Beli Chiron Fz 16 bekas (105)

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2003, Segera tersedia dari pusat pelatihan: Pusat Pemesinan CNC Chiron Tipe FZ 12 W Magnum High Speed Tahun pembuatan 2003 Jam operasi sangat sedikit Kontrol Sinumerik 840 D – S Meja 850 x 350 mm Lintasan sumbu X/Y/Z 550/300/425 mm SK 40 Itodoyvzdpepfx Ag Rjd Penukar alat 20 posisi Kecepatan spindle 60 – 10.500 rpm Kapasitas beban meja 150 kg Spindle 18 kW Konveyor serpihan Berat 4 ton Harga Euro 6.000.—ditambah PPN ex lokasi

Kondisi: Pembawa suku cadang rusak (bekas), Tahun pembuatan: 1996, Fungsionalitas: fungsi terbatas, jarak pergerakan sumbu X: 2.800 mm, jarak lintasan sumbu Y: 520 mm, jarak gerak sumbu Z: 630 mm, gerak cepat sumbu X: 40 m/menit, pergeseran cepat sumbu Y: 30 m/menit, pergerakan cepat sumbu Z: 30 m/menit, panjang pemakanan sumbu X: 2.700 mm, panjang umpan sumbu Y: 520 mm, panjang umpan sumbu Z: 630 mm, kecepatan pemakanan sumbu X: 40 m/menit, laju pemakanan gandar Y: 30 m/menit, laju pemakanan sumbu Z: 30 m/menit, produsen pengendali: Siemens, model controller: Sinumerik 810, tinggi total: 2.800 mm, panjang total: 4.450 mm, lebar total: 2.850 mm, lebar meja: 520 mm, panjang meja: 1.200 mm, kecepatan rotasi (maks.): 10.500 rpm, berat keseluruhan: 12.100 kg, kecepatan spindel (maks.): 10.500 rpm, daya motor spindle: 36.000 W, hidung spindel: SK50, jumlah spindel: 1, jumlah slot dalam magazin alat: 40, Perlengkapan: dokumentasi / manual, konveyor serpihan, chiron-fz28l_en Itsdpfx Ageyvg Aks Rjd

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2007, jam operasional: 22.500 h, jarak pergerakan sumbu X: 450 mm, jarak lintasan sumbu Y: 270 mm, jarak gerak sumbu Z: 310 mm, produsen pengendali: SIEMENS, model controller: 840D, kecepatan spindel (maks.): 15.000 rpm, jumlah sumbu: 3, This 5-axis CHIRON FZ 08K S Magnum SK was manufactured in 2007. It is equipped with a Siemens 840D control unit and features impressive travel ranges of 450 mm on the X-axis, 270 mm on the Y-axis, and 310 mm on the Z-axis. The machine offers a 40-position tool changer and a high-pressure coolant system. If you are seeking top-quality machining capabilities, consider the CHIRON FZ 08K S Magnum SK vertical machining center we have available for sale. Please contact us for further details. • Overhauled: Factory overhauled and technically updated by Chiron (CMS) in 2017 • Last spindle replacement: September 2025 • Last maintenance: Comprehensive annual service (4,000 h) in October 2025 • NC swivel head range: -20° / +115° • Rapid traverse X/Y/Z: 75 m/min • Acceleration X/Y/Z: 1g / 1.5g / 2g • Tool changer: 40 positions, HSK-A40 Ijdsypb Tpepfx Ag Rotd • Chip-to-chip time: 2.6 s (vertical) • Rotary table: AWU 160 with D105 mm positioning axis • Operating hours: approx. 22,500 h Additional equipment • Clamping: Hainbuch Spanntop D100 collet chuck • Bar feeder: IRCO SiMag 100.1-3000 for round and profile material • High-pressure coolant: 70 bar with Vario valve • Coolant filtration: Knoll VRF, 400-liter vacuum rotary filter • Chip conveyor: scraper belt, 1,050 mm discharge height • Measuring/Monitoring: Renishaw TS27R 3D probing system; tool life monitoring; tool breakage detection • Collision monitoring: Brankamp Marposs CMS 100 • Guide channel sets: Breuning IRCO sets included (by arrangement) • Collets: Hainbuch collets included (by arrangement) • Tool holders: approx. 500 HSK-A40 units • Spare parts: Supplied for this machine type • Operating materials: Specific consumables/materials included

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2012, jam operasional: 29.801 h, jarak pergerakan sumbu X: 729 mm, jarak lintasan sumbu Y: 401 mm, jarak gerak sumbu Z: 361 mm, produsen pengendali: FANUC, model controller: Series 31i, kecepatan spindel (maks.): 12.000 rpm, jumlah sumbu: 4, Pusat pemesinan vertikal 4-sumbu CHIRON FZ 15 KWM HS ini diproduksi pada tahun 2012. Jika Anda mencari kemampuan milling berkualitas tinggi, Anda harus mempertimbangkan mesin CHIRON FZ 15 KWM HS yang kami tawarkan untuk dijual. Silakan hubungi kami untuk informasi lebih lanjut. Ijdpfx Agsx D Nmls Rjtd Keunggulan mesin Keunggulan teknis mesin • Ketersediaan: tersedia mulai 1/7/25 • Tegangan operasi: 400 V • Tegangan kontrol: 230/23 V • Material yang diproses pada mesin: aluminium • Tipe kerucut: HSK-63 Informasi tambahan Mesin masih terhubung listrik.

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2012, jarak pergerakan sumbu X: 550 mm, jarak lintasan sumbu Y: 320 mm, jarak gerak sumbu Z: 360 mm, beban meja: 500 kg, kecepatan spindel (maks.): 12.000 rpm, berat alat: 5.000 g, jumlah sumbu: 3, This 3-axis vertical machining center CHIRON FZ 12 KW was manufactured in 2012. It is equipped with a high-speed spindle offering a maximum speed of 12,000 rpm, and rapid traverse speed of up to 60 m/min on the Z-axis. The machine features an automatic tool changer with 24 positions and can handle a table load of up to 500 kg. Ideally suited for precision machining tasks. Please contact us for more information about this machine. Machine Advantages Technical Machine Advantages • Controlled axes: 6 axes • Reach: 704 mm • Acceleration/deceleration: 0 to 12,000 rpm in 0.6 seconds • Clamping surface: 820 x 440 mm² • Drilling capacity in St 60: Ø 16 mm • Tapping: M 16 • Milling capacity in St 60: 80 cm³/min • Acceleration: X & Y axis 0.7 g, Z axis 1.0 g Additional Information Itodex Nr I Eopfx Ag Rsd Movement Range and speed of axis movement: J1: 340°/360° (option) at 350°/s J2: 200° at 350°/s J3: 388° at 400°/s J4: 380° at 450°/s J5: 240° at 450°/s J6: 720° at 720°/s Permissible load moment: J4 & J5: 11.9 Nm J6: 6.7 Nm Repeatability: +/- 0.02 mm Maximum speed J1: 195°/s J2: 175°/s J3: 180°/s J4 and J5: 400°/s J6: 600°/s Permissible load moment J4 and J5: 7.7 Nm J6: 9.8 Nm Tools Automatic tool changer: Tool pockets: 24 Tool change time: approx. 0.9 s Chip-to-chip time: approx. 2.4 s Workpieces are fed automatically through a loading system and are sequentially loaded into the Chiron machining centers by two Fanuc industrial robots. After completion of the machining processes, they are removed. The robots then transfer the components to a transfer system, which conveys them to a subsequent cleaning facility. The integrated wash line ensures reliable cleaning of the components according to defined cleanliness standards. After the washing process, two synchronously operating Fanuc robots pick up the cleaned parts in the rear section of the plant. Depending on process requirements, these are either automatically palletized or further processed in a subsequent step, for example by riveting. The entire system operates fully automatically.

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2014, jam operasional: 24.209 h, jarak pergerakan sumbu X: 730 mm, jarak lintasan sumbu Y: 400 mm, jarak gerak sumbu Z: 360 mm, produsen pengendali: FANUC, kecepatan spindel (maks.): 12.000 rpm, daya motor spindle: 7.500 W, jumlah sumbu: 4, Pusat Pemesinan Vertikal CHIRON FZ 15 W Magnum HS 3-sumbu ini diproduksi pada tahun 2014. Ideal untuk pemesinan presisi, menawarkan konstruksi kokoh dan keandalan. Pertimbangkan kesempatan untuk membeli pusat pemesinan vertikal CHIRON FZ 15 W Magnum HS ini. Hubungi kami untuk informasi lebih lanjut. Keunggulan Mesin Keunggulan Teknis Mesin • Jumlah alat per spindle: 48 • Holder alat: HSK-A 63 • Torsi maksimum spindle utama: 95 Nm Itodpfx Ajx D Nl Ueg Rod Informasi tambahan Mesin masih terpasang listrik

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1995, jarak pergerakan sumbu X: 550 mm, jarak lintasan sumbu Y: 300 mm, produsen pengendali: SIEMENS, model controller: Sinumerik 810D, kecepatan spindel (maks.): 10.000 rpm, daya motor spindle: 95.000 W, jumlah sumbu: 2, el Itodpfx Asx D Ryaog Rod

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1993, produsen pengendali: SIEMENS, model controller: Sinumerik, CHIRON FZ 18 W 4-sumbu ini diproduksi pada tahun 1993. Mesin ini dilengkapi dengan dua sumbu ke-4 dan sistem kontrol SIEMENS SINUMERIK yang meningkatkan presisi dan efisiensinya. Konveyor serbuk tambahan berkontribusi pada lingkungan kerja yang bersih. Manfaatkan kesempatan ini untuk membeli pusat pemesinan vertikal CHIRON FZ 18 W ini. Hubungi kami untuk informasi lebih lanjut mengenai mesin ini. Ijdpeyaadujfx Ag Rstd Keunggulan Mesin Keunggulan Teknis Mesin • Sumbu: 4 dengan 2x sumbu ke-4

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2007, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 450 mm, jarak lintasan sumbu Y: 270 mm, jarak gerak sumbu Z: 310 mm, gerak cepat sumbu X: 75 m/menit, pergeseran cepat sumbu Y: 75 m/menit, pergerakan cepat sumbu Z: 75 m/menit, daya nominal (semu): 17 kVA, tinggi total: 2.300 mm, panjang total: 1.500 mm, lebar total: 2.600 mm, berat keseluruhan: 3.400 kg, kecepatan spindel (maks.): 30.000 rpm, hidung spindel: HSK40, jumlah slot dalam magazin alat: 40, tegangan masuk: 400 V, jenis arus masuk: tiga fasa, Perlengkapan: dokumentasi / manual, de Ijdpfoyq Nyyox Ag Rstd

Tahun pembuatan: 2021, jam operasional: 9.159 h, Kondisi: bekas, nomor mesin/kendaraan: 374-19, dokumentasi terlampir sebagai PDF Iedoyn Ni Nspfx Ag Rjtd

Tahun pembuatan: 2021, jam operasional: 16.807 h, Kondisi: bekas, nomor mesin/kendaraan: 374-20, dokumentasi terlampir sebagai PDF Isdpfx Agoyn Nkao Rstd

Kondisi: bekas, Tahun pembuatan: 2001, f551a5be Ijdpfxoynnu Do Ag Rotd

Kondisi: sangat baik (bekas), Tahun pembuatan: 2020, de Itjdpfx Asyt I Uheg Red

Kondisi: bekas, Machine has a fault in the main spindle. Iedpsquhbgjfx Ag Retd CNC Vertical Machining Centre CHIRON Type FZ 22 L high speed Machining centre with CNC control FANUC Series 21-M Serial No. 179-98 Year of manufacture: 1999 Travel distances X: 2000 mm, Y: 520 mm, Z: 630 mm Table size 2700 x 570 mm Table load capacity 525 kg (per meter) Tool holder SK 40 (DIN 69871) Drilling capacity 35 mm Tapping capacity M27 Tool diameter 75 mm Diameter with free adjacent stations 105 mm Tool change time tool-to-tool 2.0 sec. Tool change time chip-to-chip 4.8 sec. Distance spindle nose – table 190 to 820 mm Spindle speed max. 10,500 rpm Main spindle drive max. 18.5 kW Power supply 400 Volt, 50 Hz, 32 kVA - Pendulum machining via 2 work areas (partition wall missing) - CNC control FANUC Series 21-M - 40-position tool changer - Through spindle coolant (IKZ) - Splash guard cabin with sliding door - Indirect path measurement system - Coolant unit with chip conveyor adjacent - Electronic handwheel Transport dimensions of the basic machine L x W x H 4600 x 2470 x 2950 mm Machine weight approx. 7.5 tons Transport dimensions for the truck L x W x H 12000 x 2470 x 2950 mm Transport weight on the truck approx. 10 tons Weight 7.2 tons Good condition – machine has a fault in the main spindle.

Kondisi: sangat baik (bekas), Siemens 840 D, 48 tempat alat HSK-A 50, kecepatan spindle 15.000 rpm, perangkat pergantian benda kerja, sistem pendingin Knoll dengan pendinginan internal (IKZ), Thermodrive, alas pengecoran mineral, pintu pemuatan otomatis, pelumasan sentral, sistem ekstraksi tambahan untuk serpihan plastik. Itodpfx Agjx D Up So Rjd

Kondisi: baik (bekas), Tahun pembuatan: 2014, Suku cadang yang ditunjukkan dengan tangan tidak termasuk. Data teknis ditampilkan pada gambar. Itjdpfx Agjyk E Dbj Red

Kondisi: baik (bekas), Tahun pembuatan: 2007, Fungsionalitas: berfungsi sepenuhnya, Vertical CNC Machining Center Chiron FZ OSK S Magnum SK with NC swivel head, rotary table package, bar feeder, and discharge unit Year of manufacture: 2007, Factory overhaul: 2017 Operating hours: approx. 22,500 h Technical data: Siemens 840D (PCU 20 / NCU 572.4) NC swivel head, swivel range -20° / +115° Water-cooled motor spindle D, 15,000 rpm Travel paths X 450 mm / Y 270 mm / Z 310 mm Rapid traverse in X / Y / Z: 75 m/min / Acceleration X 1g / Y 1.5g / Z 2g 40 tool positions HSK-A 40, chip-to-chip time 2.6 sec. vertical (to DIN) Additional equipment: Prepared for bar machining Rotary table package AWU 160 with D105 mm (indexing axis) Hainbuch Spanntop D100 collet chuck, 6th side additional device Part handling and discharge system for finished parts Bar feeder IRCO SiMag 100.1-3000 (round and profile material) Coolant gun, machine prep for high-pressure internal coolant (IKZ) 70 bar (variable valve), fixture flushing Scraper belt chip conveyor with discharge height 1050 mm Vacuum rotary filter VRF 400 l (KNOLL MAHLE twin-changeable filter) Electrical cabinet cooler, signal tower Isdeypbmcepfx Ag Retd Tool life monitoring Tool breakage detection Single F500 3D probe system Renishaw TS27R Brankamp Marposs collision monitoring CMS 100 Accessories: Breuning IRCO bar guide sets and Hainbuch collets (as agreed) HSK-A40 toolholders Spare parts for this machine type, including special operating fluids Note on machine concept: Unmanned complete machining of cubic workpieces 24/7. Material supply via bar feeder D100 / 3000 mm for round and profile materials. Rotary table as positioning axis and machining of the 4 surrounding sides via vertical milling spindle. End face machining (5th side) horizontally with swivel head. Clamping of the workpiece via chuck, part separation, and 180° rotation, machining of the 6th side also horizontally with swivel head. Part removal and discharge system to parts storage. Note on machine condition: The machine was factory overhauled and technically updated by Chiron (CMS) in 2017. The last spindle replacement was performed in September 2025. The last manufacturer service was carried out in October 2025 (major annual service at 4,000 h). The machine has been continuously maintained, repaired, and kept up to date by the manufacturer under a full-service contract (preventive maintenance) from purchase until today.

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2007, b1e90960 Iodpfx Agjyn Nz Es Rotd

Kondisi: baik (bekas), Tahun pembuatan: 2014, de–hu–001 Ijdpfxoykufhe Ag Rotd

Kondisi: bekas, Tahun pembuatan: 1989, jam operasional: 12.142 h, Fungsionalitas: fungsi terbatas, Perlengkapan: dokumentasi / manual, konveyor serpihan, Dijual: pusat pemesinan Chiron FZ22 W tahun 1989 dengan dua palet. Mesin bekerja dengan presisi. Kadang-kadang terjadi kesalahan saat pergantian alat—alat tidak selalu diposisikan dengan tepat ke poros utama. Menggunakan chuck SK40. Dilengkapi kontrol Sinumerik 810. Disertakan juga conveyor serpihan dan sistem pengolahan air Knoll AE 1058.009, serta semua buku manual mesin. Dapat diuji dengan listrik atas permintaan, saat ini tidak dalam produksi. Kami tidak bisa membantu dalam proses pengangkutan. Isdpfx Asymbdiog Rstd

Kondisi: perlu perbaikan (bekas), Tahun pembuatan: 2009, Fungsionalitas: tidak berfungsi, nomor mesin/kendaraan: 281-06, Caracteristici tehnice: # Zona de prelucrare: X 550 mm; Y 400 mm; Z 360 mm # Descriere axe: 3 AXE LINIARE (X, Y, Z) + 1 ax de masă rotativă A și 2 axe de rotație B cu cap divizor indexabil cu sistem de măsurare directă unghiulară, număr de rotații 50minˉ¹, precizie +/- 5" # Inclinare ax A: +/-110˚ Itedpfx Aexxivceg Red # Dimensiune maximă piesă/fixare: Ø 247 x 830 mm; greutate max 360 kg # Viteză de avans rapid: X/Y/Z 40/40/40 m/min # Distanță între capete divizoare B1/B2: 250 mm # Turație arbore principal: 1-10.000 rpm # Priză arbore principal: DIN69893-HSK-A63 (cu răcire internă) # Schimbător automat de scule, 1x48 scule / schimb sculă-sculă mediu 2,5 sec # Scule: diametru max. Ø82 mm / lungime max. 250 mm / 5 kg Conexiune electrică: # tensiune: 3x400V/50Hz # Putere instalată: aprox 45 kVA / 80A Dimensiuni: # spațiu instalare: aprox. 4,4 x 2,3 x 3,1 m # greutate: aprox. 8.500 kg Echipamente incluse: # CNC: Siemens 840D Power Line # Extractor de span: Spring Knoll # Sistem de răcire cu ulei # Sistem de filtrare ulei max. 80 bar: Knoll HL 450/1200 # Sistem de răcire ax, ghidaje și dulap electric # 2 sisteme de ungere cu ulei # Sistem de absorbție/recuperare vapori ulei: LTA AC3002 # Sistem antiincendiu: Kraft & Bauer # Detectare prezență piesă P/Y: cu senzori de aer cu presiune joasă # Control în proces: Marposs T25 # Control rupere scule: Blum Novotech # Sistem de detecție sprijin sculă în arborele principal # Documentație: incompletă Starea mașinii: NEFUNCȚIONALĂ # ușă pentru magazie scule # senzor prezență magazie scule (BERU)

Kondisi: perlu perbaikan (bekas), Tahun pembuatan: 2007, Fungsionalitas: tidak berfungsi, nomor mesin/kendaraan: 191-89, Caracteristici tehnice: # Spațiu de prelucrare: X 550 mm; Y 400 mm; Z 360 mm # Descrierea axelor: 3 axe liniare (X, Y, Z) + 1 axă de rotație masă A și 2 axe de rotație B cu cap divizor indexabil, cu sistem de măsurare directă unghiulară, cu număr de rotații 50 minˉ¹, precizie +/- 5" # Axă A pivotare: +/-110˚ # Dimensiune maximă piesă prindere / piesă: Ø 247 x 830 mm; greutate maximă 360 Kg # Viteză rapidă: X/Y/Z 40/40/40 m/min # Distanță între capete divizoare B1/B2: 250 mm # Turație arbore principal: 1 - 10.000 rpm # Conexiune arbore principal: DIN69893-HSK-A63 (cu răcire internă) # Schimbător automat scule: 1x48 scule / timp mediu de schimbare sculă-sculă 2,5 sec # Scule: diam. max 82 mm / lungime max 250 mm / 5 kg Conexiune electrică: # Tensiune: 3x400V/50Hz Itsdpfxoxxi Rme Ag Red # Putere instalată: aprox. 45 kVA / 80A Dimensiuni # Spațiu de instalare: aprox. 4,4 x 2,3 x 3,1 m # Greutate: aprox. 8.500 kg Echipament inclus: # CNC: Siemens 840D PowerLine # Extractor rumeguș: Spring Knoll # Sistem răcire ulei # Sistem filtrare ulei max 80 Bar: Knoll HL 450/1200 # Sistem răcire arbore, ghidaje și dulap electric # 2 sisteme de ungere cu ulei # Sistem absorbție/recuperare vapori de ulei: LTA # Sistem antiincendiu: Kraft & Bauer # Detectare prezență piesă P/Y: cu detectori aer, presiune scăzută # Control în proces: Marposs T25 # Sistem detectare prezență portsculă în arborele principal # Documentație: incompletă Stare utilaj: NU FUNCȚIONEAZĂ # Motor unitate hidraulică ars

Kondisi: perlu perbaikan (bekas), Tahun pembuatan: 2007, Fungsionalitas: tidak berfungsi, nomor mesin/kendaraan: 191-88, Caracteristici tehnice: # Spațiu de prelucrare: X 550 mm; Y 400 mm; Z 360 mm # Descriere axe: 3 AXE LINIARE (X,Y,Z) + 1 ax de rotație masă A și 2 axe de rotație B cu cap divizor indexabil, cu sistem de măsurare directă unghiular, turație max. 50 minˉ¹, precizie +/- 5" # Rotație ax A: +/-110˚ # Dimensiune maximă piesă prindere/prelucrare: Ø 247 x 830 mm; greutate max. 360 kg # Avans rapid: X/Y/Z 40/40/40 m/min # Distanța între capetele divizoare B1/B2: 250 mm # Turație arbore principal: 1-10.000 rpm # Priză arbore: DIN69893-HSK-A63 (cu răcire internă) Isdexw Uplspfx Ag Rstd # Schimbător automat de scule: 1x48 scule / timp cip-în-cip mediu 2,5 sec # Diametru max. sculă: Ø82 mm / lungime max. 250 mm / 5 kg Conectare electrică: # Tensiune: 3x400V/50Hz # Putere instalată: aprox. 45 kVA / 80A Dimensiuni # Spațiu de instalare: aprox. 4.4 x 2.3 x 3.1 m # Greutate: aprox. 8.500 kg Echipare: # CNC: Siemens 840D Power Line # Extractor span: Spring Knoll # Sistem răcire ulei # Sistem filtrare ulei max. 80 bar: Knoll HL 450/1200 # Sistem răcire ax/ghidaje și tablou electric # 2 sisteme de ungere ulei # Sistem absorbție/recuperare vapori ulei: LTA AC3002 # Sistem antiincendiu: Kraft&Bauer # Verificare prezență piesă (P/Y): senzori aer presiune joasă # Control proces: Marposs T25 # Sistem detecție prezență portsculă în arborele principal # Documentație: incompletă Stare utilaj: NEFUNCȚIONAL # Ecran protecție operator spart – panoul de comandă funcțional # Lanț magazie scule # Ballbar X # Ballbar Y # Sistem prindere sculă arbore principal # Sursă alimentare driver X # Sursă alimentare driver Y # Sursă alimentare generala drivere # Unitate hidraulică complet defectă

Kondisi: perlu perbaikan (bekas), Tahun pembuatan: 2009, Fungsionalitas: tidak berfungsi, nomor mesin/kendaraan: 281-09, Caracteristici tehnice: # Spațiu de prelucrare: X 550 mm; Y 400 mm; Z 360 mm # Descriere axe: 3 axe liniare (X, Y, Z) + 1 ax de rotație masă A și 2 axe de rotație B cu cap divizor indexabil cu sistem de măsurare directă unghiulară, număr de rotații 50 minˉ¹, precizie +/- 5" # Rotație ax A : +/-110˚ # Dimensiuni maxime piesă/strângere: Ø 247 x 830 mm; greutate max. 360 Kg # Viteză rapidă: X/Y/Z 40/40/40 m/min # Distanță între capete divizoare B1/B2: 250 mm # Turație broșă: 1-10000 rpm # Priză broșă: DIN69893-HSK-A63 (cu răcire internă) # Schimbător automat de scule 1x48 scule / 2,5 sec. medie chip to chip # Scule max. Ø82 mm / lungime max. 250 mm / 5kg Conexiune electrică: # tensiune: 3x400V/50Hz # Putere instalată: aprox. 45 kVA / 80A Dimensiuni: # spațiu instalare: aprox. 4,4 x 2,3 x 3,1 m # greutate: aprox. 8500 kg Echipare: # CNC: Siemens 840D Power Line # Extractor de șpan: Spring Knoll # Sistem răcire ulei Isdpexwmvkjfx Ag Rjtd # Sistem filtrare ulei max 80 Bar: Knoll HL 450/1200 # Sistem răcire ax, ghidaje și dulap electric # 2 sisteme de ungere cu ulei # Sistem de absorbție/recuperare vapori ulei: LTA AC3002 # Sistem antifoc: Kraft & Bauer # Detecție prezență piesă P/Y: cu senzori aer presiune joasă # Control proces: Marposs T25 # Control rupere sculă: Blum Novotech # Sistem detecție suport sculă în axul de lucru (broșă) # Documentație: incompletă Stare utilaj: NEFUNCȚIONAL # Pierdere ulei hidraulic masă Peiseler # Pompă hidraulică nouă există pe stoc

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1997, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 194-03, jarak pergerakan sumbu X: 2.000 mm, jarak lintasan sumbu Y: 400 mm, jarak gerak sumbu Z: 425 mm, lebar meja: 450 mm, panjang meja: 2.280 mm, RINCIAN TEKNIS Perpindahan sumbu X: 2.000 mm Perpindahan sumbu Y: 400 mm Perpindahan sumbu Z: 425 mm Jumlah sumbu total: 3 Panjang meja: 2.280 mm Lebar meja: 450 mm Jumlah slot-T: 3 Jarak antar slot-T: 150 mm Lebar slot-T: 18 mm Kecepatan spindle: 10.500 rpm Jumlah alat: 20 Diameter alat: 65 mm Diameter dengan slot kosong: 180 mm Panjang alat maks.: 220 mm Berat alat maks.: 8 kg RINCIAN MESIN Kontrol: SIEMENS SINUMERIK 810 M Koneksi listrik: 50 Hz 3x 400 Volt Motor spindle: 18 kW Kebutuhan daya total: 31 kVA Dimensi & Berat Dimensi (P x L x T): 4.000 x 3.010 x 3.040 mm Berat mesin sekitar: 7.200 kg PERLENGKAPAN Sistem pendingin cairan Konveyor serpihan Handwheel elektronik Iedpfx Ajyhnfcsg Retd