manufacturer: Waldrich Pgodpfxjfxlf Ao Aagjr - Spare part: from a milling machine - Milling head: swiveling - Quill stroke: 150 mm - Spindle taper: SK50 - Motor: 11 kW, 1470 rpm - Spindle speed: 25 – 560 rpm - Transport dimensions: 1550 x 600 x H460 mm - Weight: 636 kg

Kondisi: baik (bekas), fr-to-hu-it-lt Pgedpfjzbt S Isx Aagor

Kondisi: diremajakan ulang (bekas), Tahun pembuatan: 2021, Fungsionalitas: berfungsi sepenuhnya, panjang meja: 10.900 mm, panjang pemakanan sumbu X: 10.200 mm, panjang umpan sumbu Y: 1.960 mm, panjang umpan sumbu Z: 1.850 mm, tinggi penyerutan: 1.850 mm, lebar perataan: 1.750 mm, kecepatan spindel (min.): 9.000 rpm, WALDRICH COBURG Hydraulic Double-Column Planing and Grinding Machine Control System: Conventional contactor control Operation: Original Waldrich Coburg main control panel with push buttons, rotary switches, analog indicators, and emergency stop Display / Positioning: 2 x HEIDENHAIN POSITIP digital position displays / positioning aids on the main control panel Additional control units: Siemens SIMATIC HMI KTP700 / KTP400 for grinding support and grinding attachment Partial modernization 2021: approx. EUR 170,000 Continuous modernizations / retrofits up to 2021 Retrofitted grinding attachment Modernized grinding support Siemens / Lenze drive technology Switch cabinet and modernization documentation available Working Area Maximum planing width / clamping: 1,750 / 1,790 mm Maximum throat height: 1,850 mm Total clamping area: 10,900 x 1,500 mm Additionally documented: 2 x 4,750 x 1,500 mm Usable table/length per specification: approx. 10,200 mm T-slots: 7 units T-slot spacing: 210 mm T-slot width: 28 mm Minimum crossbeam / cross-rail width: 420 mm Crossbeam / Columns / Supports Number of crossbeams: 2 Number of columns: 2 Crossbeam horizontal stroke: 1,960 mm Crossbeam vertical stroke: 250 mm Column horizontal stroke: 550 mm Column vertical stroke: 1,850 mm Support swiveling: +/- 60° Support tiltable: +/- 25° Speeds / Feeds Working speed: 5 - 60 m/min Return speed: 5 - 60 m/min Planing slide vertical: 0.1 - 7.5 mm Pedpfx Aasy Ubn Ssgsgr Planing slide horizontal: 0.1 - 15 mm Column slide vertical: 0.1 - 7.5 mm Column slide horizontal: 0.1 - 7.5 mm Dimensions / Weight / Connection Space requirement: 22.67 x 3.97 m Height: 3.95 m Weight: approx. 51,872 kg Voltage: 500 V Fuse protection: 125 A Current type: three phase Frequency: 50 Hz Grinding Support / Grinding Attachment Grinding support with grinding spindle Guideway system with base body and Z-axis Y-axis grinding support retrofitted to ball screw spindle 40 x 10 Preloaded double nut Single-axis control for feed axis Right angle gear motor 72 Nm Synchronous servo motor 11 Nm with absolute encoder Rittal compact control cabinet Grinding Spindle / Grinding Wheel Drive Siemens asynchronous motor for grinding spindle 9 kW at 1,500 rpm / 57 Nm 10 kW at 1,750 rpm / 55 Nm Max. speed: 9,000 rpm Siemens SINAMICS drive technology Siemens SIMATIC control unit for grinding support / grinding attachment Lenze L-force axis drive for Y-axis grinding support Separate control cabinets for grinding wheel drive and Y-axis grinding support Cooling / Hydraulics Schimpke DK150-V cooling unit Cooling capacity approx. 17.5 kW Cooling medium: oil ISO VG46 Gear pump approx. 135 l/min against 10 bar Pump motor approx. 5.5 kW Transformer 500 V to 400 V Separate hydraulic unit available Mechanics / Overhaul Partial overhaul on bed/table, crossbeam with Y1/Y2 slides, Z1-axis planing support and lubrication system Machine bed hand-scraped Bed geometry established Table hand-scraped Guideways reworked Y1/Y2 slides hand-scraped Rails coated and hand-scraped Steel tape replaced Central lubrication extended Scrapers replaced Crossbeam lifting system repaired Worm shaft, central drive shaft, coupling pieces, and rolling bearings replaced X-axis bellows replaced Condition / Equipment Column area newly painted Table and functional surfaces in very good condition Accessories, components, and spare parts available

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1985, jarak pergerakan sumbu X: 2.500 mm, panjang meja: 5.000 mm, lebar meja: 2.500 mm, kecepatan spindel (maks.): 2.000 rpm, tinggi total: 125.000 mm, produsen pengendali: SIEMENS, model controller: Sinumerik 840, jumlah sumbu: 5, This 5-axis WALDRICH COBURG 17-10 FP NC/5 was manufactured in 1985 and last retrofitted in 2011. It features a maximum workpiece weight of 60 tons and an impressive table size of 2,500 mm by 5,000 mm. The machine is equipped with a Sinumerik 840 control system, ensuring precise operations. If you are looking for a high-quality milling machine, you should consider the WALDRICH COBURG 17-10 FP NC/5 portal milling machine that we have for sale. Contact us for further details. • Max. workpiece weight: 60 tons • Tool taper: ISO 60 • Milling width without column covers: 3,000 mm • Milling width with column covers: 2,850 mm • Travel of the milling support: 5,270 mm Pgedpfx Ajy S Twysagsr • Distance from table to face of vertical spindle: 2,750 mm • Vertical travel of cross rail: 2,250 mm • Clamping length: 5,000 mm • Longitudinal table travel: 5,700 mm • Table height above floor: 500 mm • The machine was retrofitted in 2011, 2008, and 1997.

Kondisi: bekas, Tahun pembuatan: 1962, de-hu-001 Pgjdeyqud Dopfx Aagor

Kondisi: bekas, Tahun pembuatan: 2013, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 17.000 mm, jarak lintasan sumbu Y: 4.800 mm, jarak gerak sumbu Z: 1.500 mm, panjang meja: 16.000 mm, lebar meja: 3.000 mm, kecepatan spindel (maks.): 3.000 rpm, gerak cepat sumbu X: 12 m/menit, pergeseran cepat sumbu Y: 8 m/menit, pergerakan cepat sumbu Z: 8 m/menit, jarak antara penyangga: 3.800 mm, jenis arus masuk: tiga fasa, posisi kepala milling: vertikal / Winkelkopf, kecepatan rotasi (maks.): 3.000 rpm, jarak meja ke pusat spindel: 2.300 mm, berat keseluruhan: 90.000 kg, hidung spindel: ISO 60 / ISO 50 Adapter, daya motor spindle: 60.000 W, Perlengkapan: kecepatan rotasi dapat diubah tanpa batas, ➡️ WALDRICH COBURG CNC GANTRY MILLING MACHINE ⬅️ Heavy-duty machining | Siemens 840D Retrofit | Ready for production For sale is a high-quality CNC gantry milling machine from the premium manufacturer Waldrich Coburg, in excellent condition. ✔ Machine under power Psdpfx Aasy Rrb Ijgjgr ✔ Inspection and test run possible ✔ Siemens 840D retrofit (2013) ✔ New electrics & control cabinets ✔ New motors & drives ✔ Heidenhain glass scales on all axes ✔ Ideal for large workpiece machining & heavy-duty cutting Technical Data X-axis travel: 17,000 mm Y-axis travel: 4,800 mm Z-axis travel: 1,500 mm Clamping area / bedplates: 16,000 x 3,000 mm Column gap: 3,800 mm Distance table to milling spindle: 2,300 mm Spindle power: 60 kW Speed range: 0.4 – 3,000 rpm Tool holder: ISO 60 / ISO 50 adapter Machine weight: approx. 90,000 kg Equipment Siemens 840D CNC control 2-speed gearbox WFU 250 angle head with automatic indexing WFU 500 angle head with automatic indexing High-speed tapping Tool cart with holders Steel covers for X/Y axes 2 chip conveyors Ideally suited for: Mechanical engineering Large component machining Power plant construction Shipbuilding Steel and rolling mill industry Contract manufacturing 📍 Location: USA 🌍 Worldwide shipping can be arranged 📞 Further information, videos, or viewing appointments available upon request.

Kondisi: bekas, Tahun pembuatan: 1983, Grinding length: 8,400 mm Grinding width: 1,450 mm Workpiece height: 1,250 mm Clamping surface: 8,000 x 1,250 mm Table height above floor: 920 mm Distance between columns: 1,470 mm Max. workpiece weight: 59,700 kg Machine weight approx.: 59.7 t Space requirement approx.: 22 x 5 x 5 m Adjustment ranges: - Crossbeam, vertical: 1,250 mm - Grinding support, horizontal: 3,100 mm Adjustment speeds: - Machine table (X-axis): Infinitely variable 1–45 m/min Table crawl speed: 5 m/min - Grinding support, horizontal (Y-axis): Rapid traverse: 3,000 mm/min Feed per step: 0.001–0.099 mm Continuous feed: 100–3,000 mm/min Creep feed: 18+1 mm/min Incremental in-feed: 0.001–0.019 mm - Crossbeam (W-axis): Rapid traverse: 410 mm/min Table drive: - Oil gearbox, type Iv4 Pgsdjvr Hgvepfx Aagor - Cylinder Ø: 185 mm - Piston rod Ø: 130 mm - Drive motor: 22 kW

Kondisi: sangat baik (bekas), Tahun pembuatan: 1994, Four-sided planer/moulder HARBS, 8 heads. Long infeed table, 3 meters. Machine weight: 5,500 kg. Cardan shaft drive. Head configuration: bottom horizontal, right vertical, second right vertical, left vertical, top horizontal, bottom horizontal, top horizontal, top horizontal. Motors: 5.5 kW and 7.5 kW. Planing width: 230 mm. Planing height: 160 mm. Pjdpjl Dw Nxefx Aagegr

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2003, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 4.000 mm, jarak lintasan sumbu Y: 3.000 mm, jarak gerak sumbu Z: 1.500 mm, beban meja: 12.000 kg, kecepatan rotasi (maks.): 6.000 rpm, jumlah slot dalam magazin alat: 100, TECHNICAL DETAILS X-axis: 4,000 mm Y-axis: 3,000 mm Z-axis: 1,500 mm C-axis: -10 to 370° B-axis: -5 to 95° Table, longitudinal: 0 - 30 m/min Milling and drilling unit, horizontal: 0 - 60 m/min Spindle slide, vertical: 0 - 60 m/min Spindle unit horizontal/vertical: 0-15 / 0-10 rpm Clear height: 1,550 mm Clear width: 2,500 mm Table Clear height between table and spindle nose: 1,550 mm Clear width: 2,500 mm Table width: 2,000 mm Table length: 3,000 mm T-slots, transverse: 22 H8 mm, spacing 250 mm T-slots, longitudinal: 15 H7 mm (250 mm from outside, 10 mm deep) Max. table load: 12,000 kg Drilling spindle speed range 1st gear: 5 - 1,400 rpm 2nd gear: 25 - 6,000 rpm Max. torque: 800 Nm Drive power: 30 kW Cross-section of spindle slide: 400 x 400 mm Tool system Tool holder according to DIN 69893: HSK-A 100 Number of tool stations: 100 Max. tool weight: 30 kg Max. tool diameter: 250 mm Max. tool length: 500 mm Distance from station to station: 140 mm Average chip-to-chip time: < 20 s Rapid traverse speeds X-axis table longitudinal: 0 - 30 m/min Y-axis milling and drilling unit horizontal: 0 - 60 m/min Z-axis spindle slide vertical: 0 - 20 m/min C-axis spindle unit horizontal: 0 - 15 rpm B-axis spindle unit vertical: 0 - 10 rpm MACHINE DETAILS Overall length of machine: 9,500 mm Overall width of machine: 6,700 mm Overall height of machine above floor: 6,200 mm Coolant system Pump pressure: 12 bar (AKM), 50 bar (IKM) Delivery rate AKM: 40 l/min at 1 bar Delivery rate IKM: 20 l/min at 40 bar at the spindle Coolant principle: two-phase drum separator Pedpfx Aasw T Rx Ajgjgr Coolant volume: 1,500 L Chip conveyor system Usable width of longitudinal conveyor: 450 mm (2 units) Usable width of cross conveyor: 225 mm (1 unit) On both sides of machine bed, cross conveyor with overflow transport

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2003, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 3.6002, jarak pergerakan sumbu X: 4.000 mm, jarak lintasan sumbu Y: 3.000 mm, jarak gerak sumbu Z: 1.500 mm, kecepatan spindel (maks.): 6.000 rpm, beban meja: 12.000 kg, RINCIAN TEKNIS Sumbu X: 4.000 mm Pedpsxvrb Nefx Aagegr Sumbu Y: 3.000 mm Sumbu Z: 1.500 mm Tinggi celah: 1.550 mm Lebar celah: 2.500 mm Lebar meja: 2.000 mm Panjang meja: 3.000 mm Beban maksimum meja: 12.000 kg Tipe dudukan alat: HSK-A100 Berat maksimum alat: 30 kg Diameter maksimum alat: 250 mm Panjang maksimum alat: 500 mm Rentang kecepatan spindle bor: 5-6.000 rpm Torsi maksimum yang diizinkan pada spindle frais: 800 Nm RINCIAN MESIN Kebutuhan daya total: 30 kW Ruang yang dibutuhkan sekitar: 9,5 x 6,7 x 6,2 m PERLENGKAPAN Pengganti palet Demmeler

Kondisi: bekas, Tahun pembuatan: 1970, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 2.1902.01, panjang meja: 7.000 mm, kecepatan pemakanan sumbu X: 30 m/menit, tinggi penyerutan: 6.900 mm, lebar meja: 1.800 mm, en Pgedpfxjyt Ey Us Aager

Kondisi: sangat baik (bekas), Tahun pembuatan: 2016, Steton 5-head four-side planer. Steton 5-head four-side planer. The machine has been serviced and requires no further investment. Technical specifications: - Maximum working width: 23 cm - Maximum working height: 13 cm - Spindle diameter: 40 mm - 1 - Bottom horizontal: 23 cm - 2 - Right vertical: 13 cm - 3 - Left vertical: 13 cm Pgsdpji Apuhjfx Aagsr - 4 - Top horizontal: 23 cm - 5 - Universal head with 360-degree soundproof cabin - Electrically adjustable planing thickness - Two feed speeds

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1979, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 2.4212.06, lebar penggilingan: 1.450 mm, berat benda kerja (maks.): 11.000 kg, panjang penggilingan: 3.000 mm, lebar meja: 3.000 mm, panjang meja: 1.250 mm, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Table and Workpiece Table clamping surface: 3,000 x 1,250 mm Total table dimensions: 6,000 x 1,800 x 1,000 mm Clearance between columns: 1,650 mm Grinding length: 3,000 mm Grinding width: 1,450 mm Max. workpiece height: 1,250 mm Crossbeam adjustment: 1,250 mm Max. workpiece weight: 11 t Table feed: 1 to 45 m/min Control and Grinding Supports Universal grinding support: 7.5 kW Swiveling of grinding spindle: +/- 110° Pedpfew Srzcsx Aagsgr Grinding wheels (universal grinding support): 500 x 60 mm Vertical adjustment (universal grinding support): 350 mm Peripheral grinding support: 22 kW Grinding wheels (peripheral grinding support): 600 x 120 mm Vertical adjustment (peripheral grinding support): 150 mm MACHINE DETAILS Electrical Data Total connected load: 40 kW Dimensions & Weight Weight: approx. 45 t Installation dimensions: 12,000 x 6,000 x 4,800 mm Note: The machine can be dismantled and loaded for €10,000.

Kondisi: sangat baik (bekas), Tahun pembuatan: 1962, nomor mesin/kendaraan: 12.178, CNC roll grinding machine WALDRICH SIEGEN Type WS IIa 100/25 x 5000 For sale is a high-precision roll grinding machine from WALDRICH SIEGEN in proven industrial design. The machine was retrofitted with CNC control by HERKULES in 1996 and is in excellent mechanical condition. Condition / Note: The machine is currently not operational, as the electrical equipment and CNC control system need to be renewed. 👉 This offers the ideal basis for a tailored retrofit with modern control technology – precisely matched to your production requirements. Technical Data: Max. grinding diameter: 1,200 mm Max. grinding length: 5,000 mm Max. roll weight: 25 t Z-axis travel: 5,000 mm X-axis travel: 900 mm Grinding wheel: max. Ø 900 mm Main drive: 40.5 kW Grinding spindle drive: 97.5 kW Equipment: Hollow and camber grinding device CNC grinding support Precision machining up to 0.001 mm accuracy Continuous feed (wear compensation) Partially overhauled and newly painted Pgedpfofbb D Dox Aager Your advantages: Excellent mechanical condition – optimal foundation for modernization High-precision machining of large rolls Retrofit enables modern technology at significantly reduced investment costs Individually adaptable to your requirements Inspection: The machine can be inspected at any time by appointment in our warehouse.