Pusat pemesinan

MASTERWOOD PROJECT 265

Kondisi: baik (bekas), Tahun pembuatan: 2012, Fungsionalitas: berfungsi sepenuhnya, CNC machining center with edge banding for shaped workpieces Working dimensions for Y1 axis: X-axis: 4,300 mm X-axis pendulum operation: 1,620 mm Y-axis: 1,320 mm Working dimensions for Y2 axis (edge processing): X-axis: 3,300 mm X-axis pendulum operation: 600 mm Y-axis: 1,240 mm Work table: 8 ATS workpiece supports, each with 3 vacuum cups 8 rear workpiece stops, retractable via program, integrated in each support 8 workpiece stops, 670 mm from rear, integrated in each support 2 + 2 lateral workpiece stops 4 removable center stops 6 pneumatic lifting rails, retractable via program, for positioning heavy workpieces Automatic positioning of workpiece supports and vacuum cups EPS (Electronic Positioning System) Automatic central lubrication Division of the vacuum system into 2 separate working zones in X direction Auxiliary vacuum system for clamping templates Dujdpfxexraimj Ahuer Chip conveyor integrated into the machine table Vacuum pump 90 m³/h Machining head equipment: Mounted on Z2 axis Drilling head BH 26 2L with: 16 vertical drilling spindles, each individually selectable 2+2 horizontal drilling spindles in X direction 2+2 horizontal drilling spindles in Y direction Grooving saw, 120 mm diameter fixed in X direction Grooving saw, 120 mm diameter fixed in Y direction Routing spindle 13.2 kW (11 kW S1-duty), HSK 63 F Mounted on Z1 axis Speed range 1,000–24,000 rpm Right and left rotation C-axis 360 degrees for aggregate adapters Cleaning nozzle for cleaning the milled edge prior to the edge banding operation Tool magazine for 16 tools Edge banding unit suitable for workpieces up to 60 mm thickness Edge banding unit CNC controlled, with 360° infinite rotation Glue application for hot melt adhesive Double pressure roller, exchangeable and disconnectable Heating lamp for pre-heating edge material End trimming unit for cutting edge material at an 8-degree angle to the workpiece edge using a circular saw blade Technical Data: Plastic edge thickness 0.4–3 mm (*) Solid edge thickness 0.4–2 mm (*) (Best results are achieved using wood edges with primer, 0.4–1.2 mm) Max. edge height 64 mm Panel thickness min. 14 mm, max. 60 mm Min. internal radius 18 mm, for edge thickness below 1 mm Min. internal radius 30 mm, with edge thickness 2 mm Minimum panel size for edging 300 x 300 mm Minimum internal cutout size for edging 350 mm, with plastic edge max. 1 mm thickness and max. panel thickness 18 mm Edge magazine for 2 rolls, positioned outside the machine, this solution restricts pendulum operation. Roll diameter of edge material: 800 mm Safety features: * Pressure-sensitive mats in front of the machine * Protective fence on the right with access door No tools included Control: PC control with BIESSE WORKS ADVANCED Restart after emergency stop BIESSE WORKS office version Aggregates: - Flush/Radius milling aggregate - Combination unit profile/flat scraper blade - Sawing aggregate

Tahun pembuatan: 2005, Kondisi: bekas, HIT mechanization for KVH and glulam production for components up to 600 mm width, 300 mm height, and 18 m length consisting of various parts available individually or as a complete package - Layer cross pusher Dodopiurmspfx Ahueur - Various cross conveyors - Workpiece roller conveyors - Heavy-duty roller conveyors - 5 lift tables, each with 2 cross conveyors mounted on traveling carriages - Stacking machine - Control cabinets - Roller tracks - Traveling truss crosscut saw with waste disposal system

Tahun pembuatan: 2022, Kondisi: baru, Mehrblattsäge für präzises Schneiden von Kleinteilen, insbesondere für die Herstellung von Bienenrahmen. - Antriebsleistung: 11 kW - Spindeldurchmesser: 70 mm Dedpfxoh Hxycj Ahusur - Anzahl der Sägeblätter: 10 - Sägeblattdurchmesser: 210 mm - Minimale Werkstücklänge: 100 mm - Maximale Werkstückhöhe: 40 mm - Vorschubgeschwindigkeit: 4–8 m/min - Schnellwechselsystem für Sägeblätter

Kondisi: baik (bekas), Tahun pembuatan: 2007, Fungsionalitas: berfungsi sepenuhnya, NC-controlled drilling and dowel insertion machine Manufacturer: Weeke Model: Optimat ABD 150 Year of manufacture: 2007 Workpiece dimensions Length: 20 - 1250 mm Width: 100 - 800 mm Thickness: 10 - 60 mm Active center stop: Max. length 600 mm Dedpfx Aexdl Rashusur Configuration: - Horizontal drilling unit with 3 individually selectable spindles, spindle spacing 32 mm - 1 dowel insertion unit (spaced 32 mm from the first drill spindle) - Glue nozzle with adjustable glue dosage - Glue flow monitoring - Mist oiler for glue nozzle - Standard dowel dimensions: 8x30 mm / 8x35 mm - Vibratory feeder for automatic dowel supply 1. BASE MACHINE - Robust steel frame construction - Axis movement in X, Y, and Z directions - Ball screw drive (Y and Z axes) and rack-and-pinion drive (X axis) - Digital AC servo motor - Support table with left and right side fences as well as rear fence rail - Pneumatically lowerable center stop, manually controlled via selector switch - 6 top hold-down cylinders, manually adjustable - Central lubrication Power control PC85T Modern control system based on Windows PC

Kondisi: baru, Tahun pembuatan: 2026, Variable adjustable paint rotary table • Numerous adjustment options for small and large solid workpieces • Sturdy construction • Can be operated by one person, rotatable with rigid outriggers and adjustable swivel arms • Height adjustable Technical data: Length: max. 1850 mm Width: max. 800 mm Height: 1000 – 1300 mm Load capacity: 300 kg Top quality Can be shipped by UPS by us. Duodsbzmagopfx Ahusr Requires assembly upon delivery. Location: ex stock Bitburg

Kondisi: bekas, Tahun pembuatan: 2011, Base machine M800 X5 TV 1 WORKING FIELD X: 5,020mm Y: 1,830 mm Z: 675 mm Clearance height: 300 mm (from 50 mm pod height) MACHINE STRUCTURE The base structure is a monolithic design made of thick-walled steel. It is reinforced over the entire machine bed with welded-in parts, providing exceptional stability. The table design, featuring a large base, is the key to ensuring lasting precision and stability. The machine layout allows the operator to achieve optimal workflow despite minimal space requirements. The mobile gantry is built from a solid monoblock. It is positioned in the X direction on prismatic, ground guides using ball recirculation carriages. Mounted on this mobile unit carrier, the working unit is also installed on prismatic, ground guides and ball recirculation carriages. Dedpfx Aexy Tmnohueur AXIS MOVEMENT All axis movements are performed on large cross-section prism linear guides with ball recirculation shoes offering extensive contact area, ensuring optimal sliding even at the highest speeds and accelerations. Precise and swift positioning of the moving gantry (X-axis) is achieved via helical rack and pinion drive. Large cross-section ball screws guarantee accurate positioning of the working unit along the mobile gantry (Y- and Z-axes). Perfect mechanical dynamics and maximum positioning accuracy are governed by premium quality drives and brushless motors. Maximum axis speeds: - X-axis = 90 m/min - Y-axis = 90 m/min - Z-axis = 30 m/min SAFETY DEVICE WITH BUMPER AND LIGHT CURTAIN 1 Bumpers with sensors are fitted around the mobile stand, and a light curtain system is installed in front of the machine. If the operator enters the active zone, the axis speed of the X-axis is reduced to a lower rate of 25 m/min without stopping the machine. This system allows workpieces to be loaded during pendulum operation without the disadvantageous access restrictions associated with safety mat systems. This prevents undesired interruptions of the machining cycle and allows greater freedom of movement around the work table. CE Certificate for the safety system 1 Safety enclosure 1 Safety enclosure lateral and rear Automatic centralized lubrication controlled via CNC 1 Lubrication of X, Y, and Z axes governed at regular intervals by CNC control, eliminating manual intervention at the machine. Central extraction nozzle 1 All individual extraction ports of the machining units are merged into one central port. Inside the port, various slide valves are controlled by the NC system, reducing the required extraction air volume. Chip conveyor 1 Maxi – 5 axis electrospindle 11 kW HSK-63 “Prisma K” 1 5-axis electrospindle with 11 kW power at 20,000 rpm in S1 (100% duty cycle) Speed: max. 20,000 rpm Rotation direction: left / right Liquid cooling Tool interface: HSK-63F 18 kW inverter for stepless, uniform power delivery Max. rotation B-axis = 200° (+/-100°) C-axis = 650° Thanks to non-orthogonal axes, complex horizontal positioning can be performed in compact working spaces. This allows machining of complex geometries without the risk of collision.

Kondisi: bekas, Tahun pembuatan: 2008, · Working area X-Y-Z: 3,660 x 1,550 x 130 mm · Travel range X-Y: 4,200 x 2,000 mm Description of units and accessories (standard configuration) The base structure is a monolithic construction made of thick-walled steel. It is reinforced across the entire machine bed with welded triangular plates, providing exceptional stability. The triangular shape used for the load-bearing elements, with a wide base, is the secret to ensuring long-term precision and stability. The machine layout allows the operator an optimal workflow even with minimal space requirements. Thus, the base structure provides the machining unit with a balanced and secure foundation with particularly good load distribution. The moving portal-type aggregate carrier is constructed as a solid monoblock. It is positioned in the X direction on prismatically ground guides and recirculating ball bearing carriages. The working unit is also mounted on prismatic, ground guides and recirculating ball carriages on this mobile aggregate carrier. Axis movement: The drive system for the Y and Z axes uses ground recirculating ball screws of the highest precision class. The drive in the X-axis is via a backlash-free, preloaded precision rack-and-pinion drive. This ensures balanced load distribution during positioning. Such characteristics are essential for smooth movement even during more complex operations. The movement of the individual axes is performed by brushless AC servomotors. These motors offer excellent positioning speed due to very low ramp-up times. Furthermore, the measuring systems are fully integrated into these motors, making this drive type completely maintenance-free. · Rapid traverse speed in X: 40 m/min · Rapid traverse speed in Y: 60 m/min · Rapid traverse speed in Z: 22.5 m/min Vacuum system (standard) · Vacuum pump: 100 cbm/h · Power: 2.5 kW · Max. vacuum (connection): 0.9 bar Control / Control cabinet · Office PC or industrial PC (see options) · Standard NC control: ESA-GV KVARA 6.0 · Cable remote control with main functions ELECTRICAL/ELECTRONIC CNC CONTROL Universal is equipped with a powerful NC control. The integrated office PC gives the NC control an unmatched level of familiarity: the software operates on Windows XP, allowing fast and easy programming that is also user-friendly for inexperienced operators. The system is open, permitting the connection of a CD-ROM drive, sound card, barcode reader, modem, printer, scanning systems, etc. Additionally, all common network systems and commercially available CAD programs can be installed. To save space, the control cabinet is placed beneath the machine table, while the operator works at a separate, movable terminal on castors. PROGRAMMING SYSTEM XILOG Software features: - Import of DXF files - Import of ASCII files - User interface in the operator’s native language (available in languages: I - GB - F - D - E) - Straight line and circular interpolation in three axes, linear in space, spiral in the selected plane - supported programming - Calculator for direct data transfer - Graphic and syntax help for drilling and milling operations - Parametric programming, enabling identical panel machining on various Dusdpevvi Rfsfx Ahuor

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2007, jarak pergerakan sumbu X: 4.600 mm, jarak lintasan sumbu Y: 1.935 mm, jarak gerak sumbu Z: 275 mm, jumlah sumbu: 5, This 5-axis Biesse Rover C9.50 was manufactured in 2007. It features a large working area (X = 4600 mm, Y = 1935 mm, Z = 275 mm), an automatic lubrication system, and a control unit for 5-axis interpolation. The machine is equipped with a vacuum system, a conveyor belt for chip removal, and liquid cooling. If you are looking for high-quality CNC machining capabilities, you should consider the Biesse Rover C9.50 machine, which we are offering for sale. Contact us for further information. Worktable and Clamping • 8 ATS panel holders (L = 1525 mm) and 24 sliding rails • Automatic positioning of the panel holders and sliding rails (EPS X-Y) • Pneumatic locking system, divided into 2 working zones in X • 8 rear reference stops, stroke 115 mm • 8 stops, stroke 140 mm, positioned at 1175 mm (L = 1280 / 1525 / 1800 mm) • 8 stops, stroke 140 mm, positioned at 770 mm (L = 1280 / 1525 / 1800 mm) • 4 side stops, stroke 140 mm (2 left + 2 right), pneumatic system • 4 removable central stops, stroke 140 mm (2 left + 2 right), pneumatic system • Sensor for detection of lowered stops • Pneumatic system for lifting rod supports • 6 lifting rod supports for easy loading (H = 74 mm modules) Vacuum • Vacuum system for a 250 m3/h pump • 250 m3/h rotary vane vacuum pump for standard vacuum system Processing Units and Configuration • Configuration C3-A1: Dedpfx Ahex D H Hceueur • Device for mounting chip deflectors with pneumatic or inductive sensors on a 5-axis processing unit • Flange for mounting units on a 5-axis interpolating machining head (units can only be used when the electric spindle is vertical) • Configuration C3-P2: • Additional Z-slide for rear processing units, controlled by an independent Z-axis • 16 vertical and 4 horizontal drilling spindles in Y-direction • Chain tool changer with 22 positions (180 mm center distance) • Iron gripper for chip deflector with pneumatic or inductive sensor, positioned in the chain tool changer • RH chip deflector with inductive sensor for standard electric spindle or 15 kW 5-axis electric spindle (requires device for chip deflector; requires flange for mounting units when using a 5-axis electric spindle; requires C-axis when using a standard electric spindle) Systems • Automatic lubrication system • Control unit with 5 interpolating axes Additional equipment • Additional overhauled 5-axis main spindle available • Conveyor belt for removing chips and scrap parts (chip conveyor) • Liquid cooling unit for liquid-cooled systems (can cool two electric spindles or one electric spindle plus a liquid-cooled drilling head) Note: The technical data and descriptions are taken from the original order confirmation and are for information purposes only; they are not binding.

Kondisi: bekas, Tahun pembuatan: 2016, Angle plate saw with automatic pre-tensioning and double pusher system for optimized cutting Dujdpfjuc Idxjx Ahujr Osi Plus numerical control Os Labeling labeling machine with onboard graphic labeling of the parts with illustrations Software for label print management Optiplanning cutting optimizer Cutting length: 4500 mm Cutting width: 2200 mm Blade protrusion: 95 mm Motorized rollers for side loading onto lift table 4500 x 2200 mm. Translation speed: 10.8 m/min (50 Hz) – 13.1 m/min (60 Hz) Automatic recognition of throwaway panel (sacrificial panel) based on thickness specified in the machine data Low stack stop Automatic side loading. Includes: safety grids, double photo cell, push-button control panel, electrical pre-installation for the two motorized pre-roller conveyors, and reinforcement with 4 rollers instead of fork passages in the pre-roller conveyor Intermediate roller conveyor Side feed pre-roller conveyor, dimensions 3800 x 2200 mm, with motorized rollers (height from floor: 325 mm) Gravity conveyor for feeding longitudinal offcuts to corner systems, 4500 mm (total length: 7295 mm) 3000 mm extension of the gravity conveyor for also conveying cross-cut offcuts Long chute for manual transfer of cross-cut section to central gravity conveyor Air cushion outfeed table, 2050 x 850 mm, fitted with front wheels Air generator for up to 6 air cushion levels MULTIPUSHER 2.4 system with automatic lubrication Additional mobile lateral aligner on the cross axis. The presence of this device allows the minimum panel length required for cross-cutting to be reduced from 1830 mm to 1220 mm. Automatic device for detecting saw spindle deflection in angular installations (longitudinal and transverse), consisting of a sensor that detects deflection directly on the saw shaft and a device that detects the blade revolutions directly at the chuck. Remote cycle start panel Automatic panel loading via rear lift table Automatic double aligner with pneumatic cylinders Additional mobile lateral aligner on the cross axis Main saw blade, max. diameter mm, 15 KW Scoring blade, max. diameter mm, 2.2 KW Saw carriage speed 1-140 m/min – brushless motors Longitudinal pusher carriage speed 90 m/min Cross pusher carriage speed 135 m/min Double pusher carriage with 6 grippers on the longitudinal carriage + 10 grippers on the cross carriage (8 fixed grippers + 2 on the cross carriage, multi-pusher system) Cutting system for thin panels

Kondisi: sangat baik (bekas), 5-axis (X-Y-Z-C+ 5°) CNC MACHINING CENTRE (POINT-TO-POINT) CNC machining centre for milling, drilling, cutting, and edge-banding Control system: ICOS CNC (IMAWOP software) Maximum working area (X - Y - Z) mm: 4000 x 1600 (2000) x 100 (Z travel 650 mm) Maximum working area for edge-banding (mm): 4000 x 1600 x 100 No. 8 clamping table with consoles (number of consoles) - 1400 mm LED setup aid for positioning of vacuum suction cups (Y-axis) No. 2 vacuum pumps (capacity: 140 m³/h) Safety housing for the machining head, safety tread mats Chip conveyor No. 1 vertical main spindle (milling unit) ROBOT HEAD HSK F63 (16 kW) Automatic tool changer (carousel type) with 18 tool positions No. 21 independent vertical drilling spindles (4 x 1.2 kW) No. 8 independent horizontal drilling spindles (4 in X + 4 in Y) Grooving saw unit (swivelling 90° in X-Y direction), diameter 200 mm Edge-banding unit (PUR glue + premelter 283.203) VT 100 / 100 WITH 45° SWIVELLING EDGE-BANDING UNIT No. 2 edge magazines for roll material Djdsw A Ruqopfx Ahusur OPTIONS: No. 1 adapter unit for flush or chamfer milling No. 1 adapter unit for flush milling and contour scraping