Pusat mesin bubut

MATRA MD40

Swing diameter over bed: 870 mm
Swing diameter over support: 520 mm
Turning length: 2,100 mm
Swing diameter in gap: 1,080 mm
Gap length: 430 mm
Number of spindle speeds: 24
Speed range: 8 - 1,000 rpm
Spindle bore: 103 mm
X-axis: x = 1,830 mm, x² = 160 mm
Y-axis: 415 mm
Longitudinal feeds: 104
Feed rate: 0.1 - 61.6 mm/rev
Feed rate: 0.0038 - 2 19/64 in/rev
Cross (facing) feeds: 104
Cross slide feed: 0.3 - 18.4 mm/rev
Cross (facing) feeds: 0.0012 - 47/64 in/rev
Thread pitches - number: 72
Threads - metric pitch: 0.5 - 240 mm
Threads - imperial: 60 - 1/8 inch
Threads - module: 0.125 - 60 mm
Cross slide travel: 450 mm
Top slide: 160 mm
Rapid traverse longitudinal: 5,140 mm/min
Rapid traverse cross: 2,570 mm/min
Tailstock cross offset from center: 10 mm
Quill: Morse 6
Quill stroke: 280 mm
Kodjcxxmijpfx Ac Hena
Frequency: 50 Hz
Operating voltage: 380 V
Control voltage: 220 V
Rated current (protection): 50 A
Rated current: 30 A
Total power requirement: 13 kW
Machine weight approx.: 4.8 t
Space required approx.: 4.1 x 1.5 x 1.9 m

Matra MD40 lead and feed screw lathe, equipped with:
- Original Forkardt F400 3-jaw chuck,
- Removable gap bridge,
- Original MiniWizard 2-axis digital readout with summed x & x² values,
- 3 glass linear scales,
- Multifix quick-change tool post,
- Feeds:
Axial: 0.24 - 32.87 mm/rev in 128 steps
Radial: 0.07 - 9.86 mm/rev in 128 steps
- Thread cutting:
Metric: 0.125 - 60 mm in 128 steps
Imperial: 128 - 15/16 DP in 128 steps
Metric: 0.5 - 240 mm in 128 steps
Imperial: 32 - 15/64” in 128 steps
- Swiveling spindle guard with safety switch,
- 2x emergency stop and
- Lockable main switch.

Iklan ini diterjemahkan secara otomatis. Kesalahan terjemahan mungkin terjadi.