Beli Weinig Opticut 350–4 R bekas (98.552)

Kondisi: bekas, Lini optimasi Pabrikan: Weinig Model: OptiCut 350–4 R Tahun: 2001 Negara pembuatan: Jerman Laodpfx Aey Dri Esfija ⁠Dilengkapi dengan meja pemuatan dan pembongkaran

Kondisi: bekas, Tahun pembuatan: 2001, Timber dimensions to be processed: Input lengths min/max: 500 - 6500 mm Full optimization up to max. 1500 mm Input widths min/max: 40 - 300 mm Input thicknesses min/max: 15 - 120 mm Maximum timber cross-section: 300 x 40 mm or 200 x 120 mm Lodpew Sy T Hsfx Afijaa Fixed lengths after saw, min./max.: 510 – 2800 mm Special application: Cutting blocks, length min/max: 100 – 200 mm (Note: Multiple block lengths in new sorting; blocks are transported to the end of the sorting line and fall into customer-supplied mesh boxes) Cut-off/trimming tolerance: +/- 0.8 – 1.5 mm (for timber with minimal resin content and even surface. Tolerance up to 1m fixed length max.; tolerance for longer parts up to 2.5m). Thickness tolerance: +/- 3 mm Curvature of timbers in any direction: max. 10 mm per meter length Timber species: Softwood or hardwood System performance: Feed speed: steplessly adjustable up to max. 230 m/min Cutting cycle: 0.6 – 1 sec To attain the practical daily capacity, effectiveness factors dependent on the customer’s production conditions must be considered. Infeed height and saw: 900 mm (To be mounted on customer-side platform, saw requires concrete base) Sorting height: 2000 mm Connection data: Total electrical connected load: approx. 18 kW Operating voltage: 380 Volt / 50 Hz Maximum voltage fluctuation: 5 % Compressed air consumption: approx. 1200 NL/min Operating pressure: approx. 8 bar Extraction speed: approx. 30 m/s Paint color: pebble grey RAL 7032 and blue NCS 5030-R 80 B POSITION OVERVIEW: Pos. 1: Infeed and marking station with 1 adjustable side support table, 1 table as stop edge Pos. 2: Non-driven support roller, front end in front of sheet metal table for easier loading Pos. 3: Length measuring station with built-in fluorescence camera for detection of defect markings Pos. 4: Automatic contactless width measurement Pos. 5: Optimizing cross-cut saw OptiCut 304 – right-hand version, with built-in waste chute, includes equipment package for large timber cross-sections Graphic input terminal (16 x 40 characters, numeric keypad) with software package for optimization and plant control Processing capability: - max. 16 product groups - max. 8 grades per product group - max. 200 fixed lengths per product group Pos. 6: Outfeed conveyor as sorting station with drive unit, length 7500 mm Pos. 7: 2 ejectors mounted on the outfeed conveyor Location: Nattheim

Kondisi: bekas, Complete manufacturing line for the production of slatted bed bases. From wood processing to final assembly/packaging. Includes all components such as milling machines, saws, profile processing, forklifts, compressors, etc. The larger machines/systems are from approximately the year 2000. Consisting of: Solid Wood Side Rail Production - 2 x Multi-blade Saw RAIMANN KR 450 + KS 310 - Optimizing Cut-off Saw GRECON ILLERTISSEN OPTICUT 704R - Four-Sided Planer WEINIG HYDROMAT 23 - Stacking Unit Foiling / Finishing of Longitudinal Rails: - 2 x Profile Wrapping Machine FRIZ OPTIMA PU25-PAP - Film Slitting Machine FRIZ FSM 1500 CNC Drilling and Sawing Units - KOCH Drilling and Sawing Unit, with Turning and Stacking Unit - ISE CNC Drilling and Sawing Unit with Stacking Unit - 2 x ISE CNC Woodworking Center / Drilling Units - ISE CNC Slat Milling Machine - 2 x Manual Slat Drilling Machines Individual Machines - GANNOmat CNC Drilling and Dowel Inserting Machine - Pnahans Spindle Moulder - 2 x EiMa Double-Headed Saws - SCM Panel Saw - Barth Frame Press - 2 x FLOTT Column Drilling Machine - SAMCO Combination Saw-Milling Machine - 2 x Multi-Spindle Drilling Machine - 2 x Belt Sanders - Paint Booth - Various Small Machines Assembly - Automatic Assembler for Standard Slatted Frames - Press-In Machine / Capping Line - 14 x Pneumatic Assembly Tables Logistics – Factory Equipment - 3 x LINDE Forklift Trucks E16 / E20 - 7 x LINDE High-Lift Trucks / Electric Pallet Stackers - WEYCOR Wheel Loader 95E SUPER - Atlas-Copco Compressor System - WEIMA Single-Shaft Shredder - Kärcher Ride-On Sweeper - HONDA Snow Blower - Outdoor Extraction System - Batch of Mesh Containers + Euro Pallets - Various Rack Systems Packaging - Shrink Tunnel System Lsdox S Scbspfx Afieaa - Stationary Pallet Wrapper - Mobile Pallet Wrapper Materials - Remaining stock of wood / spring slats - Remaining stock of end caps / plastic parts - Remaining stock of various assembly materials Many more PHOTOS and detailed DATA available upon request.

Kondisi: bekas, Tahun pembuatan: 2000, Complete manufacturing line for the production of slatted bed bases. From wood processing to final assembly/packaging. Includes all components such as milling machines, saws, profile processing, forklifts, compressors, etc. The larger machines/systems are from approximately the year 2000. Consisting of: Solid Wood Side Rail Production - 2 x Multi-blade Saw RAIMANN KR 450 + KS 310 - Optimizing Cut-off Saw GRECON ILLERTISSEN OPTICUT 704R - Four-Sided Planer WEINIG HYDROMAT 23 - Stacking Unit Foiling / Finishing of Longitudinal Rails: - 2 x Profile Wrapping Machine FRIZ OPTIMA PU25-PAP - Film Slitting Machine FRIZ FSM 1500 CNC Drilling and Sawing Units Lodpfxjx S Sb Dj Afieaa - KOCH Drilling and Sawing Unit, with Turning and Stacking Unit - ISE CNC Drilling and Sawing Unit with Stacking Unit - 2 x ISE CNC Woodworking Center / Drilling Units - ISE CNC Slat Milling Machine - 2 x Manual Slat Drilling Machines Individual Machines - GANNOmat CNC Drilling and Dowel Inserting Machine - Pnahans Spindle Moulder - 2 x EiMa Double-Headed Saws - SCM Panel Saw - Barth Frame Press - 2 x FLOTT Column Drilling Machine - SAMCO Combination Saw-Milling Machine - 2 x Multi-Spindle Drilling Machine - 2 x Belt Sanders - Paint Booth - Various Small Machines Assembly - Automatic Assembler for Standard Slatted Frames - Press-In Machine / Capping Line - 14 x Pneumatic Assembly Tables Logistics – Factory Equipment - 3 x LINDE Forklift Trucks E16 / E20 - 7 x LINDE High-Lift Trucks / Electric Pallet Stackers - WEYCOR Wheel Loader 95E SUPER - Atlas-Copco Compressor System - WEIMA Single-Shaft Shredder - Kärcher Ride-On Sweeper - HONDA Snow Blower - Outdoor Extraction System - Batch of Mesh Containers + Euro Pallets - Various Rack Systems Packaging - Shrink Tunnel System - Stationary Pallet Wrapper - Mobile Pallet Wrapper Materials - Remaining stock of wood / spring slats - Remaining stock of end caps / plastic parts - Remaining stock of various assembly materials Many more PHOTOS and detailed DATA available upon request.

Kondisi: baik (bekas), Tahun pembuatan: 2004, Fungsionalitas: berfungsi sepenuhnya, en-Sierra optimizadora de tronzado Dimter / Weinig OptiCut 350 Manufacturer: Dimter / Weinig Model: OptiCut 350 Year of manufacture: 2004 Machine description: For sale: Dimter / Weinig OptiCut 350 cross-cut optimizing saw, year 2004, designed for fast and precise cross-cutting of wood with optimization functionality. The OptiCut 350 was part of Dimter’s high-performance series and is used for cut-to-length operations, defect removal, and yield optimization of timber. This machine is suitable for joineries, sawmills, pallet production, furniture component manufacturing, and industrial wood processing. Depending on the configuration, it may include an optimization program, automatic infeed, loading stations, and barcode optimization. Technical data: - Machine type: cross-cut optimizing saw - Maximum cutting height: approx. 120 mm - Maximum workpiece section: approx. 235 x 12 mm or 120 x 100 mm - Minimum wood width: approx. 30 mm - Maximum feed speed: up to approx. 350 m/min - Continuously adjustable feed: yes - Frequency-controlled cutting speed: yes - Saw motor power: 7.5 kW - Positioning accuracy: approx. 2 mm - Optimization software: yes, depending on version - Barcode optimization: available in some configurations - Loading stations: depending on equipment ([Boedeker][1]) Features and benefits: - High cutting capacity - Automatic material positioning - Yield optimization capability - Proven Dimter / Weinig technology - Suitable for continuous production - Good solution for industrial wood processing Condition: Very good Note: Technical data may vary depending on the machine’s exact configuration, optional equipment, table length, and control version. Laodpfx Afoyu Uq Esija

Tahun pembuatan: 2004, Kondisi: sangat baik (bekas), Dimter optimizing cross-cut saw 350 with elevated working height of 1400 mm Cross infeed as per image Cross-cut saw Control cabinet Scanner interface Sorting section 6500 mm long with 3 pushers Ledpfx Afjncc Icjieaa Waste flap Machine has already been dismantled and is available immediately The machine was running without any issues until dismantling Transport can be arranged

Kondisi: sangat baik (bekas), CATALOG NO. 7221 TECHNICAL DATA - Min / max width of workpiece: 45 / 150 mm - Min / max height of workpiece: 15 / 50 mm 3 spindles: 1) Bottom horizontal 11 kW 2) Top horizontal 22 kW (7000 rpm) 3) Bottom horizontal 5.5 kW Spindle diameter: 40 mm - Spindles 1 and 3 manually adjustable up/down, left/right - Spindle 2 manually adjustable left/right - Spindle 2 electrically adjustable up/down - Spindles 2 and 3 equipped with brakes Ledeyy I Ayepfx Afioaa From the top: - 3 infeed feed rollers, metal, toothed - 1 double outfeed feed roller, rubber coated From below: - Infeed pressure unit - Ribbed table surface - Feed roller, metal, smooth - Electric thickness adjustment - Stepless feed speed adjustment 6-24 m/min - Feed motor 3 kW - Feed via cardan shaft - Infeed table length 1970 mm - Automatic table lubrication system - Extraction connector diameter 1x150 mm, 2x140 mm - Dimensions (LxWxH) 3070x2000x1800 mm - Weight 2000 kg ADVANTAGES – German-made – With 3 cutterheads – Suitable for lamella processing – Ribbed table – Cutterheads included – Unpainted – Very good condition – Used planer Net price: 125,900 PLN Net price: 29,980 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (In case of significant exchange rate fluctuations, the price may change)

Kondisi: sangat baik (bekas), Tahun pembuatan: 2006, Fungsionalitas: berfungsi sepenuhnya, Sierra optimizadora de tronzado Dimter / Weinig OptiCut 450 Quantum Fabricante: Dimter / Weinig Modelo: OptiCut 450 Quantum Año de fabricación: 2006 Descripción de la máquina: Se vende sierra optimizadora de tronzado Dimter / Weinig OptiCut 450 Quantum, año 2006, para el corte transversal rápido y preciso de madera, ofreciendo optimización de rendimiento. La versión Quantum es una de las más avanzadas de la serie OptiCut 450, desarrollada para aplicaciones industriales que requieren muy alta productividad, posicionamiento exacto y transporte fiable del material. La máquina está destinada al corte a medida, la eliminación de defectos y la optimización de la producción. La serie OptiCut 450 está preparada para integrarse con escáneres, sistemas de clasificación y equipos automáticos de manipulación. Entre las características destacadas de la versión Quantum se encuentran el sistema de alimentación VarioSpeed, rodillos HighGrip, medición de longitud independiente y compuerta de desperdicio con control inteligente por servomotor. Datos técnicos: - Capacidad: hasta aprox. 540 cortes/min - Velocidad de avance: aprox. 300 – 415 m/min - Longitud máxima de la pieza: aprox. 6,3 m - Diámetro de la sierra: 450 mm - Ancho máximo de corte: 235 mm - Altura máxima de corte: 100 mm - Altura de trabajo: 900 mm - Potencia del motor: 7,5 kW - Consumo de aire comprimido: aprox. 1200 NL/min - Precisión de corte en la serie OptiCut 450: aprox. ±0,8 mm Ledoyu Uriopfx Afieaa Características / ventajas: - Muy alta capacidad de corte - Alta precisión de posicionamiento - Sistema VarioSpeed para minimizar los espacios entre piezas - Rodillos HighGrip para un transporte seguro del material - Compuerta de desperdicio controlada mediante servomotor - Integración posible con sistemas de escaneo y líneas de clasificación - Tecnología Weinig / Dimter probada para producción continua Estado: Muy buen estado Nota: Los datos técnicos pueden variar en función de la configuración específica de la máquina, la versión del sistema de control, el sistema de transporte y los equipos opcionales instalados.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2003, Fungsionalitas: berfungsi sepenuhnya, Mesin serut empat sisi WEINIG UNIMAT SUPER 4 Tahun produksi: 2003 Laodpfjyiviljx Afiea DATA TEKNIS: - Lebar benda kerja min / maks: 45 / 150 mm - Tinggi benda kerja min / maks: 15 / 50 mm 3 spindle: 1) horisontal bawah 11kW 2) horisontal atas 18,5kW 3) horisontal bawah 5,5kW diameter spindle: 40 mm

Kondisi: bekas, Tahun pembuatan: 2007, Fungsionalitas: berfungsi sepenuhnya, lebar kerja: 150 mm, tinggi penyerutan: 50 mm, diameter spindel: 40 mm, lebar perataan: 150 mm, tinggi kerja: 50 mm, - after technical inspection - German-made - year of manufacture: 2007 - equipped with Weinig EM 15 belt feeder TECHNICAL SPECIFICATIONS: - planing width: 150 mm - planing height: 50 mm - spindle diameter: 40 mm - first (bottom) head: 11 kW, 6000 rpm - second (top) head: 22 kW, 7000 rpm - third (bottom) head: 5.5 kW, 6000 rpm - feed motor: 2.2 kW - feed speed adjustable via inverter - feed via cardan shafts - four upper steel feed rollers - one upper rubber outfeed roller - grooved worktable Laedpfx Aew E I Rujfiea - length of pre-feed table: 1000 mm - automatic central lubrication - infeed table length: 4700 mm - speed adjustable via inverter - hydraulic pressure rollers - total feeder power: 2.25 kW - machine dimensions (L/W/H): 790 x 200 x 190 cm - weight: 3200 kg

Kondisi: hampir baru (bekas), Tahun pembuatan: 2004, WEINIG UNIMAT SUPER 4 Planer – German-made – Very good condition – Year of manufacture: 2004 – Technical Documentation (DTR) included TECHNICAL PARAMETERS: Planing width: 150 mm Planing height: 50 mm Spindle diameter: 40 mm Equipped with tooling Adjustable top head 1) Bottom head: 11 kW, 6000 RPM 2) Top head: 18.5 kW, 7000 RPM Lajdpfxjin Nrgj Afija 3) Bottom head: 5.5 kW, 6000 RPM Feed motor: 2.2 kW Feed speed adjustable via inverter: 0–18 m/min Feed via cardan shafts Pneumatic pressure system Three upper steel feed rollers One upper rubber feed roller Ribbed table Infeed table length: 1950 mm Total power: 37 kW Centralized lubrication system Transport dimensions: Length/Width/Height: 320 x 220 x 220 cm Weight: approx. 2700 kg

Kondisi: sangat baik (bekas), Tahun pembuatan: 2005, Kami menawarkan mesin serut Weinig Super 4 dengan feeder EM 15 dalam kondisi sangat baik, tahun produksi 2005. Produsen: Weinig Model: Super 4 Tahun produksi: 2005 Kondisi: sangat baik Tipe: mesin serut Lasdoylagmepfx Afiea Jika ada pertanyaan atau membutuhkan informasi tambahan, silakan kirim pesan atau hubungi kami melalui telepon.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2004, Optymalizerka Weinig Dimter Opticut 200 Classic – po przeglądzie technicznym – rok produkcji 2004 – deklaracja zgodności, DTR – produkcji Niemieckiej PARAMETRY TECHNICZNE: min./max. długość wejściowa elementu 800 / 3500 mm min./max. szerokość wejściowa elementu 80 / 200 mm min./max. grubość wejściowa elementu 12 / 80 mm rodzaj drewna twarde/miękkie wycinanie na kreskę klasyfikacja drewna max. prędkość posuwu 120 m/min przyspieszanie 5 m/s średnica piły fi 500 mm średnica otworu piły 30 mm liczba obrotów wrzeciona piły 4600 U/min czas trwania 1 cyklu 0,7 - 1,2 sek napędzany transporter na wejściu i stacja znakowania z bocznymi stołami dla dwóch znakujących transporter taśmowy łączna moc 15 kW pomiar długości – kamera fluorescencyjna dla 3 jakości stacja odbioru – taśmociąg pełna optymalizacja łączna długość 8300 mm średnica króćca 80 i 120 mm sterowanie OptiCom Direct zasilanie 400 V / 50 Hz Lasdpogz Tbdjfx Afisa

Kondisi: baik (bekas), Tahun pembuatan: 1999, nomor mesin/kendaraan: 89257, Mesin gergaji GreCon Dimter Opticut 704 L tahun 1999. Mesin telah dibongkar dari lini produksi yang berfungsi. Tidak ada ejektor keluar, mesin perlu diintegrasikan ulang atau diretrofit. Dapat dilihat di lokasi kami. Ledpotvahlofx Afioaa

Kondisi: bekas, Tahun pembuatan: 2004, Fungsionalitas: fungsi terbatas, jenis arus masuk: AC (pendingin udara), kecepatan spindel (maks.): 60.000 rpm, Kami menjual mesin ukir dengan konstruksi khusus dan komponen dari Fanuc. Ledpfsyxp A Sox Afioaa

Kondisi: siap digunakan (bekas), Veeder-Root TLS-350 Modul Termistor Probe 4-Input 330724-001, bekas, dengan tanda penggunaan normal, 100% berfungsi, lingkup pengiriman sesuai foto. Lsdoxaifgopfx Afieaa

Kondisi: bekas, Tahun pembuatan: 2017, de-hu-01 Ledpey Ery Hefx Afijaa

Kondisi: sangat baik (bekas), CATALOGUE NUMBER 7890 Technical specifications: - Track width: 245 mm - Shaft width for edger: 380 mm - Shaft width for multirip saw: 320 mm - Max blade diameter: 350 mm Ledpfx Ajyitxdjfioaa - Blade bore diameter for edger: 80 mm - Blade bore diameter for multirip saw: 65 mm - Max cutting height: 120 mm - Table width with clearance: 900 mm - Table length: 1780 mm – From above: - Pawls/kickback devices - Smooth pressure roller - Pawls - Smooth pressure roller - Insert for short workpieces - Saw shaft - 2 smooth pressure rollers – From below: - Guide rail - Pawls/kickback devices - Track system - Central lubrication - Laser - Stepless feed speed adjustment - Feed motor: 1.1 kW - Main motor: 30 kW - Manual body lifting - Manual saw shaft lifting - Extraction port diameter: 210 mm - Overall dimensions (L/W/H): 1900 x 1500 x 1800 mm - Weight approx.: 2000 kg ADVANTAGES – Made in Germany – Infinitely variable feed speed – Shaft with floating blade for edging – Multirip saw bush included – Laser – Insert for short workpieces – Used multirip saw, in very good condition Net price: 55,900 PLN Net price: 13,300 EUR (depending on the exchange rate of 4.2 EUR) (Prices may vary depending on exchange rate fluctuations)

Kondisi: sangat baik (bekas), CATALOG NUMBER 7670 TECHNICAL DATA - Track width: 340 mm - Shaft width: 400 mm - Max. saw blade diameter for multi-saw: 350 mm - Saw blade bore diameter: 80 mm - Max. cutting height for edger: 100 mm - Max. cutting height for multi-saw: 120 mm - Table width (with clearance): 900 mm - Table length: 1780 mm - From above: - Kickback pawls - Metal, pressure slip roller - Kickback pawls - Pressure slip roller - Shaft with saw blades - Pressure slip roller - Metal, slip, pressure shaft - From below: - Guide rail - Kickback pawls - Track chain - Central lubrication - Infinitely variable feed speed adjustment - Electric height adjustment of saw shaft 0.75 kW + body 1.1 kW - Feed motor: 1.5 kW - Main motor: 22 kW - Floating saw movement: 0.55 kW - Lasers (not working, need servicing) - Extraction nozzle diameter: 210 mm - Overall dimensions (L/W/H): 2200 x 1450 x 2000 mm - Weight: 1925 kg ADVANTAGES – Made in Germany – Shaft with floating saw blade for edging – Additional sleeve for multi-saw included – Used multi-saw, condition: very good Ledpfx Asyk E Hpefijaa Net price: PLN 58,900 Net price: EUR 14,030 (based on 1 EUR = PLN 4.2) (Prices subject to change due to currency fluctuations)

Kondisi: baru, pl-hu-001 Ledpfxsyzulwo Afioaa

Kondisi: baru, Tahun pembuatan: 2022, Cantilever Racking NEW Specifications: - Height: approx. 350 cm - Depth: approx. 137 cm - Length: approx. 402 cm - Cantilever arms: approx. 120 cm - Axle distance: 131 cm - NEW equipment immediately available from stock - 500 kg load capacity per arm - 2250 kg load capacity per upright - Uprights are hot-dip galvanized - Cantilever arms are hot-dip galvanized - Arms are bolted - Arms adjustable in 100 mm increments - Levels: Base + 3 storage levels (4 storage levels in total) The rack consists of: - 04 x uprights, incl. base, approx. 350 cm made of IPE160 - 12 x cantilever arms, approx. 120 cm made of IPE 80 Laodpfjy D Swpox Afioa - incl. all necessary connecting elements and bolts Why choose BLT cantilever racks? - Certified German manufacturer according to DIN EN 1090 – Made in Germany - All specified load capacities for uprights and cantilever arms are statically verifiable at 100% load - All racking systems are delivered hot-dip galvanized. Therefore, they can be installed indoors or outdoors and do not rust as painted systems do. Consistent appearance for many years. - We use legally prescribed hot-dip galvanized bolting systems according to DIN EN 15048-1 - Long-term repurchase guarantee - Upright foot and upright back are welded together, providing additional safety and short assembly times as the feet do not need to be bolted separately to the upright back - Bracing made of angle steel, so no adjustment using turnbuckles is necessary, shortening assembly time - No slotted hole system, thus no weakening of the upright profile Price: €2,356.00 net + legally applicable VAT You will receive an invoice with VAT shown separately. Transport: Delivery can be arranged through our partner shipping company upon request; costs depend on postal code. Assembly: Our trained staff are available to assist you with the professional assembly and disassembly of your facility as needed. Our recommendation: Let us know your requirements... We are happy to assist you in realizing your projects, from planning and ordering to assembly.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2015, de-DE: Weinig Powermat 2400 Vierseitenhobelmaschine mit 7 Spindeln. (Baujahr 2015) 50 mm Spindeln, 6.000 U/min (kein Powerlock) Untere Spindel 15 kW + Außenlager Rechte Spindel 11 kW + Geradeausrichtgerät Linke Spindel 11 kW + Geradeausrichtgerät Obere Spindel 15 kW + Geradeausrichtgerät + Außenlager Untere Spindel 18,5 kW + Profilierlineal Obere Spindel 18,5 kW + Geradeaus- und Profilierlineal Untere Spindel 18,5 kW Geradeausrichtgerät + Außenlager Lasdpoy Auvfsfx Afiea 11 kW Vorschubmotor Automatisches Schmiersystem Elektrisches digitales Anzeigespeichersystem Optional lieferbar mit WEINIG Einzug und Auszug.

Kondisi: bekas, Number of spindles: 5 units Working width: 230 mm Planing height: 120 mm Infeed table length: 2,500 mm Feed motor: 4 kW Feed speed: 5–30 m/min Control: Memory function Weinig Powermat 400 with HSK/Powerlock, axially/radially CNC-controlled ----- Machine is currently being refurbished in our facility! Photos before dismantling and current pictures during the refurbishment process! Laodsyy A Iqepfx Afija Brief summary: ----- 5 spindles at 8,000 rpm 4 x HSK/Powerlock Axial and radial CNC adjustment of the spindles via control system CNC-controlled adjustment and positioning of the feed Table plates with guide knives at spindles 2 and 3 Includes Weinig/Neumann return conveyor system RF 15 Detailed description: ----- Technical specifications: Working width: 20–230 mm Working height: 8–120 mm 1. Tooling station – bottom ----- Motor with brake: 5.5 kW Spindle diameter: 40 mm Speed: 6,000 rpm Tooling circle: 93–145 mm Axial adjustment range: 5 mm Rebate unit MarathonCoating for table insert before 1st lower tooling station 2. Tooling station – PowerLock – right ----- Motor with brake: 7.5 kW Common motor with left tooling station Speed incl. high-performance ball bearings: 8,000 rpm Tooling circle 40 mm below table: 93–200 mm Tooling circle 55 mm below table: 93–180 mm Max. tooling circle for straight knife heads: 163 mm Max. tool diameter behind fence line: 180 mm Max. profiling depth: 35 mm Axial adjustment range: 55 mm CNC-controlled axial spindle adjustment Table plates with guide knives 3. Tooling station – PowerLock – left ----- Motor with brake: common motor with 2nd spindle Speed incl. high-performance ball bearings: 8,000 rpm Tooling circle 40 mm below table: 93–200 mm Tooling circle 55 mm below table: 93–180 mm Max. tooling circle for straight knife heads: 163 mm Max. profiling depth: 35 mm Axial adjustment range: 55 mm Spindle CNC-controlled axially and radially Table plates with guide knives 4. Tooling station – PowerLock – top ----- Motor with brake: 7.5 kW Speed incl. high-performance ball bearings: 8,000 rpm Tooling circle: 93–200 mm Max. tooling circle for straight knife heads: 180 mm Max. profiling depth: 35 mm Axial adjustment range: 40 mm Segmented pressure shoe in front of the top tooling station, adjustable to tooling circle and can be swung away from the tool, spring-mounted. Pressure shoe before and extraction after the top tooling station with electronic digital readouts integrated in the memory function Spindle radial CNC control 5. Tooling station – PowerLock – bottom ----- Motor with brake: 7.5 kW Speed incl. high-performance ball bearings: 8,000 rpm Tooling circle: 93–200 mm Max. profiling depth: 15 mm Axial adjustment range: 35 mm Feed system ----- Frequency-controlled feed, infinitely variable with brake: 4 kW, 5–30 m/min Infeed roller before 1st lower tool pneumatically controlled up/down Durofer profile tooth rollers (Weinig patent) with depth limiter and self-cleaning...

Kondisi: sangat baik (bekas), pl-hu-001 Lodpfx Aoyxr Dxofisaa

Kondisi: baru, Dijual: kontrol daya profesional (SCR) Advanced Energy seri Thyro-A. Perangkat BARU – belum pernah digunakan (stok penyimpanan gudang). Peralatan industri kelas atas untuk instalasi produksi tingkat lanjut. 🔧 Spesifikasi Teknis: Produsen: Advanced Energy Model: Thyro-A 3A 400-350 HF RL3 Tegangan: 400 V Arus: 350 A Keluaran: Relay Out 4A / 250V Tipe: pengendali SCR (thyristor) ⚙️ Aplikasi: - tungku industri - sistem pemanas - otomasi industri - pengaturan daya pada lini produksi 📦 Paket terdiri dari: - 3x modul Thyro-A - housing/radiator industri - kipas pendingin - paket lengkap sesuai foto ✅ Kondisi: Lasdpfx Afeyw T Ipjiea BARU – belum pernah digunakan Kemungkinan ada sedikit tanda penyimpanan. Fungsi 100% normal.