Pusat permesinan CNC

Masterwood MVD 900

Kondisi: baru, MASTERWOOD CNC machining center Type MVD 900 - Edition Partnership - Demonstration machine Continuous feed machining, Ball screws on all axes, Network card for remote maintenance, Dujdpfxoyrhcpj Ahusr Integrated control cabinet, Saw unit for slot cutting in X-direction, Pick-up tool changer, Automatic central lubrication, Panel measurement sensor ----- Technical Data ----- min. workpiece length X: 250 mm, min. workpiece length Y: 80 mm, min. workpiece thickness: 10 mm, max. workpiece length X: unlimited mm, max. workpiece width Y: 990 mm, max. workpiece thickness: 60 mm, Main spindle motor power: 4.5 kW, Main spindle speed: 1,000 - 18,000 rpm, Main spindle interface: ISO 30, Number of vertical drilling spindles: 20 pcs, Saw blade diameter of saw unit: 125 mm, Number of tools in changer: 6 pcs, Extraction connection Ø: 100 + 100 mm Includes: - complete tool set: Drill set for boring head, 1 HW grooving saw blade, 2 x DP slot cutters, 1 HW-WP finish cutter, 3 collet chucks with collets - brand new demonstration machine -

Tahun pembuatan: 1997, Kondisi: baik (bekas), • Working width (mm): 1300 • CSD system Dodpoidi Ivjfx Ahujur • Cross-belt sanding unit • Longitudinal sanding unit – shoe • Brushing unit • Ionization

Kondisi: sangat baik (bekas), Tahun pembuatan: 2011, Used Horizontal Panel Saw Manufacturer: Holzma Model: PROFI HPL 430/43/22 Year of manufacture: 2011 Cutting length: 4300 mm Cutting width (program pusher travel): 4250 mm Roller rail (2-track element): 9 units Clamping grippers: 7 units, first 3 are 2-finger grippers Air cushion table, width 650 mm: 4 units, each 2160 mm long Central blower: 1 unit with increased blower capacity – 3 angled-lift clamping grippers (2-finger design) – 1 angled-lift clamping gripper (1-finger design) – 1st air cushion table: 800 mm wide – Speed package:-> Saw carriage feed: 1 – 150 m/min Dsdpfx Aeymx S Dohuour Technical data: Saw blade projection: 95 mm Saw carriage feed: forward 25 m/min, reverse constant 90 m/min Automatic cutting height adjustment Angle alignment device, min. pressing width 0 mm; max. pressing width equals full cutting length Main saw motor: 18 kW, frequency-controlled Scoring saw motor: 2.2 kW Operating voltage: 400 V (+10%/-5%) / 50 Hz Electrical connection rating with main saw motor 18kW: 28 kW Power Control CADmatic 4.0 control system with 17" flat display Labeling system with part graphics / labeling software / label printer PICA 104

Kondisi: baik (bekas), Tahun pembuatan: 2014, Fungsionalitas: berfungsi sepenuhnya, System comprising: PANEL SAW SELCO WNT 610 / 4500 x 2200 mm PC-BASED CONTROL SYSTEM • Max. cutting length: 4,500 mm • Max. main saw blade projection: 95 mm • Max. opening of clamping grippers: 90 mm • Min. panel dimensions (from rear): 1,830 x 915 mm Dodpfjxranpox Ahuour • Max. panel dimensions (from rear): 3,100 x 2,200 mm • Min. panel thickness for rear feeding: 3 mm • Worktable height: 985 mm • Main saw motor: 15 kW • Main saw blade diameter: 380 mm • Scoring saw motor: 2.2 kW • Scoring saw blade diameter: 200 mm • DIGISET: electronic adjustment from scoring to main saw • QUICK CHANGE: fast saw blade change at the push of a button • Saw carriage drive: 1–140 m/min • Integrated side aligner in saw carriage: 0–4,200 mm • Automatic measuring system for manual cuts • Pusher extension from 5,500 to 7,800 mm • 10 pneumatic double-finger grippers on the pusher • 3 front aligners • 16 support roller rails behind the machine table • 4 rounded air cushion tables in front of the machine table, incl. movement device for table 2 • Automatic ejection of end pieces beyond the cutting line • Material support surface under the pusher with brush-mounted rollers, designed for sensitive surfaces • Machine table with air jets for sensitive surfaces • Automatic device for main saw blade monitoring consisting of a sensor measuring saw blade deflection and a system for monitoring the main spindle speed Software package: — QUICKOPTI for cut plan optimization directly on the machine — VERSION OSI PLUS INTERFACE — OPTIPLANNING OPTIMIZATION SOFTWARE, incl. hardware dongle, enabling management of up to 10 network users — OS LABELLING: Graphical editor on the machine control with part drawing; real-time label printing on the machine possible — COMMUNICATION BETWEEN STORE FEED SYSTEM AND SELCO • Industrial label printer at the machine STORAGE FEED SYSTEM RBO WINSTORE 2D STANDARD TRAVERSE 8,000 mm • Rotatable suction frame 0–180° with controlled axis • Panel alignment/squaring system with 3 photocells mounted on pneumatic cylinders • Panel weight detection via load cell mounted on suction frame in the separation area; checks if panel weight is within expected range for the panel type. If not, the panel is returned and the separation cycle restarts. • Roller conveyor for stack infeed and outfeed: 4,200 mm Software: — LINE SUPERVISOR with warehouse mapping and catalog, import of processing data from optimizer, bill of materials management, and system control.

Kondisi: bekas, Tahun pembuatan: 2020, tinggi total: 2.100 mm, panjang total: 2.000 mm, lebar total: 2.500 mm, Price: On request - Machine available from: 2025-12-15 - Year of manufacture: 2020 - Documentation available: Yes - CE marking present: Yes Dedpfxox Ad R Ns Ahusur - CE certificate available: No - Serial number: 1000040377 - Main motor power [kW]: 10 - Number of controlled axes [units]: 3 - Working area X [mm]: 975 - Working area Y [mm]: 1321 - Working area Z [mm]: 243 - Number of milling spindles [units]: 1 - Tool holder interface: ISO30 - Spindle diameter [mm]: 16 - Min. spindle speed [rpm]: 1000 - Max. spindle speed [rpm]: 18000 - Horizontal drilling machine: Yes - Horizontal drilling spindles [units]: 10 - Vertical drilling machine: Yes - Software: Biesse works - Saw unit present: Yes - Spindle speed control: Variable - Voltage [V]: 400 - Power consumption [A]: 18 - Fuse [A]: 32 - Power [kW]: 10.0 - Transport dimensions: 2000mm x 2500mm x 2100mm (L x W x H) - Transport packages [units]: 2 Financial Information VAT: The stated price is exclusive of VAT VAT/margin scheme: VAT deductible for businesses Delivery and trade-in possible at any time for all industrial sector equipment Glenn Smeets

Kondisi: bekas, Tahun pembuatan: 2005, Mesin Potong Tiga Sisi Müller Martini Esprit (1576) Dujdpfx Ahovxfkgouor Tahun Pembuatan: 2005 Deskripsi: - Monitor warna dengan layar sentuh - Pengaturan otomatis - Sabuk pengumpan dari kiri - Pemasukan dari kiri - Kaset pisau yang dapat diganti, jumlah: 3 - 11 - Total set pisau: 2 Spesifikasi teknis: - Kapasitas mekanis: hingga 2.000 siklus/jam - Ukuran maksimal tanpa potong: 391 x 320 mm - Ukuran minimal tanpa potong: 148 x 95 mm - Ukuran maksimal setelah potong: 311 x 305 mm - Ukuran minimal setelah potong: 142 x 75 mm - Ketebalan buku: 2 - 80 mm

Kondisi: sangat baik (bekas), Tahun pembuatan: 2017, Fungsionalitas: berfungsi sepenuhnya, Gergaji BIESSE Selco WN2 bekas - Kontrol OSI - Printer label - Tahun 2017 - Tersedia April - Tinggi potong 60mm Djdpfoyrr U Nex Ahujur - Kecepatan 1-80 m/menit - Ganti mata gergaji cepat - 4 meja bantalan udara

Kondisi: bekas, Tahun pembuatan: 2011, Base machine M800 X5 TV 1 WORKING FIELD X: 5,020mm Y: 1,830 mm Z: 675 mm Clearance height: 300 mm (from 50 mm pod height) MACHINE STRUCTURE The base structure is a monolithic design made of thick-walled steel. It is reinforced over the entire machine bed with welded-in parts, providing exceptional stability. The table design, featuring a large base, is the key to ensuring lasting precision and stability. The machine layout allows the operator to achieve optimal workflow despite minimal space requirements. The mobile gantry is built from a solid monoblock. It is positioned in the X direction on prismatic, ground guides using ball recirculation carriages. Mounted on this mobile unit carrier, the working unit is also installed on prismatic, ground guides and ball recirculation carriages. AXIS MOVEMENT All axis movements are performed on large cross-section prism linear guides with ball recirculation shoes offering extensive contact area, ensuring optimal sliding even at the highest speeds and accelerations. Precise and swift positioning of the moving gantry (X-axis) is achieved via helical rack and pinion drive. Large cross-section ball screws guarantee accurate positioning of the working unit along the mobile gantry (Y- and Z-axes). Perfect mechanical dynamics and maximum positioning accuracy are governed by premium quality drives and brushless motors. Maximum axis speeds: - X-axis = 90 m/min - Y-axis = 90 m/min - Z-axis = 30 m/min SAFETY DEVICE WITH BUMPER AND LIGHT CURTAIN 1 Bumpers with sensors are fitted around the mobile stand, and a light curtain system is installed in front of the machine. If the operator enters the active zone, the axis speed of the X-axis is reduced to a lower rate of 25 m/min without stopping the machine. This system allows workpieces to be loaded during pendulum operation without the disadvantageous access restrictions associated with safety mat systems. This prevents undesired interruptions of the machining cycle and allows greater freedom of movement around the work table. CE Certificate for the safety system 1 Safety enclosure 1 Safety enclosure lateral and rear Automatic centralized lubrication controlled via CNC 1 Lubrication of X, Y, and Z axes governed at regular intervals by CNC control, eliminating manual intervention at the machine. Central extraction nozzle 1 All individual extraction ports of the machining units are merged into one central port. Inside the port, various slide valves are controlled by the NC system, reducing the required extraction air volume. Dusdpsxy Tmnsfx Ahusr Chip conveyor 1 Maxi – 5 axis electrospindle 11 kW HSK-63 “Prisma K” 1 5-axis electrospindle with 11 kW power at 20,000 rpm in S1 (100% duty cycle) Speed: max. 20,000 rpm Rotation direction: left / right Liquid cooling Tool interface: HSK-63F 18 kW inverter for stepless, uniform power delivery Max. rotation B-axis = 200° (+/-100°) C-axis = 650° Thanks to non-orthogonal axes, complex horizontal positioning can be performed in compact working spaces. This allows machining of complex geometries without the risk of collision.

Tahun pembuatan: 2015, Kondisi: baru, We have a MATICA Espresso card printer available here. The new price is approximately €1,599. Now available for €999. Year of manufacture: 2015. The printer has always been in our showroom. We have only printed about 10 cards with it before deciding that this type of system is not suitable for our company. Therefore, a practically brand-new unit is now available. Single or dual-sided edge-to-edge printing Optional magnetic stripe and smart card encoder Ethernet and optional WiFi Prints up to 850 cards per hour 100-card feeder The Matica Espresso II is a compact and powerful desktop ID card printer, designed in Italy and engineered to deliver reliable German performance. The Espresso II offers excellent value and versatility, with remarkable print speed and outstanding print quality. Thanks to its robust, durable construction, the Espresso II fits perfectly into any office or card production environment, both in terms of appearance and performance. The Espresso II is a single-sided desktop ID card printer, suitable for projects that require printing only on one side of the card. The printer can be easily upgraded in the field to double the printing capacity by adding duplex functionality. Any Espresso II model can be upgraded to duplex at any time and location, without the need for additional hardware components. Contact and contactless smart card encoders are also available as field-upgradable features. LED status indicators on the front of the printer provide real-time monitoring of the card production process from a distance, while the blue LED light on the card hopper door helps you keep track of your card input status at all times. The optional single card manual insertion allows for individual card printing as needed. Each unit includes a rear output hopper to collect entire print runs, improving throughput during high-volume jobs. The standard setup with front input and output trays is practical in environments with limited space, such as desktops, cabinets, or under-counter installations. Each Espresso II printer may also be equipped with inline magnetic stripe, contact, or contactless smart card encoders, maximizing its functionality for many applications including access control, time & attendance, payment solutions, and more. All models in the series offer Ethernet connectivity and optional WiFi, ensuring convenient and trouble-free printing and encoding. You can configure your printer to perfectly meet your current requirements, as the Espresso II range covers various options. If your needs evolve in the future, upgrades can be performed by adding features to your existing setup. Duodpfx Aefnldqohuor This new printer range is ideal for a wide array of applications, including employee and membership ID badges, service and benefits cards, gift and loyalty cards, access control cards, student IDs, transit cards, and much more. The Espresso II is available in various configurations — modules, encoding options, colours, and more.

Kondisi: bekas, Painting line consisting of: Item 1 Belt Conveyor Infeed - Manufacturer: Venjakob - Working width: 1,300 mm - Length: 3,000 mm - Feed rate adjustable via handwheel ~ 2.5 – 7.5 m/min - Voltage, Hz: 400 / 50 - Colour: RAL 7035 Item 2 Cefla Dust Removal Machine - Manufacturer: Sorbini - Model: VS/32-E - Year of manufacture: 1998 - Working width: 1,300 mm - Working height: 900 mm ± 20 mm - Operator side: right - Roller transport - Air blast duct, top: 2 pcs - Air blast duct, bottom: 1 pc - Dust removal brush - With ionisation bar, top - With ionisation bar, bottom - With its own drive - With its own control system - Length: approx. 910 mm - Width: approx. 2,600 mm - Weight: 1,260 kg - Extraction outlet Ø 180 + 120 mm - Total connected load: 7.6 kW - Voltage, Hz: 400 / 50 Item 3 Venjakob VEN SPRAY Perfect Spray Machine - Manufacturer: Venjakob - Model: VEN SPRAY PERFECT - Year of manufacture: 2013 - Working width: 1,300 mm - Working height: 940 ± 20 mm - Operator side: left - IR preheating, number of emitters: 2 pcs - Twin gun drive - Dry exhaust extraction - Extraction outlet diameter: 600 mm - Exhaust air capacity: 10,000 m³/h - Belt conveyor system - Feed speed steplessly adjustable ~ 4-10 m/min - Belt cleaning system - Paint recovery via V-belt system - Gun control, EPS-CNC CNC 7000 - Colour management system for number of pumps: 3+1 pcs - Number of installed airless spray guns: 4 pcs - Quick-change system for spray units - Remote maintenance system - Dust protection hood at machine outfeed side - Exhaust air recirculation system - Exhaust fan control - Machine suitable for water-based paints - Machine suitable for solvent-based paints - Length: 5,509 mm - Width: 4,500 mm + 2,400 mm - Height: 3,380 mm + 510 mm - Total connected load: ~ 20 - 26 kW - Voltage, Hz: 400 / 50 - Colour: RAL 7035 - Kremlin AVX AirMix spray guns - Small volume container - Gun support arm system for quick removal of 4 AirMix spray guns from the spray booth, including quick couplings for pneumatic and material hoses. Dodpfev I Akvsx Ahujur Item 4 Venjakob Belt Conveyor - Manufacturer: Venjakob - Working width: 1,300 mm - Length: 2,000 mm - Feed rate adjustable via handwheel ~ 2.5 – 7.5 m/min - Voltage, Hz: 400 / 50 - Colour: RAL 7035 Item 5 Cefla High-Level Dryer - Manufacturer: Cefla - Model: VN 2000/5500/190.5/30 - Year of manufacture: 2003 - Working width: 1,300 mm - Number of pallets: 30 pcs - Pallet length: 5,600 mm - Usable pallet length: 5,300 mm - Payload per pallet: 300 kg - Max. part height: approx. 110 mm - Clear height between pallets: 120 mm - Dimension: centre of pallet to centre of pallet: 3,658 mm - Max. part length: approx. 5,200 mm - Number of controllable temperature zones: 2 pcs - Supply air capacity: 6,000 m³/h - Exhaust air capacity: 6,000 m³/h - Heating capacity max.: 175 kW - Max. drying temperature: approx. 55 - 60°C - With heat exchanger, hot water - Without hot water regulation valves - U-shaped pass-through configuration - Infeed side: right - Feed rate via frequency converter adjustable ~ 2-20 m/min - Suitable for water-based paints - Suitable for solvent-based paints - Length: 7,820 mm - Width: 6,130 mm - Height: 3,905 mm - Total connected load: ~ 23 kW - Voltage, Hz: 400 / 50 - Voltage fluctuation max. ± 5 % - Without control valves and water pumps Item 6 Belt Conveyor Infeed - Manufacturer: Cefla - Working width: 1,300 mm - Length: 2,000 mm - Feed rate adjustable via handwheel ~ 2.5 – 7.5 m/min - Voltage, Hz: 400 / 50 - Colour: RAL 7035