Beli Wmw Gotha Swu 250 I bekas (62.337)

Kondisi: bekas, en Dodpfx Ageu Ng Nps Decg

Kondisi: bekas, Tahun pembuatan: 1981, Technical details: Pressing force: 250 t Ram stroke: 36...126 mm Throat depth: 400 mm Ram adjustment: 110 mm Ram surface area: 630 x 500 x 100 mm Installation height: 400 mm Table size: 1000 x 750 x 100 mm Table height above floor: 1000 mm Total power requirement: 23.0 kW Approx. machine weight: 13.5 t Dcedpfx Agou Nfkle Djg Control cabinet dimensions (LxWxH): 1.1 x 0.7 x 1.3 m Approx. machine dimensions (LxWxH): 3.0 x 1.3 x 3.3 m Additional features: - Operation via two-hand control stand with foot pedal - 4 base plates Ø 220 mm

Kondisi: bekas, Technical details: Dsdpfx Ageu N Ddwe Docg Press force: 250 t Stroke: Continuous idle stroke 40 mm Ram stroke: adjustable 36 – 126 mm Ram adjustment: 110 mm Ram clamping area: 630 x 500 mm (LxW) Bolster area: 1000 x 750 x 100 mm Distance table/ram: 400–526 mm Pass-through opening in table: 400 x 360 mm Operating pressure: 0.6 MPa Ejector stroke: 63 mm Throat depth: 400 mm Total power requirement: approx. 20.0 kW Dimensions control cabinet (LxWxH): 1.2 x 0.65 x 2.1 m Machine dimensions approx. (LxWxH): 2.9 x 1.2 x 3.4 m - Two-hand operation - Operator panel Accessories: - Base plate 2200 x 1500 x 40 mm

Kondisi: bekas, Tahun pembuatan: 1979, en: Technical details: Pressing force: 250 t Ram stroke: 40–160 mm Throat depth: 545 mm Ram adjustment: 110 mm Table size: 1250x800x100 mm Maximum distance between table and ram: 670 mm Drawing force: 16 t Table height above floor: 1000 mm Ram clamping surface: 900x670x100 mm Clearance between uprights: 500x400 mm Total power requirement: 23 kW Machine weight approx.: 16.6 t Machine dimensions: 2.8x1.4x3.7 m Control cabinet dimensions (LxWxH): 1.15x0.6x2.1 m Drawing device: Ejector and blank holder force each 16 t Table with 4 parallel T-slots (1250x800x100 mm) Ram plate with 4 radial T-slots Dedou Nfinjpfx Ag Decg Accessories: - Steel plate 1170x860x80 mm

Kondisi: baik (bekas), Tahun pembuatan: 1975, Tekanan: 250 t Jangkauan: 400 mm Langkah: 30...140 mm Ukuran meja: 1000 x 750 mm Lubang tembus di meja: 360 x 400 mm Luas pelat tekan: 630 x 500 mm Penyesuaian pelat tekan: 110 mm Kebutuhan daya total: 18 kW Dodpfx Agey Iwqvo Docg Berat mesin sekitar: 16 t

Kondisi: hampir baru (bekas), Tahun pembuatan: 1985, nomor mesin/kendaraan: 38754, Fungsionalitas: fungsi terbatas, jam operasional: 200 h, gaya penekanan: 250 t, Mesin pelengkung plat ini dipasang baru pada tahun 1989 dan hanya digunakan selama 200 jam, setelah itu tidak pernah digunakan lagi. Bagian mekanis berfungsi penuh dan dalam kondisi sempurna, namun panel listrik memerlukan perbaikan. Gaya Tekan: 250 mp (metrik ton) Panjang Permukaan Kerja: 5600 mm Lebar Permukaan Kerja: 400 mm Tinggi Permukaan Kerja: 100 mm Dcedeykl Iaopfx Ag Dog Berat: Sekitar 37.000 kg Ukuran Press (PxLxT): 5700 x 3150 x 5200 mm

Kondisi: bekas, Detail teknis: Tekanan: 160 t Langkah ram: 32...140 mm Jumlah langkah: 50 langkah/menit Dodeu N Dfhjpfx Ag Docg Jarak jangkauan: 400 mm Ketinggian pemasangan: 400 mm Penyesuaian slider ram: 100 mm Ukuran meja: 1000x750 atau pelat penjepit mm Luas ram: 850x630 mm Lubang pin: 400x360 mm Total kebutuhan daya: 15,5 kW Berat mesin kira-kira: sekitar 10,5 t Dimensi P-L-T: Lemari listrik 1,06x0,6x2,0 m Dimensi P x L x T: P:2,9 x L:1,25 x T:3,3 m - Mode single dan/atau stroke kontinu tersedia - 2 pelat penjepit (1200x760x90 mm dan 1200x760x70 mm, lubang pin Ø=300 mm) - Pengoperasian dengan kaki dan tangan tersedia - Pemeriksaan terakhir dilakukan tahun 2006 - 80A; udara tekan 6kp/cm²; kapasitas oli sekitar 30 liter termasuk.

Kondisi: bekas, Tahun pembuatan: 1971, Technical details: Drilling capacity in steel (diameter): 16 mm Throat depth: 250 mm Quill travel: 125 mm Spindle taper: MT 2 Spindle speed: 350 - 2000 rpm / 8 steps Table clamping surface: 280 x 355 mm Rotating table: yes Drill table adjustment: 520 mm vertical Distance spindle nose to table (max): 600 mm Column diameter: 110 mm Total power requirement: 1.1 kW Machine weight approx.: 272 kg Machine dimensions approx. (LxWxH): 0.6 x 0.5 x 1.8 m Equipment: - Drill chuck 13 mm Dedpsu Idhmofx Ag Dscg - Twist drill 10 mm with 45° cross-ground tip - Machine vice

Kondisi: bekas, Technical details: Dcodpfx Aou Nurxsg Deg Mounting diameter: 310 mm Weight: 216 kg Dimensions (L x W x H): 0.5 x 0.2 x 0.9 m Connecting rod for mechanical press PEE 250 Trapezoidal thread Ø 146 x 14 mm

Kondisi: baik (bekas), Tahun pembuatan: 1985, nomor mesin/kendaraan: 1076-85, offer 24303 Technical Specifications: - Table size approx. 630 x 340 mm - Axis travel ranges: - X (longitudinal) approx. 400 mm Dcedpfot Dxwgex Ag Deg - Y (transverse) approx. 220 mm - Z (vertical) approx. 400 mm - Max. distance spindle – table surface: 400 mm - Tool holder: SK 40 - Spindle speeds, adjustable in 16 steps: 45 – 2240 rpm - Feed rate, X; Y; Z axes: 6.3 – 1250 mm/min - Drive: 400 V / 8.5 kW - Space requirement approx. W 1450 x H 1900 x D 1450 mm - Weight approx. 1600 kg - Equipped with: - 3-axis digital display HEIDENHAIN - Tilting vertical milling head - Horizontal spindle counter-support - Machine vice

Kondisi: baik (bekas), Tahun pembuatan: 1982, jumlah rol pelurus: 13, ketebalan lembaran (maks.): 10 mm, Tahun pembuatan: 1982/2024 Lebar plat: 2000 mm Ketebalan plat - maks.: 10 mm Ketebalan plat - min.: 3 mm Dcjdpfxsy Ixpto Ag Dog Jumlah rol perata: 13 rol Diameter rol perata: 145 mm Kecepatan perataan: 16 m/menit Panjang balok: 2330 mm Jarak tengah rol perata: 150 mm Diameter rol penyangga: 290 mm Motor penggerak utama: 30 kW Berat: 32 t Informasi tambahan - Jumlah rol penyangga: 21/24 - Jumlah penyangga (atas/bawah): 3/3 - Kecepatan angkat travers: 0,71 mm/detik - Jarak angkat travers: -18 mm hingga +42 mm - Maks. sudut ayun travers bawah: 8 mm

Kondisi: baik (bekas), Tahun pembuatan: 2010, Mesin dalam kondisi baik. Suku cadang yang ditunjukkan dengan tangan tidak termasuk. Dodpox N Atfjfx Ag Djcg

Kondisi: bekas, Tahun pembuatan: 1989, tech-details-ubr-20x1600 Dcjdpfxoyvfy Tj Ag Dog

Kondisi: bekas, Technical Details: Turning length: 630 mm Swing diameter over slide rest (rear slide rest): 250 mm Center height over bed: 270 mm Center distance: 900 mm Spindle bore: 26 mm Stepless speed range: 1.8 – 450 rpm Return speed: 23 / 32 / 46 / 370 / 510 / 740 rpm Cross feed: 0.07 – 1.11 / 36 steps mm/rev Longitudinal feeds: 0.063 – 0.63 / 12 steps mm/rev Tailstock quill taper: MK 5 Quill stroke: 250 mm Dcsdpfx Aevbh N Rjg Dsg Total power requirement: 7.0 kW Machine weight approx.: 3.9 t Machine dimensions approx. LxWxH: 3.2 x 1.2 x 1.8 m Application: Primarily for back turning and relief grinding of cutting tools (especially hobs with or without thread). Back turning and relief grinding is possible from the front, from the rear, and in the axial direction of the machine. The main drive is via an 8-step manually shifted gearbox. The feed gearbox is configured as a 12-step manually shifted gearbox. Swivel range of the rear slide = 360°. Swivel range of the cross slide = 360°. Equipment: - Faceplate Ø 210 mm with fixed center - Fixed center in tailstock - Supplied with 4 machine feet - 3-jaw chuck Ø 250 mm - internal.

Kondisi: bekas, Tahun pembuatan: 1979, Technical Details: Swing diameter over bed: 540 mm Turning length: 630 mm Distance between centers: 900 mm Center height over bed: 270 mm Center height over sub-slide: 138 mm Swing diameter over sub-slide: 250 mm Longitudinal travel: 700 mm Cross travel: 80 / 75 mm Spindle speeds: 1.8 - 450 rpm, 8-step, stepless Clamping diameter: 26 mm Feed range X-axis: 12 steps / 0.063 - 0.63 mm/rev Feed range Y-axis: 36 steps / 0.070 - 1.11 mm/rev Tailstock quill: MK5 Tailstock quill stroke: 250 mm Total power requirement: 7.0 kW Machine weight approx.: 3.76 t Dsdpfxevbhv Ro Ag Dscg Machine dimensions approx. (LxWxH): 3.2 x 1.2 x 1.8 m Application: Primarily used for back-turning and relief grinding of cutting tools (especially hobbing cutters with and without thread pitches). Back-turning and relief grinding can be performed from the front, rear, and along the machine axis. Main drive through an 8-speed manual gearbox. Feed gearbox is a 12-speed manual gearbox. Swivel range of sub-slide = 360° Swivel range of cross-slide = 360° Chuck is a cone plate Ø 200 mm with MK5 Equipment: Mandrel Ø 49.5 x 400 mm ARBAH-L 3+1 measuring system FRENIC 5000G11 inverter 3-jaw chuck Ø 250 mm in good condition.

Kondisi: bekas, en: Technical details: Diameter: 250 mm Passage: Ø 80 mm Width: 106 mm without flange Machine weight approx.: upon request kg Dimensions: Ø 250 x W: 140 mm Dcedpfx Asu Nlatog Dog Three-jaw chuck made of steel - incl. chuck key - incl. 2 sets of 3 jaws - Flange: size Ø 250 x 26 mm; attachment with 4 clamping bolts on bolt circle Ø 170 mm fr: Détails techniques : Diamètre : 250 mm Alésage : Ø 80 mm Largeur : 106 mm sans bride Poids de la machine env. : sur demande kg Dimensions : Ø 250 x L : 140 mm Mandrin à trois mors en acier - incl. clé de mandrin - incl. 2 jeux de 3 mors - Bride : taille Ø 250 x 26 mm ; fixation par 4 boulons de serrage sur cercle de vissage Ø 170 mm nl: Technische gegevens: Diameter: 250 mm Doorgang: Ø 80 mm Breedte: 106 mm zonder flens Machinegewicht ca.: op aanvraag kg Afmetingen: Ø 250 x B: 140 mm Drieklauwplaat van staal - incl. sluitingssleutel - incl. 2 sets van 3 klauwen - Flens: maat Ø 250 x 26 mm; bevestiging met 4 spanbouten op steekcirkel Ø 170 mm

Kondisi: bekas, Technical details: Sheet width: 1080 mm Sheet thickness: 1.25 mm Frame opening: 1200 mm Dimensions (LxWxH): 1.9 x 0.6 x 0.9 m Additional features: Dcedju Icdyspfx Ag Dsg 2x bending rollers: - Ø 63 x 1080 mm - the top roller can be swiveled out - the bottom roller has an adjustment travel of 12 mm - manual drive via hand crank 1x running roller: - Ø 63 x 1080 mm - free-running - adjustment travel approx. 5 mm

Kondisi: bekas, Three-jaw chuck, three-jaw lathe chuck Dodeduab Ispfx Ag Decg - Chuck size: Ø 250 mm - Includes one set of hard reversible jaws - Bore: 81 mm - Recess: Ø 210 mm - Bolt circle: Ø 230 mm - Weight: 19 kg

Kondisi: baik (bekas), Sheet width: 1070 mm Sheet thickness: 1.6 mm Roller diameter - top: Ø 70 mm Roller diameter - bottom: Ø 70 mm Approx. machine weight: Dimensions (LxWxH): 1.9 x 0.6 x 1.12 m - The upper roller is swing-out Dcsdjg Rypmjpfx Ag Djg - Manual operation via hand crank -

Kondisi: baik (bekas), Tahun pembuatan: 1984, Max. wheel diameter: 250 mm Wheel width: 275 mm Module (max.): 6 Machine weight: approx. 5.5 t The gear hobbing machine ZFWZ 250 is suitable for the efficient production of all indexable cylindrical gears such as: - Straight and helical spur gears, worm wheels and worms, splined shafts, keyed shafts, broached profiles, chain and ratchet wheels, as well as conical and crowned straight and helical gears. Change gears and milling accessories Technical data: - Max. workpiece diameter: 250 mm - Max. module: 6 mm - Max. axial feed travel: 275 mm - Max. tangential feed travel: 100 mm - Max. helix angle: 45 degrees - Max. cutter diameter: 145 mm - Max. cutter length: 170 mm - Min. clamping surface (table): 195 mm - Max. clamping surface (table): 470 mm Dsdpjv T Nqajfx Ag Docg Performance Cutter speeds - Stepped in 2 ranges: 56 ... 250 rpm - (Standard version): 90 ... 400 rpm - Infinitely variable in 2 ranges: 63 ... 180 rpm - (Special version with DC motor): 140 ... 400 rpm Weight - Net machine weight: approx. 5,000 kg - Electrical cabinet: approx. 800 kg - Hydraulic unit + coolant tank + chip conveyor: approx. 700 kg Overall dimensions (with oil mist filter) - Length: Standard version: 3,950 mm DC drive: 3,450 mm (or 3,350 mm as per table) - Width: 3,300 mm - Height: Machine: 1,980 mm Machine with DC drive: 2,150 mm Electrical cabinet: 2,200 mm

Kondisi: baik (bekas), Tahun pembuatan: 1994, Tekanan: 250 t Kedalaman tenggorokan: 360 mm Ukuran meja: 1250 x 630 mm Diameter meja: 250 mm Dcodpfx Agey Iwrae Deg Luas penjepit pelatuk: 850 x 450 mm Tinggi pemasangan: 800 mm Langkah piston: hingga 500 mm Diameter piston: 400/360 mm Kecepatan pelatuk turun: 200 mm/detik Kecepatan pelatuk naik: 110 mm/detik Kebutuhan daya total: 20,5 kW Berat mesin sekitar: 8 t

Kondisi: sangat baik (bekas), Tahun pembuatan: 1986, Diameter pembubutan maks. di atas tempat tidur: 300 mm Diameter pembubutan maks. di atas selip belakang: 250 mm Panjang pembubutan maks.: 630 mm Dcedoyt Spvspfx Ag Dog Jarak antara senter: 1000 mm

Kondisi: bekas, en-001 Dcsdpfx Ageu Ic Ewe Djg

Kondisi: bekas, Tahun pembuatan: 1980, Technical details: Pressing force: 400 t Stroke: 40 - 140 mm Continuous strokes/min: 32 Throat depth: 400 mm Installation height min/max: 450/590 mm Ram adjustment: 125 mm Table size: 1250 x 750 mm Height above floor: 1130 mm Total power requirement: approx. 31.5 kW Machine weight approx.: 23.0 t Machine dimensions (LxWxH): 3.7 x 1.7 x 3.9 m Control cabinet dimensions (LxWxH): 1.0 x 0.7 x 2.1 m Additional features: - Clamping plate (LxWxH): 1260 x 760 x 100 mm - With drawing device, force 250 kN, stroke approx. 83 mm - Operation via control panel - No UVV (accident prevention regulations) Djdju N A Uuopfx Ag Decg - As is

Kondisi: bekas, Technical details: Machine weight approx.: 160 kg Machine dimensions (LxWxH) approx.: 0.58 x 0.50 x 0.3 m Swiveling: no Rotary movement: 360 degrees Application: For auxiliary tasks, e.g., marking out divisions - Dividing head with clamping chuck Ø 370 mm with external 4-jaw clamping - Pitch circle with 15/16/17/18/19/20 divisions, 360°; 360° rotation Dcedpfx Ageu N E Dxj Dog - 360° rotation via radial scale