Pusat permesinan - vertikal
MAZAK VTC-820/30

Name: MAZAK VTC-820/30
Brand: MAZAK
Availability: InStock

Tahun pembuatan

2023

Kondisi

Bekas

Lokasi

Bremen

Pusat permesinan - vertikal MAZAK VTC-820/30

Data mesin

Nama mesin:: Pusat permesinan - vertikal

Pabrikan:: MAZAK

Model:: VTC-820/30

Tahun pembuatan:: 2023

Kondisi:: bekas

Harga & Lokasi

Lokasi:: Bremen

Hubungi

Rincian penawaran

ID iklan:: A21546288

Nomor referensi:: 1023-1140781

Pembaruan:: terakhir pada 19.03.2026

Deskripsi

Travel in X-axis: 3000 mm
Travel in Y-axis: 820 mm
Travel in Z-axis: 720 mm
CNC control: Mazatrol Smooth G
Spindle taper: SK 40
Spindle speed range: 35 - 12,000 rpm
Spindle drive: 15 kW
Distance nose of spindle to table surface: 140 - 860 mm
Table load capacity: 2,500 kg
Rapid traverse (X/Y/Z): 50 m/min
Table width: 3,500 mm
Table length: 820 mm
Table height above floor: 870 mm
Number of T-slots: 7
T-slot width: 18 mm
T-slot spacing: 100 mm
Automatic tool changer: 48 positions
Tool change time: 4.7 sec
Max. tool diameter with 2 free spaces: 130 mm
Max. tool diameter when fully loaded: 80 mm
Max. tool weight: 8 kg
Max. tool length: 350 mm
Required air pressure: 5 - 9 bar
Air consumption: 260 l/min
Electrical specifications (voltage/frequency): 400 V / 50 Hz
Coolant tank: 500 l
Total power consumption: 46.7 kW
Machine weight approx.: 15.4 t
Installation space required approx.: 5.3 x 3.6 x 3.3 m

Standard machine incl. the following special equipment:
- Preparation for dual oil mist extraction
- Air cooling through the rotating milling spindle
- 48-tool magazine
- Electronic handwheel
- Three-color LED signal light
- Additional interior workspace lighting
- Air blast device at milling spindle
- High-pressure coolant supply through spindle (15 bar)
- Preparation for MAZAK Monitoring
- Chip conveyor, discharge left (Crowther)
- Manual grease gun
- Grease cartridge
- Mazak API
- Drilling cycle with controlled chip breaking
- Synchronous tapping
- Rapid traverse constant inclination angle

STANDARD EQUIPMENT
- Transformer for European market
- USB port (1 port)
- Mazak standard paint
- Workspace lighting

SAFETY FEATURES
- Operator door with interlock switch
- Workspace enclosure
- Splash guard covers workspace from the side
- Fully enclosed working area
- Protection against chips, coolant, and access to the workspace during automatic machining
Hsdpfoyvvluex Aansnl
- Safety devices according to global standards

COOLANT SUPPLY
- Coolant supply through spindle (pump pressure = 5 bar)
- Complete coolant system, including pumps, valves, piping, and nozzles for efficient production of high-quality components

FACTORY AUTOMATION
- Automatic ON/OFF and warm-up function
- Automatic warm-up activation via digital timer

MEASURING SYSTEM
- Tool length measurement and tool breakage detection

NUMERICAL CONTROL
- Horizontally adjustable NC operator panel
- Relocation Detector
- Mazatrol SmoothG control
- 19" LCD color screen (touch screen)
- Mazak tapping/drilling cycle Tornado (Mazatrol)
- EIA/ISO input function
- Tool path simulation in the background
- 3D coordinate transformation
- Form compensation for rotating axes
- Mazacc-2D software (contour compensation)
- Mazacc-3D software package
- Additional required: MAZACC-3D high-speed software package (NO456)
- High-smoothing control
- LAN interface
- SD memory card interface
- Smooth Standard Software for M/C
- NO443 B) MAZACC-2D software (workpiece form compensation)
- NO444 D) MAZACC-3D high-speed software package
- NO445 B) Form compensation for rotating axes
- NO497 D) High-precision control for finishing
- Seamless corner control
- Variable acceleration control
- Ultra high speed machining mode
- NO498 Rapid traverse path rounding function
- Absolute positioning system

- All dimensions, weight, and performance specifications are non-binding -

- Used ma...

Iklan ini diterjemahkan secara otomatis. Kesalahan terjemahan mungkin terjadi.

Penyedia

Terdaftar sejak: 2004

9 Iklan online

Hubungi

Kirim permintaan

Telepon & Faks

+49 421 4... iklan

+49 421 3... iklan

Faks:

Iklan-iklan ini juga mungkin menarik bagi Anda.

Iklan kecil

Pusat pemesinan vertikal Mazak VTC-820/30

Espelkamp

11.118 km

Pusat pemesinan vertikal
MazakVTC-820/30

Hubungi

Kondisi: bekas, Tahun pembuatan: 2018, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 3.000 mm, jarak lintasan sumbu Y: 820 mm, jarak gerak sumbu Z: 720 mm, model controller: Mazatrol SmoothG, lebar meja: 820 mm, panjang meja: 3.500 mm, berat keseluruhan: 16.500 kg, kecepatan spindel (maks.): 12.000 rpm, jam operasional spindle: 3.679 h, daya motor spindle: 22.000 W, jumlah slot dalam magazin alat: 48, tegangan masuk: 400 V, jenis arus masuk: AC (pendingin udara), Perlengkapan: konveyor serpihan, CNC vertical machining center MAZAK VTC-820/30 (Year of manufacture: 2018 / Commissioned in 2019) Hnsdpfxeyipy Rs Aanol The MAZAK VTC-820/30 is a powerful CNC vertical machining center designed for precise and efficient processing of large workpieces. With generous travels of 3,000 mm on the X-axis, 820 mm on the Y-axis, and 720 mm on the Z-axis, this machine is especially suitable for long and complex components in mechanical engineering, mold making, and general metalworking. The robust worktable, measuring approximately 3,500 × 820 mm, allows for the setup of large-scale workpieces. The high-performance main spindle, with speeds up to 12,000 rpm and a drive power of approximately 22 kW, ensures high cutting performance and precision. The spindle taper CAT 40 (ISO 40) provides broad tool compatibility. This machine features the advanced MAZATROL SmoothG control system, which offers intuitive operation, quick programming, and high process reliability. The 48-position tool changer enables flexible and efficient machining processes, even for complex manufacturing tasks. For optimal production conditions, the machining center is equipped with through-spindle coolant supply, a chip conveyor, and an automatic lubrication system. With a machine weight of approximately 16,500 kg, the VTC-820/30 offers outstanding stability and vibration damping, which positively impacts surface quality and dimensional accuracy. Overall, this is a modern and versatile vertical machining center that guarantees high precision, performance, and reliability for industrial manufacturing. With us, you are in the best hands—professional, reliable, and passionate about machinery! PS CNC Service Germany GmbH & Co. KG All information without guarantee.

Lihat detail

Iklan kecil

Pusat pemrosesan profil elumatec sbz 140

Balgoij

11.329 km

Pusat pemrosesan profil
elumatecsbz 140

€42.500

~~€47.500~~

harga tetap ditambah PPN

Hubungi

Kondisi: baik (bekas), Tahun pembuatan: 2009, Elumatec SBZ 140, Extended Length: 7.6 meters Approximate weight: 5,000 kg Automatic tool changer 2-section clamping system 2 pneumatic stops Safety enclosure Light curtains Automatic clamp detection Central lubrication Cooling spray system Chip trolley Conditioning unit Max. spindle speed: 24,000 rpm Tool holder: HSK-63F adapter, 8-position tool changer. Max. milling diameter: 80 mm Hodpfsx E Ahzex Aanonl Max. saw blade diameter: 200 mm Compressed air: 7 bar The SBZ 140 is a 4-axis profile machining center (axes: X, Y, Z + A). Designed for aluminum and thin-walled steel profiles. 4-axis CNC machining center (X/Y/Z + tilting/rotating A-axis) X-axis: approx. 7,900 mm travel Y-axis: approx. 850 mm travel Z-axis: approx. 650 mm travel A-axis (rotation/tilting): Freely programmable angle, –90° to +90° Axis feed rate: X-axis up to approx. 65 m/min, Y and Z axes up to approx. 60 m/min (depending on configuration) Control: 4-axis CNC system, with PC control, color display, USB & network connection. Software: eluCam. Automatic material clamps, automatic positioning via dowel pins. Pendulum/shuttle operation (two work zones), increasing production throughput. Applications include milling, drilling, tapping, sawing, and comprehensive profile processing—all with profiles clamped in a stationary position. Please note: The information on this page has been gathered and compiled to the best of our knowledge, but accuracy cannot be guaranteed. Accordingly, this does not constitute a representation or contract, and we advise you to verify all relevant details. Financial information VAT/Margin: VAT: The listed price is excluding VAT (VAT deductible for businesses).

Lihat detail

Klik keluar

Wolverhampton

11.813 km

Pusat pemesinan vertikal
MazakVTC820/30

Masih 3 hari

Detail

Kondisi: bekas, Tahun pembuatan: 2010, Mazak VTC820/30 Pusat Pemesinan 3 Sumbu. No Seri: 200131 (2010) dengan Kontrol Mazatrol Matrix, Perjalanan X/Y/Z: 3000/800/720mm, Meja: 3500mm x 820mm, Kecepatan Spindel: 18.000 rpm, Taper Spindel: BT40, Kepala Putar Sumbu B +/- 110°, Partisi Tengah yang Dapat Dilepas. Negara Asal: Britania Raya Hsdpey Ib Ryefx Aanenl Catatan: Tidak ada fasilitas pemuatan di lokasi, pembongkaran dan pemuatan menjadi tanggung jawab pembeli. Lokasi: Item berada di Birmingham & Wolverhampton, Inggris. Catatan: Tidak ada fasilitas pemuatan di lokasi, pembongkaran dan pemuatan menjadi tanggung jawab pembeli.

Lihat detail

Iklan kecil

Pusat pemesinan horizontal dengan paletisasi DOOSAN NHM8000

Montpellier

11.680 km

Pusat pemesinan horizontal dengan paletisasi
DOOSANNHM8000

€160.000

~~€180.000~~

harga tetap ditambah PPN

Hubungi

Kondisi: baik (bekas), Tahun pembuatan: 2014, jam operasional: 8.035 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: MH0017-000100, jarak pergerakan sumbu X: 1.400 mm, jarak lintasan sumbu Y: 1.050 mm, jarak gerak sumbu Z: 1.200 mm, produsen pengendali: fanuc, model controller: 31i, jam operasional spindle: 6.000 h, Horizontal machining center Doosan NHP 8000, new, equipped with Fanuc 31i control cabinet Included equipment and options: - 800x800 mm pallet centering device - Hand-held coolant gun - High-pressure coolant system, 70 bar, 7.5 kW, with cyclone filtration Hjdpfewu Rgqex Aanenl - Automatic tool changer - Tool load management - Chip conveyor - Renishaw RMP60 workpiece probe - TS27R tool probe

Lihat detail

Iklan kecil

Willroth

11.237 km

Mesin bubut CNC
OkumaLT 200-M

Hubungi

Iklan kecil

Tesa (Brown & Sharpe) XCEL Brown&Sharpe (Hexagon) XCEL 9129

Wolkersdorf im Weinviertel

10.632 km

Tesa (Brown & Sharpe) XCEL
Brown&Sharpe (Hexagon)XCEL 9129

€38.000

EXW VB ditambah PPN

Hubungi

Kondisi: diremajakan ulang (bekas), Measuring ranges X/Y/Z = 900 x 1200 x 850 mm Measuring uncertainty 4.0 + 4.5L/1000 (in original condition; currently significantly improved after modernization) Completely modernized in 2018 with Pantec Controller Eagle Pro Probe system: Renishaw PH10MQ with SP25M Entirely new Inca Premium software (alternative software available on request) HP Workstation PC Optional: Hnodpfx Aaedpak Rjnol Laser scanner (e.g. Kreon) Probe changer Rotary table, etc.

Lihat detail

Iklan kecil

Pusat pemesinan CNC - 5 sumbu DMG MORI DMF 360-11

Halberstadt

10.969 km

Pusat pemesinan CNC - 5 sumbu
DMG MORIDMF 360-11

Hubungi

Iklan kecil

Pusat penggilingan balik CNC Okuma MULTUS B400-C

Lontzen

11.340 km

Pusat penggilingan balik CNC
OkumaMULTUS B400-C

Hubungi

Kondisi: baik (bekas), Tahun pembuatan: 2008, - Maximum turning diameter over bed: 700 mm - Turning length: 1,500 mm Main spindle: - Speed range: 2,800 rpm - Enlarged main spindle: Ø 150 mm, bore: 110 mm - Drive power: 30 kW, 900 Nm - Spindle nose: Size 11 Total power requirement: 59.5 kVA Machine weight approx.: 14.5 t Space requirement approx.: 6.4 x 3.0 x 2.6 m Hodsxmirgepfx Aanonl EQUIPMENT: - 3-jaw chuck, SMW KNCS-N 400 K11 - Tailstock - Programmable CNC steady rest slide (cross slide NOT retractable) - SMW-AUTOBLOK SLU-3, self-centering steady rest, clamping range Ø 12 - 152 mm - Full-stroke cylinder for partial hollow clamping, maximum draw tube bore Ø 100 mm - In-process measuring system Renishaw for X/Y/C axis - Programmable CNC tailstock on W axis - Drilling/milling spindle and C-axis 0.001° - Tool changer: 80 positions Tool system: HSK-A63 - Y-axis with travel +115/-115 = 230 mm - B-axis 225°, positioning in 0.001° - ICS / Internal coolant supply for driven tools - Synchronized thread cutting with driven tools - Software for the use of multifunctional tools, e.g. special tool with radially arranged indexable inserts, which can be positioned in the drilling/milling spindle at 60°, 90°, 120° and 180° - Hobbing software for straight and helical gearing with speed synchronization of main and milling spindles - Electrostatic extraction unit - Chip conveyor - Documentation - CE marking

Lihat detail

Iklan kecil

Hid. tekan rem AMADA PROMECAM HFBO 220/4 4100 x 220 to

Kreuztal

11.194 km

Hid. tekan rem
AMADA PROMECAMHFBO 220/4 4100 x 220 to

Hubungi

Kondisi: sangat baik (bekas), Data teknis: Panjang kerja: 4100 mm Jarak antara tiang: 3650 mm Tekanan tekan: 220 ton Kontrol CNC: OPERATOR OPII grafik Ukuran layar berwarna: 14" Sumbu yang dikontrol: Y1/Y2; X1/X2; R1/R2; Z1/Z2 Hsdpfx Aasykkrksnonl Batang penahan belakang yang dapat disesuaikan secara motoris Kedalaman tenggorokan: 300 mm Langkah: 180 mm Pembombaan otomatis Daya motor: 17 kW Dimensi (Panjang x Lebar x Tinggi): kurang lebih 4800 x 2300 x 2900 mm Berat: sekitar 17 ton Aksesori: Alat AMADA baru Penjual tidak bertanggung jawab atas kesalahan penulisan atau transmisi data. Kondisi mesin dari segi tampilan, teknis, dan keausan sesuai dengan usianya; mesin bekas dijual tanpa jaminan apapun.

Lihat detail

Iklan kecil

Zuchwil

11.313 km

Mesin bubut tipe Swiss
TraubTNL 18-7B

Hubungi

Kondisi: sangat baik (bekas), Tahun pembuatan: 2013, Traub TNL 18-7B CNC Turning Automatic Base Machine: Dimensions: 2441 x 1396 mm Weight: 3800 kg Spindle Height Above Floor: 3800 mm Connected Load: 24 kW Main Spindle Max. Bar Capacity: 18 mm Max. Speed: 12,000 rpm Corner Speed: 5,000 rpm Travel Z: 205 mm Rapid Traverse: 40 m/min Positioning Accuracy Z: 0.001 mm Feed Force: 3000 N Spindle Nose / Short Taper: Traub short taper mount Max. Clamping Force: 1400 daN Max. Clamping Pressure: 40 bar Min. Clamping Pressure: 7.5 bar Piston Area: 40 cm² Total Cylinder Stroke: 5 mm Clamping Tube Thread: M25 x 1 Counter Spindle Hnedpfxjwg Takj Aanol Workpiece Diameter: 21 mm Clamping Depth (Workpiece): 180 mm Max. Speed: 12,000 rpm Strokes: X: 120 mm | Y: -20/+40 mm | Z: 250 mm Rapid Traverse: X: 20 m/min | Y: 20 m/min | Z: 40 m/min Max. Clamping Pressure: 30 bar Min. Clamping Pressure: 10 bar Upper Tool Turret with B-Axis Number of Stations: 8 Shank Cross-section (Turning Tool): 16 x 16 mm Travel: X: 120 mm | Y: -25/+40 mm | Z: 250 mm Rapid Traverse: X: 20 m/min | Y: 20 m/min | Z: 40 m/min Tool-to-Tool Time: 0.5 sec Positioning Accuracy: X: 0.0005 mm | Y: 0.0005 mm | Z: 0.001 mm Lower Tool Turret Number of Stations: 7 + counter spindle Shank Cross-section (Turning Tool): 16 x 16 mm Travel: X: 120 mm | Y: -20/+40 mm | Z: 250 mm Rapid Traverse: X: 20 m/min | Y: 20 m/min | Z: 40 m/min Tool-to-Tool Time: 0.5 sec Positioning Accuracy: X: 0.0005 mm | Y: 0.0005 mm | Z: 0.001 mm Driven Tool System for Upper Tool Turret Number of Driven Stations: max. 8 Drive Power: 2 kW Max. Speed: 12,000 rpm Torque: 3.9 Nm Driven Tool System for Lower Tool Turret Number of Driven Stations: 7 + counter spindle Drive Power: 3.4 kW Max. Speed: 12,000 rpm Torque: 7.3 Nm Driven Tool System for Rear Unit Number of Stations: 7 Number of Powered Stations: max. 3 Pitch: 46 mm Drive Power: 2 kW Max. Speed: 7,500 rpm Torque: 4.7 Nm Drive Power: 2 kW Max. Speed: 4,000 rpm Torque: 11.8 Nm SCOPE OF SUPPLY Includes (not limited to): - Traub CNC Lathe - Tool holders, driven and static - High-pressure and band filtration system - Oil mist separator - Fire extinguishing system - Chip conveyor - Bar feeder - Operating documentation Exact scope of supply as per photo series. No guarantee for the accuracy, completeness or currency of the information provided.

Lihat detail

Beriklan di sini