Paletisasi

Maschinenbau GmbH

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 2010, • Travel range: X = 3,100 mm, Y = 1,950 mm, Z = 1,390 mm • Heidenhain iTNC 530 with HR 410 handwheel • Machine table for multi-sided machining, 3,000 mm x 1,600 mm • 2-axis NC universal drilling and milling head, suitable for simultaneous and positioning operation • Spindle: 10,000 rpm, HSK 100 interface, 130 Nm spindle torque • Tool changer system: HSK 100 / 40 pockets for tools up to 750 mm in length • Chip augers in X-axis for optimal chip evacuation • Chip conveyor (scraper type) for cross transport, manufacturer: Knoll • Coolant supply, 900 L, manufacturer: Knoll Ljdpfjyl Scmox Adnorh • External air • ICS (internal coolant supply) 60 bar for deep hole machining • Full enclosure with safety glass panels, open at the top for optimized crane loading • Split sliding doors at the front • Split sliding doors at the operator side • Wireless probe RMP 60 • Including wash gun • Including platforms at loading and operator sides • Completely factory overhauled and newly painted • Short delivery time upon agreement, subject to prior sale • Used machine • Y-axis ball screw replaced including bearings in September 2021 • X-axis linear guide and carriages replaced in July 2023 • Milling spindle overhauled in May 2023 (new clamping set, new clamping cartridge, new rotary union, general inspection) (23,105 spindle hours) • Under power for inspection in 72793 Pfullingen • Optional: leveling shoes • Optional: commissioning/installation • Optional: transport • Total spindle hours: 23,122 • Total machine hours: 53,991 • Year of manufacture: 2010 Subject to prior sale

Tahun pembuatan: 1998, Kondisi: hampir baru (bekas), Rondstapel-aanvoer, eerste vouwunit TD78/4-1 met 4 zakken, tweede unit TD66/4-2 met 4 zakken, derde unit met mes Stahl EF63 (1984), SBP 80 persafvoer, geen pomp - de machine werkte op de interne persluchtvoorziening. Lrodpjd Tnxlsfx Adnsh

Kondisi: baik (bekas), Výrobca: Plastik-Maschinenbau GmbH (PM) Model: PM Wiska 30-25 D Výrobné číslo: M0793 Krajina výroby: Západné Nemecko (Kelberg / Eifel) Typ: jednozávitovkový plastový extrudér Dokumentácia: Súčasťou dodávky (pôvodný nemecký manuál a korešpondencia z roku 1987) Stav: Použitý, ale kompletný a funkčný Miesto uloženia: Ivanka pri Nitre, Slovensko Technické údaje (približne) Priemer závitovky: 30 mm L/D pomer: 25 D Hlavný motor: Lenze GFOT 100-24 (440 V / 26 A / 2 kW / 3000 ot/min) Napájanie: 3 × 380–420 V / 50 Hz Riadiace napätie: 220 V Chladenie: Vzduchom chladený valec s vykurovacími zónami Ledpfx Adjxu E E Ssnorh Riadiaca skriňa: Súčasťou dodávky, vrátane relé, ističov a analógových meradiel Popis: Kompaktný, jednozávitovkový laboratórny alebo malosériový extrudér od spoločnosti Plastik-Maschinenbau GmbH vyrobený v Západnom Nemecku. Určený na spracovanie termoplastických materiálov, testovanie materiálov alebo pre menšie extrúzne linky (napr. výroba hadičiek, profilov alebo na poťahovanie). Obsahuje originálny elektrický rozvádzač, manometer a kompletnú dokumentáciu. Po mechanickej aj elektrickej stránke je kompletný, vyžaduje už len štandardné uvedenie do prevádzky.

Kondisi: bekas, Tahun pembuatan: 2006, jam operasional: 100 h, Fungsionalitas: berfungsi sepenuhnya, Professional Industrial Cutting Line (Longitudinal/Cross) – Grossmann – ONLY 100 Operating Hours! Description: For sale is a high-precision, automated longitudinal and cross-cutting machine from the renowned manufacturer Grossmann Maschinenbau. The system has a total runtime of no more than 100 operating hours. This means it is in a nearly new technical condition, with minimal wear on the mechanical components. The machine was originally designed as a chipboard mat cutting machine, but thanks to its robust construction and versatile PLC control, it is flexible for a wide range of materials (e.g. rubber, cork, fleece, composites, foils, textiles, etc.). Technical Highlights & Equipment: Condition: Almost as new (max. 100 operating hours). Format: Maximum cutting length 2,500 mm x maximum working width 1,200 mm. Complete line: Includes professional unwind and rewind units for fully automatic material flow from roll-to-roll or roll-to-sheet operation. PLC Control: Professionally programmed with selectable manual and automatic modes. Material Handling: Automatic gripper feed for precise material positioning, plus integrated edge extraction for perfectly cleaned edges. Operation: Intuitive control panel with display, footswitch, and optical/acoustic completion signals (traffic light/horn). Precision: Integrated laser for exact material alignment. Safety: Fully enclosed design and modern safety monitoring systems. Versatility: This machine is a true all-rounder for any roll-fed materials that need to be cut into precise sheets or strips. The sturdy construction on a high-quality aluminium profile frame ensures maximum torsional rigidity. Lrodpfsylxmfjx Adnoh Complete documentation, including process protocols, wiring diagrams, and technical drawings, is fully available. The machine can be inspected and tested under power by arrangement. I am happy to answer any detailed technical questions or application inquiries personally. Contact: Phone: 05427 9423 20

Kondisi: bekas, Tahun pembuatan: 2019, Overview The fill level inspection system was manufactured in 2019 by the German producer Krones. The machine is currently not installed. Technical details: - Capacity: 50,000 bph Lrsdpfsl Hxnijx Adnsh - Inspection via gamma ray - Krones Checkmat with reject table and pusher

Kondisi: hampir baru (bekas), Tahun pembuatan: 2014, Fungsionalitas: berfungsi sepenuhnya, GHD Georg Hartmann Maschinenbau GmbH, SELECTRA 25, 2014, kondisi baik. Kapasitas: hingga 3000 produk/jam Dimensi produk: Panjang: 160 - 400 mm, Tinggi: 50 - 150 mm Daya listrik: 5 kW Udara: 6,0 bar Siap kirim Lrodpsylurkefx Adnjh

Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, panjang tali: 30.000 mm, kecepatan tali: 47.000 mm/menit, nomor mesin/kendaraan: HAW1700-EV-Funk, Hydraulic winch for log splitters, cranes, mini excavators, tractors, vineyard and horticulture machinery, and many other applications. The hydraulic attachment winch makes various tasks much easier: - Pull and position firewood for log splitters - Winch logs onto trailers - Extract rootstocks and trees - Use as an auxiliary winch on timber loading cranes and small excavators - Suitable for compact tractors and narrow-gauge tractors Featuring a robust steel construction with 3-sided mounting options (left, right, rear) and 12 threaded holes, this design offers versatile installation possibilities. (Threads are pre-cut and painted; re-tapping is required before use due to the corrosion protection.) It is equipped with a 20 m long, 6 mm thick steel cable. The large cable drum ensures a long cable service life. We install hydraulic motors from 50 to 630 cc (standard = 400 cc), depending on the required speed and pulling force. Maximum working pressure: 225 bar peak Continuous operating pressure: 175 bar Displacement: 400 cc Torque at 225 bar: 870 Nm peak Continuous torque: 380 Nm Maximum pulling force: 1700 kg Weight: 49 kg Cable speed: 47 m/min at 60 L/min hydraulic oil flow Color: red Dimensions: Length: 500 mm Length with pendulum: 570 mm Width front: 120 mm Width rear: 180 mm Bearing width: +30 mm Motor width: +200 mm Lrsdpsdf Ufpjfx Adnoh Height: 250 mm The winch is available as a bolt-on unit or for welding. This version is supplied with electric hydraulic valve, radio remote control, and hoses to the motor. Item number: HAW1700-EV-Remote

Kondisi: baik (bekas), Tahun pembuatan: 2006, Horizon Stitchliner SL5500: Collating towers VAC 60a+m+m+m, ST40, Horizon ASF 30, SPF 30, Trimmer HTC 30, counter reading only 14.2 million. Ljdpfxovmfxge Adnerh

Kondisi: bekas, Tahun pembuatan: 2021, Fungsionalitas: berfungsi sepenuhnya, jenis arus masuk: tiga fasa, jangkauan kerja: 6.000 mm, ketebalan lembaran (maks.): 25 mm, berat keseluruhan: 800 kg, en-de-001 Lrjdpfx Adox S Ux Esnsh

Kondisi: bekas, Technische Details: Weight: approx. 80 kg Machine dimensions (LxWxH): approx. 0.77 x 0.45 x 0.5 m BRUSHING MACHINE for deburring / brushing of tube ends / welded profile tubes / tube bodies on the face side Lrodjwiu Smspfx Adnoh

Kondisi: bekas, Tahun pembuatan: 2006, de1 Ljdsvguhkopfx Adnerh

Kondisi: diremajakan ulang (bekas), Tahun pembuatan: 2001, XXL-Center RAS 75.06 - Data teknis umum dalam mm: Panjang tekuk: 6400 mm Ketebalan pelat maks (400N/mm2): 1,5 mm Ketebalan pelat maks (750N/mm2): 1,0 mm Ketebalan pelat maks (200N/mm2): 2,0 mm Jangkauan gerak rahang penjepit: 10 – 750 mm Ruang bebas di depan rahang hingga: 300° Meja pemasukan dapat ditarik keluar: ya Rahang penjepit: ya Ljdpfx Aex Hf Tvsdnerh Pemrograman: otomatis via Bendex Dimensi mesin termasuk pagar pengaman sekitar: 9400 x 3000 Berat: 12,5 ton - Data terkait mesin: Pengoperasian bermotor; 400V, 50/60 Hz, 3-Phasa Tahun pembuatan: 2001 Kondisi: Akan direkondisi total - Gambar hanya sebagai contoh -

Tahun pembuatan: 2026, jam operasional: 1 h, Kondisi: hampir baru (bekas), Fungsionalitas: berfungsi sepenuhnya, Deskripsi cara kerja pemisah ban: WAGNER Mesin Pembongkar Ban Bekas dirancang, dikembangkan, dan dibuat sedemikian rupa sehingga ban dapat dipisahkan dari pelek baja dengan mudah, cepat, dan efisien. Proses pengepresan berlangsung sekitar 60 detik. Hal ini dijamin oleh sistem hidrolik yang kuat dan dirancang untuk umur panjang. Ban mobil diletakkan di atas mesin press ban. Dengan mengoperasikan kedua tuas katup (perlindungan kecelakaan), 3 silinder hidrolik akan bergerak dan menekan ban serta pelek bersama-sama. Lrsdpfx Adjyffrusneh

Tahun pembuatan: 2002, Kondisi: sangat baik (bekas), JEWA Flexo Rotonir SM52: M.No.: 02010-0017 BALDWIN: Type: FK-1-500 // Serial No.: 151166 // Part No.: 150.01.0001 Lredpfjd Nd T Uox Adnoh

Kondisi: bekas, Tahun pembuatan: 2017, Diameter pipa (maks.): 80 mm, panjang mandrel: 4.500 mm, Mandrel bending machine S8004 ----- For the production of dimensionally accurate tube geometries with bending radii of up to 1.5xD → Maximum bending capacity tube 76 x 4 mm (400 N/mm²) → Maximum bending capacity tube 60 x 60 x 3 mm (400 N/mm²) → Maximum bending capacity tube 76 x 2.9 mm (stainless steel) → Total connected load 7 kW → Tube feed length 4.5 m Robust and durable steel construction in a rigid connection – no torsion-prone design caused by, for example, a split construction of bending head and mandrel carrier. Maintenance-free electromechanical drive of the bending axis. The control’s touch display allows for easy and intuitive programming and operation of the system. Once the tube is fed in, it is clamped in place in the carriage by the chuck, ensuring exact tube positioning and enabling the production of dimensionally accurate geometries. Also standard is a tube geometry check before the bending process: If the bending process is started at the wrong position, the machine does not grant approval, thus preventing operator errors. Optional additional features provide greater comfort and increase output, thereby improving system efficiency. Data exchange from the optional tube calculation software TBS-3D (PC version) is performed via USB stick or by FTP access of the computer to the machine control. USB or LAN (RJ45) ports are standard. Existing tube geometries can be easily and quickly converted, e.g., via the STEP format. Standard features: → Electromechanical drive of the bending axis 4 kW → Speed 2.9 rpm (=17°/sec) → Left-hand bending direction → Bending angle resolution 0.1° → Max. bending radius 200 mm → Bending shaft diameter 50 mm → Electronic length measurement ±0.1mm → Electronic rotation measurement ±0.1° → Manual stop system (longitudinal overrun stops) → Manual indexing system (15° rotational increments) → Three-jaw chuck for securing the tube in the carriage → External control panel PLC control system: → 10.1" touchscreen → ETH 10/100, X2X Link, USB → Foot pedal operation → Data transmission via network (W)LAN or USB → Material database Unique graphical programming: Simple geometries can be calculated directly on the machine. After entering length and angle, the control automatically calculates the feed values and bending angles. Hydraulics: → Hydraulic power 3 kW → Hydraulic tube clamping with adjustable clamping pressure → Programmable premature mandrel retraction Options (available as additional equipment): → Variable bending speed via frequency inverter or servo motors → Automatic tool retraction (manual or controlled) → Pneumatic chuck → Automatic mandrel lubrication → Pneumatic stop system (length + rotation) → Mobile version (with rollers) → Radius extension Lsdpfx Adottah Rensrh Photos show new machine.