Mesin bubut siklus

MAS MT32 NC

Kondisi: hampir baru (bekas), Tahun pembuatan: 2021, Fungsionalitas: berfungsi sepenuhnya, This multi-axis lathe CMZ TTL-66-66-T1Y-T2Y was manufactured in 2021. It features a maximum bar capacity of 66 mm (both spindles), a turning diameter up to 220 mm, and a main spindle power of 35.5 kW. The machine is equipped with two high-performance spindles (66 mm bar capacity), two tool turrets with 12/24 tool stations, driven tools with 14 kW and 12,000 rpm, as well as Y-axis functionality for both the upper and lower turrets. A 35-bar high-pressure coolant system with integrated filtration and an additional tank is also included. For further details, please refer to the attached brochure or contact us directly. Equipment: - LPS for left spindle - Reducing tube for left spindle - Hainbuch AXFIX 65 (standard) collet chuck 2703/0008 for left spindle - Hainbuch AXFIX 65 (standard) collet chuck 2703/0008 for right spindle - Tool presetter - Side-mounted chip conveyor (standard version) - Upper tool turret (T1) high-pressure coolant pump with three programmable pressure levels (35, 15 & 6 bar), including 75 μm filter - Lower tool turret (T2) high-pressure coolant pump with three programmable pressure levels (35, 15 & 6 bar), including 75 μm filter - Coolant washing nozzle - TA/06000/10 coolant chiller with 8,000 W cooling capacity - Machine status indicator - Tool life management - Tool load monitoring - Programmable automatic parts catcher (pneumatic) - The workpiece removal unit is equipped with a gripper that opens and closes pneumatically for part extraction - Pneumatic ejector for the sub-spindle with 100 mm adjustable stroke; end position detected by sensor - Coolant supply through right spindle - Interface for bar feeder (unimag) - Prepared for extraction system, connection flange Ø100 The machine comes with a chip conveyor, coolant unit, and tool package. It can be inspected under power and is available immediately. Operated in single-shift mode only. Kwjdpfx Acjxmhdno Hju Further information upon request.

Kondisi: bekas, Tahun pembuatan: 2002, hu Kwjdoxhqqmepfx Ac Hsu

Kondisi: baik (bekas), Tahun pembuatan: 2002, Control system: HEIDENHAIN TNC 430 Spindle speed: 20 - 9,000 rpm Travel paths: X = 500 mm, Y = 400 mm, Z = 400 mm Tool holder: SK 40 Tool changer with 16 stations Rotary table with B and C axis Clamping area: Ø 700 x 500 mm Max. table load: 200 kg Kwjdpfxjwglfxe Ac Hou Infrared probe for workpiece measurement

Kondisi: bekas, Tahun pembuatan: 2005, Fungsionalitas: berfungsi sepenuhnya, jarak gerak sumbu Z: 1.219 mm, kecepatan rotasi (maks.): 2.000 rpm, jarak pergerakan landasan silang: 203 mm, Flat bed lathe Manufacturer: Haas Model: TL-2 S/N: XXXXX Year of manufacture: 08-2005 Operating hours: n/a Control unit: Haas CNC Technical specifications: ----- - 4-position quick-change tool post, Parat system - Z-axis travel: 1,219 mm - X-axis travel: 203 mm Kodpfx Aewftdmoc Hswu - Swing over bed: 406 mm - Swing over cross slide: 282 mm - Spindle bore: 76 mm - Spindle speeds: 10 - 2,000 rpm - Coolant system - Tailstock / MT 4 - Weight: 2,100 kg Accessories: ----- - 3x Parat toolholders - 3-jaw chuck - Documentation

Kondisi: bekas, Tahun pembuatan: 2006, de-2006 Hurco VM1 Vertikal-Bearbeitungszentrum Baujahr: 2006 Technische Daten – Hurco VM1 VMC Allgemeine Angaben Abmessungen Breite: 1.800 mm Abmessungen Tiefe: 1.900 mm Abmessungen Höhe: 2.600 mm Maschinengewicht: 2.700 kg Hauptantrieb Anzahl der Spindeln: 1 Spindeldrehzahlbereich: 40–8.000 1/min Spindelmotorleistung: 11 kW Kjdsv Suwiopfx Ac Howu Verfahrwege X-Achse Verfahrweg: 660 mm X-Achse Arbeitsvorschub: 8 m/min X-Achse Eilgang: 20 m/min X-Achse Genauigkeit: 0,005 mm Y-Achse Verfahrweg: 350 mm Y-Achse Arbeitsvorschub: 8 m/min Y-Achse Eilgang: 20 m/min Y-Achse Genauigkeit: 0,005 mm Z-Achse Verfahrweg: 450 mm Z-Achse Arbeitsvorschub: 8 m/min Z-Achse Eilgang: 20 m/min Z-Achse Genauigkeit: 0,005 mm Werkstück Werkstückgewicht: 350 kg Aufspanntisch Außenlänge: 762 mm Außenbreite: 356 mm Lieferung & Aufstellung gegen Aufpreis möglich – bitte Preise anfragen.

Tahun pembuatan: 2004, Kondisi: sangat baik (bekas), The Multivac R230 packaging machine is an advanced device primarily used in the food industry for packaging a variety of products, such as meat, cheese, seafood, ready-made foods, and many others. This machine is designed to create thermoformed packaging, utilizing vacuum technology to preserve the freshness and quality of packaged goods. Equipped with a Busch RA 0100B vacuum pump and constructed from stainless steel, the Multivac R230 is adapted for use with 320 mm film width and features various forming and cutting configuration options. Its application is widespread across many food industry sectors, from bakeries to meat and fish processing plants. Kodpovzt Hujfx Ac Hewu

Kondisi: baik (bekas), Tahun pembuatan: 2000, Fungsionalitas: berfungsi sepenuhnya, kapasitas pengeboran: 40 mm, gores kuas bulu: 200 mm, diameter quill: 80 mm, Machine Specifications • Worktable 1800 x 600 mm with 4 T-slots • Arm travel 1050 mm • Drilling spindle SK 40 with tool clamping system • Infinitely variable speed programming • Infinitely variable quill feed via three-phase servo motor • 2 T-slots (18 mm) at the rear of the machine base • 2 T-slots (18 mm) on the left side of the machine base • Thread cutting device • Central lubrication • Coolant system • Machine lamp • CE marking • Safety guard • USB interface Dimensions and Travel Tool holder SK 40 Column diameter mm 195 Table dimensions mm 1800 x 600 Number of T-slots 4 Kwedpfx Aju Aa I Ssc Hsu Distance between T-slots mm 125 Quill stroke (Z-axis) mm 200 Column travel (W-axis) mm 410 Distance spindle underside - min mm 70 Table top max. mm 680 Distance spindle underside - min mm 970 Floor max. mm 1580 Drilling radius mm 540 - 1590 Working table height mm 900 Machining Capacity Drilling capacity solid St 60 Ø 40 GG 22 Ø 50 Thread cutting St 60 M 36 GG 22 M 42 Main Spindle Drive AC motor, frequency controlled kW 5.5 at 100% ED. Speed range: min-1 15 - 2800 Torque Nm max. 250 Constant from min-1 15 – 2000 Feed Drives X-axis - AC servo motor kW 0.25 Y-axis - AC servo motor kW 0.25 Z-axis - AC servo motor kW 4.50 W-axis - AC servo motor kW 2.50 Rapid traverse speeds (X/Y/Z): m/min 7.5 / 7.5 / 5 Rapid traverse speed (W): m/min 3 Feeds, infinitely variable mm/min 5 – 2000 Accuracy Positioning accuracy X-, Y-axis over 1200 mm mm ± 0.075 Electrical Data Operating voltage / frequency V / Hz 400 / 50 Control voltage V 24 Hydraulic unit for clamping kW 0.75 Total connected load kVA 13.0 Weight Danumeric 440 (without packaging) with table 1800 x 600 mm kg 2800 CNC Control Axes: 4 (X, Y, Z, W), expandable Processor: 32-bit CPU Screen: TFT flat display, backlit, clearly visible from all sides, 215 x 160 mm Position display: Cartesian or polar, absolute or incremental values Measuring unit: mm or inch / degrees Interpolation: 2 axes (X, Y) Technology Database: Tool management, tool suggestions according to machining process, material-dependent cutting data suggestions Tool management: max. 500 tools Subroutine technology: yes Machining Cycles Standard software options: Conversational programming, 38 zero point offsets, rotation and mirroring, teach-in for X, Y, Z, program restart with selection functions for targeted entry Zero point determination: Cycles for determining zero points by manually probing the workpiece for: - Freely mounted rectangular parts - Freely mounted round parts - Centering for cast and flame-cut parts - Angle position detection for round parts by probing reference edges/surfaces Test graphics: Graphical display of drilling patterns Data interfaces: USB

Kondisi: seperti baru (mesin pameran), Fungsionalitas: berfungsi sepenuhnya, jenis pendinginan: air, EN_FRONIUS TPS 5000 ✅ Scope of delivery: ➤ Fronius TPS 5000 power source (500A TRANS PULS SYNERGIC) ➤ Fronius FK 4000 ➤ Fronius VR 4000 wire feed unit ➤ Fronius intermediate hose package standard from 1.5m ➤ Fronius trolley ➤ Fronius torch package ➤ Ground cable 3-4m ➤ Pressure regulator With this device, almost all materials can be welded, including aluminium, steel, and stainless steel (V2A). It is equipped with filler wire programs and is also suitable for MIG brazing (CuSi), which is commonly used in the bodywork industry. Kwedpfx Aewbh Ifjc Hsu Additional options and applications: This TPS series can easily be connected to a robot. You only need an interface and the corresponding hose package for integration. Optionally, we offer the RCU 5000i control panel, which allows you to create and import characteristic curves, further extending the functions of the TPS unit. ----- IMMEDIATELY AVAILABLE PROPER INVOICE An inspection is possible in Vienna 1230, Austria! ✔ Insured pallet shipping is not a problem! ✔ ✅Questions✅Questions✅Questions✅Questions: ✅Questions✅Questions✅Questions✅ ►►►What is the condition of the device? For your information, we purchase used equipment in almost-new condition, disassemble them, check everything thoroughly, replace wear parts if necessary, and only release them for sale after successful test welding. "All" devices are clean and have neither burn marks on the displays nor countless burn holes or dents on the machine! You are buying an item from us that is presentable and does not look worn out! ►►►Do we receive an invoice when purchasing from you? Yes, you will receive a proper invoice from us. If you have a valid VAT ID, we can issue a net invoice for intra-community supply within the EU, provided the relevant requirements are met. ►►►What payment options are available? Prepayment or cash on personal pickup ►►►Is insured shipping possible? Yes, we are happy to send your purchased set well-packaged and insured on a Euro pallet. ►►►Is there a warranty? We sell the machines at a third of the new price and unfortunately do not have the leeway to offer a warranty. However, the devices can be tested on-site and paid for in cash. ►►►Why buy from us? We are professionals for this series of Fronius welding machines and always have 60-80 units in stock – exclusively Fronius, no other manufacturers! We know these units inside out and do not sell anything we are not familiar with.

Kondisi: baik (bekas), Tahun pembuatan: 1989, jam operasional: 64.136 h, Centre height: 350 mm Turning length: 1000 mm Max. swing diameter over bed cover: 600 mm Max. swing diameter over cross slide: 360 mm Spindle bore: 107 mm Speed range: 16 – 3,150 rpm Feed range longitudinal & cross: 0.5 – 5,000 mm/min Rapid traverse longitudinal & cross: 9 m/min Main drive: 30 kW Dimensions of the machine with chip conveyor (L x W x H): 5,400 x 2,200 x 2,000 mm Weight: 6,400 kg Accessories / Special Features: • CNC control GILDEMEISTER EPL 2 with TFT display General Description: CNC manual input control with programming via function and numeric keypad. All data entry in dialog with the screen. Integrated menu navigation and plaintext display of all functions. Control keypad, screen, and handwheel in a separate chip guard hood. The EPL control offers the following possibilities: Programs can be entered and modified without prior programming knowledge, directly by operator guidance through the EPL control. NC programs in ISO/EIA format can be entered and output via serial RS 232 interface, or entered directly by hand. Machining Cycles: Roughing cycles for longitudinal, facing, and contour turning, also with excess allowance. Threading. Undercuts according to DIN 509 Form E and F and DIN 76, and programmable grinding allowances. Axial and radial grooves to DIN 471 and 472, also with bottom finishing. Radii at 90° and chamfers at 45°. Automatic tool nose compensation for cycles, undercut, groove, radius, and chamfer. Programming: Block-oriented, metric/inch, diameter input in absolute mode, radius in incremental mode, full circle programming, subprogram technology with skip levels for program sections. Zero point offset. Operating mode selection via menu. Program input and output: Dialog via menu with operator guidance or direct dialog input. Kwedpfx Acjvr Eh Ee Heu • Hydraulic 3-jaw chuck Ø 315 mm with hollow spindle Ø 80 mm • Hinged-chip conveyor • 12-position VDI 40 tool turret, 6 standard tool positions + 6 driven tool positions • Coolant system • RS 232 interface • Electronic handwheel • Electric foot switch for 3-jaw chuck and tailstock quill • Lighting • 12 pcs. various standard tool holders (details to be discussed on site) Overhauled servo drive for the main spindle, 06/2025 Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2022, Oil-hydraulic Double-Column Press 400 T with Sliding Table Press Type: Double-Column Press Kedpfsph Uk Nex Ac Hjwu Thermally Neutral Range: 80 – 120 °C Number of Operator Sides: 1 side Forces: - Pressing Force max.: 4,000 kN - Free Tearing Force max.: 400 kN - Pressure Build-Up Time (Closed Tool, Steel on Steel): Max. 4 sec. Dimensions: - Length: 3,800 mm - Width: 4,475 mm - Max. Opening: 800 mm - Stroke: 800 mm - Table Height above floor: 1,100 mm - Total height above floor (overall height): approx. 4,300 mm - Minimum hall height: 5,500 mm - Parallelism deviation at 20°C: +/- 0.1 mm Deflection: - Determined at max. closing force with 70% coverage: ≤ 0.2 mm/m Weight: - Total weight of the press (without operating fluids and table plate): approx. 28 t Press Table: - Table size: 1,500 x 1,500 mm Speeds: - Fast closing speed: 100 mm/s - Pressing speed: 8 – 3 mm/s Noise Level: - Sound pressure level measured at 1.5m height at control panel according to DIN 45635-T16-KL3: max. 78 dB(A) Hydraulics: - Number of main cylinders/ram cylinders: 1 pc. - Operating pressure: max. 300 bar - Pressure build-up time (press): 4 sec. - Pressure accuracy during ram stroke: +/- 3 bar - Main pump: BOSCH REXROTH axial piston pump approx. 145 L/min - Oil volume: approx. HLP 46 MW, 1,000 liters - Ambient temperature: max. 40 °C - Oil temperature: max. 55 °C - Auxiliary pump: BOSCH REXROTH gear pump 10 L/min for pressure maintenance up to 300 sec. Electrical System: - Main supply: 400 V AC - Control voltage: 24 V DC - Frequency: 50 Hz - Hydraulic main motor connection: 40 kW Features: - Sliding table press with 400 T capacity - Closing speed up to 100 mm/s (adjustable via touchscreen) - Opening speed up to 100 mm/s (adjustable via touchscreen) - Pressing speed start at 10 mm/s (adjustable via touchscreen) - Table plate size: 1,500 x 1,500 mm - Ram size approx. 1,600 x 1,500 mm - Oil temperature monitoring: 55°C warning, 60°C shutdown - Automatic lubrication (adjustable via touchscreen) - Free positioning of ram (adjustable via touchscreen) - SICK/PILZ light curtains 14 mm, front, up to 1,800 mm height - Hydraulic and mechanical ram locking - Circulation oil cooling (adjustable via touchscreen) - Ejector in table, 20 T press force, 350 mm stroke - Ejector travels outward with table - Table plate precision milled, with DIN 22 T-slots - Pressure setting from 60 T to 400 T (adjustable via touchscreen) - Travel limit optionally by pressure or position - Setup, single stroke, and automatic cycle operation (adjustable via touchscreen) - Swivelling control panel on cabinet - Two-hand safety operation, with open button, selector switch for manual/single stroke/automatic cycle - Assembly, commissioning, and training available at extra charge - Control system supplied by SIEMENS (S7 1200), with 9-inch touchscreen monitor. Scope of delivery includes SECOMEA Ethernet-based remote maintenance unit. - The press features two side windows, each 1,000 mm high and 800 mm wide, with double doors. (Sliding Table Press, Hydraulic Press, Double-Column Press)