Beli Wm Thermoforming Mesin Termoforming bekas (77.761)

Kondisi: sangat baik (bekas), Tahun pembuatan: 1992, jam operasional: 41.685 h, Technical Data: Rated power, kW: 11.3 Forming area, mm: 475 x 250 Max. film width, mm: 495 Min. film width, mm: 150 Max. feed length, mm: 280 Min. feed length, mm: 50 Max. forming depth/negative, mm: 100 Cycle rate/min - max.: 48 Air consumption/cycle at 6 bar: 100 Nl (compressed air) Heat to be dissipated: with top heating approx.: 10,260 KJ/h with top and bottom heating approx.: 17,715 KJ/h Special features: Hollow-bottom fixture available Nwodpfx Amjq A Um Ro Aef Control cabinet: included

Kondisi: sangat baik (bekas), Tahun pembuatan: 1999, jam operasional: 80.188 h, nomor mesin/kendaraan: 322, Maximum film width 700-800 mm Equipment / further details: - GREINER STACKING / Transfer unit R3 (Ref. no.: 95002.24) // Machine no.: 00020 // Year of construction: 1998 Top and bottom heating Material: PS and PP were processed 450 Ps // 350 Pp Nwjdeq Nn Hcepfx Am Aof The following tools have run on the machine: 8-cavity tool Ø95 and 15-cavity tool Ø73 and 15-cavity tool Ø86 Primarily packaging for the dairy industry was produced. Cycle rates are between 18-25 cycles per minute – depending on cup weight.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2000, nomor mesin/kendaraan: 403, Equipment / Additional Information: Unwinding Device: Roll Holding: single Max. Roll Diameter: 1000 mm Unwinding: automatic Thermoforming Machine: Max. Tool Dimensions: 520 x 330 mm Max. Positive Forming Height: 15 mm Max. Negative Forming Height: 120 mm Film Width: 150 / 760 mm Stroke Length: 50 / 330 mm Max. HIPS Film Thickness: 1.8 mm Lower Table Stroke: 150 mm Clamping Force: 7,500 kg Installed Power Upper Heater: 18.8 kW Installed Power Lower Heater: 14.1 kW Idle Cycle Rate: 40 cycles/min Main Drive Motor Power: 2.2 kW Nwodpfx Ajn D Ew Ijm Aof Film Feed Motor Power: 0.75 kW Operating Air Pressure: 7 kg/cm² Water Consumption at 12°C: approx. 30 l/h Air Consumption at 7 kg/cm²: approx. 125 l/cycle Total Installed Power: 50 kW 9x Tools: Article No. // Tool No. // Cavities // Description / Product: 3599 // 457 // 10 // Vending cup, Capacity = 223 ml 593 // 460 // 8 // Coffee-to-go / Thermo cup, Capacity = 300 ml / 12 oz 509 // 452 // 6 // Ice cream cup, Capacity brimful = 140 ml / Capacity at 6 mm headspace: 120 ml 591 // 459 // 10 // Thermo cup ⌀ 81 / 180 ml 740 // - // - // Standard cup with sealable rim ⌀ 75–120 ml 3589 // 458 // 12 // Coffee-to-go / Thermo cup, Capacity = 80 ml 595 // 456 // 10 // Vending cup, Capacity = 150 ml 210 // - // - // Baking case / technical part / plate or tray 8000 // 455 // - // Granulate cup 180 ml / technical part with flat sealing rim

Tahun pembuatan: 2010, Kondisi: siap digunakan (bekas), de_to_hu_it_lt_001 Nedpfsy Aafrox Am Aswf

Tahun pembuatan: 2022, Kondisi: baru, nomor mesin/kendaraan: AM00222071301-01-01, Manufacturer: AUTOVAK Model: M320 Main material: Stainless steel Dimensions: 3,550 mm x 1,050 mm x 2,300 mm Weight: approx. 1,200 kg Power supply: 3 x 400 V + N + PE / 50/60 Hz Compressed air supply: Pressure min. 6 bar, 500 L/min (without printer) Top film width: 305 - 310 mm Core diameter (top film): 3" Nwodpspfcd Ajfx Am Aef Roll diameter (top film): 400 mm Bottom film width: 322 +/- 1 mm Core diameter (bottom film): 3" Roll diameter (bottom film): 300 mm Cutting size: 130 x 100 mm Draw depth: 15 mm Loading area length: 450 mm Installed power: 15 kW Noise level: Under 72 dB Production speed: 3 ~ 10 cycles/min Equipment: Forming tool for 3 blisters per cycle, each with easy-open corner; Internal dimensions: 105 mm x 75 mm x 15 mm Condition: As new (demonstration model)

Kondisi: sangat baik (bekas), This conveyor-equipped machine is ideal for edge trimming of small carpet samples. Nsdjud Dqkspfx Am Aswf K-50 Diagram The key component of the KS 50 edge bevelling machine is our SE 50 cutting unit. The machine is designed with an adjustable angle range from 0° to 60°. Cutting depth is adjustable from 2 mm to 22 mm. The guide plate for carpet samples can be easily adjusted steplessly from 20 mm to 210 mm. Quick and easy adjustments can be made by releasing the locking lever. The conveyor belt is driven by a three-phase motor. The speed of the cutting motor and the conveyor belt is steplessly adjustable via frequency inverters. Larger carpet pieces are guided manually during processing. Cutting width is 50 mm.

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2024, nomor mesin/kendaraan: DHD/250/100, Fungsionalitas: berfungsi sepenuhnya, tegangan masuk: 400 V, gaya penekanan: 250 t, panjang langkah: 600 mm, kecepatan operasi: 170 mm/dtk, kecepatan mundur: 250 mm/dtk, lebar meja: 1.200 mm, panjang meja: 1.000 mm, lebar pelat tuas: 1.200 mm, panjang pelat penekan: 1.000 mm, panjang total: 2.000 mm, lebar total: 2.700 mm, tinggi total: 4.500 mm, tinggi kabinet kontrol: 1.800 mm, panjang kabinet kontrol: 800 mm, lebar kabinet kontrol: 500 mm, gaya bantalan cetakan: 100 t, langkah bantalan cetakan: 200 mm, sekring listrik: 63 A, tinggi pemasangan: 900 mm, tekanan: 235 batang, Trade fair machine Euroblech 2024 – Location Hamburg. Njdpjttriaefx Am Aewf

Tahun pembuatan: 1990, Kondisi: siap digunakan (bekas), de-to-hu Njdpfx Amjylnz Sj Aswf

Kondisi: diremaj di bengkel (bekas), Maximum forming area: 960 x 660 mm Minimum forming area: 210 x 170 mm Maximum sheet size: 1000 x 700 mm Minimum sheet size: 310 x 210 mm Maximum sheet thickness (manual loading): 12 mm Maximum sheet thickness (automatic loading): 10 mm Maximum tool height: 490 mm Maximum draw depth: 300 mm (pos./neg.) Total connected load approx.: 64.0 kW / 115 A Technical features: - Siemens Simatic S7-300 control system, Panel OP 37 - Air-conditioned control cabinet - Top heater: 5 temperature control circuits via pilot radiators - Bottom heater: 5 temperature control circuits via pilot radiators - Individual emitter control for top heater - Individual emitter control for bottom heater - Parallel clamping frame - Pneumatic motor locking for upper reducing frame - Cylinder locking for lower reducing frame - 4 cooling fans - Adjustable vacuum for undermount via cascade control - Adjustable pre-blow / demoulding via cascade control - Large front access for tool change - Sag control for film via photocell with support air - Automatic tool changing system Undermount: 1. Tool clamping via vacuum 2. Tool change via pneumatically actuated ball rollers Upper plunger: 1. Motorised remote adjustment for stroke limitation 2. Pneumatic quick-release tool clamping system Sheet feeding: - Automatic motorised lifting of the film transport chain - Pneumatic quick-release system for suction plates - Motorised centring of plastic sheets - Separate vacuum pump for textured material Optional retrofitting preheating: - Top heater moves pneumatically, overall field control, emitters can be switched on/off individually via toggle switch Nwjdpfx Amjwf Dvaj Aof - Bottom heater moves pneumatically, overall field control, emitters can be switched on/off individually via toggle switch - Independent temperature control for top and bottom heater via separate controllers in the BE control cabinet (temperature not adjustable via UA operator panel) Optional retrofitting for roll feed: - Cross-cutter and infeed rollers at sheet feeder - Roller stand RO 800

Kondisi: bekas, Tahun pembuatan: 2007, Fungsionalitas: berfungsi sepenuhnya, lebar film: 1.500 mm, en-001 Nwsdpfx Ameft S Eae Asf

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, ILLIG Universal Thermoforming Machine Tipe UA 155 4g solo Data Teknis - Kontrol Siemens - Ukuran material maks.: 1500 x 1250 mm - Luas pembentukan maks.: 1450 x 1200 mm - Tinggi alat maks.: 700 mm - Ketebalan material maks.: 12 mm - Daya pemanas: 96 kW - Daya total: 105 kW Nodoxlzqfspfx Am Ajwf - Pengaman listrik: 160 A - Kapasitas pompa vakum: 250 m³/jam - Kebutuhan udara tekan: 6 bar Perlengkapan - Pemanas atas dengan kontrol 5 zona HTS (700ºC) - Pemanas bawah dengan kontrol 5 zona HTS (500ºC) - Kipas pendingin D06 - Meja kaskade - Kaskade vakum - Punch atas - Termasuk pendingin ILLIG dan alat tempering ILLIG

Kondisi: bekas, Tahun pembuatan: 1998, ILLIG universal forming machine UA 155 4G + BE 155 P FHZ Technical specifications: - Maximum material size: 1500 x 1250 mm - Maximum forming area: 1460 x 1210 mm - Maximum tool height: 600 mm - Maximum material thickness: 12 mm Forming station: - Schleicher P03 control system - Automatic setup and removal function - Top heating: ceramic heater with 5-zone control - Bottom heating: ceramic heater with 3-zone control - Storage of programs and heating settings - Clamping frame with quick-change system - Upper frame parallel, longitudinal beams for use with fixed format frames - Lower clamping frame for frame installation from below, central clamping via electric motor Nwodpfx Ajxlzrcom Aof - Lower table pneumatic with rapid/traverse speed adjustable in percentage - Upper plug assist with rapid/traverse speed adjustable in percentage - Pre-blowing automatic, adjustable in percentage - Pre-vacuum adjustable in percentage - De-moulding automatic, adjustable in percentage - Sheet sag control via light barrier with supporting air - 6-fold cooling fan - Large front opening for tool change - Vacuum pump Sheet feeding: - Automatic sheet feeding device - Final heating in feeding for final or pre-heating of sheets - Motorized sheet lifter - Motorized adjustable sheet positioning - Motorized transport lifter - Motorized transport width adjustment

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, Mesin DU 1500 x 1000 x 620 T7 No. 98 15254 Ukuran pelat: 1000 x 800 mm Kedalaman tarik: 620 mm Tahun pembuatan: 1998 Nedpfexmgvcjx Am Aewf Arus nominal: 238 A Daya terpasang: 164,5 kW Sistem kontrol: Siemens OP 37 Perlengkapan: • Mesin pengisi • 6 kipas pendingin • Punch atas • Kontrol kelenturan film • Bingkai penjepit yang dapat disesuaikan secara motorik • Flash emitter • Pirometer pemanas • Pirometer pendingin

Kondisi: bekas, Fungsionalitas: belum diuji, This Illig SB 74 D is being offered for sale; it is suitable for skin packaging, but not for blister applications. Nwodpfxswpvbpj Am Aof Please request technical specifications separately.

Kondisi: diremaj di bengkel (bekas), Top heating with small individual radiators via toggle switch Nwjdpfxjfug Anj Am Aof Bottom heating with large radiator Top die system Protective grid 4 D05 cooling fans Pre-blow and demolding automation

Kondisi: diremaj di bengkel (bekas), Fungsionalitas: berfungsi sepenuhnya, Maximum forming area: 960 x 660 mm Minimum forming area: 269 x 444 mm Maximum sheet thickness (manual feed): 12 mm Maximum sheet thickness (automatic feed): 10 mm Maximum tool height: 450 mm Year of manufacture: 2000 Nwedpewf Dtxofx Am Ajf Technical equipment of forming station UA 101 L: - Siemens control system with swiveling operator panel - Motorized travel movement of upper and lower heaters via rocker arm - Upper heater with 5 temperature control circuits using pilot burners - Lower heater with 3 temperature control circuits using pilot burners - Height-adjustable upper heater - Upper punch unit - Parallel clamping frame - Automatic window plate adjustment for lower frame - Automatic window plate adjustment for upper frame - Vacuum for lower table adjustable via cascade control - Pre-blow/demolding adjustable via cascade control - 4 cooling fans - Front opening for tool change pneumatically locked - Sag control for film - Pre-blow control for film - Preparation for vacuum at upper punch - Tempering connection - Automatic tool change system, major setup - Vacuum pump Technical equipment of feeder BE 101 L: - Upper and lower preheating - Motorized travel movement of upper and lower heaters via rocker arm - Upper heater with 5 temperature control circuits using pilot burners - Lower heater with 3 temperature control circuits using pilot burners - Height-adjustable upper heater - Motorized parallel sheet transport - Sheet transport via spiked chain - Counter-guide for sheet via rollers - Automatic transport width adjustment - Motorized plate lifter with automatic tool clamping - Mobile plate loading cart Options (price on request): - Pyrometer in upper heater for temperature measurement on the film - Retrofit for roll processing

Kondisi: diremaj di bengkel (bekas), Fungsionalitas: berfungsi sepenuhnya, Plate size: 1250 x 1500 mm Forming area: 1200 x 1460 mm Draw depth: 700 mm Nwjdpfx Aewf Ea Tjm Asf If you require further details or a quotation, please feel free to contact us.

Kondisi: diremaj di bengkel (bekas), Fungsionalitas: berfungsi sepenuhnya, Technical data: - Maximum material size: 2500 x 1500 mm - Maximum forming area: 2450 x 1450 mm - Maximum tool height: 600 mm - Maximum material thickness: 12 mm Equipment: Forming station - Schleicher P03 control system - Automatic setup function - Top heating with ceramic heaters (500W) and 4-zone control - Individually selectable top heating elements, including lowering feature - Bottom heating with ceramic heaters (300W) and 4-zone control - Individually selectable bottom heating elements, including lowering feature - Storage for programs and heating settings - Clamping frame with quick-change system - Parallel upper frame, longitudinal beams for fixed format frame operation Nwodpfx Amjwf Eb Rs Asf - Lower clamping frame for bottom frame installation, central clamping via electric motor - Lower table pneumatically adjustable with rapid/creep speed in 15 steps via control panel - Upper punch with rapid/creep speed adjustable in 7 steps - Vacuum pump with cascade control adjustable in 15 steps via control panel - Pre-blow feature adjustable by percentage - Pre-suction feature adjustable by percentage - Automatic demoulding feature adjustable by percentage - Sheet sag control via photoelectric sensor with support air - 8-way cooling fan with spray nozzle cooling - Large front opening for tool change Feeding system - Automatic sheet feeding device - Centering table for precise positioning of sheets in the feeder - Motorized sheet lifter - Motorized sheet positioning adjustment - Motorized transport lift - Motorized transport width adjustment

Tahun pembuatan: 1996, Kondisi: siap digunakan (bekas), Two TETRA LAVAL 3000 thermoforming machines are available, power connection: 30A, voltage: 380V, year of manufacture of machine 1/2: 1995/1996. Nwjdpjgbft Refx Am Aof

Tahun pembuatan: 1991, Kondisi: siap digunakan (bekas), Discharge length: 225-320 mm, max. package width: 260 mm, compressed air consumption: 500 l/min, length: 5300 mm, width: 1100 mm, height: 2200 mm, without tools. Nwsdpfomn S Hgjx Am Aef

Tahun pembuatan: 1985, Kondisi: siap digunakan (bekas), Max. discharge length: 320 mm, max. package width: 260 mm, compressed air consumption: 500 l/min, length: 5,500 mm, width: 1,200 mm, height: 2,000 mm, without tools. Nwjdpfx Amjmn S Hko Ajf

Kondisi: diremajakan ulang (bekas), Tahun pembuatan: 2017, Completely overhauled in 2017, with documentation. Nsdpfx Aowqd Adem Ajwf

Tahun pembuatan: 2022, Kondisi: siap digunakan (bekas), A small table-top vacuum machine (vacuum chamber machine) from Italian Pack is available. Chamber dimensions X/Y/Z: 370mm/420mm/180mm, vacuum pump capacity: 16 m³/h, max. operating time per day: 5h. Documentation is available. An on-site inspection is possible. Nwedpowt A U Rofx Am Aef

Kondisi: siap digunakan (bekas), Tersedia mesin sealer tray otomatis penuh VC 999 dengan desain inline. Kedalaman tray: 120mm, dimensi alat 1-cavity: 350mm/460mm, dimensi alat 2-cavity: 350mm/222mm, dimensi alat 4-cavity: 350mm/145mm, kapasitas pengemasan: 8-12 siklus/menit, dimensi mesin X/Y/Z: sekitar 4500mm/1000mm/1800mm, berat: sekitar 900kg. Kunjungan lokasi dapat dilakukan. Nsdpfoxph N Aex Am Aowf

Tahun pembuatan: 2008, Kondisi: siap digunakan (bekas), A large-format vacuum thermoforming machine by Geiss is available. Sheet cut size min.: 1100mm/1300mm, max. sheet cut size: 2100mm/1800mm, max. forming depth: 620mm. Additional sheet format 1: min.: 850mm/750mm, max.: 1850mm/1250mm. Additional sheet format 2: min.: 1050mm/800mm, max.: 2050mm/1300mm. Includes a separate loading unit with pneumatic sheet separation equipment, an automatic aligner for sheet cuts in both longitudinal and transverse directions, a pneumatic pusher for removing formed parts from the feeder unit, fully automatic central lubrication for the loading unit, several interchangeable pallets for window sheet sets, a storage rack for window sheets, as well as a vacuum control system with four independently adjustable flow stages and an air treatment system. Documentation is available. Inspection on site is possible. Nwsdpfx Amewih Are Asf