Bor bangku

MAXION BT 20

Kondisi: sangat baik (bekas), Dijual paket genset: - ERCOLE MARELLI 1312T 12 silinder, twin-turbo Daya: 270 kVA; 216 kW - VM V12130I 12 silinder, twin-turbo Daya: 250 kVA; 200 kW Bsdpfxevq Ighe Abhswh -- VM V6130 6 silinder Daya: 100 kVA Tersedia opsi pembelian satu unit generator saja. Tag: genset, generator listrik, alternator, catu daya darurat, genset bensin, genset diesel, genset inverter, catu daya cadangan,

Kondisi: baik (bekas), Drilling capacity in steel (diameter): 25.0/30.0 mm Bwsdpfx Abeuhhzhehjh Spindle reach: 260 mm Quill stroke: 120 mm Spindle speed range: 80–1400 rpm Table clamping surface: 410 x 390 mm Total power requirement: 0.8/1.5 kW Machine weight approx.: 250 kg Space requirements approx.: 0.75 x 0.6 x 1.15 m

Kondisi: baru, HARGA: 2.000 EUR Bjdpfx Absx Dcd Dohjwh Mesin penggiling daging Pabrikan: Ital Form Seluruhnya terbuat dari baja tahan karat Dimensi: 980x605x900 mm Kapasitas: 320 kg/jam Tegangan: 220V / 50Hz Daya: 2,2 kW

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 1983, Pressing force: 2,000 kN Stroke rate: 60 strokes/min Adjustable stroke: 20 – 120 mm Shut height: 450 mm (at maximum stroke, slide up) Ram reinforcement: 100 mm Table size: 850 x 810 mm Passage opening: 00 x 0 mm Ram area: 750 x 810 mm Drive power: 22 kW Features: - 1 connecting rod - 6-fold ram guide - Hydraulic overload protection - Motor-driven oil circulation lubrication - Motor-driven slide adjustment - Manual stroke adjustment - Pneumatic counterbalance cylinder for ram weight compensation - Vibration-damping machine feet Bwedsgpxc Sepfx Abhsh

Kondisi: baru, High-performance thread tapping machine with leadscrew setup. Safety device against tool breakage. Programs for single-cycle and continuous operation, programmable thread depth, piece counter, LED lamp, and electronically controlled motor braking for single-cycle mode. Simple leadscrew change via quick-release coupling. Standard drilling capacity: 15 mm Thread cutting capacity: M3 - M10 Threads per hour: 1,000 Spindle: MK 2 Thread depth: 60 mm Drilling depth: 100 mm Throat: 250 mm Distance spindle/table: 185 to 541 mm Table size: 340 x 445 mm T-slot width: 12 mm Bjdpfxsfrlndo Abhjwh Column diameter: 90 mm Overall height: 1,050 mm Weight: 120 kg Special motor: 0.55 kW Mains connection: 400 V/50 Hz BT 18 GL M00033 4 spindle speeds: 320 rpm / 560 rpm / 1,000 rpm / 1,600 rpm Also available as pillar drilling machine BS 18 GL (M00034)! Digital speed display as standard. Column 200 mm longer: 14154

Tahun pembuatan: 1999, Kondisi: bekas, Tractive force – max. 6.0 t Bwoded Il A Nspfx Abhjh Ram stroke – max. 1,250 mm Space requirement approx. 1.20 x 1.20 x 3.25 m

Kondisi: bekas, Tahun pembuatan: 2015, nomor mesin/kendaraan: A2536805, Pressure: 40 t Stroke: 250 mm Retracting Force: 6.3 t Motor: 5.5 kW Max. Working Height: 450 mm Max. Approach Speed: 90 mm/sec Pressing Speed: 10 mm/sec Travel Distance (w): 250 mm Ram Plate: 500 x 200 mm Table Plate: 600 x 650 mm with T-slots Table Cut-out: 200 x 170 mm Table Height: 850 mm Oil Tank: 200 l Bjdpfx Aefxyhfebhjwh The described machine can be custom-built for you. Production time is approximately 5 months from receipt of payment. Approach: The press moves to the zero point at up to 90 mm/second. The positioning accuracy is 0.5 mm or better. Return: The press moves back to the end point at up to 90 mm/second. The accuracy here is 0.5 mm or better. The dwell time is adjustable from 0 to 10 seconds (in increments of 0.1 seconds). The press force can be adjusted between 10 and 40 tons (in bar). Further control details: The control system can be locked with a key switch. The key switch for the control system has the following functions: - Manual operation via two-hand control at 9.5 mm/sec in setup mode. (Stops at any desired position when the switches are released.) - Manual operation for bending tasks at up to 9.5 mm/sec using two-hand control and automatic return to top dead center when both two-hand buttons are released. - Automatic operation with secure tooling at up to 200 mm/sec. This function is labeled with a warning on the control panel. In automatic mode, the machine may only be used with fully enclosed, secure tooling—this information is clearly displayed on the front of the machine. In manual setup mode, the machine can also be operated via the two-hand control at a maximum of 9.5 mm/sec. Bending operations can also be performed in setup mode. A key selector switch is used to toggle between automatic and manual operation. Position adjustment for top and bottom dead center as well as switching position for speed reduction is managed via sensors that are adjustable on a chrome-plated rod. A clamping thread allows for fine sensor adjustment—accuracy is +/- 0.5 mm. The press can be equipped with a bending blade and, using the two-hand control, can perform sheet metal bending as well as punching, notching, and bending in automatic mode with secure tooling.

Kondisi: baru, EN: Precise, smooth-running standard drilling machine, high accuracy and quality. Drill table adjustable via rack and swivelable around the column. Full motor protection, star handle. Mains connection 230 V. Continuous drilling capacity in St 60: 15 mm Standard drilling capacity: 18 mm Infinitely variable spindle speeds: 200 - 4,000 rpm Spindle: MT 2 Drilling depth: 80 mm Throat: 180 mm Bwodpfxsda Nqxo Abhoh Distance spindle/table: up to 380 mm Table size: 250 x 220 mm Column diameter: 65 mm Total height: 910 mm Weight: 80 kg Frequency-controlled three-phase motor: 1.1 kW Equipment: - Forward/reverse selector switch for thread cutting - Full motor protection - Star handle In stock, immediately available

Kondisi: baru, Tahun pembuatan: 2025, PROFIL BENDING ATTACHMENT PB20 The ideal supplement for pipe bending on models 3000 and 6000 is the PB20 profile bending attachment. The device can be mounted quickly and easily onto the bending shaft without the need for tools. The workpiece is clamped onto the rotary table using the clamping device and pulled around the bending tool. With this system, the length of the legs to be bent can be precisely measured in conjunction with a length stop, ensuring repeatable accuracy during bending. TECHNICAL DATA: • Bending capacity (Steel 37): 100 x 10 mm, Ø 20 mm • Numerous standard tools available • Special tools possible • Sharp-edge tools with bending radii R2 or 5 mm • Round tools R 10 to 25 mm for bends up to max. 260° (optional) OUR SERVICE: • Welcome to test production in our in-house demo room • On-site consultation and informational meeting at your location • Consultation and processing of leasing/financing purchase via JUTEC • Trade-in of your current machine • Service contracts, on-site maintenance at your facility Bjdpfxonh R Eks Abhowh

Kondisi: baru, Pressure: 8.5 kN Stroke: 40 mm Throat depth: 95 mm Working height range: 95–240 mm Table size: 160 x 110 mm Spindle diameter: 25 mm Machine weight approx.: 27 kg Dimensions (L x W x H): 160 x 230 mm Direct Acting Pneumatic Presses These presses deliver full pressing force over the entire stroke length. They are primarily used when long-stroke parts require processing with constant force. Outstanding Features: • Long and precise spindle guidance for maximum dimensional accuracy • Hardened and ground piston rod for virtually unlimited service life • Double-acting cylinders with end-position cushioning on both sides • Double guide rings in the piston ensure smooth and consistent operation • Oil-resistant sealing elements Special Features of the PND Series: • Spindle secured against rotation • On the PND 85/S, spindle return is carried out via only one cylinder chamber—resulting in additional air savings • Fine adjustment of working height is easy, fast, and precise in two stages: – Basic setting by simply loosening the clamping screws on the stand – Precision fine-tuning via the stroke limitation ring on the piston rod Additional Advantage: Bwodsfv Awaspfx Abhoh Faster cycle times and air savings