Gergaji pita

MEBA 405 DG

Kondisi: bekas, Tahun pembuatan: 2016, jam operasional: 11.200 h,

Kondisi: baru, Tahun pembuatan: 2025, The EVP-RA 550 vibratory finishing machine from ERBA features a rising process channel floor with integrated separation. It is equipped with a quickly interchangeable screening unit and delivers high operational efficiency thanks to its integrated drop step. Emptying and separation are performed via the integrated flap (manual/pneumatic). On request, reinforced suspension and a more powerful motor can be installed for higher loads. The motor speed is infinitely adjustable via a frequency inverter (optional). The EVP-RA 550 can be interconnected with other machines via a lateral outlet. The system can be equipped with a fully automatic PLC control (optional). Kfodpfx Aajn Ut Uvohea ERBA vibratory finishing systems are distinguished by their durability and long service life, supported in part by the hot-poured polyurethane lining of the process channel. Technical Data: - Gross volume: 550 L - Channel width: 390 mm - Unbalance motor power: 4.0 kW - Speed: 1,400 rpm - Inner diameter of process channel: 1,400 mm All prices are net, plus applicable VAT and shipping costs. Product images may show equipment with optional accessories, which are available at additional cost. If you are interested, we look forward to your inquiry. We are happy to provide you with detailed, non-binding advice. The European Commission provides a platform for out-of-court online dispute resolution (ODR platform). This offer serves solely as an online presentation of our products. Contract negotiations are conducted via telecommunications (email, telephone, messaging portal). In the first step, we will provide you with a non-binding offer, which will include our general terms and conditions with imprint and information on your right of withdrawal before any purchase or contract is concluded.

Kondisi: baru, Cutting diameter round: 550 mm Cutting diameter square: 550 mm Cutting diameter flat: 550 x 550 mm Kfjdpfjfg E Hwsx Aahoa Saw blade length: 5980 x 41 x 1.3 mm Table height: 800 mm Blade speed: 20 - 100 m/min Total power requirement: 5.5 kW Machine weight: approx. 3.8 t Dimensions (L x W x H): 3.0 x 2.15 x 2.2 m SPECIAL OFFER PRICE!!!! 2-Column High-Performance Bandsaw Machines of the SBS Series The SBS series impresses with its advanced technology, high quality, durability, and an unrivaled comprehensive standard equipment package. • Modern SNC 20 control system for CNC versions • Frequency-controlled saw drive • Control buttons with pictograms • Work light • Powered chip brush • Hydraulic blade tensioning • Clamping pressure regulation • Double vice (before and after the blade) • Inch mode for positioning • Bundle clamping electrically and hydraulically pre-installed • Chip conveyor The SNC 20 control system enables convenient and uncomplicated input of up to 20 different sawing jobs (length and quantity). Once the desired dimension is entered, the control system automatically calculates the kerf and the number of feed cycles. Additionally, the error code display system enables rapid fault analysis and troubleshooting.

Kondisi: baru, Cutting range at 90 degrees: round 680 mm Cutting range at 90 degrees: square 640 mm Cutting range at 90 degrees: rectangular 1250x600 mm Cutting range at 45 degrees: round 680 mm Cutting range at 45 degrees: square 600 mm Cutting range at 45 degrees: flat 870x600 mm Cutting range at 60 degrees: round 580/550 mm Cutting range at 60 degrees: square 530/450 mm Cutting range at 60 degrees: flat 550x450 mm Saw blade length: 8140 x 54 x 1.6 mm Blade speed: 15 - 90 m/min Table height: 855 mm Total power requirement: 7.5 kW Machine weight: approx. 5.3 t Space requirement: approx. 5.75 x 4.2 x 2.75 m 2-column double miter bandsaw for fast cutting with pusher system P15. Optionally P30 Hydraulic saw frame lowering • NC-controlled • Automatic angle positioning from +60° to -60° High-quality automatic miter adjustment Specially developed for cutting profiles and beams. Maximum positioning accuracy is achieved by the new "B&S positioning system". An intelligent NC control ensures smooth interaction between the linear encoder and the self-braking positioning motor, in combination with a reliable hydraulic brake via large radial center positioning. The worktable is supported by high-quality preloaded bearings, enabling very smooth rotation. CNC control Kedpfx Aajfg E Hnjhofa A CNC control allows programming of up to 90 cutting programs with different cut lengths, quantities, and miters. Double-sided gripper positioning system The B&S pusher system, feeding and positioning system, is equipped with "double-sided opening gripper claws" which are hydraulically controlled. This guarantees secure gripping and transporting of materials and bundles that may deviate from the ideal shape. The pusher system is separately constructed and runs on ball-bearing linear guides, precision ground rack, and is driven by a frequency-controlled, robust geared motor.

Kondisi: baru, Cutting diameter round: 900 mm Cutting diameter square: 900 mm Cutting diameter flat: 900 x 900 mm Saw blade length: 9300 x 67 x 1.1 mm Table height: 790 mm Band speed: 14 - 60 m/min Total power requirement: 11 kW Machine weight approx.: 8.45 t Dimensions (L x W x H): 4,485 x 1.68 x 3.15 m The semi-automatic, hydraulic saws of the X-tech line offer best-in-class sawing technology and outstanding performance when cutting special steels. - The electrically-welded machine frame and the steel saw frame meet all cutting requirements, eliminating vibrations and noise. - The chip conveyor is hydraulically driven and has adjustable speed. - All machine movements (saw frame, vice, feed, and saw band guides) occur via modern linear guides with high static and dynamic load capacities, ensuring minimal sliding friction. - Another characteristic feature are the rollers for material positioning, powered by a hydraulic motor. These move perpendicular to the material to ensure optimal clamping. - Thanks to adjustable saw band height control, the operator can position the band close to the material’s top edge. After the cut, the band automatically returns to its previous position, or, optionally, can remain in the lower position. During the cutting cycle, the software compares the cutting load to the preset values, allowing the saw system to halt automatically in case of irregularities. - The saw band is cleaned by two adjustable steel brushes with hydraulic drive. - The hydraulic unit, including filter and pressure gauge, ensures exceptionally smooth operation at constant pressure. - Finely ground carbide inserts securely clamp the saw band and are complete with lateral, hardened, and adjustable guide rollers. The adjustable blade guide travels automatically as close as possible to the material. - The saw band is tensioned by a hydraulic cylinder, managed by the machine software. Tension is automatically released after a preset time when the machine is idle or following a completed cycle. - Automatic version with CNC control available in X-TECH 900 / 1200 models, featuring a 500 mm feed stroke, ideal for high-production series. Kjdpofg E Hpjfx Aahsfa - The material is supported by a table with seven rollers, powered by a hydraulic orbital motor, enabling precise material positioning even at maximum load. - All guided movements are driven by four recirculating ball guides with high static and dynamic load capacities, significantly reducing feed friction. The guides are hardened, ground, and prismatic. Price on request.

Tahun pembuatan: 2011, Kondisi: diremaj di bengkel (bekas), Boschert EASY SHARP Tool Grinding Machine Configured for TRUMPF Tool System (AMADA system optional) Machine for punch tool maintenance with a cooling system and particularly powerful motor, making it suitable for use with diamond grinding wheels as well. Used machine – currently being overhauled Equipment for TRUMPF tool system up to size III Accessories: - Tool holder for flat and Whisper punches - Die holders for sizes I, II, and III - New corundum grinding wheel - Dressing diamond - Overhauled cooling system and machine base Technical data: - Grinding wheel diameter: 175 mm Kodsid I T Ispfx Aahofa - Height adjustment: 150 mm - Working area: 400 x 150 mm - Motor power: 2.2 kW - Motor speed: 2825 rpm Optional: Adapter for Amada system available Pictures similar

Kondisi: baru, Tahun pembuatan: 2021, Bernardo AKPL 1600 x 40 Press Brake Technical Specifications: - Press force: 40 t - Bending length: 1600 mm - Distance between uprights: 1200 mm - Stroke length: 100 mm - Backgauge range: 0 – 500 mm - Throat depth: 200 mm - Table width: 150 mm - Table height: 760 mm - Approach speed: 60 mm/sec - Bending speed: 8 mm/sec - Return speed: 60 mm/sec - Oil tank capacity: 130 litres Kfsdpfx Asftuyweahea - Motor power: 4.0 kW - Width: 2050 mm - Depth: 1800 mm - Height: 2030 mm - Weight: approx. 3030 kg

Kondisi: baru, Cutting capacity at 90°: round 350 mm Cutting capacity at 90°: square 330 mm Cutting capacity at 90°: rectangular 450 x 320 mm Saw band length 4250 x 34 x 1.1 mm Band speed 40 + 80 m/min Table height 845 mm Saw band width 34 mm Total power requirement 2.2 kW Machine weight approx. 0.985 t Space requirement approx. 1.4 x 2.0 x 2.2 m Double mitre bandsaw, hydraulic semi-automatic, DGS 350/450 HA-I · Mitres left + right 60° without machine conversion · 34 mm saw band width · Large, ball-bearing turntable work support · Saw band guides positioned via extra wide linear guides · Powerful, robust gearbox · Large-area clamping plates · Infeed and outfeed roller · Removable chip tray (for cleaning/disinfection) · Freestanding control panel, safe and ergonomic · Storage space for bands and consumables · Cutting pressure regulator, feed regulator · Fully hydraulic vise · Super fast clamping (front loading) · Material height sensor (automatic cut start detection) Semi-automatic operation: 1. Clamp the material Kfjdpfxsfgyicj Aahea 2. Start the saw 3. Rapid lowering to material start or, for serial cutting, begin cutting immediately 4. Switch off saw band 5. Raise saw frame just above material 6. Open vise Optimal, material-independent cutting results thanks to fine adjustment of the saw frame using: * Pressure control valve (cutting pressure force) * Feed control valve (speed) * Switch with pictograms, simple and clear to operate

Kondisi: baru, Cutting capacity at 90°: round 305 mm Cutting capacity at 90°: square 260 mm Cutting capacity at 90°: rectangular 350 x 200 mm Saw band dimensions 3375 x 27 x 0.9 mm Band speed 37 + 74 m/min Table height 940 mm Kodpjfd Abajfx Aahefa Total power requirement 1.5/1.8 kW Machine weight approx. 0.61 t Space requirement approx. 1.5 x 1.75 x 1.9 m Double-mitre metal band saw with AutoCut function - Mitre cuts up to 60° left and 45° right - Ball-bearing rotary table - Side-shiftable vice - Heavy-duty, large material support - Automatic cooling system Image shows semi-automatic version.

Kondisi: baru, Neues Gerät, hergestellt in Dänemark. Hebedauer: 18 Sekunden. Be- und Entladen mittels Palettenhubwagen. Die Lasten werden auf eine ergonomisch korrekte Arbeitshöhe angehoben. Fernbedienung für Heben/Senken mit Not-Aus-Funktion. Leistungsaufnahme: 0,75 kW. Tragfähigkeit: 1000 kg. Spannung: 3 x 400 V. Minimale Hubhöhe: 80 mm. Ksdpfx Aajd Hp Efshofa Maximale Hubhöhe: 780 mm. Außenmaße: 1420 x 1140 mm. Innenfreiraum: 585 mm. Hub- / Senkgeschwindigkeit: 42 / 48 mm/s. Gewicht: 235 kg.