Mesin kawat EDM

Makino EU64

Kondisi: bekas, Tahun pembuatan: 2004, Technical specifications: Fodpfx Amjuzbaye Sogc Table length: 920 mm Table width: 600 mm Current: 13.2 A Machine weight approx.: 6 t Required space approx.: 2,46 x 2,24 x 2,33 m X-axis travel: 600 mm Y-axis travel: 400 mm Z-axis travel: 260 mm Maximum table load: 1,500 kg Dimensions for transport: Width 2,240 mm x height 2,330 mm x depth 2,460 mm, weight approx. 6,000 kg.

Kondisi: bekas, Tahun pembuatan: 1998, Technical Details: Fjdowwlt Rjpfx Am Sogc Swing diameter: 830 mm Turning length: 4,000 mm Swing diameter over cross slide: 540 mm Spindle bore: 130 mm Speed range: 2 – 1,600 rpm Rapid traverse speed: 4 / 5 m/min Feed speed: 1 – 2,000 mm/min Total power requirement: 55 kW Machine weight approx.: 7.5 t Floor space required approx.: 7 x 2.2 x 2 m Equipped with R&D MTC-K cycle control MULTIFIX tool post, size D Coolant system

Kondisi: baru, Tahun pembuatan: 2021, Fungsionalitas: berfungsi sepenuhnya, Stock machine "NEW" – available at short notice! (Subject to prior sale) Control: Fanuc 0i-MF Plus, 10.4" with Manual Guide i & 2 MB NC memory LOOK-AHEAD function, 400 blocks Machine table: Table size: 950 x 550 mm Max. load: 800 kg T-slot width: 18 mm Number of T-slots: 3 T-slot spacing: 150 mm Travel ranges: Travel X/Y/Z: 860/550/550 mm Spindle nose to table surface: 150 - 700 mm Linear guides & speeds: Ball guides on X/Y axis Roller guides on Z axis Rapid traverse X/Y/Z: 40/40/30 m/min Feed rate during milling: 0 – 10,000 mm/min Minimum increment: 0.001 mm Tool magazine (CAM-Type) / changer: Magazine capacity: 30 tools System: random access Max. tool diameter: Ø 75 mm Max. tool diameter with free adjacent slots: Ø150 mm (40 tools: Ø130 mm) Max. tool length: 300 mm Max. tool weight: 7 kg Spindle: Spindle taper: SK-40 Drive power (30min/cont.): 18.5/11 kW 15,000 rpm direct-drive spindle Spindle oil cooler Coolant, chip, and compressed air management: Coolant system incl. 300-liter tank and pumps External coolant around spindle Chip spirals right and left in machine bed Compressed air nozzle at spindle (M32/M33) Compressed air through spindle (M38/M39) Compressed air and coolant gun Other features: Fgsdeifn N Nepfx Am Sec Swiveling control panel Electronic handwheel (wired) Central lubrication oil/air Fully enclosed Work light Heat exchanger on control cabinet Auto power off function Hand tool set Signal lamp Transformer 400 VAC, 50 Hz CE Declaration of Conformity per European directives Electrical and pneumatic requirements: Electrical connection: 36 kVA Required pneumatic input pressure: 6 bar Dimensions: Machine size: W2,260 x D2,900 x H2,775 mm Required installation space: W3,160 x D3,000 x H3,000 mm (including chip conveyor discharge to the left) Machine weight: approx. 5,400 kg (net) Included special equipment: Spindle: - Direct-driven spindle SK-40, 15,000 rpm - Drive power (30min/cont.): 18.5 / 15 kW, (FANUC motor) Tool magazine / changer: - Drum-type tool magazine with 30 slots, DIN69871, SK-40 Rotary or additional axes: - Preparation for 4th axis (FANUC control), incl. wiring and Harting connector without axis driver Coolant, chip, and compressed air management: - Bed wash - Through-spindle coolant pump with 20 bar pressure, for direct-drive spindles - incl. cartridge filter - Belt-type chip conveyor incl. chip bin (chip discharge front to left machine side) Measuring and monitoring systems: - RENISHAW OMP-60 touch probe with infrared transmission system for workpiece measurement, incl. probe holder, repeatability: 1μm - RENISHAW NC4+ tool laser measurement system and tool breakage control in the machine, incl. holder - Auto-door (side door) - Pneumatic interface for workpiece clamping - Included clamping devices as shown with RoboJob Mill Assist 25kg (Year 2025 - NEW) - Full enclosure - Double gripper Immediately available

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2008, jarak pergerakan sumbu X: 1.270 mm, jarak lintasan sumbu Y: 508 mm, jarak gerak sumbu Z: 635 mm, kecepatan spindel (maks.): 12.000 rpm, daya motor spindle: 22.400 W, jumlah sumbu: 3, This 3-axis vertical machining center HAAS VF-4SS was manufactured in 2008. It features a travel range of 1270 × 508 × 635 mm, 22.4 kW spindle power, and a maximum spindle speed of 12,000 rpm. The machine is equipped with a tool changer with 40 + 1 positions and a high-speed machining package. If you are looking for a high-quality milling machine, you should consider the HAAS VF-4SS we are offering for sale. Contact us for further information. • Spindle-to-table distance: 102 mm • Tool holder taper: CT40 (DIN 69871) • Max. cutting feedrate: 20.5 m/min Fgjdpfjx D Irmjx Am Ssc • Rapid traverse (X/Y/Z): 35.6 m/min • Tool changer type: Random vertical • Tool magazine capacity: 40 + 1 positions • Data interface: USB • Options/Features: • Through-spindle coolant system (21 bar) • 4th axis drive and wiring (prepared for 4th axis) • Intuitive programming system • Dual spindle orientation • Coordinate rotation system • Macro variables and scaling functions • High-speed machining package Additional equipment • Auger-type chip conveyor • Additional high-pressure filtration system

Kondisi: bekas, Kaltenbach KKS 400 NA Mitre Cold Circular Saw Automatic Machine Machine No. 101701 Year of manufacture: 1983 Saw blade diameter: 400 mm Cutting capacity at 90° round: Ø 130 mm Cutting range at 90° square: 120 x 120 mm Cutting range at 90° rectangle: 305 x 20 mm Cutting capacity at 45° round: Ø 130 mm Cutting range at 45° square: 110 x 110 mm Cutting range at 45° rectangle: 245 x 30 mm Clamping range, vice feed: 30 to 140 mm Fodpfx Ajd N H A Nsm Sjgc Working height: 1000 mm Mitre cut: 0 - 180° Feed stroke: 600 mm Saw blade speed: 10 + 20 m/min, 2 steps Motor power: 1.7 and 2.6 kW Hydraulic motor: 1.5 kW Electrical connection: 380 Volt, 50 Hz - Hydraulic material vice feed with infeed roller conveyor on the left, 1500 mm - Double-stroke feed up to 1200 mm (feed twice, then cut) - Hydraulic material clamping with vertical pressure cylinder - Mitre cutting angle adjustable by hand - Hydraulic feed control, cutting speed adjustable manually - 2 motor speeds for the saw blade speed - Saw blade stroke infinitely adjustable - Coolant device with electric pump in machine base - Hydraulic unit fixed to the main machine - Piece counter with zero reset Saw dimensions (LxWxH): 2600 x 1200 x 1900 mm Saw weight: approx. 1400 kg Good condition

Kondisi: bekas, Tahun pembuatan: 1980, Sägeblattdurchmesser 380 mm pneumatische Klemmung ja Masch.-Nr.: 46893 Maschinengewicht ca. 1,3 t +++++ Bitte beachten Sie, dass die Maschine im demontierten und verladebereiten Zustand ist. Aus diesem Grund ist eine Vorführung unter Strom oder die Fertigung eines Videos nicht möglich. Darüber hinaus enthält unsere Anzeige die aussagefähigsten Fotos von bestmöglicher Qualität. Die Zusendung weiterer Bilder ist leider nicht möglich. +++++ Fgjdpfx Amsd N Sm Ds Soc

Kondisi: baik (bekas), Tahun pembuatan: 2016, jam operasional: 25.000 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: - 396.900.171.0076, jarak pergerakan sumbu X: 600 mm, jarak lintasan sumbu Y: 400 mm, jarak gerak sumbu Z: 350 mm, panjang total: 1.030 mm, Mesin dalam kondisi sangat baik dan dapat diperlihatkan dalam keadaan teraliri listrik. Fgodpfx Amoyit Ule Soc

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2015, jam operasional: 12.244 h, kecepatan spindel (maks.): 4.500 rpm, jarak pergerakan sumbu X: 230 mm, jarak gerak sumbu Z: 740 mm, daya motor spindle: 11.000 W, tinggi total: 1.620 mm, berat keseluruhan: 4.200 kg, produsen pengendali: SIEMENS, model controller: 840D-SolutionLine, jumlah sumbu: 2, This 2-axis horizontal lathe SPINNER TC 600-65MC was manufactured in 2015 and is equipped with a Siemens 840D control system and a 16-station turret. It features a main spindle with speeds up to 4,000 rpm and a power output of 24 kW. The machine offers a swing diameter over the bed of 425 mm and a maximum turning diameter of 310 mm. Consider the opportunity to purchase this SPINNER TC 600-65MC horizontal lathe. Contact us for further details about this machine. Additional Equipment • Full enclosure splash guard + coolant system • Work area lighting + pneumatic equipment • Panoramic window for optimal visibility of the working area Machine Advantages Technical Advantages • Centre distance: approx. 600 mm • Maximum turning diameter: 310 mm • Spindle torque: main spindle (Fanuc, S6 40%) 178 Nm, main spindle (Siemens, S6 40%) 301 Nm • Quill stroke: 120 mm • Travel: 475 mm • Speed of driven tools: 6,000 rpm • Driven tool power: (Fanuc, 30 min) 3.7 kW, (Siemens, 40%) 6.0 kW Additional Information Media Pneumatics max. operating pressure: 10 bar Standard pressure: 6 bar Hydraulics max. operating pressure: 30 bar Control Control system: Standard Siemens 840D, Option Fanuc 21i Operating voltage: 400 V Mains frequency: 50/60 Hz Control voltage: 24 V DC Interfaces: USB, Ethernet, SPINNER-UNIMAG bar feeder (electric) Fgjdpfxsx D E Hns Am Ssc

Tahun pembuatan: 2002, Kondisi: baik (bekas), Manufacturer: Matsuura Model: LX-O Control: YASNAC Year of manufacture: 2002 Specifications Metric US Standard X-axis travel: 330 mm Y-axis travel: 300 mm Z-axis travel: 250 mm Table length: 540 mm Table width: 320 mm Table load capacity: 100 kg Feed rate X-axis: 90,000 mm/min Feed rate Y-axis: 90,000 mm/min Feed rate Z-axis: 90,000 mm/min Tool holder: ISO 30 / BT / MK Spindle power: 7.5 kW Spindle speed: 40,000 rpm Tool changer: 30 positions Chip conveyor: Yes Dimensions (approximate) Length: 2,800 mm Fedelz Rvlepfx Am Sogc Width: 2,600 mm Height: 2,800 mm Please note: The information on this page has been provided to the best of our knowledge and, where possible, obtained from the manufacturer. The information is given in good faith, but accuracy cannot be guaranteed. Therefore, no representations or contractual terms are implied. We recommend verifying all important details.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2014, Manufacturer: Spinner Model: TC-400 Year of manufacture: 2014 Control system: Fanuc 32iTB Max. bar capacity: Ø 52 mm Equipment: - Short bar loader Spinner Servo-Load 80-1500V2 with storage rack - Control: Fanuc 32iTB with color LCD screen / control panel 1 - Drive motors for X/Z axes and spindle by GE Fanuc, digital AC technology - Travel ranges: X = 200 mm, Z = 515 mm - Main spindle up to 5,000 rpm / 52 mm; power 18 kW; torque 113 Nm (S6 = 40%) - Built-in spindle motor with water cooling, spindle nose A6 - C-axis for spindle incl. software option "Transmit" for face machining and "cylindrical interpolation" for peripheral machining - Hydraulic hollow clamping cylinder - 12-position turret for tool holders, per DIN 69880/30mm - 12 driven tool stations with turret for milling and drilling operations Fjdpfowwucusx Am Sogc - Tailstock for TC400, Morse taper MK4 - Chip conveyor for TC400, with enlarged, L-shaped coolant tank, approx. 150 liters with centrifugal pump 50l/min, 3.3 bar - Parts catcher - Tool measuring arm - High-pressure pump - Electrostatic air cleaner