Beli Yasda Mesin Bor Jig Cnc / Pusat Permesinan bekas (79.945)

Tahun pembuatan: 2012, Kondisi: sangat baik (bekas), YASDA YBM Vi40 CNC Jig Boring Machine / Machining Center Machine in immaculate condition including accessories (see photos) For the complete set of photos: see attached PDF file (from page 4) TECHNICAL DATA Travel distances X-axis: 900 mm Y-axis: 500 mm Z-axis: 450 mm Distance from table surface to spindle nose: 100 to 550 mm Rotary Table Diameter: 400 mm Pallet load capacity: 200 kg Table surface configuration: 44-M12 threads C-axis: 360° Swivel axis (B-axis) range: ±110° Distance between pivot axis center and rotary table: 0 mm Rotary axis (C-axis): 100 rpm Max. swivel axis rotation: 20 rpm Rotary axis drive motor: 4.2 kW Swivel axis drive motor: 4.5 kW Spindle Type: SA40-24,000-18.5 Spindle speed range: 100 – 24,000 rpm Programming of spindle speed range: Programming by direct five-digit S-command input Number of spindle speed ranges: 1 Spindle taper type: HSK-63A Inner spindle bearing diameter: 65 mm Bedopqx H Topfx Afpedg Rapid Traverse Speed: X, Y, Z-axis: 20,000 mm/min Feed: X, Y, Z-axis: Max. 5,000 mm/min C-axis: 100 rpm B-axis: 20 rpm Minimum input increment: 0.0001 mm/deg Automatic Tool Changer: 60 tools Tool selection method: Random access Tool holder type: HSK-63A Max. tool diameter: 100 mm Max. tool diameter (full setup): 70 mm Max. tool length: 250 mm Max. tool weight: 7 kg Tool balance level: Within G2.5 Machine dimensions: 3,220 x 3,885 x 3,515 mm Machine weight: 15,000 kg No liability is assumed for the correctness, completeness, or currency of the information provided.

Kondisi: bekas, 4-axis CNC drilling and milling machine IXION type 30 CNC W VMC, machining center Year of manufacture: approx. 1997, machine overhauled in 2020 Travel distances X: 600 mm Y: 350 mm Z: 600 mm Bdjdpou Tln Nsfx Afpog Table size: 800 x 400 mm T-slot spacing: 75 mm Table load capacity: 300 kg Spindle taper: SK 40 (retention knob DIN 69872 A) Spindle speed: 20-5000 rpm Spindle torque: max. 150 Nm Distance spindle nose to table: max. 660 mm Feed rate X, Y and Z: 0 - 5000 mm/min, stepless Rapid traverse X, Y and Z: 15000 mm/min Tool change time: approx. 5 sec Chip-to-chip time: approx. 7.5 sec Milling capacity in St 60: 150 ccm/min Drilling capacity in St 60: 35 mm Tapping capacity in St 60: M24 Spindle drive power: 5 kW (10 kW at 25% duty cycle) Power supply: 400 Volt, 50 Hz - CNC control Heidenhain TNC 415 with 12" TFT display - Electronic handwheel - RS 232 interface - 12-position automatic tool changer - Hydro-mechanical tool clamping - Rotary axis as dividing head on the table = 4th axis, MECATECNICA type DCN 250-8, 3-jaw chuck Ø 200 mm Speed approx. 25 rpm, gear ratio 1:180 - Cabin lighting via 2x halogen spotlights - Chip conveyor with coolant pump - Control cabinet fixed to the machine Transport dimensions: Length 320 cm x Width 230 cm x Height 300 cm Machine footprint with chip conveyor (L x W x H): 3200 x 3100 x 3000 mm Machine weight: 3,100 kg Chip conveyor weight: approx. 200 kg Good condition.

Kondisi: hampir baru (bekas), CNC-Vertikal-Bohrwerk WMW MIKROMAT Verfahrweg X: 1.120 mm Verfahrweg Y: 710 mm Spindelhub Z: 315 mm Bsdpfozmxy Tjx Afpsdg Verfahrweg W: 630 mm Numerische Steuerung: CNC NUM 1060 Spindel: Ø 125 mm Aufnahme: SA40 Drehzahlbereich: 36 bis 2.240 U/min Tischgröße: 1.400 x 900 mm Abstand zwischen den Ständern: 1.080 mm Max. Abstand Spindelstirn/Tisch: 0 bis max. 900 mm Max. zulässige Tischbelastung: 1.000 kg Getrenntes Schaltschrank Maschine 2000 mit CN NUM 1060 modernisiert Spannung: 380 V Abmessungen (L x B x H): 4.000 x 2.460 x 3.030 mm Gewicht: ca. 9 t

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2016, jam operasional: 152 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 665182, jarak pergerakan sumbu X: 650 mm, jarak lintasan sumbu Y: 550 mm, jarak gerak sumbu Z: 500 mm, kecepatan spindel (maks.): 42.000 rpm, jumlah slot dalam magazin alat: 40, Tidak ada harga minimum – penjualan dijamin dengan penawaran tertinggi! RINCIAN TEKNIS Jarak Pergerakan Jarak pergerakan sumbu X: 650 mm Jarak pergerakan sumbu Y: 550 mm Jarak pergerakan sumbu Z: 500 mm Kecepatan Pemakanan Kecepatan pemakanan sumbu X: 30 m/menit Kecepatan pemakanan sumbu Y: 30 m/menit Kecepatan pemakanan sumbu Z: 30 m/menit Spindel Jenis dudukan spindel: HSK-E 40 Kecepatan spindel: 42.000 RPM Waktu operasi spindel: 151 jam 20 menit 08 detik Penggantian spindel: 2025 Biaya penggantian spindel: sekitar 40.000 EUR Majalah Alat Jumlah posisi alat: 40 Sistem Palet Dimensi palet: sekitar 320 × 320 mm Penyangga palet: Meja putar RINCIAN MESIN Jenis mesin: Pusat pemesinan CNC Produsen: OPS INGERSOLL Model: SPEED HAWK 650 Tahun pembuatan: 2016 Data Sambungan Listrik Tegangan jaringan: 400 V Frekuensi jaringan: 50 Hz Tegangan kontrol: 24 V DC Perlindungan maksimum: 63 A Daya sambungan: 38 kVA Dimensi dan Berat Tinggi keseluruhan: 2.850 mm Panjang keseluruhan: 3.300 mm Lebar keseluruhan: 2.400 mm Berat mesin: 9.000 kg PERLENGKAPAN Bsdpfx Afezquqcepjdg Dokumentasi teknis Buku panduan Dudukan alat HSK-E 40 3 palet

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2004, jam operasional: 11.298 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 665001, jarak pergerakan sumbu X: 700 mm, jarak lintasan sumbu Y: 550 mm, jarak gerak sumbu Z: 450 mm, berat benda kerja (maks.): 2.000 kg, kecepatan spindel (maks.): 42.000 rpm, jumlah slot dalam magazin alat: 40, Tidak ada harga minimum – penjualan dijamin dengan penawaran tertinggi! Penawaran mengikat untuk pengambilan tepat waktu antara tanggal 21 September dan 1 Oktober! RINCIAN TEKNIS Jarak perjalanan sumbu X: 700 mm Jarak perjalanan sumbu Y: 550 mm Jarak perjalanan sumbu Z: 450 mm Bdodpjzqupxjfx Afpog Sumbu Umpan Kecepatan perjalanan maksimum sumbu X, Y, dan Z: 30 m/menit Percepatan maksimum sumbu X, Y, dan Z: 15 m/s² Akurasi pemosisian TP sesuai DIN ISO 230-2: 0,005 mm Akurasi pengulangan: 0,002 mm Meja Kerja Panjang meja: 850 mm Lebar meja: 700 mm Jumlah alur-T: 5 Dimensi alur-T: 18 H12 Kapasitas beban meja: 2.000 kg Berat benda kerja maksimum: 2.000 kg Jarak antara dudukan spindel – meja: 550 mm Spindel Dudukan spindel: HSK-E 40 Kecepatan spindel: 3.000 – 42.000 putaran/menit Daya spindel: 17 kW Pengubah Alat Jumlah tempat magasin alat: 40 RINCIAN MESIN Jenis mesin: Pusat pemesinan CNC-HSC Pengontrol CNC: Andronic Data Koneksi Listrik Tegangan listrik: 400 V Frekuensi listrik: 50 Hz Sekering: 32 A (?) Dimensi dan Berat Panjang keseluruhan: 3.300 mm Lebar keseluruhan: 2.300 mm Tinggi keseluruhan: 2.300 mm Berat keseluruhan: 7.700 kg Data Operasi Waktu pengoperasian mesin: 275 hari 5 jam 13 menit 39 detik Waktu pengoperasian spindel: 11.297 jam 20 menit 11 detik PERALATAN - Penutup lengkap - Panduan tahan debu dan cairan - Sistem ekstraksi kabut oli - Pendingin kompresor - Pengubah frekuensi - Skala kaca Heidenhain pada sumbu X, Y, dan Z - Lampu kerja di dalam ruang - Dokumentasi teknis - Bangku kerja - Dudukan alat HSK-E-40 - Alat - Dimensi bangku kerja: sekitar 1.500 × 900 × 1.100 mm Referensi Eksternal: Demo – Lot 2

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2009, jam operasional: 4.247 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 655118, jarak pergerakan sumbu X: 550 mm, jarak lintasan sumbu Y: 400 mm, jarak gerak sumbu Z: 400 mm, kecepatan spindel (maks.): 42.000 rpm, sudut putar sumbu A (min.): -120 °, sudut putar sumbu A (maks.): 60 °, Tidak ada harga minimum – penjualan dijamin dengan harga penawaran tertinggi! Penawaran mengikat untuk pengambilan barang tepat waktu antara tanggal 21 September dan 1 Oktober! RINCIAN TEKNIS Jangkauan pergerakan sumbu X: 550 mm Jangkauan pergerakan sumbu Y: 400 mm Jangkauan pergerakan sumbu Z: 400 mm Sudut putar sumbu A: −120° hingga +60° Sudut putar sumbu C: n × 360° Jarak dari dudukan HSK-E ke meja: 450 mm Luas permukaan penjepit: 650 × 800 mm Dimensi palet untuk sumbu ke-4 dan ke-5: sekitar 300 × 300 mm Spindel Dudukan spindel: HSK-E 40 Kecepatan spindel: 0 hingga 42.000 RPM Daya spindel S1: 15 kW Daya spindel S6: 17 kW Sumbu dan Akurasi Jenis penggerak: Motor servo AC digital, disesuaikan sepenuhnya Kecepatan pergerakan: maks. 30 m/menit Percepatan: maks. 15 m/s² Akurasi pengulangan: 0,002 mm Tampilan digital: 0,001 mm atau 0,0001 mm, dapat dipilih Kecepatan nominal dalam pengoperasian sumbu NC (sumbu A): 40 min⁻¹ Kecepatan nominal dalam pengoperasian sumbu NC (sumbu C): 40 min⁻¹ Bdjdjzquprepfx Afpjg Pengubah alat Jenis: Majalah piringan pengambilan Jumlah tempat di majalah: 32 RINCIAN MESIN Waktu operasi mesin: 484 hari 11 jam 24 menit 06 detik Waktu operasi spindel: 4.246 jam 55 menit 36 detik Jenis: Pusat pemesinan CNC 5-sumbu Daya sambungan: 38 kVA Tegangan masukan: 400 V AC, 3 fase, 50 Hz Tegangan kontrol: 24 V DC Perlindungan: maks. 63 A Panjang keseluruhan: 3.300 mm Lebar keseluruhan: 2.200 mm Tinggi keseluruhan: 2.300 mm Berat mesin: 7.400 kg PERALATAN - Dokumentasi teknis dan buku panduan - Tiga palet cadangan - Dudukan alat HSK-E-40 - Palet dengan perlengkapan khusus yang terpasang Referensi eksternal: Demo – Lot 1

Kondisi: baik (bekas), Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 901, jarak pergerakan sumbu X: 370 mm, jarak lintasan sumbu Y: 470 mm, jarak gerak sumbu Z: 405 mm, kecepatan spindel (maks.): 2.000 rpm, kecepatan spindel (min.): 75 rpm, panjang meja: 500 mm, lebar meja: 380 mm, penjepit spindle: MK 2, tinggi total: 2.000 mm, panjang total: 1.590 mm, lebar total: 1.290 mm, gores kuas bulu: 155 mm, Mesin jig boring, mesin boring presisi, mesin boring pelat, mesin boring meja, mesin boring. -Mesin Jig Boring: termasuk lemari perkakas dengan berbagai alat -Ukuran meja: 380 x 500 mm -Perjalanan: Z 405 mm / Y 470 mm / X 370 mm Bdedszrmf Ispfx Afpeg -Stroke spindle: 155 mm -Koneksi: MK2 (plus konus luar untuk alat spindle) -Kecepatan: 75 - 2000 rpm -Dimensi mesin: 1590/1290/H2000 mm -Berat mesin: 1774 kg -Dimensi lemari: 720/460/H1000 mm -Berat lemari: 158 kg Harga bisa dinegosiasikan Meja putar yang terlihat di salah satu gambar tidak termasuk Pengiriman ke seluruh dunia dapat diatur dengan biaya tambahan

Kondisi: baik (bekas), Tahun pembuatan: 2004, 10520 Bdodpezx Nxwefx Afpog

Kondisi: bekas, Tahun pembuatan: 2011, Base machine M800 X5 TV 1 WORKING FIELD X: 5,020mm Y: 1,830 mm Z: 675 mm Clearance height: 300 mm (from 50 mm pod height) MACHINE STRUCTURE The base structure is a monolithic design made of thick-walled steel. It is reinforced over the entire machine bed with welded-in parts, providing exceptional stability. The table design, featuring a large base, is the key to ensuring lasting precision and stability. The machine layout allows the operator to achieve optimal workflow despite minimal space requirements. The mobile gantry is built from a solid monoblock. It is positioned in the X direction on prismatic, ground guides using ball recirculation carriages. Mounted on this mobile unit carrier, the working unit is also installed on prismatic, ground guides and ball recirculation carriages. Bdodpfx Afjxy Tmnopog AXIS MOVEMENT All axis movements are performed on large cross-section prism linear guides with ball recirculation shoes offering extensive contact area, ensuring optimal sliding even at the highest speeds and accelerations. Precise and swift positioning of the moving gantry (X-axis) is achieved via helical rack and pinion drive. Large cross-section ball screws guarantee accurate positioning of the working unit along the mobile gantry (Y- and Z-axes). Perfect mechanical dynamics and maximum positioning accuracy are governed by premium quality drives and brushless motors. Maximum axis speeds: - X-axis = 90 m/min - Y-axis = 90 m/min - Z-axis = 30 m/min SAFETY DEVICE WITH BUMPER AND LIGHT CURTAIN 1 Bumpers with sensors are fitted around the mobile stand, and a light curtain system is installed in front of the machine. If the operator enters the active zone, the axis speed of the X-axis is reduced to a lower rate of 25 m/min without stopping the machine. This system allows workpieces to be loaded during pendulum operation without the disadvantageous access restrictions associated with safety mat systems. This prevents undesired interruptions of the machining cycle and allows greater freedom of movement around the work table. CE Certificate for the safety system 1 Safety enclosure 1 Safety enclosure lateral and rear Automatic centralized lubrication controlled via CNC 1 Lubrication of X, Y, and Z axes governed at regular intervals by CNC control, eliminating manual intervention at the machine. Central extraction nozzle 1 All individual extraction ports of the machining units are merged into one central port. Inside the port, various slide valves are controlled by the NC system, reducing the required extraction air volume. Chip conveyor 1 Maxi – 5 axis electrospindle 11 kW HSK-63 “Prisma K” 1 5-axis electrospindle with 11 kW power at 20,000 rpm in S1 (100% duty cycle) Speed: max. 20,000 rpm Rotation direction: left / right Liquid cooling Tool interface: HSK-63F 18 kW inverter for stepless, uniform power delivery Max. rotation B-axis = 200° (+/-100°) C-axis = 650° Thanks to non-orthogonal axes, complex horizontal positioning can be performed in compact working spaces. This allows machining of complex geometries without the risk of collision.

Kondisi: bekas, Tahun pembuatan: 2016, Bidang kerja: X=3300 mm Y=1280 mm Z=150 mm Tinggi celah. Terminal operasi: layar warna LED 24". Terminal genggam untuk pengaturan kecepatan sumbu. Perangkat lunak: "Woodflash". Pompa vakum 90 m³/jam/50 Hz atau 108 m³/jam/60 Hz. Spindel milling 12 kW HSK F63 (12.000 rpm). Penukar alat linear 12 posisi di kiri rangka mesin + posisi pickup. Kepala bor DH 16 4H 2S: 12 spindel vertikal, 4 spindel horizontal, 2 pisau alur. Lokasi gudang: Nattheim. Bjdpfsxy Tlwsx Afpedg

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2025, CMS Gea Horizontal Glass Processing Center Axis Travels: X-axis: 3,800 mm Y-axis: 2,550 mm Z-axis: 420 mm C-axis: 360° Included Features: - Electrospindle 13.5 kW, 0-15,000 rpm - Workpiece and tool measurement - 3x quick-change magazine with a total of 21 magazine positions Bdjdjp Auvaspfx Afpsg - Tool magazine with 24 tool positions - Rear drilling unit - CAD/CAM - Central lubrication

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2026, CMS Ypsos Vertical Glass Processing Center Bdodpfx Afopygraopjg Processing dimensions: Max. glass length: 3,200 / 4,500 / 6,000 mm Max. glass height: 2,200 / 2,800 / 3,300 mm Min. glass length: 420 mm Min. glass height: 270 mm Glass thickness: 3–30 mm Included equipment: - 2x suction units, each with 3 vacuum suction cups - Electrospindle 3.7 kW, 0–12,000 rpm - Workpiece measurement and tool measurement - Revolver tool magazine 9 + 9 - Back drilling unit - CAD/CAM - Centralized lubrication

Kondisi: sangat baik (bekas), Tahun pembuatan: 2002, Pusat Pemrosesan CNC DECKEL MAHO DMU 80 T Tahun pembuatan: 2002 Kontrol: Heidenhain iTNC 530 Spindel: diganti pada 14.11.2018 sekitar 17.000 jam Data teknis: Perjalanan sumbu: X: 880 mm Y: 630 mm Z: 630 mm Sumbu B yang dikontrol di kepala milling: -15° hingga 90° Kecepatan putar spindel: 12.000 rpm Jumlah penukar alat: 32 posisi Bdsdpfx Ajylk Syofpjg Dudukan alat: SK 40 Sistem pendingin: tersedia

Kondisi: baik (bekas), Tahun pembuatan: 2006, Teile, die mit der Hand gezeigt werden, sind nicht im Lieferumfang enthalten. Bdodpfozyakmsx Afpeg

Kondisi: baik (bekas), Tahun pembuatan: 2006, Fungsionalitas: berfungsi sepenuhnya, Detail Teknis Diameter spindel 125 mm Jarak sumbu X 3000 mm Bjdpfxezx Rxlo Afpjdg Jarak sumbu Y 2000 mm Jarak sumbu Z 1500 mm Sumbu W (spindel secara memanjang) 600 mm Ukuran meja 1250 x 1600 mm Kapasitas beban meja - tengah/maksimal 5000 kg Sistem kontrol Heidenhain iTNC 530 Pemasangan alat ISO 50 Kecepatan putar spindel 5 - 3000 RPM Motor penggerak spindel 37 kW Torsi pada spindel 1646 Nm Jumlah tingkatan roda gigi 2 Total kebutuhan daya kW Berat mesin sekitar 23 ton Ruang yang dibutuhkan sekitar 6830 x 6615 x 7200 mm Informasi tambahan Jam operasional: - Mesin menyala: 59.078 jam - Program otomatis: 24.207 jam * Sistem kontrol CNC HEIDENHAIN iTNC 530 * Sistem pendingin * Rotasi meja pada sumbu B 360.000 posisi

Kondisi: sangat baik (bekas), PUSAT PEMESINAN CNC 3 SUMBU (X-Y-Z) – Model dengan Konstruksi Lengan Pelat Horizontal yang Dapat Bergerak (Benda Kerja), Kepala Kerja Statis Pengontrol (Perangkat Lunak BiesseWorks), Dilengkapi dengan Panel Kontrol dan Listrik Terpisah Kabinet Pengaman untuk Kepala Kerja, Alas Anti Selip Meja Penopang (untuk Menopang Benda Kerja) di Bagian Masuk No. 2 Penjepit Benda Kerja untuk Memasukkan ke Area Kerja Meja Keluar (dengan sabuk konveyor) Dimensi Minimum Benda Kerja (X-Y-Z) mm 90 x 70 x 8 (kira-kira) Dimensi Maksimum Benda Kerja (X-Y-Z) mm 3000 x 1300 x 60 (kira-kira) Total Daya yang Dibutuhkan (Kw) 24 Pemesinan Simultan Dua Pelat pada Sumbu Z Sistem Otomatis untuk Mendeteksi Dimensi Pelat (pada Sumbu X dan Y) GRUP KERJA (ATAS) (BH41): Spindel Bor Vertikal Independen No. 31 Spindel Bor Horizontal Independen No. 10 (8 X + 2 Y) Unit Gergaji Nut (untuk Pemesinan pada Sumbu X) Diameter mm 160 (No. 1 x kw 5) Spindel Utama Vertikal (Unit Pemotong) ISO 30 (No. 1 x kw 6,5) Spindel Pemotong Horizontal (No. 1) pada Arah Y Bdsdpfxszyalkj Afpsg GRUP KERJA (BAWAH) (BH41): Spindel Bor Vertikal Independen No. 31 Spindel Bor Horizontal Independen No. 10 (8 X + 2 Y) Unit Gergaji Nut (untuk Pemesinan pada Sumbu X) diameter mm 160 (No. 1 x kw 5) Spindel Utama Vertikal (Unit Pemotong) ISO 30 (No. 1 x kw 6,5) Spindel Pemotong Horizontal (No. 1) pada Arah Y

Kondisi: sangat baik (bekas), PUSAT PEMESINAN CNC 3 SUMBU (X-Y-Z) Meja yang dapat bergerak (benda kerja), kepala pemesinan yang dapat bergerak Meja vertikal (benda kerja) Pengontrol MAESTRO konsol "eye-M PRO" Perangkat lunak "3D PROBE" untuk pemeriksaan otomatis dimensi meja Kabinet pengaman kepala pemesinan 2 buah rahang untuk memasang meja Dimensi benda kerja minimum (X-Y-Z) mm 200 x 50 x 8 Dimensi benda kerja maksimum (X-Y-Z) mm 3050 x 1300 x 95 Bjdpfszx Dvdsx Afpedg Total daya terpasang (A) 43 KELOMPOK KERJA: No. 1 Unit pengeboran (5 sisi dengan teknologi Ro.Ax.-Rotasi-Sumbu) F31LTC (daya Kw 3,9) dengan spindel: - No. 21 spindel pengeboran vertikal independen - No. 10 spindel pengeboran horizontal independen (6 di X + 4 di Y) - No. 3 spindel pengeboran independen (untuk engsel) No. 1 Unit gergaji pengarah (untuk pemesinan pada sumbu X) Diameter (mm) 125 No. 1 spindel utama vertikal (unit pemotongan) HKS63 (daya Kw 7,5) Sistem penggantian otomatis alat – jumlah tempat majalah (No. 6 tempat alat)

Kondisi: bekas, nomor mesin/kendaraan: 008608, Area kerja sumbu X: 2500 mm Area kerja sumbu Y: 1300 mm Bdjdozqz N Sopfx Afpjg Daya spindle utama: 6 kW Jumlah sumbu yang dikontrol: 3 sumbu Jumlah spindle bor: 84

Kondisi: bekas, Tahun pembuatan: 2018, en: Startech cn MAIN FEATURES FLEXIBLE AND CUSTOMISABLE PRODUCTION COMBINED WITH SPEED AND PRECISION DRILLING FROM ABOVE WITH REFERENCE TO THE TOP SIDE OF THE PANEL ALLOWS FOR ABSOLUTELY PRECISE MACHINING NUMERICAL CONTROL WITH 7" COLOUR SCREEN: EASY AND INTUITIVE TECHNICAL SPECIFICATIONS Startech CN AXES Max. workpiece dimensions X-Y-Z mm 3050 x 800 x 50 Min. workpiece dimensions X-Y-Z mm 300 x 90 x 10 Working area drilling/grooving mm 0 x 800/0 x 800 X-axis stroke mm 750 Max. traversing speed X-Y axes m/min 25 DRILLING UNIT Vertical spindles Number 7 (4X-4Y, one shared) Horizontal spindles (along Y axis) Number 2 (1+1) Horizontal spindles (along X axis) Number 1 Fixed groove saw (direction) X Groove saw diameter mm 100 Max. groove saw thickness mm 5 Motor power kW (HP) 1.5 (2) Spindle speed rpm 3350 Groove saw speed rpm 4300 INSTALLATION Power supply V (Hz) 380 / 400 (50 / 60) Installed power KVA 4.5 Compressed air requirement bar 6 Air consumption Nl/cycle 90 Extraction requirement m3/h 1200 Extraction air speed m/sec 20 Extraction nozzle diameter mm 120 GENERAL FEATURESUniversal CNC drilling machine with fixed gantry work table and moving workpiece for performing the following operations: - Vertical drilling on the panel surface - Horizontal drilling on all four sides of the workpiece - Grooving with integrated groove saw in "X" direction Self-supporting frame Machine base in steel tube construction to provide a large base for the work table. The structure is positioned on 3 self-levelling feet. The electrical cabinet is integrated into the machine base. Central Bakelite support table "Easy Motion": - an MDF sector for through drilling, automatically swivelling away for horizontal drilling - an infeed roller to facilitate panel feeding - a rear roller track to facilitate panel sliding - left and right stops - a manually adjustable central alignerIt is necessary to use the left and right stops to drill the two opposite panel sides horizontally in the "X" direction. Panel positioning along the X-axis by vacuum suction cups. Unit carriage This is a gantry structure in steel tube construction. The main working unit is installed on the gantry. F10L drilling unit includes: - 7 independent vertical spindles- chuck D10 mm- spindle spacing 32 mm - 2 horizontal drilling heads, 1 in X direction with one drill, 1 double drilling head in Y direction (1 + 1 chuck D10 mm) - speed 3350 rpm- 1 integrated saw unit in X (max. diameter 100 mm) - saw blade speed 4300 rpm- motor power 1.5 kW - vertical pneumatic stroke per spindle 70 mm - horizontal pneumatic stroke of the drilling unit Positioning of the workpiece and drive of the working unit A CNC-controlled vacuum cup clamps the workpiece and positions it sequentially under the working unit during machining. X and Y axis movement on THK linear guides with reinforced toothed belt transmission; Z axis movement is pneumatic on ball-bushing guides with position stop adjustable via the working unit position. Positioning of the work units via state-of-the-art control and drive technology -CONTROL The control system was specially developed for industrial use. Bodpfovwbp Asx Afpsdg

Kondisi: bekas, Tahun pembuatan: 2011, Besar area kerja pada arah X: 2770 mm Besar area kerja pada arah Y: 1220 mm Ketebalan pemrosesan (ukuran Z): 80 mm Konstruksi mesin: mesin portal Daya spindle utama: 11,0 kW Kecepatan spindle utama: 1500 - 24000 rpm Spindle dengan kontrol vektor: Ya Sistem penjepitan: HSK 63 F Pendingin spindle: Pendingin udara Jumlah sumbu: 3 Penukar alat: Ya Tempat alat: 10 unit Keyboard mesin tik: Ya Mouse: Ya Sistem program: Xilog Plus DXF Interface: Ya Koneksi online memungkinkan: Ya CD Rom Drive: Ya Tipe meja: meja grid Sistem pemberhentian: silinder pemberhenti Jumlah pompa vakum: 1 Kapasitas pompa vakum: 250 m³/h Pengaman: alas pijakan keselamatan Lokasi gudang: Sonnefeld Bodpfx Afjvvi Htjpsdg

Kondisi: bekas, Tahun pembuatan: 2004, Lokasi gudang: Nattheim Bjdpevvi Hysfx Afpedg

Kondisi: bekas, Tahun pembuatan: 1994, Lokasi gudang: Nattheim Bodowmm Nropfx Afpodg

Kondisi: bekas, Tahun pembuatan: 2002, Dimensi pemesinan (diameter alat 25mm): X=3015 mm Y=1483 mm Z=325 mm Maks. pergerakan sumbu: X=3268 mm Y=1483 mm Z=325 mm Kecepatan pemrograman maks.: X/Y = 75 m/menit / Z = 30 m/menit Dudukan alat HSK 63F Unit bor 7964, 14 spindle bor vertikal dengan rasio 32 mm (10 di x / 4 di y) Unit gergaji 7946 3,6 kW, dapat diputar pneumatik 90° Unit frais 7933 9 kW kayu dengan sumbu C Magasin alat (piringan, 6 slot) Panel kontrol manual Perangkat laser (untuk posisi cangkir vakum) Panel kontrol PC dengan monitor 17" Sistem operasi Windows 2000 Perangkat lunak: TwinCAM32 – versi kantor Pompa vakum 100 m³/jam, tipe kering, karpet alas keselamatan selektif (pembagian 3 bidang) Bsdpfevvi Nbex Afpsdg Lokasi penyimpanan: Nattheim

Kondisi: bekas, Tahun pembuatan: 2008, · Working area X-Y-Z: 3,660 x 1,550 x 130 mm · Travel length X-Y: 4,200 x 2,000 mm Aggregate and Accessories Description (Basic) The machine base structure is a monolithic design made from thick-walled steel. It is reinforced with welded triangular plates throughout the entire machine bed, providing extreme stability. The use of a triangle shape with a broad base for all load-bearing elements is the key to ensuring long-term precision and stability. The machine layout allows the operator to achieve an optimal workflow with minimal space requirements. This foundation provides a balanced, secure base for the processing unit with excellent load distribution. The mobile portal-type aggregate carrier is constructed as a solid monoblock. It is positioned in the X-axis along ground prismatic guides via recirculating ball carriages. The working aggregate is mounted to this portal carrier on ground prismatic guides and recirculating ball carriages. Axis Movement: Y and Z axes are driven by precision-ground recirculating ball screws of the highest accuracy class. The X-axis drive is a backlash-free, preloaded precision rack-and-pinion system. This ensures even load distribution during positioning, which is crucial for balanced movements even in complex operations. Axis movements are realized by brushless AC servo motors. These provide outstanding positioning speeds with very short ramp times. Additionally, all motors feature fully integrated measurement systems, making this drivetrain entirely maintenance-free. · Rapid traverse in X: 40 m/min · Rapid traverse in Y: 60 m/min · Rapid traverse in Z: 22.5 m/min Vacuum System (Basic) · Vacuum pump: 100 cbm/h · Power: 2.5 kW · Max. vacuum (connection): 0.9 bar Control / Electrical Cabinet · Office PC or industrial PC (see options) · Basic NC control: ESA-GV KVARA 6.0 · Cable remote control with main functions ELECTRICAL/ELECTRONIC CNC CONTROL Universal is equipped with a powerful NC control system. The integrated office PC provides an unmatched level of familiarity to the NC system: the software operates on Windows XP, allowing fast and simple programming—even for inexperienced users. The system is open and allows connections to a CD-ROM drive, audio card, barcode reader, modem, printer, scanner systems, etc. Installation of any network systems or commercially available CAD programs is also possible. To save space, the electrical cabinet is mounted beneath the machine table, while the operator uses a separately mobile, wheeled console that can be freely positioned. PROGRAMMING SYSTEM XILOG Software features: - Import of DXF files - Import of ASCII files - Operator interface available in native language (I - GB - F - D - E) - Linear and circular interpolation in three axes, linear in space, helical on selected plane - Assisted programming - Calculator for direct transfer of computed data - Graphical and syntax aids for drilling and milling operations - Parametric programming for repeating panel machining on different p Bdjdovvi Nzjpfx Afpsg

Kondisi: bekas, Tahun pembuatan: 2020, CNC-CONTROLLED MACHINING CENTER WITH MULTIFUNCTION TABLE - WORK CELL VERSION X400 CELL Drilling and Milling Made for You! The numerically controlled machining center comes equipped with a comprehensive range of accessories and tooling for milling and drilling, designed to meet any requirement in the processing of wood and similar materials. - High-performance: Equipped with drilling spindles capable of 8,000 rpm and industry-leading spindle technology, it features the most robust spindle currently available on the market, offering over 1,000 hours of maintenance-free operation. - Superior and more comprehensively equipped: Multiple configuration options via the multifunction table ensure the machine can be optimally adapted to any operational requirement. - Easier and more intuitive programming thanks to the integrated MAESTRO CNC CAD-CAM module. - User-friendly: The worktable is accessible at all times, the control cabinet and vacuum pump are integrated, and in the PRO SPACE configuration, there are no protective barriers. Bjdevvi N Iepfx Afpedg Load-Bearing Structure The supporting structure consists of an exceptionally robust monolithic steel base, heavily ribbed and highly rigid; the particularly wide support surface was specially designed to give the machine stability and to maintain ongoing precision under all working conditions, with no need for anchoring to the floor. The base provides a large, solid platform for the moving gantry: the work unit thus benefits from a balanced, stable, and resilient support capable of withstanding heavy use, resulting in higher quality performance and increased accuracy. The moving gantry itself is a sturdy single piece anchored on both sides of the base and runs on top-grade prismatic linear guides with recirculating ball shoes. The dual drive system on the X-axis delivers peak performance even under heavy-duty conditions. The movement of the lower mobile unit (X-axis) and the working unit along the beam of the mobile unit (Y-axis) is driven by helical rack and pinion transmission, offering increased tooth-to-tooth engagement for higher acceleration and greater speed along both the X and Y axes. The specially designed helical teeth ensure reduced wear of mechanical parts and significantly quieter operation. The vertical Z-axis is driven by a recirculating ball screw, engineered to deliver perfect balance under dynamic load and handle both rapid acceleration and deceleration. The main milling unit is directly coupled to the Z-axis slide, ensuring the highest quality of finishing work by completely eliminating potential vibrations. Movement along the X-Y-Z axes is driven by brushless motors powered by static inverters, which provide: - Reduced processing times thanks to improved acceleration - Increased positioning accuracy due to high-resolution encoders - No need for setup resetting when the machine is powered on thanks to absolute encoders - Minimal maintenance, as the brushless system eliminates the need for brushes Axis movement and all machine work functions are managed via an industrial NS module with digital D...