Beli Yangli Group Pers Eksentrik bekas (25.133)

Kondisi: baru, Tahun pembuatan: 2024, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 20250106, masa garansi: 12 bulan, lebar total: 685 mm, tinggi total: 1.665 mm, panjang total: 1.000 mm, jenis arus masuk: AC (pendingin udara), berat keseluruhan: 350 kg, lebar dalam: 520 mm, panjang dalam: 750 mm, tinggi dalam: 660 mm, tegangan masuk: 230 V, Perlengkapan: dokumentasi / manual, kabin, pencahayaan,

Kondisi: baru, Tahun pembuatan: 2022, nomor mesin/kendaraan: 2918542, Neue Maschine. Iasdpfei A Ilpjx Am Reu

Kondisi: baru, Tahun pembuatan: 2024, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 20250107, panjang total: 2.000 mm, lebar total: 1.900 mm, tinggi total: 3.050 mm, berat keseluruhan: 1.000 kg, tegangan masuk: 400 V, jenis arus masuk: tiga fasa, frekuensi input: 50 Hz, kapasitas pemanasan: 24 kW (32,63 hp), masa garansi: 12 bulan, berat muatan maksimum: 700 kg, berat benda kerja (maks.): 700 kg, diameter sangkar: 1.390 mm, Single-stage cleaning machine Iasdpjvvuzcefx Am Rsu Operating principle, machine with lift door The cleaning machine’s tank is filled manually with tap water (optionally via the automatic refill valve AR-2) and is heated by heating elements and thermostat settings. The time settings for the phases—washing, dripping (optionally drying and steam extraction)—are adjusted via the "PROCESS TIMER." Parts are placed on the loading grid or loading trolley and pushed into the cleaning chamber. For heavy loads, a conveyor belt (MIU / AIU) can optionally be installed to transport the items into the cleaning cabin. The lift door is closed, the machine started, and the wash pump delivers the cleaning solution onto the objects to be cleaned via the rotating spray systems. The rotation of the upper and lower spray arms is powered by the reaction force of the jet nozzle located at one end of the spray arm. The rotational speed can be adjusted using a screw in the reaction nozzle. Optionally, the rotation of the upper spray arm can be motorized and the spray arms can be fitted with nozzles. After the wash cycle, a brief dripping phase follows, during which the used cleaning solution is returned through filter baskets to the wash tank. Optionally, the fluid from the wash stage can be filtered using a filter unit (EFG-6 or PP197). An additional stage, such as pre-washing or rinsing, is optionally possible via stationary spray pipes NS-2 / NS-TEMP. In this case, parts are rinsed with fresh water (cold or heated), which flows into the drain through the drain valve. After the cleaning process, the parts can optionally be dried using a drying unit. When the cleaning process is complete, the lift door is left ajar for steam extraction. The steam from the cleaning cabin is either extracted using the steam extractor (DF-250S) or can be condensed and returned to the tank using the steam condenser (FX6002). Both accessories are optional and are not part of the machine’s standard equipment. Once the steam extraction time has elapsed, the lift door opens fully and the cleaning cycle is complete. Optionally, the lift door can be equipped with a safety edge, which automatically stops the door if an object is detected in the doorway. The cleaned components can be removed from the cleaning chamber onto a loading surface or loading trolley.

Kondisi: baru, Tahun pembuatan: 2024, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 20241202, tinggi total: 860 mm, berat keseluruhan: 320 kg, panjang total: 1.170 mm, lebar total: 1.170 mm, jenis arus masuk: tiga fasa, kapasitas tangki: 150 l, kapasitas tangki yang dapat digunakan: 100 l, tegangan masuk: 400 V, lebar benda kerja (maks.): 170 mm, tinggi benda kerja (maks.): 170 mm, diameter luar: 170 mm, panjang benda kerja (maks.): 170 mm, lebar dalam: 260 mm, daya: 2,2 kW (2,99 hp), frekuensi input: 50 Hz, masa garansi: 12 bulan, kapasitas angkut: 60 kg, Perlengkapan: kecepatan rotasi dapat diubah tanpa batas, The Vibra-Line DK rotary vibrator impresses with an open, domed container offering a capacity of 150 liters. This model is equipped with a pneumatically operated discharge automation and a sound-insulated lid, ensuring convenient and quiet operation. Iedpfx Asviu Ehem Rsau The U-shaped inner container features a 22 mm thick polyurethane (PU) lining, providing exceptional resistance to process wear. The 150-liter capacity allows for loading approximately 50 to 100 liters of metal parts per batch, depending on their shape and size. The wide drum and low discharge height significantly facilitate unloading of the processed parts. Machine control is managed via a frequency inverter with stepless speed regulation, operated through a 5.5-inch touchscreen. Process times, languages, and speeds can be adjusted quickly and easily here. Additionally, the control system manages two external ports, which can be used for process water and compound dosing. The Vibra-Line 150DK rotary vibrator is delivered as a plug-and-play solution and only requires a 16-amp CEE plug, 4 bar compressed air, and a water connection for commissioning. Our equipment complies with EU machinery/equipment directives and is supplied with a manufacturer’s declaration of conformity and CE marking.

Kondisi: baru, Tahun pembuatan: 2024, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 20250108, tinggi total: 2.200 mm, berat keseluruhan: 700 kg, panjang total: 1.700 mm, lebar total: 1.300 mm, jenis arus masuk: tiga fasa, berat benda kerja (maks.): 75 kg, kapasitas tangki: 120 l, kapasitas tangki yang dapat digunakan: 60 l, tegangan masuk: 400 V, kecepatan rotasi (min.): 50 rpm, kecepatan rotasi (maks.): 180 rpm, daya: 4 kW (5,44 hp), arus masuk: 16 A, masa garansi: 12 bulan, Perlengkapan: kecepatan rotasi dapat diubah tanpa batas, The Turbo-Line 120 “S” model features a stainless steel discharge chute, which is mounted directly onto the deburring machine. When the bowl is lowered, chips pass through a screen, while the parts to be deburred remain on top. Isdpfxjvvu Sno Am Roau This Turbo-Line machine is equipped with a 120-liter drum with vertical, straight sides and a separate bottom section which rotates at an adjustable speed, typically between 115 and 135 rpm, but can be set anywhere from 50 to 180 rpm. During operation, the abrasive media inside the bowl create a uniform, spiral motion reminiscent of a twisted sausage. All areas of the machine that come into contact with the product, including the drum and base, are coated with at least 26 mm of yellow polyurethane (PU) to ensure long service life. The 120-liter process container can handle up to 50-60 liters of product per batch, depending on the shape and size of the parts. Deburring parameters such as time and speed are individually set via a manual touchscreen controller. Water and compound are added through a manually adjustable ball valve, which is included in the scope of delivery. Finished products are discharged by tilting the bowl, a process controlled via the touchscreen. The discharge speed is also adjustable on the touchscreen via the frequency inverter.

Kondisi: baru, Tahun pembuatan: 2024, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 20241204, tinggi total: 905 mm, berat keseluruhan: 550 kg, panjang total: 1.200 mm, lebar total: 1.200 mm, jenis arus masuk: tiga fasa, kapasitas tangki: 220 l, kapasitas tangki yang dapat digunakan: 110 l, tegangan masuk: 400 V, lebar benda kerja (maks.): 200 mm, tinggi benda kerja (maks.): 200 mm, diameter luar: 200 mm, panjang benda kerja (maks.): 200 mm, kecepatan rotasi (min.): 1.400 rpm, lebar dalam: 240 mm, daya: 4,5 kW (6,12 hp), frekuensi input: 50 Hz, masa garansi: 12 bulan, kapasitas angkut: 100 kg, Maize Dryer Vibra-Dry DK 200 WT with Pneumatic Discharge and Steel Base. For sale: High-quality maize/cereal dryer Vibra-Dry DK 200 WT with a working volume of 220 liters. This versatile machine is ideal for drying and polishing with crushed maize granulate, resulting in a flawless and glossy finish. Key Features: Operating Principle: Moist parts are automatically transported from the rotary vibrator to the dryer via the separation table. Pneumatically Controlled Outlet Valve: Enables automatic discharge after drying. Coating: Interior walls as well as infeed and discharge areas feature a durable 2-component PU coating for reduced wear and noise levels. Temperature Control: Adjustable between 30°C and 50°C via manual control panel, with stepping for 0%, 50%, and 100%. Automatic temperature maintenance by toggling the heating system. Technical Details: Ijdpfx Asvi Nhdjm Rjau Fill with approximately 10-15% crushed maize granulate (25 kg recommended). Commissioning: Maize grains GM 16 or GM 20 must be used. This machine is reliable, robust, and ideal for operations that prioritise quality and efficiency. Enquire now!

Kondisi: baik (bekas), Tahun pembuatan: 1986, Fungsionalitas: berfungsi sepenuhnya, Daya tekan: 1250 kN, Jumlah langkah: 55 min-1, Penyesuaian ram: 75 mm, Langkah: 20-120 mm, Daya motor: 11 kW, Tegangan: 380 V, Berat mesin: 8,6 t, Jarak lengan: 340 mm, Area pemasangan ram: 620 x 300 mm, Area pemasangan meja: 650 x 1000 mm, Kopling hidrolik Ortlinghaus dengan rem ganda, Iedpfx Amoxxa Aao Rjau Pengoperasian dengan dua tangan, Perbaikan pada ram telah dilakukan secara profesional.

Kondisi: baik (bekas), Tahun pembuatan: 1977, 1 unit excenter press bekas Iaodpswxxr Aefx Am Reu Merek: Helmerding Tipe: EL 35 B Tahun pembuatan: 1977 No. mesin: 5182 Daya tekan: 350 kN Langkah dapat diatur: 12 - 80 mm Ram dapat diatur: 70 mm Penurunan ram per menit: 110 Meja dapat diatur: 150 mm Jarak aman: 150 mm Jarak sisa: 50 Berat: 2050 kg Dilengkapi dengan Katup keselamatan untuk mesin press

Kondisi: bekas, Tahun pembuatan: 1962, 102d6e67 Iedpfx Asyq Smism Rsau

Kondisi: bekas, Tahun pembuatan: 1962, 01 Iajdpfxsyq Sl Sj Am Rsu

Kondisi: bekas, Tahun pembuatan: 1961, 1 Iasdpfx Amovuuc Rj Rou

Kondisi: bekas, Tahun pembuatan: 1957, 1459342a Iaodjvzxnwspfx Am Rju

Kondisi: bekas, Tahun pembuatan: 2018, Nominal pressing force: 4,000 kN Ram stroke, adjustable in steps: 30 ... 160 mm Ram adjustment: 180 mm Throat depth: 515 mm Stroke rate at idle: 45 / min Option: Infinitely variable stroke rate: 10 … 60 / min Die installation height at maximum stroke (ram down, adjustment up): 660 mm Table clamping surface (W x D): 1,700 x 1,000 mm Table height above floor: 1,005 mm Ram clamping surface (W x D): 1,100 x 800 mm Ram bore diameter: 65 mm Main motor power: 45 kW Iaedpfsw Rbxzox Am Rsu Machine height approx.: 4,325 mm Machine weight: 33,000 kg Control system – Press safety control system with redundant design and self-diagnosis, including status and fault display in plain text Infinitely variable stroke rate adjustment between 10…60 strokes/min via ABB frequency inverter Control variant – TFT color touchscreen including electronic cam controller with die control and die protection, with color touchscreen for visualization, SIEMENS PLC S/-300, die data management, counting systems, data transmission via Profibus Fully automatic stroke / ram adjustment Permanently welded tie rods, clearance between tie rods: 1,345 mm Swiveling main operator console Contactless safety device – BWS brand LUMIFLEX on the front of the machine table and tool area, each mounted on the tie rods

Kondisi: bekas, Pressing force: 35 t Outreach: 220 mm Stroke: 10 - 120 mm Stroke rate: 120 strokes/min Ram adjustment: 50 mm Table area: 590 x 440 mm Ram area: 460 x 160 mm Total power requirement: 2.2 kW Iaodoykb Dqepfx Am Rou Machine weight approx. 2.5 t Space required approx. W 0.88 x D 1.2 x H 1.95 m Equipment: - Hydraulic clutch - Adjustable table - Base frame, height 28 cm The following work is carried out in-house: - Complete disassembly of the press, cleaning, and technical inspection - Shaft removal, crack testing, new seals and V-belts - New paint finish: Light Grey RAL 7035 / Gentian Blue RAL 5010 - BEKA lubrication unit + new lubrication lines - New front hood - New control cabinet with ABB safety control and touch display Control via touchscreen mounted on the front of the control cabinet, Cabinet positioning (cable length) as agreed with the end customer, Standard 0.8–1.0 m beside the machine, incl. new wiring of the press - Foot switch - Two-hand control - Current safety inspection (UVV) with brake time measurement After the modernization is completed, the machine is approved for manual loading operations with open tools.

Kondisi: baik (bekas), Tahun pembuatan: 1989, Fungsionalitas: berfungsi sepenuhnya, gaya penekanan: 250 t, lebar meja: 1.120 mm, panjang meja: 800 mm, panjang total: 25.800 mm, lebar total: 13.500 mm, tinggi total: 29.750 mm, berat keseluruhan: 12.800 kg, jenis penyesuaian ketinggian: mekanis, penyesuaian langkah: 140 mm, Perlengkapan: dokumentasi / manual, Press Eksentrik LE 250C. Tahun produksi: 1989 (ZTS - SLOVAKIA). Panel kontrol baru sesuai dengan skema asli, pompa pelumasan sentral. Tekanan maksimum: 250 ton. Langkah: 30-140 mm. Jumlah pukulan maksimum per menit: 45. Penyesuaian slider: 110 mm. Jarak maksimum slider ke meja: 450 mm. Iaodpfx Aotq Eqxjm Rsu Ukuran area pemasangan slider: 800 x 475 mm. Ukuran area pemasangan meja: 1120 x 800 mm. Daya motor: 20 kW. Dimensi (Tinggi x Lebar x Panjang): 2975 x 1350 x 2580 mm. Berat: 12.800 kg.

Kondisi: sangat baik (bekas), Tahun pembuatan: 1982, LEN 25C Eccentric Press Year of manufacture: 1982 (SMERAL TRNAVA, Czech Republic) Technical specifications: - Pressing force: 25 tons - Stroke rate (automatic mode): 76/155 strokes per minute - Stroke rate (manual mode): 45/60 strokes per minute - Slide stroke adjustment: 8–85 mm - Slide stroke: 55 mm - Table dimensions: 560 x 450 mm - Slide dimensions: 355 x 225 mm - Clearance between uprights: 250 mm - Number of speeds: 2 - Motor power: 2.2 / 3 kW Ijdpok Nltlefx Am Rsau - Overall dimensions (L x W x H): 1135 x 1365 x 2145 mm - Weight: 2,500 kg

Kondisi: baik (bekas), Tahun pembuatan: 1981, Fungsionalitas: berfungsi sepenuhnya, daya: 4 kW (5,44 hp), gaya penekanan: 40 t, lebar meja: 660 mm, panjang meja: 530 mm, panjang total: 15.850 mm, lebar total: 12.450 mm, tinggi total: 23.700 mm, berat keseluruhan: 4.500 kg, penyesuaian silinder hidrolik: 80 mm, penyesuaian langkah: 95 mm, Eccentric Press LEN 40C. Year of manufacture: 1981 (SMERAL TRNAVA, Czech Republic). Technical specifications: - Pressing force: 40 tons - Number of strokes in automatic mode: 70/142 per min - Number of strokes in manual mode: 50 per min - Ram stroke adjustment: 8–95 mm - Ram stroke: 80 mm - Table surface: 660 x 530 mm - Ram surface: 400 x 250 mm - Throat depth: 265 mm Isdpfxjtzwt Uo Am Rsau - Motor power: 3 / 4 kW - Machine dimensions: 1585 x 1245 x 2370 mm - Weight: 4500 kg Technical condition of the machine: good. Machine inspection and operation check possible on site.

Kondisi: bekas, Tahun pembuatan: 1980, Detail teknis: Tekanan: sekitar 100 t Jarak antar tiang: 500 mm Lengan keluar ke tengah ram: 350 mm Tinggi pemasangan: 450+100 mm Langkah ram - min.: 26 mm Langkah ram - maks.: 152 mm Penyetelan ram: memungkinkan/possible mm Permukaan ram: 550 x 400 mm Meja pemasangan: 1020 x 710 mm Kebutuhan daya total: 10 kW Berat mesin kira-kira: sekitar 7 t Kebutuhan ruang kira-kira: P:2,0 x L:1,7 x T:3,2 m - tanpa bantalan penarik Press dapat didemonstrasikan. Iodpfx Amou Nfhdj Roau

Kondisi: bekas, Tahun pembuatan: 1981, Technical details: Pressing force: 250 t Ram stroke: 36...126 mm Throat depth: 400 mm Isdpfx Amju Nfkle Rsau Ram adjustment: 110 mm Ram surface area: 630 x 500 x 100 mm Installation height: 400 mm Table size: 1000 x 750 x 100 mm Table height above floor: 1000 mm Total power requirement: 23.0 kW Approx. machine weight: 13.5 t Control cabinet dimensions (LxWxH): 1.1 x 0.7 x 1.3 m Approx. machine dimensions (LxWxH): 3.0 x 1.3 x 3.3 m Additional features: - Operation via two-hand control stand with foot pedal - 4 base plates Ø 220 mm

Kondisi: bekas, Technical details: Press force: 250 t Stroke: Continuous idle stroke 40 mm Ram stroke: adjustable 36 – 126 mm Ram adjustment: 110 mm Ram clamping area: 630 x 500 mm (LxW) Bolster area: 1000 x 750 x 100 mm Distance table/ram: 400–526 mm Pass-through opening in table: 400 x 360 mm Operating pressure: 0.6 MPa Ejector stroke: 63 mm Throat depth: 400 mm Total power requirement: approx. 20.0 kW Dimensions control cabinet (LxWxH): 1.2 x 0.65 x 2.1 m Machine dimensions approx. (LxWxH): 2.9 x 1.2 x 3.4 m - Two-hand operation - Operator panel Accessories: Iajdju N Ddwopfx Am Reu - Base plate 2200 x 1500 x 40 mm

Kondisi: bekas, Detail teknis: Tekanan: 160 t Langkah ram: 32...140 mm Jumlah langkah: 50 langkah/menit Jarak jangkauan: 400 mm Ketinggian pemasangan: 400 mm Penyesuaian slider ram: 100 mm Ukuran meja: 1000x750 atau pelat penjepit mm Luas ram: 850x630 mm Lubang pin: 400x360 mm Total kebutuhan daya: 15,5 kW Berat mesin kira-kira: sekitar 10,5 t Dimensi P-L-T: Lemari listrik 1,06x0,6x2,0 m Dimensi P x L x T: P:2,9 x L:1,25 x T:3,3 m - Mode single dan/atau stroke kontinu tersedia - 2 pelat penjepit (1200x760x90 mm dan 1200x760x70 mm, lubang pin Ø=300 mm) - Pengoperasian dengan kaki dan tangan tersedia - Pemeriksaan terakhir dilakukan tahun 2006 - 80A; udara tekan 6kp/cm²; kapasitas oli sekitar 30 liter Iajdpfxju N Dfhs Am Rou termasuk.

Kondisi: bekas, en_1 Iajdpfx Aevt Nvpsm Rou

Kondisi: bekas, Tahun pembuatan: 1983, Technical details: - Pressure: 100 t - Stroke: 20 mm fixed - Strokes per minute: 55 spm - Throat depth: 355 mm Iodpfx Aou Nfizjm Rsau - Ram bore: Ø 36 mm - Table surface: 900x640 mm - Ram adjustment: 150 mm - Ram clamping surface: 500x415 mm - Height above floor: 800 mm - Maximum distance between table and ram: 390 mm - Table through-hole: Ø 330 mm - Total power requirement: 11 kW - Machine weight approx.: 7.5 t - Machine dimensions approx. LxWxH: 1.46x1.58x2.57 m - Transport dimensions LxWxH: 1.9x1.6x3.1 m The press is supplied without machine control cabinet (optional installation possible). Complete electric individual drive for 3x 380 Volt, 50 Hz Belt and ram guards Friction clutch and brake unit PRESSMATIC

Kondisi: bekas, Tahun pembuatan: 1969, en-GB:Technical details: Pressing force: 40 t Throat depth: 220 mm Stroke: 10 – 120 mm Ram adjustment: 63 mm Strokes per minute: 160 spm Distance table/ram: 300 mm Table size (LxW): 440 x 620 mm Passage hole in table: Ø 200 mm Ram clamping surface: 400 x 250 mm Machine weight approx.: 2.52 t Machine dimensions approx. (LxWxH): 1.5 x 1.2 x 1.3 m A clamping plate (LxW: 440 x 620 mm) with a centre bore Ø 100 mm is mounted on the table. Iaodpfx Aju Nfkxjm Rsu A steel plate 380 x 325 x 27 mm is mounted on the ram. The press is equipped with two-hand operation. fr-FR:Détails techniques : Pression : 40 t Profondeur de col de cygne : 220 mm Course : 10 - 120 mm Réglage du coulisseau : 63 mm Nombre de courses : 160 coups/min Distance table/coulisseau : 300 mm Dimensions de la table (Lxl) : 440 x 620 mm Ouverture traversante dans la table : Ø 200 mm Surface de bridage du coulisseau : 400 x 250 mm Poids de la machine env. : 2,52 t Dimensions de la machine (LxlxH) env. : 1,5 x 1,2 x 1,3 m Une plaque de bridage (Lxl : 440 x 620 mm) avec un alésage central Ø 100 mm est montée sur la table. Une plaque en acier de 380 x 325 x 27 mm est montée sur le coulisseau. La presse est équipée d'une commande bimanuelle. es-ES:Detalles técnicos: Presión: 40 t Cuello de cisne: 220 mm Carrera: 10 - 120 mm Ajuste del émbolo: 63 mm Carreras por minuto: 160 cpm Distancia mesa/émbolo: 300 mm Tamaño de la mesa (LxA): 440 x 620 mm Agujero pasante en la mesa: Ø 200 mm Superficie de sujeción del émbolo: 400 x 250 mm Peso de la máquina aprox.: 2,52 t Dimensiones de la máquina aprox. (LxAxH): 1,5 x 1,2 x 1,3 m En la mesa hay una placa de sujeción (LxA: 440 x 620 mm) con agujero central de Ø 100 mm. En el émbolo está montada una placa de acero de 380 x 325 x 27 mm. La prensa cuenta con control bimanual.

Kondisi: bekas, Tahun pembuatan: 1980, Technical details: Pressing force: 400 t Stroke: 40 - 140 mm Continuous strokes/min: 32 Throat depth: 400 mm Installation height min/max: 450/590 mm Ram adjustment: 125 mm Table size: 1250 x 750 mm Height above floor: 1130 mm Iajdpsu N A Uuefx Am Rsu Total power requirement: approx. 31.5 kW Machine weight approx.: 23.0 t Machine dimensions (LxWxH): 3.7 x 1.7 x 3.9 m Control cabinet dimensions (LxWxH): 1.0 x 0.7 x 2.1 m Additional features: - Clamping plate (LxWxH): 1260 x 760 x 100 mm - With drawing device, force 250 kN, stroke approx. 83 mm - Operation via control panel - No UVV (accident prevention regulations) - As is