Beli Weiler Condor 81 Geometrisch Überholt bekas (2.952)

Kondisi: hampir baru (bekas), Fungsionalitas: berfungsi sepenuhnya, Weiler centre lathe model Condor 81, lead and feed screw lathe with 3-axis digital readout from K&C, NEW Geometrically overhauled with acceptance protocol covering new machine tolerances Technical Data: >> Machine No. 84-121 >> Centre height: 165 mm >> Centre distance: 750 mm >> Spindle speeds: from 22 to 2800 rpm >> Spindle bore: 40 mm >> Short taper spindle nose, DIN 55027 size 5, with bayonet lock >> Tailstock: MT 3 >> Feeds: from 0.015 to 0.46 mm/rev >> Thread cutting: metric, imperial, module, and diametral pitch >> Metric thread pitches: from 0.18 to 28 mm >> Weight: approx. 1100 kg >> Spindle brake switchable >> Dimensions: length 1.83 m, height 1.29 m, depth 0.88 m Accessories and Features: >> 3-axis digital readout by K&C, new, 12 months manufacturer warranty, with user manual Functions: mm/inch switching, coordinate selection ABS/INC, value halving, reference point, tool programming for 200 tools, taper calculation, radius/diameter mode, quick zeroing, direction reversal Lhedpewrm Dtofx Ac Hok >> Collet chuck new, collets new from 3 to 26 mm in 1 mm increments >> 160 mm 3-jaw chuck with 2 sets of jaws, new >> Multifix size B, new, with 3 toolholders >> Bed stop >> Electrical chuck guard, new >> Rear chip guard >> Operators manual >> Coolant system >> Machine levelling pads About the Machine: Offered is a Weiler Condor 81 lead and feed screw lathe in excellent, geometrically overhauled condition. The bedways have been reground and/or hand-scraped as new. Delivery with inspection protocol. Accessories such as collets and chuck are new. Safety features: The machine is equipped with a braking motor, electronic spindle guard, and two emergency stop switches – making it an as-new condition lathe. Even at high speeds, the Weiler runs very smoothly. This newer generation of Weiler lathes is highly user-friendly and allows for ground-like finish surfaces to be produced. Take the opportunity to inspect this machine under power on site and convince yourself of its condition.

Kondisi: baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Used L + Z lathe with 3-axis digital readout Manufacturer: WEILER Model: Condor 81 B Machine No.: 87596 Year of manufacture: approx. 1987 Centre distance: 750 mm Swing over bed: Ø 330 mm Centre height over bed: 165 mm Swing over cross-slide: Ø 180 mm Centre height over cross-slide: 90 mm Spindle bore: Ø 40 mm Tailstock taper: MT 3 Quill travel: 110 mm Spindle speed: 45 - 2800 rpm (16 steps + 2 motor speeds) Feed range: 0.016 - 0.50 mm/rev Drive power: 1.6 + 3.2 kW (drive motor speed 1+2) Power supply: 400 Volt, 50 Hz Connected load: 32 kW Control voltage: 42 Volt Equipment & accessories: - Heidenhain 3-axis digital readout, type VRZ 750 - Quick clamping unit and various collets + draw tube - 3-jaw power chuck Ø 160 mm Forkardt F160 - Multifix quick-change toolpost, size B Lhedpfx Acjvadqzs Hok - LED work lamp - Bed stop - Automatic longitudinal and facing feeds - Electro-mechanical spindle brake, switchable - 2x Emergency stop - Electronic chuck key interlock (via sleeve with switch) - Coolant tank with pump integrated in machine base - Hinged chuck guard - Splash guard panel - Circuit diagram - Adjustable machine feet Space required: 1850 x 950 x 1400 mm (L x W x H) Weight: approx. 1100 kg This newer generation of Weiler lathes is very user-friendly and robust. The machine can be demonstrated under power on site. All information is without guarantee. Subject to prior sale.

Kondisi: bekas, en-001 Ljdpfxok S Ht Aj Ac Hjhk

Kondisi: hampir baru (bekas), Fungsionalitas: berfungsi sepenuhnya, Weiler Commodor Lead and Feed Screw Lathe with 3-Axis Digital Readout K&C, FULLY REFURBISHED with Measurement Protocol certifying New Machine Tolerances Technical Specifications: >> Machine No. 2268-87 >> Center Height: 180 mm >> Distance Between Centers: 1000 mm >> Spindle Speeds: from 13 to 2000 rpm >> Spindle Bore: 56 mm >> Short Taper Spindle Nose, DIN 55029, Camlock Lhsdpfsymznhsx Ac Hok >> Tailstock: MT 4 >> Feed rates from 0.026 to 0.888 mm/rev >> Thread Cutting: Metric, Imperial, Module, and Diametral Pitch >> Metric Thread pitches from 0.35 to 12 mm >> Weight: approx. 1500 kg >> Switchable Spindle Brake >> Motor Power: 2.0/4.0 kW >> Length: 2.2 m, Height: 1.5 m, Depth: 1 m Accessories and Features: >> New K&C 3-axis Digital Readout, 12-month Manufacturer Warranty with Operating Manual >> New 200 mm Three-Jaw Chuck with 2 sets of jaws >> New Multifix Size B with 3 tool holders >> Bed Stop >> Machine Mounts >> Coolant system >> LED Machine Lamp For safety, the machine is equipped with: >> Electronic Spindle Guard >> Spindle Brake >> 2 Emergency Stops Optional: Lead and feed screw covers About the Machine: We are offering a Weiler Commodor lead and feed screw lathe in geometrically refurbished condition. Guideways have been newly ground and/or scraped. Acceptance in accordance with the inspection protocol. Painted in 2K high-gloss white. The Multifix quick-change toolpost and chuck are both new. Safety: The machine features a brake motor, electronic spindle guard and two emergency stop buttons, making it essentially as-new. The Weiler runs very smoothly even at high spindle speeds. This newer generation of Weiler lathes is extremely user-friendly and enables production of surfaces with ground-like finish. Take advantage of the opportunity to view and test the machine under power on-site and confirm its condition for yourself.

Kondisi: hampir baru (bekas), Fungsionalitas: berfungsi sepenuhnya, Weiler Commodor Lead and Feed Screw Lathe with 3-Axis K&C Digital Readout, NEWLY Overhauled with Acceptance Protocol for New Machine Tolerances Technical Data: >> Machine No.: 2020 >> Center Height: 180 mm >> Distance Between Centers: 1000 mm >> Spindle Speeds: from 13 to 2000 rpm >> Spindle Bore: 56 mm >> Short Taper Spindle Nose DIN 55029 Size 5 >> Tailstock Taper: MK 4 >> Feeds: from 0.026 to 0.888 mm/rev >> Threads Possible: Metric, Imperial, Module, and Diametral Pitch >> Metric Thread Pitches: 0.35 to 12 mm >> Weight: approx. 1500 kg >> Engagable Spindle Brake >> Drive Power: 2.0/4.0 kW Lhsdpjvrckqefx Ac Hek >> Length: 2.2 m, Height: 1.5 m, Depth: 1 m Accessories and Equipment: >> 3-axis K&C digital readout, new, 12 months manufacturer’s warranty, with operator manual Functions: Switching mm/inch, Coordinate selection ABS/INC, halving of display value, reference point, tool programming (200 tools), taper calculation, radius/diameter display, quick zeroing, counting direction switch >> 200 mm wedge-bar chuck, nearly new, 1 set of jaws >> Multifix size B with 2 new tool holders >> Bed stop >> Machine mounts >> Coolant system >> LED machine lamp For safety, the machine is equipped with: >> Electronic spindle protection >> Spindle brake >> 2 emergency stop buttons Upon request: Guards for lead and feedscrew About the machine: Offered is a Weiler Commodor lead and feed screw lathe in geometrically overhauled condition. The guides have been newly ground or scraped. Acceptance with inspection protocol. Paint finish: 2K high-gloss white. Multifix and chuck are new. For safety: This machine has a brake motor, electronic spindle protection, and two emergency stop buttons—an as-new condition lathe. The Weiler runs very smoothly even at high spindle speeds. This newer generation of Weiler lathes is extremely user-friendly and can produce ground-like surface finishes. Take the opportunity to inspect this machine under power on site and convince yourself of its condition.

Kondisi: hampir baru (bekas), Fungsionalitas: berfungsi sepenuhnya, Weiler Commodor Lead and Feed Screw Lathe with 3-Axis Digital Display K&C, Fully Refurbished with Inspection Report for New Machine Tolerances Technical Data: >> Machine No. 1824 >> Centre Height: 180 mm >> Centre Distance: 1000 mm >> Spindle Speeds: 13 to 2000 rpm >> Spindle Bore: 56 mm >> Short Taper Spindle Nose DIN 55029 Size 5 >> Tailstock Morse Taper 4 >> Feeds: 0.026 to 0.888 mm/rev >> Thread Types: Metric, Imperial, Module, and Diametral Pitch >> Metric Thread Pitches: 0.35 to 12 mm >> Weight: approx. 1500 kg >> Switchable Spindle Brake >> Drive Power: 2.0/4.0 kW Ljdpfevrcqdsx Ac Hehk >> Length: 2.2 m, Height: 1.5 m, Depth: 1 m Equipment and Accessories: >> K&C 3-Axis Digital Readout, new, with 12-month manufacturer’s warranty and user manual Functions: mm/inch switching, coordinate selection ABS/INC, value halving, reference mark, tool programming for 200 items, taper calculation, radius/diameter display, quick zeroing, count direction reversal >> 200 mm wedge bar 3-jaw chuck, as new, 1 set of jaws >> Multifix size B with 2 new tool holders >> Bed stop >> Machine feet >> Coolant system >> LED machine lamp For safety, the machine is equipped with: >> Electronic spindle protection >> Spindle brake >> 2 emergency stops On request: Covers for lead and feed screws About the machine: Offered is a Weiler Commodor lead and feed screw lathe in geometrically refurbished condition. Guides have been newly ground or hand-scraped. Acceptance with inspection protocol. 2K white gloss paintwork. Accessories (Multifix and chuck) are new. Safety features: The machine has a brake motor, electronic spindle protection, and two emergency stop switches—an absolutely as-new condition lathe. Even at high speeds, the Weiler runs extremely smoothly. This newer generation of Weiler lathes is very user-friendly and can achieve ground-like surface finishes. You are welcome to view and test the machine under power on site to verify its condition.

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Weiler Centre Lathe Model Condor 81 - Lead and Feed Screw Lathe with 3-Axis Heidenhain Digital Readout Technical Data: >> Year of manufacture: 1988 Machine No. 88-955 >> Centre height: 165 mm Lhedpfx Acjxu Hlaj Hok >> Centre distance: 750 mm >> Spindle speeds: from 22 to 2800 rpm >> Spindle bore: 40 mm >> Short taper spindle nose DIN 55027 Size 5 with bayonet lock >> Tailstock taper MK 3 >> Feeds: from 0.015 to 0.46 mm/rev >> Possible threads: metric, imperial, module, and diametral pitch >> Metric thread pitches from 0.18 to 28 mm >> Weight: approx. 1100 kg >> Spindle brake can be engaged >> Dimensions (LxHxD): 1.83 m x 1.29 m x 0.88 m Accessories and Features: >> 3-axis Heidenhain digital readout >> 1 pc new 3-jaw chuck with 2 sets of jaws >> Collet chuck system, collets from 3 to 30 mm, 40 collets (partially duplicate sizes) >> Multifix size B with 3 tool holders >> Bed stop >> Machine feet >> Drill chuck >> Rotating centre Safety Features: >> Lead and feed screw cover >> 2 emergency stop buttons >> Spindle brake About the Machine: Offered here is a used Weiler Condor 81 lathe, year 1988, in very good condition. The machine is fully functional, of course. For safety, the lead and feed screws are equipped with protective covers. A very robust and powerful machine. The 3-axis Heidenhain digital readout makes work even easier and more precise. The machine has been electrically and mechanically checked by us. A complete oil change has been carried out. This newer generation of Weiler lathes is very user-friendly. Take the opportunity to inspect and test this machine under power at our premises.

Kondisi: hampir baru (bekas), Fungsionalitas: berfungsi sepenuhnya, Weiler Praktikant 160B Precision Centre Lathe with 3-Axis K&C Digital Readout, NEW. Overhauled, including acceptance protocol certifying new-machine tolerances. Technical Specifications: >> Machine No.: 87 160 760 >> Centre height: 160 mm >> Distance between centres: 650 mm >> Spindle speeds: 24 to 2,500 rpm >> Spindle bore: 40 mm >> Short taper spindle nose DIN 55027, size 5, with bayonet lock >> Tailstock: Morse taper 3 >> Feeds: 0.02 to 0.63 mm/rev >> Thread cutting: metric, imperial, module, and diametral pitch >> Metric thread pitches: 0.25 to 8 mm >> Weight: approx. 680 kg >> Electrically selectable spindle brake Ledpfx Aevrdlcoc Hohk >> Dimensions (LxHxW): 1.6 m x 1.25 m x 0.7 m Equipment & Accessories: >> New 3-axis digital readout from K&C, 12-month manufacturer's warranty, incl. operation manual Functions: mm/inch switching, ABS/INC coordinate selection, display value halving, reference mark, tool memory for 200 tools, taper calculation, radius/diameter display, quick zeroing, selectable count direction >> New collet chuck, NEW collets 3–25 mm in 1 mm increments >> New 160 mm 3-jaw chuck with 2 sets of jaws >> Multifix tool post size A, with 3 steel holders >> Electronic spindle guard >> NEW LED machine lamp >> NEW machine mounts >> Splash guard >> Operating manual and spare parts plan (PDF) About the Machine: Offered is a Weiler Praktikant 160 B engine lathe with leadscrew and feedscrew, reconditioned to toolroom accuracy and fully geometrically overhauled, including an acceptance protocol confirming new-machine tolerances. Safety features: electronic spindle guard, covers for leadscrew and feedscrew, 2 emergency stop buttons, and a braking motor. This latest generation of Weiler lathes is highly user-friendly and enables ground-like surface finishes. Take the opportunity to inspect and test the machine under power onsite to verify its condition.

Kondisi: sangat baik (bekas), Tahun pembuatan: 1992, Weiler Condor 81 Weiler Condor 81 Lathe with Heidenhain Digital Readout, Year of Manufacture 1992, in Very Good Original Condition The machine comes from the training workshop of a renowned German mechanical engineering company. Technical Data: Year of manufacture: 2003 Engine Lathe WEILER Type Condor 81 Centre distance: 750 mm Swing over bed: 330 mm Centre height over bed: 165 mm Swing over cross slide: 180 mm Centre height over cross slide: 90 mm Spindle bore: 40 mm Chuck mounting: short taper DIN 55027 size 5 Tailstock taper: MK 3 Quill stroke: 110 mm Spindle speed: 45 - 2800 rpm, 16 steps Drive power: 3 kW Power supply: 400 Volt, 50 Hz Spindle speed via 16-speed gearbox Required space (L x W x H): 1850 x 950 x 1400 mm Weight: 1100 kg Accessories and Equipment: Ledpfx Asw T U Sgsc Hohk Röhm 3-jaw chuck Multifix quick-change tool post Coolant system Heidenhain digital readout About this machine: We are offering a Weiler Condor 81 lathe with Heidenhain digital readout, year of manufacture 1992, in very good condition. The machine is, of course, fully functional. The slides move very smoothly and evenly. Even at high speeds, the Weiler runs extremely quietly. This newer generation of lathes is very user-friendly and allows surfaces to be produced with a ground-like finish. Take the opportunity to view the machine on site under power and see the condition for yourself. You will find further lathes from renowned manufacturers on our website.

Kondisi: diremajakan ulang (bekas), Fungsionalitas: berfungsi sepenuhnya, lubang spindel: 40 mm, tinggi pusat: 165 mm, lebar di tengah: 750 mm, gores kuas bulu: 85 mm, panjang total: 1.800 mm, lebar total: 1.300 mm, kecepatan spindel (maks.): 2.800 rpm, kecepatan spindel (min.): 22 rpm, berat keseluruhan: 1.100 kg, Kepada Bapak/Ibu yang terhormat, Kami menawarkan untuk dijual mesin bubut dengan panduan dan spindel tarik tipe Weiler Condor B yang telah direkondisi secara menyeluruh! Model ini sangat menonjol karena kemudahan pengoperasiannya serta rasio yang sangat baik antara ruang yang dibutuhkan dan tinggi/jarak antar pusat. Condor B berada dalam kisaran ukuran antara Weiler Praktikant dan Weiler Commodor, sehingga merupakan mesin serbaguna yang ideal untuk setiap bengkel. Mesin ini akan direkondisi secara menyeluruh di bengkel kami, sehingga secara teknis dan visual akan tampak seperti baru! Berikut adalah pekerjaan yang akan dilakukan selama proses rekondisi: - Pembersihan menyeluruh - Pengecatan ulang - Perbaikan rel panduan - Penggantian semua pelumas - Penggantian semua komponen standar seperti pegangan, tombol, sekrup, dll. - Penggantian semua komponen yang aus seperti sabuk, rantai, wiper, dll. Ljdjztf A Ujpfx Ac Hshk - Penggantian semua komponen elektronik seperti kontaktor, trafo, sakelar, dll. - Dokumentasi dengan protokol pengujian, daftar suku cadang, dan protokol geometri Ketersediaan: sesuai permintaan Tinggi antar pusat: 165mm Jarak antar pusat: 750mm Diameter lubang spindel: Ø 40mm Dudukan tirus kepala tetap: MK3 Dudukan chuck: kerucut pendek DIN55027 Uk.5 dengan pengunci bayonet Langkah pinol: 85mm Kecepatan putaran: 22-2800 RPM Jenis ulir yang mungkin: Metrik, inci, modul, diametral pitch Pitch ulir metrik: 0,18 - 28mm Rem spindel: dapat diaktifkan Tegangan: 400V Dimensi: sekitar 1,80x1,30x0,9m (PxLxT) Berat: sekitar 1100kg Peralatan dan aksesori tambahan: pelindung chuck (BARU), sistem pendingin, 2x tombol darurat, pelindung panduan dan spindel tarik (opsional), tampilan digital K+C BARU (opsional), manual pengoperasian, dokumen teknis, sesuai permintaan, banyak lagi... Janji layanan kami kepada Anda: - Kami adalah bengkel bersertifikat di bidang teknik mesin - Semua mesin akan diperiksa di bengkel, minimal. - Semua pelumas dan komponen yang mungkin aus akan diganti terlebih dahulu - Sesuai permintaan, kami akan merekondisi mesin yang Anda pilih secara menyeluruh atau sebagian - Sesuai permintaan, kami akan mengecat ulang mesin yang Anda pilih dengan warna yang Anda inginkan - Sesuai permintaan, Anda dapat memesan aksesori tambahan seperti peralatan, dll. secara langsung - Sesuai permintaan, kami dapat memasang aksesori tambahan seperti peralatan keselamatan, dll. - Kami akan dengan senang hati mengurus pengiriman dan/atau pemasangan

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, lubang spindel: 40 mm, tinggi pusat: 165 mm, lebar di tengah: 750 mm, Dear Sir or Madam, We are offering for sale a Weiler Condor B lathe. This model is particularly notable for its user-friendly operation and an excellent ratio of footprint to center height/center distance. The Condor B is positioned in size between the Weiler Praktikant and the Weiler Commodor, making it a true all-rounder in any workshop. The machine undergoes a comprehensive partial overhaul in our workshop, ensuring both excellent technical condition and visual appearance. All guideways are in good order, the gearboxes run quietly, and the levers operate smoothly. You are welcome to inspect the machine on site to verify its condition. Availability: On request Centre height: 165mm Centre distance: 750mm Spindle bore: Ø 40mm Tailstock taper: MT3 Chuck mounting: Short taper DIN55027 size 5 with bayonet lock Quill travel: 85mm Spindle speeds: 22-2800 rpm Possible thread types: Metric, Whitworth, Module, Diametral Pitch Metric thread pitches: 0.18 - 28mm Spindle brake: switchable Voltage: 400V Dimensions: approx. 1.80x1.30x0.9m (LxHxW) Weight: approx. 1100kg Additional features and accessories: 3-axis digital readout K+C (NEW), chuck guard (NEW), coolant system, 2x emergency stop, leadscrew and feed shaft cover (optional), operating manual, and much more available upon request… Our service promise to you: - We are a certified master workshop in mechanical engineering - All machines are at least workshop-inspected - All lubricants and, if necessary, worn parts are replaced beforehand Lhodpfxsw N Np Se Ac Hsk - Upon request, we can fully or partially overhaul the selected machine - Upon request, we can repaint the selected machine in your desired color - Upon request, you can order additional accessories such as tools - Upon request, we can fit additional accessories such as safety devices - We are happy to arrange shipping and/or installation

Kondisi: sangat baik (bekas), Tahun pembuatan: 2017, - Aksesori tersedia - Tampilan digital WEILER VCPlus AREA KERJA Tinggi puncak 180 mm Diameter putaran di atas meja 360 mm Diameter putaran di atas eretan 190 mm Jarak antar puncak 800 mm SPINDEL Kepala spindel DIN 55027/DIN ISO 702-3 Ukuran 6 Lubang spindel 57 mm Diameter spindel di bantalan depan 90 mm PENGGERAK UTAMA Daya penggerak 60 %/100 % ED – / 10,5 kW Rentang kecepatan 25 – 4.000 rpm Lsdpfx Aezu I Amsc Hjhk Jumlah kecepatan, dapat disesuaikan secara terus-menerus RENTANG UMPAN Jumlah, dapat disesuaikan secara terus-menerus Lurus 0,01 – 6 mm/putaran Melintang 0,003 – 2 mm/putaran RENTANG PEMOTONGAN ULIR Ulir metrik 0,1 – 20 mm PENAHAN Diameter pinol 50 mm Langkah pinol 110 mm Kerucut dalam DIN 228 MK 3 BERAT Mesin 1400 kg DIMENSI Panjang / Lebar / Tinggi 2000 x 970 x 1730 mm

Kondisi: baik (bekas), Tahun pembuatan: 1988, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 1105, lubang spindel: 48 mm, tinggi pusat: 170 mm, panjang total: 1.800 mm, lebar total: 900 mm, tinggi total: 1.600 mm, kecepatan spindel (maks.): 2.800 rpm, kecepatan spindel (min.): 22 rpm, berat keseluruhan: 1.500 kg, tegangan masuk: 380 V, frekuensi input: 50 Hz, WEILER CONDOR B – Mesin Bubut dengan Spindel Pemandu dan Spindel Penarik Ljdpfx Aoztwwkec Hjhk - Daya: 4 kW - Arus nominal: 9,5 A - Panjang antar pusat: sekitar 900 mm - Tinggi antar pusat di atas alas: sekitar 170 mm - Diameter bubut di atas alas: sekitar 340 mm - Tinggi antar pusat di atas penyangga: sekitar 90 mm - Diameter bubut di atas penyangga: sekitar 180 mm - Diameter lubang spindel: sekitar 48 mm Mesin ini dilengkapi dengan kepala tetap, dudukan pahat bubut Multifix, serta tampilan digital dari produsen ACU-RITE. Mesin ini berasal dari bengkel pelatihan, oleh karena itu spindel pemandu dan spindel penarik tertutup. FCA D-73235 Weilheim Teck – dimuat di atas truk.

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Diameter batang (maks.): 40 mm, tinggi pusat: 165 mm, WEILER CONDOR VS 2 -Ketepatan “Baik” -Tinggi tengah 165 mm -Diameter putaran di atas meja 330 mm -Jarak antar tengah 800 mm -Rentang kecepatan putaran 28-2800 RPM -Umpan otomatis untuk gerakan memanjang/melintang Lhedpjzvy T Tofx Ac Hok -Diameter lubang spindel 40 mm -Ulir / Metrik / Inci, dll. -Collet - Sistem penjepit cepat termasuk collet -Chuck tiga rahang -Pelat datar -Multifix dengan sisipan -Tombol berhenti darurat -Dokumentasi

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1993, Fungsionalitas: berfungsi sepenuhnya, Mesin Bubut L & Z WEILER CONDOR B, termasuk tampilan digital tiga sumbu -Tanda CE -Mesin dari lembaga pendidikan / sangat terawat -Tinggi antara titik 165mm -Diameter putaran di atas dudukan 330mm -Diameter putaran di atas meja geser 185mm -Panjang bubut 800mm -Kecepatan putar spindel 22 - 2800 RPM -Umpan otomatis / umpan melintang & membujur -Ulir / Metrik / Inci, dll. -Lubang untuk batang 40mm -Pusat bor / dudukan pin MK 3 -Dudukan dasar Multifix & sisipan -Cekam tiga rahang 200mm -Pelindung cekam elektrik -Pelindung spindel -2x Tombol berhenti darurat -Sistem pendingin -Pelindung serpihan -Dokumentasi Lhjdpfozvx A Tox Ac Hjk Dimensi: PxLxT 1,8x0,8x1,6 meter / Berat 1200 kg Kesalahan dan perubahan dapat terjadi.

Kondisi: baik (bekas), Tahun pembuatan: 1989, 1 mesin bubut dan pembuat ulir bekas Merek: Weiler Tipe: Condor B Tahun Pembuatan: 1989 Data Teknis: Jarak antar pusat: 750 mm Tinggi antar pusat: 165 mm Diameter lubang spindel: 40 mm Kecepatan putar: 22 – 2800 RPM Kon dengan lubang tirus: MK 3 Daya penggerak: 1,6 / 3,2 kW Berat: 1040 kg Dimensi: 1.850 x 880 x 1.290 mm Lhjdpfx Acezuthhj Hjk Dilengkapi dengan: Tampilan digital 3 sumbu Perangkat penjepit collet dengan tuas Pelindung chuck

Kondisi: siap digunakan (bekas), Mesin Bubut L & Z WEILER Condor -Panduan "Baik" -Layar digital 3 sumbu (opsional) -Tinggi senter 165 mm -Diameter putaran di atas meja 330 mm -Jarak antar senter 800 mm -Rentang kecepatan putaran 28-2800 RPM -Umpan otomatis untuk gerakan memanjang/melintang -Diameter lubang spindel sekitar 40 mm -Ulir / Metrik / Inci, dll. -Collet / Sistem penjepitan cepat, termasuk 20 x collet -Chuck 3 rahang -Multifix dengan sisipan -Pelindung serpihan Lhjdpjztfiuefx Ac Hjk -Chuck bor / Senter yang berputar bersama -Sistem pendingin -Tombol berhenti darurat / Hidup/Mati -Dokumentasi Dimensi: PxLxT 2x0,8x1,6 meter / Berat 850 Kg

Kondisi: siap digunakan (bekas), Mesin Bubut L & Z WEILER Condor -Panduan dalam kondisi "Baik" -Opsi: Tampilan digital 3 sumbu -Tinggi tengah 165 mm -Diameter putaran di atas meja 330 mm -Jarak antara ujung 800 mm -Rentang kecepatan putaran 28-2800 RPM -Umpan otomatis untuk gerakan memanjang/melintang -Diameter lubang spindel sekitar 40 mm -Ulir / Metrik / Inci, dll. -Chuck - Sistem penjepitan cepat -Chuck empat rahang -Dudukan dan sisipan Multifix -Pelindung chuck -Sistem pendingin -Tombol berhenti darurat / Mati Lodpfozta Dmox Ac Hohk -Dokumentasi Dimensi: Panjang x Lebar x Tinggi 2,0 x 0,8 x 1,6 meter / Berat 850 kg

Kondisi: bekas, Tahun pembuatan: 1996, Mesin bubut Weiler dengan spindle utama dan spindle penggerak Tipe/Model Condor AC Kondisi Bekas Tahun produksi 1996 Data Teknis Tinggi pusat: 165 mm Jarak antar pusat: 750 mm Diameter ayun di atas tempat tidur: 330 mm Diameter ayun di atas carriage: 180 mm Lubang spindle: Ø 40 mm Kecepatan spindle (variabel): 22 - 2.800 rpm Kepala spindle: DIN 55027 ukuran 5 (ujung kerucut pendek) Daya penggerak: 5,5 kW Tailstock dan feeding Taper tailstock: MK 3 Stroke pinole: 110 mm Rentang feed otomatis, longitudinal dan melintang: sekitar 0,016 - 0,50 mm/putaran Rentang ulir Cocok untuk ulir metrik dan ulir inci: sekitar 0,20 - 28 mm Dimensi (PxLxT): sekitar 2000 mm x 860 mm x 1600 mm Berat sekitar: 1.100 kg Perlengkapan: Lhsdozfgupjpfx Ac Hjk - Pemegang cepat sistem Multifix, 1 insert ukuran A - Penyetop tempat tidur - Unit pendingin - Pelindung chuck dengan saklar akhir - Perangkat collet, dengan pengaman saklar akhir Biaya pengiriman oleh ekspedisi hingga trotoar lihat di keranjang belanja atau untuk permintaan khusus dapat ditanyakan dalam penawaran individual.

Kondisi: bekas, Tahun pembuatan: 1992, Weiler mesin bubut poros utama dan tarikan Tipe / Model: Condor B Kondisi: Bekas Tahun pembuatan: 1992 Data teknis Tinggi senter: 165 mm Jarak antara senter: 750 mm Diameter ayun di atas alas: 330 mm Diameter ayun di atas eretan: 180 mm - 185 mm Spindel utama dan penggerak Kisaran putaran: 22 - 2800 rpm Lubang spindel: 40 mm Kepala spindel: DIN 55027 / Ukuran 5 (dengan pengunci bayonet) Daya penggerak: 3,2 kW Pemajuan dan pemotongan ulir Lhedpfszfhgtox Ac Hjk Pemajuan memanjang: 0,016 - 0,8 mm/putaran Pitch ulir metrik: 0,18 - 28 mm Senter belakang Tirus dalam pinol: MK 3 Jarak gerak pinol: 110 mm Dimensi (P/L/T) kira-kira: 2000 mm x 860 mm x 1600 mm Bobot kira-kira: 1.100 kg Biaya pengiriman oleh ekspedisi hingga tepi jalan dapat dilihat di keranjang belanja atau dalam penawaran individual untuk produk permintaan.

Kondisi: bekas, Tahun pembuatan: 1982, Fungsionalitas: berfungsi sepenuhnya, Mesin bubut Weiler Condor VS2, tahun pembuatan 1982, dengan chuck tiga rahang, sistem Multifix, dan perlengkapan penjepit dengan satu set penjepit. Mesin dalam kondisi baik dan siap digunakan. Setelah kesepakatan, mesin dapat didemonstrasikan dalam kondisi menyala. Lhjdozq R Anopfx Ac Hjk

Kondisi: bekas, Diameter bubut di atas alas 330 mm Diameter bubut di atas penyangga 170 mm Panjang bubut 800 mm Rentang kecepatan putar 24 - 2800 RPM Diameter lubang spindel 38,0 mm Tinggi antara puncak 155 mm Dudukan sesuai DIN 55022 Total kebutuhan daya 3,0 kW Berat mesin sekitar 850 kg Luas yang dibutuhkan sekitar 1,9 x 0,7, Tinggi: 1,3 m Peralatan: - Mesin bubut dengan spindel penggerak/penarik yang kokoh - Chuck tiga rahang RÖHM Ø 160 mm - Pelindung chuck yang dapat dilipat - Kunci chuck Ljdpfszlkwhsx Ac Hshk - Penyangga baja Multifix - Penyangga geser - Umpan otomatis untuk penyangga atas dan penyangga datar - Rangka dasar mesin, dengan pintu lemari (ruang penyimpanan) - Tombol darurat

Kondisi: siap digunakan (bekas), Mesin Bubut L & Z WEILER CONDOR VS, termasuk tampilan digital RSF -Tinggi tengah 165 mm -Diameter putaran di atas landasan 330 mm -Jarak antar pusat 800 mm -Rentang kecepatan putaran 28 - 2800 RPM -Umpan otomatis untuk gerakan memanjang/melintang -Diameter lubang spindel sekitar 38 mm -Ekor mesin -Tampilan digital RSF -Penyangga dasar Multifix dengan sisipan -Cekam tiga rahang & rahang pengganti -Cekam collet / sistem penjepitan cepat, termasuk cekam collet -Cekam bor / ujung yang berputar bersama -Penyangga landasan -Pelindung serpihan Lhodjzn Rahepfx Ac Hek -Sistem pendingin -Tombol darurat / mati -Dokumentasi Dimensi: PxLxT 2x0,8x1,6 meter / Berat 900 kg Kesalahan dan perubahan dapat terjadi.

Kondisi: siap digunakan (bekas), de-hu-001 Lhsdoxmaktepfx Ac Hok

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1996, Fungsionalitas: berfungsi sepenuhnya, Weiler Condor B universal lathe in excellent condition, ex-educational use, equipped with new 3-axis digital readout and accessories. Original paintwork. Lhsdpfjyuyruex Ac Hsk Machine no. 96-2374 with CE certification. Technical data: - Year of construction: 1996 - Machine number: 96-2374 - Centre height: 165 mm - Distance between centres: 750 mm - Spindle speeds: from 22 to 2800 rpm - Spindle bore: 40 mm - Spindle nose: DIN 55027-5 with bayonet locking - Tailstock taper: MK 3 - Feeds: from 0.016 to 0.5 mm/rev - Possible threads: metric, inch, module, and diametral pitch - Metric thread pitch from 0.18 to 28 mm - Weight approx. 1100 kg - Switchable spindle brake - Required space: LxWxH 183 x 88 x 129 cm Accessories and equipment: - 3-jaw steel chuck Rhom - New 5C collet set, 1–28 mm in 0.5 mm increments, with new draw tube - New drill chuck 1–13 mm - Multifix quick-change toolpost with 4 steel holders - Bed stop - New live centre - Change gears - Faceplate - Coolant system - Chip guard - Spindle guard with emergency stop - German machine manual