Beli Weing Dimter Profipress L2500 bekas (21.163)

Kondisi: bekas, Dimter Profipress L 2500 Tahun pembuatan: 2006 Dimensi: • Lebar bilah (untuk panel): 30-150 mm • Ketebalan: 11-60 mm • Panjang masuk: 800-2500 mm • Lebar panel: variabel, hingga maksimal 1300 mm • Lebar pengisian per siklus: min. 650 mm / maks. 1300 mm • Unit hidraulik terintegrasi untuk daya tekan dan motor hidraulik • Kelistrikan: • Tegangan operasional: sekitar 400 V / 50 Hz Godpfx Aieyhggrsysub • Nilai sambungan listrik untuk generator HF 40 kW: 56 kW

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2007, This DIMTER PROFIPRESS L2500 was manufactured in 2007. This robust used gluing press features a pressing table of approximately 2500 x 1300 mm and a stable base frame. It is equipped with a motorized multifunction pusher and an automatic gluing station with a precision glue applicator head. The press is suitable for both softwood and hardwood, ensuring uniform pressure distribution and high vertical pressure for minimal offset. Contact us for further information regarding this machine. • Workpiece capacity: • Lamella widths (for panels): 30–150 mm • Thicknesses: 11–60 mm • Input lengths: 800–2500 mm • Panel width: variable, up to max. 1300 mm • Feed width per stroke: min. 650 mm / max. 1300 mm • Max. filling area per cycle: 3.25 m² • Note: The maximum usable pressing width depends on the individual lamella widths • In multi-lane operation, filling widths can vary by max. 15 mm Gsdpfx Aex D I Nreiyjub • Minimum contact area per press filling: ≥ 100 cm² • Press performance: • Specific pressing pressure (at 2500 x 60 mm): up to 1.6 N/mm² • Pressing table and construction: • Pressing table area: approx. 2500 x 1300 mm • Sturdy base frame with lower pressing table made of stainless steel (polished electrode) • Upper pressure plate with hydraulic "Anti-Reb" motor for high vertical pressure and low offset • Special hydraulic pressure elements ensure even pressure on the joint and compensate for tolerances • Quick-change stop rule sets for panel thicknesses 19–40 mm; hydraulically adjustable to current filling width • Integrated hydraulic unit for pressing force and hydraulic motors • Electrical: • Operating voltage: approx. 400 V / 50 Hz • Rated electrical power for the press (without options): 7 kW • Rated electrical power for 40 kW HF generator: 56 kW • Controls and safety: • Control cabinet and operator panel • Safety cover Additional equipment • Extended collecting table to 3700 x 1300 mm (with stainless steel wooden support) • Motor-driven multifunction pusher • Additional individual pressure elements from above • Automatic gluing station with precision glue applicator head • Feed system for varying widths • Camera • Washing and rinsing unit for the glue head • Modem with software for online connectivity

Kondisi: sangat baik (bekas), Tahun pembuatan: 2009, Fungsionalitas: berfungsi sepenuhnya, Weinig Dimter Profipress C 2800 P - 6 m Gluing Press, year 2009 Manufacturer: Weinig Dimter Model: Profipress C 2800 P - 6 m Year of manufacture: 2009 Condition: very good Machine description: For sale: Weinig Dimter Profipress C 2800 P - 6 m wood gluing press, year 2009, designed for the production of laminated timber panels and components from softwood. The machine is engineered for efficient production using PVAC glue in class D2 / D3 and can process materials within defined width, thickness, and input length parameters. According to the documentation, this model can accommodate materials with a width of 30 to 80 mm, thickness of 15 to 40 mm, and input lengths from 2100 to 2800 mm. The machine allows for the production of panels with variable widths from 600 to 1200 mm. For short lengths, the collecting distance range is 700 to 1400 mm. Capacity is up to 10–15 cycles per minute, depending on the input width. The Profipress C 2800 P - 6 m is intended for softwood processing. The permissible curvature of the material is max. 5 mm per meter. The documentation also specifies the recommended operating conditions, including an ambient temperature of 15 to 30 degrees Celsius and relative humidity of 40 to 65 percent. Technical data: - Model: Profipress C 2800 P - 6 m - Year of manufacture: 2009 - Output: max. 10–15 cycles/min, depending on input width - Wood width: 30–80 mm - Wood thickness: 15–40 mm - Input wood length: 2100–2800 mm - Collecting distance for short lengths: 700–1400 mm Godoyvgiaopfx Aiysub - Panel width: 600–1200 mm - Type of wood: softwood - Permissible curvature: max. 5 mm/m - Adhesive type: PVAC D2 / D3 - Recommended working temperature: 15–30°C - Recommended air humidity: 40–65% Features and advantages: - Press intended for laminated panel production - Machine from renowned manufacturer Weinig Dimter - Capacity up to 10–15 cycles per minute - Capability to produce panels with variable widths - Suitable for softwood processing - Compatible with standard PVAC D2 / D3 adhesives - Industrial application in joineries and production facilities

Kondisi: bekas, Tahun pembuatan: 2001, Timber dimensions to be processed: Input lengths min/max: 500 - 6500 mm Full optimization up to max. 1500 mm Input widths min/max: 40 - 300 mm Input thicknesses min/max: 15 - 120 mm Maximum timber cross-section: 300 x 40 mm or 200 x 120 mm Fixed lengths after saw, min./max.: 510 – 2800 mm Special application: Cutting blocks, length min/max: 100 – 200 mm (Note: Multiple block lengths in new sorting; blocks are transported to the end of the sorting line and fall into customer-supplied mesh boxes) Cut-off/trimming tolerance: +/- 0.8 – 1.5 mm (for timber with minimal resin content and even surface. Tolerance up to 1m fixed length max.; tolerance for longer parts up to 2.5m). Thickness tolerance: +/- 3 mm Curvature of timbers in any direction: max. 10 mm per meter length Timber species: Softwood or hardwood System performance: Feed speed: steplessly adjustable up to max. 230 m/min Cutting cycle: 0.6 – 1 sec To attain the practical daily capacity, effectiveness factors dependent on the customer’s production conditions must be considered. Infeed height and saw: 900 mm (To be mounted on customer-side platform, saw requires concrete base) Sorting height: 2000 mm Connection data: Total electrical connected load: approx. 18 kW Operating voltage: 380 Volt / 50 Hz Maximum voltage fluctuation: 5 % Compressed air consumption: approx. 1200 NL/min Operating pressure: approx. 8 bar Extraction speed: approx. 30 m/s Paint color: pebble grey RAL 7032 and blue NCS 5030-R 80 B POSITION OVERVIEW: Pos. 1: Infeed and marking station with 1 adjustable side support table, 1 table as stop edge Pos. 2: Non-driven support roller, front end in front of sheet metal table for easier loading Pos. 3: Length measuring station with built-in fluorescence camera for detection of defect markings Pos. 4: Automatic contactless width measurement Pos. 5: Optimizing cross-cut saw OptiCut 304 – right-hand version, with built-in waste chute, includes equipment package for large timber cross-sections Graphic input terminal (16 x 40 characters, numeric keypad) with software package for optimization and plant control Processing capability: - max. 16 product groups - max. 8 grades per product group - max. 200 fixed lengths per product group Pos. 6: Outfeed conveyor as sorting station with drive unit, length 7500 mm Guodpfx Aow Sy T Heiyeb Pos. 7: 2 ejectors mounted on the outfeed conveyor Location: Nattheim

Kondisi: baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Konveyor, sabuk pengangkut, belt conveyor. Dimensi: P 7600 x L 350 x T 900 mm. Lebar sabuk: 240 mm. Motor magnet permanen 3 fase Rexroth. Telah dibersihkan, diperbaiki & diuji fungsinya. Gedpfx Aisvn Sk Seyjub

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1997, jarak pergerakan sumbu X: 3.000 mm, jarak lintasan sumbu Y: 100 mm, jarak gerak sumbu Z: 142 mm, produsen pengendali: SIEMENS, model controller: WS 400-20, CNC machining center from 1997. This WEINIG / DIMTER Unicontrol 10 offers a maximum workpiece length of 3,600 mm and a maximum workpiece height of 100 mm. It features a powerful cross-cut saw with a spindle speed of up to 3,000 rpm and a tenoning spindle motor power of 15 kW. If you are looking for high-quality CNC processing solutions, you should consider the WEINIG / DIMTER Unicontrol 10, which we are offering for sale. Contact us for further details. • Max. workpiece height: 100 mm • Min. workpiece height: 40 mm • Min. workpiece width: 40 mm • Max. workpiece width: 140 mm • Max. workpiece length with CNC stop: 3,500–3,600 mm • X-axis travel: 3,000–3,500 mm (depending on version) • Cross-cut saw motor power: 3.7 kW • Cross-cut saw spindle speed: 2,800–3,000 rpm • Cross-cut saw max. tool diameter: 400 mm • Cross-cut saw spindle diameter: 40 mm • Number of tenoning/grooving spindles: 2 units • Tenoning spindle diameter: 50 mm • Clamping length of tenoning spindle: 400–640 mm • Tenoning spindle max. tool diameter: 400 mm • Tenoning spindle 1 motor power: 11 kW Gjdpfx Aisy Ixpasysub • Tenoning spindle 2 motor power: 15 kW • Tenoning spindle speed: 2,900–3,250 rpm • Number of profiling spindles (vertical): 2–3 units • Profiling spindle diameter: 50 mm • Clamping length of profiling spindle: 320–400 mm • Profiling spindle max. tool diameter (swing circle): 232 mm • Profiling spindle motor power: 11 kW (each) • Profiling spindle speed: 6,000 rpm • Motor power of horizontal profiling unit (top): 3 kW • Spindle diameter of horizontal profiling unit: 40 mm • Horizontal profiling unit max. tool diameter: 130 mm • Horizontal profiling unit speed: 5,850 rpm

Tahun pembuatan: 2005, Kondisi: siap digunakan (bekas), this WEINIG Unimat 500 was manufactured in 2005. The robust woodworking machine features a working area of 230 x 120 mm and five spindles, ensuring efficient operation with variable feed speeds ranging from 4 to 30 m/min. The spindle power is 4 kW for infeed and outfeed, and 7.5 kW for the right/left and top spindles. Take advantage of this opportunity to purchase the WEINIG Unimat 500 woodworking machine. Contact us for further information about this machine. • Groove guidance and hydraulic nuts • Working area (W x H): 230 x 120 mm • Number of spindles: 5 • Variable feed speed: 4 - 30 m/min • Spindle power: bottom (infeed): 4 kW / right / left: 7.5 kW each / top: 7.5 kW / bottom (outfeed): 4 kW Guodpfx Aijyaihpsyjb Additional equipment • Includes approx. 70 Z4 cutterheads • Several hundred new blank knives with toothed backs It is possible to purchase the WEINIG Unimat 500 alone (without the Weinig Rondamat 931 profile knife grinder and additional tools) at a price of €37,000.

Kondisi: baik (bekas), Tahun pembuatan: 1992, Fully automatic, programmable cross-cutting with additional defect marking detection for error removal via LUT system. Infeed conveyor length: 6 m 6 ejection stations, total length 12 m Gjdpsl H E Tasfx Aiyeub Currently, the infeed conveyor is not operating; the issue is likely due to the frequency inverter.

Kondisi: hampir baru (bekas), Spare parts & accessories Dimter + GreCon + REX + Kupfermühle + Cook Bolinders Various items in stock for planing machines and finger jointing lines: Kupfermühle Gusdpfx Ajlifbdjiyob Rex Cook Bolinders Dimter GreCon Simply inquire

Kondisi: bekas, Tahun pembuatan: 1997, Dimter Profi Joint 600 KD Jalur Mesin Finger Joint Kapasitas lini: 2,5 papan per menit. Godpfx Aioxmvxyoyoub Dimensi papan: P = 900 mm, T = 180 mm, L = 600 mm. Jika volume maksimum satu papan penuh adalah 0,081 m³ x 2,5 = ~0,2 m³, maka material dapat dimasukkan ke mesin dalam satu menit. Namun, ini sangat bergantung pada ukuran bahan baku yang dimasukkan. Meter lari: Kami memproses 10.000–12.000 meter dalam satu shift 8 jam. Bahan baku yang digunakan tebal 24 mm dan lebar 98 mm. Panjang bahan baku antara 200 hingga 60 m. Sudah dibongkar

Kondisi: diremajakan ulang (bekas), Tahun pembuatan: 2025, Fungsionalitas: berfungsi sepenuhnya, diameter mata gergaji: 700 mm, penggerak gergaji: 15.000 W, daya motor servo: 11.000 W, Mesin direkondisi total / seperti baru dengan sistem kelistrikan baru kontrol Siemens S7 baru Penyelesaian setelah pemesanan Pemotong otomatis dengan deteksi garis kapur Gujdpfx Aiev Diy Asyeb Penampang kayu 430x30 / 300x150 / 200x200 DIMTER OptiCut 602 R Diameter mata gergaji 650/700 mm Kecepatan pengumpan 120 m/menit Motor gergaji 15 kW Penggerak servo SEW 11,00 kW dengan konverter penyesuaian ketebalan elektrik

Kondisi: perlu perbaikan (bekas), Fungsionalitas: belum diuji, Keilzinkenanlage dimter HK 400 Mesin finger joint untuk paket kayu Panjang input: 800–6.000 mm Tinggi frais: 285 mm, opsional 300 mm Warna: Biru Terdiri dari: Pos. 01 Pengemasan Pos. 02 Konveyor rol untuk paket Pos. 03 Mesin frais sentral Pos. 04 Konveyor rol untuk paket Pos. 05 Unit pemisah paket Pos. 06 Konveyor lintas rantai Pos. 07 Konveyor rol pemasukan Gusdpfx Aevi Hw Njiyeb Pos. 08 Press langkah Pos. 09 Unit pengumpan Pos. 10 Gergaji pemotong panjang Termasuk panel kontrol Mesin memerlukan perbaikan dan dijual dalam kondisi apa adanya. Mesin sudah dibongkar dan disimpan di Achern. Semua dokumen teknis tersedia. Untuk pertanyaan mengenai mesin dan informasi teknis, kami selalu siap membantu. Kami akan memberikan konsultasi dalam proses perbaikan dan instalasi.

Kondisi: siap digunakan (bekas), Glue application unit with 2 rollers Adhesive application - Glue application for package heights up to 300 mm 1 application roller and 1 dosing roller Gsdjht Rtajpfx Aiyoub - 1 unit left - 1 unit right - suitable for DIMTER HK200 + HK400 + HK800 + HK1000 Dimter spare parts Dimter accessories

Kondisi: sangat baik (bekas), Tahun pembuatan: 2000, Fungsionalitas: berfungsi sepenuhnya, Optimizator Grecon Dimter OptiCut 304R Panjang kayu masuk minimum: 900 mm dengan pemuatan pada konveyor rantai melintang Lebar kayu min./maks.: 40-200 mm Tebal kayu min./maks.: 15-80 mm Penurunan, pemotongan dan percepatan: 0,5 – 1 detik Akurasi pemotongan: min. 0,8 mm, maks. 1,5 mm Penampang kayu maksimal: 200×25 mm, 170×50 mm, 80×80 mm, 140×60 mm Guodeyxltyjpfx Aiyob Diameter mata gergaji: 400 x 30 mm Kecepatan putaran mata gergaji: 4200 rpm Kecepatan maju maks.: 170 m/menit Konveyor sabuk pengeluaran material dengan 6 pendorong Mode pemotongan: 1. Pemotongan dengan panjang tetap 2. Optimasi panjang papan untuk memaksimalkan hasil 3. Penghapusan cacat kayu dengan penandaan kapur Panjang total lini: 21 m Tahun produksi: 2000

Kondisi: sangat baik (bekas), Tahun pembuatan: 2003, Fungsionalitas: berfungsi sepenuhnya, es-hu-001 Guedpfsy Amk Ujx Aiyjb

Kondisi: bekas, Tahun pembuatan: 1999, Fungsionalitas: berfungsi sepenuhnya, diameter pemasangan: 50 mm, jenis arus masuk: tiga fasa, diameter alat: 50 mm, panjang alat: 330 mm, frekuensi input: 50 Hz, Alat Prasetel Alat WEINIG Opticontrol Diameter lingkar luar: 0 - 300 mm Panjang alat: 0 - 330 mm Diameter batang: 50 mm Gjdpfx Aioxwnvrsysub

Kondisi: baik (bekas), Tahun pembuatan: 1992, I am selling an automatic pneumatic cross-cut saw, GreCon Dimter 2004, year of manufacture 1992. Infeed table: automatic / throughfeed system Outfeed table 3 ejectors on the left outfeed table. Total length: 15.50 m Guodpet Ir Nqofx Aiyob Optimization with automatic defect detection and automatic cut pattern programming. Available immediately. Spare parts and documentation included.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2019, jam operasional: 1.000 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 8135.44, ketinggian potong (maks.): 100 mm, kedalaman pemotongan: 300 mm, Gergaji hebat, selalu memotong hingga 0,5 mm; untuk usianya, jarang digunakan. Guodpfxsyngnij Aiyob

Kondisi: sangat baik (bekas), Tahun pembuatan: 2001, Fungsionalitas: berfungsi sepenuhnya, Leistungsstarke Optimierkreissäge GRECON DIMTER OptiCut S75-4 mit Defekterkennung. Diese Maschine ist ideal für präzises Ablängen von Massivholz und bietet eine automatische Erkennung und Aussonderung von Materialfehlern. Technische Daten: Maximale Eingabelänge: 6300 mm (Schieber) Minimale Schnittlänge: 50 mm Maximale Schnittbreite: 360 x 30 mm / 240 x 160 mm Guedpfsyxwyrsx Aiyob Maximale Vorschubgeschwindigkeit: 60 m/min Hauptantrieb (Säge): 7,5 kW Sägeblattdurchmesser: 400 mm Baujahr: 2001 Drehstrom: 400 V / 50 Hz Steuerspannung: 230 VAC / 24 VDC Nennleistung: 11 kW Sicherungsabsicherung: 25 A Maschinenmaße: Zuführung: L 7600 x B 800 x H 1100 mm / Säge: L 1400 x B 1200 x H 1650 mm / Auslauf: L 5200 x B 600 x H 900 mm Gesamte Arbeitshöhe: 850 mm Defekterkennung: Automatische Identifizierung und Aussonderung von Holzfehlern (Astlöcher, Risse etc.) Ertragsoptimierung: Softwaregestützte Berechnung zur bestmöglichen Ausnutzung des Rohholzes. Bedienungsanleitung auf Englisch und Deutsch / Elektroschaltplan enthalten. Maschine kann im laufenden Betrieb besichtigt werden. WHATSAPP-Video auf Anfrage.

Tahun pembuatan: 1998, Kondisi: siap digunakan (bekas), daya motor spindle: 11.000 W, kecepatan spindel (maks.): 6.000 rpm, This Weinig Unicontrol 10-5 was manufactured in 1998. It is a robust pre-owned window production machine with a working width of 40-220 mm and a motor power of up to 15 kW for various processing units. The machine is equipped with advanced features such as a synchronization device, electronic height adjustment, and an automatic reversing system for efficient single-operator control. If you are looking for a high-quality profiling machine, you should consider the Weinig Unicontrol 10-5 we have for sale. Contact us for further details. • Capacity • Working width: 40-220 mm • Working height (longitudinal processing): 40-100 mm • Working height (cross processing): 40-100 mm (crossgrain height 80 mm) • Workpiece length (longitudinal): min. 220 mm + 2 x tenon length • Workpiece length (cross): min. 275 mm + 1 x tenon length with 320 mm tool diameter • Feed (cross processing) • Motor power: 0.3 kW • Feed speed: 3-25 m/min • Workpiece clamping: 2 pressure pads • Length stop: with scale and magnifier for frame or sash outer dimensions • Counter: pneumatically indexed, 4 positions (not for studio-type windows), up to a max. wood height of 80 mm • Double-part package: single or double-part feeding, with cross separation and retention system • 1st piece (on the stop) wood width: 55-90 mm • 2nd part wood width: 130 mm • Feed (longitudinal processing) • Motor power: 2.2 kW • Feed speed: 4-18 m/min (infinitely adjustable via frequency inverter) • Feed roller spacing: 100/120 mm • Feed roller width: 30/50 mm • Feed roller diameter: 95 mm • Processing units • Cross-cut saw • Motor power: 3 kW • Spindle diameter: 40 mm • Spindle speed: 2800 rpm • Tool stroke: max. 400 mm • Axial adjustment: pneumatic, via 4-position turret • 1st spindle with tenoning and slotting • Motor power: 11 kW • Spindle diameter: 50 mm • Spindle speed: 3250 rpm • Tool stroke: max. 320 mm • Tool clamping length: 320 mm • Axial adjustment range: 240 mm • Number of tools: 4 x 80 mm • Axial adjustment: hydraulic • 1st profiling spindle • Motor power: 11 kW • Spindle diameter: 50 mm • Spindle speed: 6000 rpm • Tool diameter: max. 232 mm • Tool zero-point swing-circle: 130-140 mm Gsdpfx Aiex S Sk Esyjub • Tool clamping length: 320 mm • Axial/radial adjustment range: 240/80 mm • Number of tool positions: 4 x 80 mm • Axial adjustment: hydraulic • 2nd profiling spindle • Motor power: 11 kW • Spindle diameter: 50 mm • Spindle speed: 6000 rpm • Tool diameter: max. 232 mm • Tool zero-point circle: 130-140 mm • Tool clamping length: 320 mm • Axial/radial adjustment range: 240/80 mm • Number of tool positions: 4 x 80 mm • Axial adjustment: hydraulic • Mechanical spindle brakes • For profiling spindle(s) • For cross-cut saw and profiling/sawing units • Profile milling unit (horizontal, top; in front of the last profiling spindle) • Radially switched: 2 positions • Axially switched: 2 positions • Motor power: 3 kW • Spindle diameter: 40 mm • Spindle speed: 5850 rpm • Tool stroke: 130 mm • Tool clamping length: 40 mm • Axial adjustment range: 52 mm • Radial adjustment range: 125 mm • Profile milling unit (vertical, right; at the end of the machine) • Radially indexed: 2 positions • Axially indexed: 2 positions • Motor power: 3 kW • Spindle diameter: 40 mm • Spindle speed: 5850 rpm • Tool stroke: 210 mm • Tool clamping length: 160 mm

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2018, Optimizing crosscut saw from 2018. This WEINIG DIMTER Opticut S90 features a 500 mm saw blade diameter and a maximum cutting height of 120 mm. It is suitable for input lengths from 400 to 6,300 mm and widths from 20 to 300 mm. If you are looking for a high-quality cutting machine, the WEINIG DIMTER Opticut S90, which we offer for sale, should be considered. Contact us for further details. • Saw blade • Diameter: 500 mm • Bore: 30 mm • Adjustable saw blade speed: 40-100% via frequency inverter • Workpiece capacity • Input length (min/max): 400-6,300 mm • Width (min/max): 20-300 mm • Thickness (min/max): 10-120 mm • Maximum cutting height: 120 mm • Minimum cross-section: 20 x 10 mm • Maximum cross-section 1: 215 x 120 mm • Maximum cross-section 2: 300 x 40 mm • Permissible wood curvature: max. 2 mm/m or 8 mm over the full length • Table incline: 10° • Movement and accuracy • Positioning speed (return stroke): max approx. 180 m/min • Positioning speed (forward stroke): max approx. 60 m/min • Positioning accuracy: +/- 0.1 mm • Motors and power • Pusher motor output: 5.1 kW Gujdsylmmmopfx Aiysb • Saw motor output: 7.5 kW • Total electrical power: approx. 15 kW • Control and interface • Control unit: OptiCom Pro with 18.5" touchscreen • Screen resolution: 1366 x 768 pixels • Protection rating (front): IP65 • Interface: USB port and Ethernet network connection • Data format: CSV (ASCII) for import/export • Operating parameters and environment • Voltage: 400 V / 50 Hz • Operating pressure: 6-8 bar (min.) • Air consumption: approx. 250 NL/min • Extraction port: diameter 125 mm • Required extraction capacity: velocity approx. 30 m/s; volume approx. 1,300 m³/h • Noise level (idling): ≤ 85 dBA

Kondisi: siap digunakan (bekas), Fungsionalitas: berfungsi sepenuhnya, Konveyor rol Panjang: 7500 mm Lebar: 600 mm Gedpfx Aieyxmb Ejyoub Tinggi: 1700 mm

Kondisi: sangat baik (bekas), Tahun pembuatan: 2006, Fungsionalitas: berfungsi sepenuhnya, Sierra optimizadora de tronzado Dimter / Weinig OptiCut 450 Quantum Fabricante: Dimter / Weinig Modelo: OptiCut 450 Quantum Año de fabricación: 2006 Descripción de la máquina: Se vende sierra optimizadora de tronzado Dimter / Weinig OptiCut 450 Quantum, año 2006, para el corte transversal rápido y preciso de madera, ofreciendo optimización de rendimiento. La versión Quantum es una de las más avanzadas de la serie OptiCut 450, desarrollada para aplicaciones industriales que requieren muy alta productividad, posicionamiento exacto y transporte fiable del material. La máquina está destinada al corte a medida, la eliminación de defectos y la optimización de la producción. La serie OptiCut 450 está preparada para integrarse con escáneres, sistemas de clasificación y equipos automáticos de manipulación. Entre las características destacadas de la versión Quantum se encuentran el sistema de alimentación VarioSpeed, rodillos HighGrip, medición de longitud independiente y compuerta de desperdicio con control inteligente por servomotor. Datos técnicos: - Capacidad: hasta aprox. 540 cortes/min - Velocidad de avance: aprox. 300 – 415 m/min - Longitud máxima de la pieza: aprox. 6,3 m - Diámetro de la sierra: 450 mm - Ancho máximo de corte: 235 mm - Altura máxima de corte: 100 mm - Altura de trabajo: 900 mm - Potencia del motor: 7,5 kW - Consumo de aire comprimido: aprox. 1200 NL/min - Precisión de corte en la serie OptiCut 450: aprox. ±0,8 mm Características / ventajas: - Muy alta capacidad de corte - Alta precisión de posicionamiento - Sistema VarioSpeed para minimizar los espacios entre piezas - Rodillos HighGrip para un transporte seguro del material - Compuerta de desperdicio controlada mediante servomotor - Integración posible con sistemas de escaneo y líneas de clasificación - Tecnología Weinig / Dimter probada para producción continua Estado: Muy buen estado Nota: Los datos técnicos pueden variar en función de la configuración específica de la máquina, la versión del sistema de control, el sistema de transporte y los equipos opcionales instalados. Gedpjyu Uriefx Aiyeub

Kondisi: baik (bekas), Tahun pembuatan: 2004, Fungsionalitas: berfungsi sepenuhnya, en-Sierra optimizadora de tronzado Dimter / Weinig OptiCut 350 Manufacturer: Dimter / Weinig Model: OptiCut 350 Year of manufacture: 2004 Machine description: For sale: Dimter / Weinig OptiCut 350 cross-cut optimizing saw, year 2004, designed for fast and precise cross-cutting of wood with optimization functionality. The OptiCut 350 was part of Dimter’s high-performance series and is used for cut-to-length operations, defect removal, and yield optimization of timber. This machine is suitable for joineries, sawmills, pallet production, furniture component manufacturing, and industrial wood processing. Depending on the configuration, it may include an optimization program, automatic infeed, loading stations, and barcode optimization. Technical data: - Machine type: cross-cut optimizing saw - Maximum cutting height: approx. 120 mm - Maximum workpiece section: approx. 235 x 12 mm or 120 x 100 mm - Minimum wood width: approx. 30 mm - Maximum feed speed: up to approx. 350 m/min - Continuously adjustable feed: yes - Frequency-controlled cutting speed: yes - Saw motor power: 7.5 kW - Positioning accuracy: approx. 2 mm - Optimization software: yes, depending on version - Barcode optimization: available in some configurations - Loading stations: depending on equipment ([Boedeker][1]) Features and benefits: - High cutting capacity - Automatic material positioning - Yield optimization capability - Proven Dimter / Weinig technology - Suitable for continuous production - Good solution for industrial wood processing Condition: Very good Note: Technical data may vary depending on the machine’s exact configuration, optional equipment, table length, and control version. Gedpeyu Uq Eofx Aiysub

Kondisi: baik (bekas), The machine has been overhauled many new parts Guedev Ihdzspfx Aiyob new wiring new hydraulic unit The machine has been inspected and is operational. We can provide a video.