Beli Weiler Primus Vcd bekas (260)

Kondisi: sangat baik (bekas), Tahun pembuatan: 2017, 84015c67 Hodpjy Ti Ikjfx Agkenn

Kondisi: baru, en-001 Hnodpfxetznarj Agkon

Kondisi: siap digunakan (bekas), en001 Hnedpszbc Dtjfx Agksn

Kondisi: siap digunakan (bekas), Turn length 450 mm Swing diameter over bed 245 mm Swing diameter over cross slide 135 mm Spindle bore 23.0 mm Mount DIN 55021-4 Tailstock quill: 2 MT Quill travel 80.0 mm Spindle speed 60 - 3000 rpm Bed width 155 mm Total power requirement 1.2 / 1.5 kW Voltage 380 V Machine weight approx. 340 kg Dimensions L x W x H 1200 x 650 x 1330 mm From a vocational school (!) Especially suitable for precision turned parts The Primus series is the most compact precision centre lathe (engine lathe) from WEILER. It is considered a suitable machine for precise work in confined spaces in toolmaking, laboratories, and training workshops. The machine is built for extremely tight tolerances. The hardened and ground machine bed ensures maximum vibration damping and durability. Equipment: - Robust centre lathe with leadscrew and feedshaft - 2-axis digital readout "D60-2V" - 3-jaw chuck - Swiveling chuck guard - Chuck key - MULTIFIX toolpost with 3 holders - Sliding tailstock Hnodpfx Aszbc Daegken - Control panel, front left - Infinitely variable feeds for longitudinal and cross slide - Pole-changing drive motor - Machine base - Rear chip and splash guard - Additional accessories such as collet chuck + collets, etc. - Emergency stop button on the front

Kondisi: hampir baru (bekas), Tahun pembuatan: 2013, Fungsionalitas: berfungsi sepenuhnya, Weiler Praktikant VCD Precision Lathe Manufacturer: Weiler Model: Praktikant VCD Precision Lathe Year of manufacture: 2013 Condition: used, excellent, like new, no signs of wear, includes new maintenance and measurement protocol before sale Centre distance: 650 mm Centre height: 160 mm Swing diameter over bed: 320 mm Swing diameter over cross slide: 190 mm Cross slide travel: 150 mm Top slide travel: 110 mm Swivel range of top slide: +/-65° Bed carriage guide length: 350 mm Bed width: 205 mm Tool section (height x width): 20 x 20 mm Height from top slide to turning centre: 30 mm Spindle nose according to ISO DIN 702-3 (DIN55027) Size 5 Hjdpoy Ti Siefx Agksnn Spindle diameter at front bearing: 70 mm Spindle bore: 43 mm Headstock spindle internal taper: Metric 50 Drive power: 6 kW Speed range: 30 – 4000 rpm Number of gear stages: 1 Number of speeds: stepless Number of feeds: 24 Longitudinal: 0.02 – 0.63 mm/rev Face: 0.006 – 0.2 mm/rev Quill diameter: 40 mm Quill stroke: 85 mm Quill internal taper: 3 MT Weight without packaging and accessories: approx. 1150 kg Length / Width / Height, net: 1720x890x1700 mm Headstock / Rear panel / Sliding safety cover: Light grey RAL 7035 Machine base / Machine bed: Basalt grey RAL 7012 Display housing: Blue NCSS 4550-R80B

Kondisi: hampir baru (bekas), Tahun pembuatan: 2021, Fungsionalitas: berfungsi sepenuhnya, Weiler Praktikant VCD Precision Lathe (2021) Manufacturer: Weiler Model: Praktikant VCD Precision Lathe Year of Manufacture: 2021 Condition: Used, very good, as new; includes new service and measurement protocol prior to sale Hedey Ti Nujpfx Agkenn Centre distance: 650 mm Centre height: 160 mm Swing diameter over bed: 320 mm Swing diameter over cross slide: 190 mm Cross slide travel: 150 mm Top slide travel: 110 mm Top slide swiveling range: +/-65° Bed carriage guide length: 350 mm Bed width: 205 mm Tool shank cross-section (height x width): 20 x 20 mm Height from top slide to turning centre: 30 mm Spindle nose to ISO DIN 702-3 (DIN55027) Size 5 Spindle diameter at front bearing: 70 mm Spindle bore: 43 mm Main spindle internal taper: Metric 50 Drive power: 6 kW Speed range: 30 – 4000 rpm Number of gearbox stages: 1 Number of spindle speeds: stepless Number of feeds: 24 Longitudinal feed: 0.02 – 0.63 mm/rev Cross feed: 0.006 – 0.2 mm/rev Quill diameter: 40 mm Quill stroke: 85 mm Quill internal taper: 3 Morse taper Weight, without packaging and accessories: approx. 1,150 kg Length / Width / Height, net: 1720 x 890 x 1700 mm Headstock / Rear panel / Sliding safety guard: Light Grey RAL 7035 Machine base / Bed: Basalt Grey RAL 7012 Digital display housing: Blue NCSS 4550-R80B

Tahun pembuatan: 1986, Kondisi: bekas, Weiler Primus lathe, year of manufacture approx. 1986, three-jaw chuck, Multifix toolpost. The machine is in good condition and can be demonstrated under power by prior arrangement. Hodpjn Ard Dsfx Agkenn

Kondisi: diremajakan ulang (bekas), Tahun pembuatan: 2007, Universal lead and feed screw lathe Make: WEILER Model: Primus VC Year of manufacture: 2007 – overhauled Newly painted in RAL 7035 light grey Machine no.: CK17 Centre height: 140 mm Centre distance: 500 mm Spindle bore: 40 mm With warranty Hedpfx Agov D Ip Noksnn Geometric inspection with test report Accessories: - 3-axis digital readout SIEMENS - Chuck guard with electrical interlock - Braked drive motor - Quick-change tool post, base body size A - Bed stop - Covered lead and feed screw - Chip guard to the rear - Removable chip tray - Operating manual - Used, as seen -

Kondisi: siap digunakan (bekas), WEILER PRIMUS / MD-G / Mesin Bubut Mekanik - Ketinggian senter: 125 mm - Jarak antara senter: 400 mm - Rentang kecepatan putar: 40-3000 rpm - Lubang spindle: 24 mm Hedpfx Agjy Sm Dtekonn - Pelindung chuck elektrik - Dudukan dasar Multifix dengan sisipan - Ekor dengan pinol bor - Chuck empat rahang - Lampu kerja - Stopper meja - Dokumentasi Ukuran (PxLxT): 1,3×0,8×1,6 meter / Berat: 450 kg Kesalahan dan kekeliruan dalam input dapat terjadi.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2004, Weiler Primus VC Lathe Primus VC with Heidenhain Digital Readout, Year of Manufacture 2004, in Very Good Original Condition The machine comes from the prototype workshop of a renowned German mechanical engineering company. CE compliant!! Technical Data: Year of Manufacture: 2004 Weiler Primus VC Centre Height: 140mm Centre Distance: 500mm Spindle Bore: Ø 40mm Tailstock Taper: MT3 Quill Stroke: 85mm Thread Types: Metric, Inch, Module, Diametral Pitch Metric Thread Pitches: 0.25 - 8mm Spindle Brake: Switchable Voltage: 400V Dimensions: approx. 1.50x1.00x1.50m (LxHxW) Weight: approx. 700kg Additional Equipment and Accessories: Heidenhain control panel, chuck guard, leadscrew and feed shaft cover, emergency stop, operating manual, CE declaration of conformity Hedpfx Aoy I U Dyegkonn About the Machine: The Weiler Primus VC is the smallest model in the Weiler range. The Weiler Primus VC is a lathe for highest requirements: with stepless speed control, constant cutting speed and an impressive 4 kW drive power (40% duty cycle). This small but high-class lathe is used wherever top precision is needed in minimum space: such as in optical, electrical and automotive workshops, in laboratories, and even in Formula 1. Offered here is a Weiler Primus VC lathe with Heidenhain digital readout, year of manufacture 2004. This lathe is in very good original condition. It previously came from a facility and was only lightly used for prototyping. The control unit is very user-friendly. The ways are regularly lubricated via central lubrication. The Weiler Primus VC has been mechanically and electrically tested by us. Take the opportunity to view and test the Weiler Primus VC under power at our site. You can find more lathes from renowned manufacturers on our website.

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Mesin bubut Weiler Primus dalam kondisi sangat baik. Dapat dilihat dalam keadaan teraliri listrik. Data teknis: Jarak antara titik pusat: 450 mm Tinggi titik pusat: 120 mm Hedpfxex Htf He Agkjnn Lubang spindel: 23 mm Kecepatan putar: 30 – 3000 rpm Ekor tetap: MK 2 Daya penggerak: 1,5 kW Berat: 350 kg Dimensi: 1200 x 650 x 1550 mm Harga dikurangi!

Kondisi: hampir baru (bekas), Weiler Primus Kondisi sangat baik! Dengan aksesori Hnodpfx Agsyy Ngtsken

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1989, Fungsionalitas: berfungsi sepenuhnya, For sale: Lathe manufactured by Weiler, model Primus LZ-GS The machine is in very good condition. Technical specifications: - Year of manufacture: 1989 - Machine No.: 4443 - Operating voltage: 380 V - Centre height: 120 mm - Centre distance: 430 mm - Spindle speed: 60 - 3000 rpm, 18 gear steps - Spindle bore: 23 mm - Short taper spindle nose DIN 55027 - Tailstock Morse taper 2 - Feed rates: 0.03 to 0.15 mm/rev - Thread cutting: Metric, imperial, module, and diametral pitch - Metric thread pitch: 0.25 to 2.5 mm - Length: 1.2 m, Height: 1.3 m, Depth: 0.65 m Prices plus VAT Inspection possible by appointment. Please contact us—our team is pleased to assist you. Trade-in or exchange possible! Machinery Purchase / Sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MORE. Are you looking for a high-quality yet affordable metalworking machine for your production facility, or do you want to sell yours? Hnedpfx Ageihig Ijken For more information or contact options, visit our website.

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Weiler Primus Lead and Feed Shaft Bench Lathe in Excellent Condition!!! Technical Data: >> Machine No. 2801 >> Centre Height: 120 mm >> Centre Distance: 430 mm >> Speed Range: 60 – 3000 rpm in 18 gear steps Hnodpfxev Tyzco Agksn >> Spindle Bore: 23 mm >> Short Taper Spindle Nose DIN 55027 >> Tailstock MT 2 >> Feeds from 0.03 to 0.15 mm/rev >> Thread cutting options: Metric, Inch, Module, and Diametral Pitch >> Metric thread pitches from 0.25 to 2.5 mm >> Dimensions: Length 1.2 m, Height 1.3 m, Depth 0.65 m Accessories and Equipment: >> 1 piece Röhm 3-jaw chuck 125 mm with 4 sets of jaws >> Collet clamping device with collets from 2 mm to 12 mm in 1 mm increments with draw tube >> Multifix size A with 4 tool holders >> Change gears >> Fixed steady >> Faceplate >> Spindle guard >> Clamping tools About the Machine: For sale is a Weiler Primus lead and feed shaft bench lathe in very good condition. The machine is, of course, fully functional. All slides run very smoothly and evenly. Even at high speeds, the Weiler runs quietly. The Primus comes from a government-operated facility where it saw little use. This newer generation of Weiler lathes is very operator-friendly and allows for ground-like surface finishes. Take the opportunity to inspect this machine under power on site and see its condition for yourself. (The base cabinet is included; it is not bolted to the machine.) Digital readout available at extra cost.

Kondisi: bekas, Swing diameter over bed: 250 mm Swing diameter over cross slide: . mm Distance between centers: approx. 400 mm Center height: approx. 125 mm Spindle speed range: 80 – 3,000 rpm Number of speed steps: 18 Spindle bore: 24 mm Tailstock quill taper: MT 3 Weight: approx. 400 kg Dimensions (L x W x H): approx. 1,200 x 650 x 1,300 mm Four-jaw chuck diameter: 125 mm Including Röhm four-jaw chuck, Ø 125 mm with drilling and turning jaws; Hnodpfswa Dz Esx Agkjn Collet chuck device incl. collets 1–20 mm in 1 mm increments; Multifix size A with 3 quick-change tool holders; Chuck guard with safety interlock

Kondisi: bekas, Tahun pembuatan: 1999, Turning diameter 150 mm Turning length 500 mm Total power requirement 4 kW Machine weight approx. 0.8 t O F F E R We can offer you, subject to prior sale and errors excepted, ex stock and without obligation: W E I L E R LZS - Universal Lathe with Digital Readout Model: PRIMUS VC Year of manufacture: 1999 _____ Center height: 140 mm Max. turning diameter over cross slide: 150 mm Max. swing diameter over bed: 280 mm Distance between centers: 500 mm Spindle bore: 40 mm Infinitely variable speed: 30 - 4,000 rpm 24 longitudinal feeds: 0.02 - 0.63 mm/rev 24 facing feeds (longitudinal feeds x 8): 0.006 - ... mm/rev Metric threads: mm/pitch Hnsdpfx Agjvm Dv Dskon Imperial threads: 80 - 2 tpi Module threads: Module Spindle drive: 1.5 kW Total drive: 4 kW - 380 V - 50 Hz Weight: 800 kg Accessories / Special features: • SIEMENS 3-axis digital display for X-axis, Z-axis, and compound (summed Z-axis) • Multifix-A quick-change tool holder • Equipped with a 3-jaw chuck from WEILER, 140 mm diameter, mounted • Machine base for tool storage with integrated electrical cabinet, coolant system • Operating manuals Condition: Very good – demonstration ready. Ideal for training workshops. Delivery: ex stock – as inspected Payment: strictly net upon collection after receipt of invoice We look forward to your order. Further lathes of all sizes are available from stock – please contact us for more information.

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Weiler Primus LZ/G Lead and Feed Screw Lathe in Special Light Grey Paint Finish!!! Technical Data: >> Year of manufacture: approx. 1990, Machine No. 3150 >> Center height: 120 mm >> Distance between centers: 430 mm >> Spindle speed: 60 - 3000 rpm in 18 geared steps >> Spindle bore: 23 mm >> Short taper spindle nose according to DIN 4 >> Tailstock Morse Taper 2 (MT2) >> Feeds from 0.03 to 0.15 mm/rev >> Thread cutting: Metric, Inch, Module, and Diametral Pitch threads possible >> Metric pitch range: 0.25 to 2.5 mm >> Switchable spindle brake >> Weight: approx. 360 kg >> Dimensions: Length 1.2 m, Height 1.3 m, Depth 0.65 m Accessories and Equipment: Hjdpfx Agevivmyokenn >> 1 new 3-jaw chuck, 125 mm, with 2 sets of jaws >> Multifix size A with 2 tool holders >> New collet chuck system with collets from 3 to 26 mm, in 1 mm increments (new) About the Machine: Offered here is a Weiler Primus lead and feed screw lathe in very good condition. The machine is, of course, fully functional. The slides run smoothly and evenly. The bedways are in very good condition. The Primus was used in a training workshop. This newer generation of Weiler lathes is highly user-friendly and allows for producing ground-like surface finishes. Take the opportunity to inspect this machine under power on-site and convince yourself of its condition.

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Weiler Primus Lead and Feed Screw Lathe from Training Workshop!!! Technical Data: >> Year of manufacture: approx. 1985 >> Centre height: 120 mm >> Distance between centres: 430 mm >> Spindle speeds: 60 - 3000 rpm in 18 geared steps >> Spindle bore: 23 mm >> Short taper spindle nose KK4 DIN 55027 >> Tailstock MK 2 >> Feeds from 0.03 to 0.15 mm/rev >> Possible threads: metric, imperial, module, and diametral pitch >> Metric thread pitches from 0.25 to 2.5 mm Hsdsu Aftgopfx Agksnn >> Weight approx. 360 kg >> Length 1.2 m, Height 1.3 m, Depth 0.65 m Accessories and Equipment: >> 1 piece 160 mm 3-jaw chuck with 1 set of jaws >> 1 piece new 125 mm 3-jaw chuck with 2 sets of jaws >> Collet attachment with collets from 1 mm to 20 mm in 1 mm increments >> Multifix size A with 3 tool holders >> Stop >> Change gears About the machine: For sale is a Weiler Primus lead and feed screw lathe in very good condition. The machine is, of course, fully functional. All slides move very smoothly and evenly. Even at high speeds, the Weiler runs quietly. The Primus was located in a training workshop. This newer generation of Weiler lathes is very user-friendly and allows for surfaces to be produced as if ground. Take the opportunity to inspect this machine under power on site and see its condition for yourself.

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Weiler Primus Lead and Feed Screw Lathe from Training Workshop!!! Hsdpjvtp Edofx Agksnn Technical Data: >> Year of manufacture: approx. 1985, Machine No. 1191 >> Centre height: 120 mm >> Distance between centres: 430 mm >> Spindle speed: 60 - 3000 rpm, 18 gear stages >> Spindle bore: 23 mm >> Short taper spindle nose KK4 DIN 55027 >> Tailstock: MT 2 >> Feeds: 0.03 to 0.15 mm/rev >> Thread cutting: metric, imperial, module, and diametral pitch threads possible >> Metric thread pitches: 0.25 to 2.5 mm >> Weight: approx. 360 kg >> Length: 1.2 m, height: 1.3 m, depth: 0.65 m Accessories and Equipment: >> 1 piece 3-jaw chuck 125 mm with 2 sets of jaws >> Collet chuck with 18 collets >> Multifix size A with 3 tool holders >> Stop >> Electrical spindle guard About the Machine: Offered here is a Weiler Primus lead and feed screw lathe in very good condition. The machine is, of course, fully functional. The slides all run very smoothly and evenly. Even at high speeds, the Weiler runs quietly. The Primus was located in a training workshop. This newer generation of Weiler lathes is very user-friendly, and surface finishes similar to grinding can be achieved. Take the opportunity to inspect this machine under power on site and see the condition for yourself.

Kondisi: baik (bekas), Jarak antara ujung: 450 mm Tinggi ujung: 120 mm Lubang spindle: 23 mm Kecepatan: 40 – 3000 rpm Penggerak variabel kontinu dengan 3 tingkat transmisi & tampilan kecepatan digital Tailstock: MT 2 Daya penggerak: 1,5 kW Berat: 350 kg Dimensi: 1200 x 650 x 1330 mm Pewarnaan: Reseda hijau RAL 6011 Tampilan digital: Opsional dengan biaya tambahan Hnsdpfx Agow I A Uxjkon Aksesori: Aksesori lainnya tersedia sesuai permintaan

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, lubang spindel: 40 mm, tinggi pusat: 140 mm, lebar di tengah: 500 mm, kecepatan spindel (maks.): 4.000 rpm, Perlengkapan: kecepatan rotasi dapat diubah tanpa batas, en_001 Hnedpfxjyaluro Agkjn

Kondisi: baik (bekas), 3116 Hnedpfx Aozaqizogksn

Kondisi: baik (bekas), 3115 Hnjdpfx Agozaqihokjn

Kondisi: bekas, Tahun pembuatan: 2003, Detail Teknis: Diameter putar di atas tempat tidur: 720 mm Diameter putar di atas eretan atas: 430 mm Panjang putar: 2000 mm Lebar tempat tidur: 480 mm Jarak antara pusat: 2000 mm Tinggi pusat: 360 mm Perjalanan eretan atas: 410 mm Kontrol: Siemens Sinumerik 810D Weiler D2 Control Kecepatan putar: 1 - 1800 rpm Diameter spindle: 280 mm Lubang spindle: 216 mm Kepala spindle: DIN 55026 - Ukuran 15 Torsi pada spindle: 4300 Nm Kepala senter tailstock ISO: MK 6 Perjalanan pinol tailstock: 225 mm Diameter pinol tailstock: 115 mm Hedpfxezdn S He Agkenn Kebutuhan daya total: 30 kW Berat mesin kira-kira: 6,2 t Dimensi mesin (PxLxT): 4,3 x 2,5 x 1,95 m Oil Country Lathe Mesin khusus untuk pemrosesan batang panjang dan pipa. Dijual mesin bubut berat WEILER E70 x 2000 yang sangat kokoh dan presisi, diproduksi dengan standar kualitas Jerman. Mesin ini sangat ideal untuk produksi part tunggal, pekerjaan reparasi, pembuatan perkakas, serta pekerjaan bubut berat di sektor industri. WEILER E70 menawarkan stabilitas tinggi, kapasitas lubang besar dan torsi putar yang sangat baik – sempurna untuk poros besar, flange, dan benda kerja berat. Tipe pemegang alat: Multifix Ukuran C *

Kondisi: bekas, Panjang putar 500 mm Diameter putar di atas tempat tidur 297 mm Diameter putar di atas penyangga 160 mm Hnsdpfx Ajxacgdogkon Lubang spindle 36,0 mm Konektor DIN 55022 Gr. 5 Tailstock: 3 MK Jarak gerak pinol 90,0 mm Kecepatan putar 30 - 3550 rpm Kecepatan motor: 1410 / 2830 rpm Total kebutuhan daya 3,3 kW Tegangan 380 V Berat mesin sekitar 620 kg. Dimensi P-L-T 1420 x 700 x 1200 mm Dari sekolah kejuruan - kondisi sangat baik (!!) Secara rutin mendapatkan servis pabrik WEILER Sangat cocok untuk suku cadang bubut presisi menengah Perlengkapan: - Mesin bubut dengan lead screw/penggerak/penarik yang kokoh - Chuck KLOPFER empat rahang Ø 140 mm - Chuck KLOPFER tiga rahang Ø 140 mm - Dudukan collet dengan banyak collet - Pelindung chuck yang dapat dilipat - Kunci chuck - Dudukan pahat MULTIFIX A, dengan 3 sisipan baru - Tailstock dapat digeser - Panel kontrol, depan kiri - Feed otomatis untuk carriage dan cross slide - Motor penggerak bipolar - Dudukan mesin dengan pintu lemari (ruang penyimpanan) - Pelindung cip di bagian belakang - Tombol darurat NOT-Aus, kanan bawah - Kaki getar mesin - Manual pengoperasian asli