Mesin penghancur - penghancur chip

Mayfran P14 00W7008.01

Tahun pembuatan: 2024, Kondisi: baru, Bending capacity: 6 mm Pre-bending: 5 mm Bending capacity: 6 mm Pre-bending: 5 mm Bending length: 2,030 mm Roll diameter: 170 mm Motor power: 4 kW Length: 3,600 mm Width: 1,020 mm Height: 1,120 mm Weight: 2,400 kg The machine can be inspected and demonstrated at any time by appointment at our demonstration site in Staufenberg. Further machines are available for demonstration at our facilities in Staufenberg. Further information is available upon request. Gedpfx Agsftdh Ioreuc

Kondisi: bekas, Tahun pembuatan: 2023, Generator Gas Nitrogen PSA NITRO Source N2 Parker N2-75 PALY VIG 1000 Liter Gjdpfxsx U Tgmj Agrjuc Tahun pembuatan: 2023 Unit tampak seperti baru. Hanya beroperasi dalam waktu singkat.

Kondisi: baru, Tahun pembuatan: 2024, Fungsionalitas: berfungsi sepenuhnya,

Tahun pembuatan: 2001, Kondisi: baik (bekas), 1 tungku hardening bekas Merek: Nabertherm, Tipe N 321 No. Seri: 160897, Tahun pembuatan: 2001, Temperatur maks.: 1.200°C, Daya terpasang: 400V, 47 kW Dimensi internal: 750 x 1100 x 400 mm Volume kerja: 320 liter Berat sekitar 1,6 ton Dimensi: Guedpfsxpf I Nex Agroc Panjang sekitar 2 m, lebar sekitar 1,5 m, tinggi sekitar 2 m,

Kondisi: sangat baik (bekas), Produsen: Strautmann Tipe: PP 1207 Plus Ukuran bal (PxLxT): 1200 x 1100 x 730 mm Berat bal: sekitar 400 - 500 kg Dimensi luar (PxLxT): 1850 x 1047 x 3079 mm Tinggi transportasi: 2500 mm Lubang pengisian: 1190 x 600 mm Tekanan pengepresan: 59 ton / 580 kN Kapasitas: 1 - 2 bal/jam Jumlah ikatan: 4 Berat mesin pres: 2300 kg Daya listrik: 400 V / 50 Hz Gsdpfev Aiymsx Agrjuc Daya terpasang: 4 kW Lokasi instalasi: atap dalam/luar ruangan Tingkat kebisingan: kurang dari 80 dB(A) Tahun produksi: 2003-2005 Saya juga memiliki baler Strautmann PP 1207 tahun 2009-2011 harga 5.500 euro Juga tersedia baler Strautmann PP 1208 tahun 2014-2015 Strautmann AutoLoadBaler tahun 2018 harga 7.500 euro

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 2007, jam operasional: 22.605 h, Fungsionalitas: berfungsi sepenuhnya, gaya penekanan: 100 t, lebar bukaan pengisian: 1.100 mm, panjang bukaan pengisian: 1.600 mm, lebar bal: 1.100 mm, tinggi bal: 1.100 mm, berat bal: 1.400 kg, berat keseluruhan: 36.000 kg, kapasitas tangki oli: 1.300 l, tahun perombakan terakhir: 2025, For sale is a refurbished baler with 100 t press force, large-format bales 1100 x 1100 mm, 75 kW drive power and 10-way cross-tying. Technical specifications baler: Manufacturer: Bollegraaf Model: HBC 110 K / 75 kW Year of manufacture: 2007 Main press force: 100 t Pre-press force: 50 t Operating hours: 22,605 h Feed opening dimensions: 1,600 x 1,100 mm Filling volume / press cycle: 3.15 m³ Theoretical cycle time: 19 seconds Bale size: 1,100 x 1,100 mm Drive power: 75 kW Connected load: 126 kW Total current consumption: 238 A Tying: 5-fold vertical, 5-fold horizontal, fully automatic Throughput at bulk density of: - 30 kg/m³: approx. 16 t/h - 50 kg/m³: approx. 25 t/h - 100 kg/m³: approx. 47 t/h Bale weight up to 1,400 kg, depending on material and bale length Hydraulic oil tank capacity: approx. 1,300 l PLC control: Telemecanique TSX Micro Operating panel: Schneider MAGELIS Touch Baler dimensions with hopper: 11,750 x 5,000 x 7,105 mm (L x W x H) Transport dimensions without baler: 11,765 x 2,500 x 3,450 mm (L x W x H) Baler weight: approx. 36 t Remarks: The baler has been partially overhauled, serviced in our workshop, and tested after completion of work before being stored. The machine is available at short notice and can be inspected at our warehouse by appointment. The following refurbishment works have been carried out: - Descaling and partial repainting of the baler. - Hydraulic oil tank drained, oil and air filters replaced. - New hydraulic oil filled. - All hydraulic hoses renewed. Gedpfx Aevf E Avsgrouc - Main hydraulic cylinder, two cylinders of the pre-press flap and the channel cylinder disassembled, dismantled, inspected, cylinder tubes honed, all seal kits replaced and final pressure tested. - Pre-press flap with bearings and bearing blocks disassembled. First and third circular arc segments removed and newly welded in. - Both shaft bearings for the pre-press flap renewed. - Upper material guide on the frame for the pre-press flap renewed. - Plunger disassembled, inspected and both front roller guides renewed. - Material guides and wear strips at the sides and on the bottom of the plunger cut out and newly welded in. - Horizontal and vertical needle and tying units disassembled, dismantled, inspected, plastic slide plates, bearings on twister shafts, and wire divert rollers with bearings in the needle heads renewed. - Both bronze slide rails left and right in the frame cover for the plunger renewed. - Both wire divert units left and right, including bale retaining clamps, fully renewed. - Wire infeed unit including hydraulic cylinder below the needle passes fully renewed. - Wire mark/scoring in the bottom and sidewalls of the channel welded up and smoothed. - General maintenance and service work carried out in line with manufacturer specifications. - Baler tested in manual and automatic mode, accepted and stored after completion of refurbishment works. We assume no liability for the technical details or possible errors.

Kondisi: baik (bekas), Tahun pembuatan: 1969, 1 x centrifuge Steimel S 3 Tahun pembuatan: 1969 dengan keranjang berbentuk kerucut dan penutup yang dapat dikunci. Mesin dalam kondisi teknis yang sempurna. Data teknis: Maks. kapasitas pengisian: 50 kg / 20 l Kecepatan putar: 1.000 rpm Mesin dapat dilihat dalam keadaan terhubung listrik. Gusdpfju Ttrvox Agrsc

Kondisi: baru, Tahun pembuatan: 2025, kecepatan spindel (maks.): 8.000 rpm, kecepatan spindel (min.): 8.000 rpm, 1 multispindle TORNOS SAS16-DC im Wiederaufbau Gujdpfxsugl S Io Agrsc - Neuer Schaltschrank SIEMENS oder FANUC, wählbar - Pick-up mit Bremse - Verstellbarer Anschlag mit Gegenlauf - 3 unabhängige Vorschubsysteme - Mehrere Werkzeughalter und Bohrvorrichtungen - Trommelstange mit Auflage - Optionen: automatischer Stangenlader IEMCA PRA, numerisches Gewindeschneiden, CNC-Kreuzschlitten u.v.m. Kontaktieren Sie uns.

Kondisi: baru, Tahun pembuatan: 2022, Shear; Suitable for use with: construction machinery Gujdepa Rpbjpfx Agroc

Tahun pembuatan: 2002, Kondisi: sangat baik (bekas), Product-contact parts are manufactured in stainless steel 1.4571, while the remainder of the used mixer dryer is made from 1.4301 stainless steel. Machine Description: Used Continuous Horizontal Mixer Dryer Manufacturer: AVA / Holland Merten GmbH Type: HTK 200 Gusdpjitcu Ejfx Agroc Year of Manufacture: 2002 Speed: 107 rpm Material: 1.4301 Drive Motor: 5.5 kW Version: EExdellCT4 Total Capacity: 235 liters Product-contact parts: Stainless steel 1.4571 Equipment: Double jacket, mechanical seal Dimensions: L 3400 x W 1100 x H 1500 mm Dead weight: approx. 1600 kg Technical documentation: Yes Note: Operating temperature 130°C, design temperature 200°C, internal mixer pressure -1/+3 bar, double jacket pressure +6 bar Accessories: Base frame Condition: Used Price: On request