Gergaji lengkap (stasioner)

Mebor VTZ 1400, BM 900, SCEL 1000/10, VR 800 S

Kondisi: baru, Tahun pembuatan: 2026, Bio Machines telah mendesain lini produksi, mesin produksi, serta menyediakan layanan instalasi selama lebih dari 20 tahun. Kami menawarkan baik lini produksi lengkap maupun mesin individu yang disesuaikan dengan kebutuhan Anda. Solusi kami meliputi: Lini produksi pelet Lini produksi briket Sistem pengeringan: rotary dan belt dryer Hammer mill Konveyor lantai (moving floors) Silo pakan ternak Chipper kayu Isdpfxsylm Tyo Aa Dsid Konveyor rantai, bucket, screw, dan belt Siklon Silo penyimpanan Pendingin pelet Saringan serbuk gergaji dan pelet Mesin pengemasan untuk karung kecil dan besar Lini paletisasi karung dan banyak mesin khusus lainnya

Kondisi: baik (bekas), Board sorting line / Sorting system / Length sorting line Esterer Right-hand discharge 5 sorting bins Total length: 26 meters 1st bin: 2 meters 2nd bin: 3 meters 3rd bin: 4 meters 4th bin: 5 meters 5th bin: >5 meters Good condition – immediately available Location: Germany, near Landau an der Isar Iedpfx Ajgw Scqea Djid Please also see my other listings. I look forward to your inquiry.

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, tegangan masuk: 400 V, jenis arus masuk: tiga fasa, ketinggian potong (maks.): 400 mm, panjang mata gergaji pita: 5.550 mm, lebar pita gergaji: 80 mm, panjang meja: 800 mm, lebar meja: 1.060 mm, tinggi kerja: 400 mm, pl-hu-001 Ijdpfx Aaow H Rq Hs Dsid

Kondisi: bekas, 3213 Thermal Treatment Plant / Vacuum Dryer WTT Used, Year of Manufacture 2017 Thermal treatment system / thermal chamber for wood modification The WTT thermal chamber is a plant for the thermal modification of wood. It enables efficient treatment of 2 to 3 batches per day, depending on the thickness and type of wood. The system features a powerful energy and heat transfer system and operates with a gas- or oil-fired boiler plant that uses thermal oil as a heat transfer medium. Iodpfx Aov Si Szja Deid Technical Data: Capacity: 5,950 – 9,900 m³ of wood per year (at 330 operating days) Usable volume: 9 m³ (at 50 mm wood thickness) Stack dimensions: 10,500 x 1,300 x 1,100 mm (L x W x H) Minimum board thickness: 10 mm Electrical connection: 3 x 400 V, 50 Hz + Neutral + Earth, 63 A Specific power consumption: 15.9 kW/m³ Maximum heating capacity: 2 MW (230°C – 250°C thermal oil) Heat consumption: 120 kWh/m³ of wood Autoclave length: 11,000 mm Autoclave diameter: 1,800 mm Autoclave material: 10 mm Duplex stainless steel EN 4462 Hydraulically operated door with 1.5 kW drive Working pressure: 0.1 to 15 bar (absolute) Operating temperature: 0°C to 220°C 200 mm glass wool insulation, clad with 1 mm galvanized steel sheet Main Components: 1. Autoclave for the heat treatment process 2. Vacuum system for evacuating the autoclave before heat is applied 3. Energy center with a 2 MW oil burner 4. 4 MW cooling system with dry coolers 5. Nitrogen generator 6. Gas cooling system Heating and Cooling System: Heat exchangers: 8 units (4 per side) Material: Stainless steel tubes (sea water resistant) Total area: 165 m² Cooling water consumption: 1,000 l/batch (not contaminated, only heated) Control and Operation: Control system: WTT ExoT (fully automatic) Display: 22" color monitor with IBM computer and printer Sensors: 4 PT100 temperature probes 2 mechanical thermometers 1 vacuum/pressure transmitter 1 mechanical vacuum/pressure gauge Special Equipment: Hydraulic rail bridge for easy transport of wood trolleys Automatic trolley extraction with cable winch (1.5 kW) 2 MW thermal oil boiler (heating) Heating oil tank (4,000 l) with measuring system Insulated 20-foot steel container for heating module Stainless steel safety chimney (300 mm diameter, 6,000 mm length) Functional Description: 1. Loading the autoclave with wood 2. Generating preliminary vacuum 3. Filling with gas 4. Heating 5. Modification 6. Cooling 7. Pressure equalization 8. Generating final vacuum / drying 9. Pressure equalization 10. Unloading Certified according to EC Pressure Equipment Directive (PED) 97/23/EC Design according to EN 13445 Sale on behalf of the customer, ex location near 5020 Salzburg (Austria), without dismantling, transport or assembly Dismantling, loading, and transport by us optionally available Subject to error in description and price To avoid misunderstandings, an on-site inspection is possible and recommended by appointment Sale as is Technical data, condition description, year of manufacture, and scope of delivery according to manufacturer’s brochure or previous owner, without guarantee Subject to prior sale No warranty for used machines; sold as inspected Pictures and videos are for reference only and do not represent the actual scope of delivery Payment terms: Prices plus statutory VAT, payment prior to pickup or shipment Delivery terms: ex location

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Söderhamn liten stocklinje med Euromill-profiler Barkmaskin Cambio 45 med inmatning och styrverk därefter Iedpfx Aaowp E E Ds Deid 2D-skanner Söderhamn 447 inmatning 240-12 kantspånshyvlar Blocktilt och inmatning 240-12 kantspånshyvel Euromill-profiler Brädavskiljare med justerbart centrum Spåntransportör under såglinjen Hydraulaggregat och elskåp.

Kondisi: baru, Tahun pembuatan: 2026, Maximize profits with TRV 1200L and TRV 1600L: From sawmill to firewood TRV 1200L Ø550: Efficiency and Speed for Continuous Cutting Optimize your waste management and turn production leftovers into immediate economic value! The TRV 1200L Ø550, with its advanced design, is the ideal solution for sawmills handling large volumes of multilayered offcuts and flitch slabs. The result? A continuous and automated disposal process that converts waste into high-quality firewood. Iodpfjv Ip T Rox Aa Djid Key Features: Simplified Handling: Discharge scraps and waste indiscriminately onto the wear-resistant conveyor/roller table (VV). Intelligent Clamping System: Innovative technology allows processing of overlapping pieces with varying shapes and thicknesses. Enhanced Precision: PLC-automated cutting system with time-controlled longitudinal measurement of cut pieces. Independent Sections: Equipped with 5 sections, each with its own pneumatic cylinder and shock absorbers for maximum stability. Increased Safety: Advanced Protection System: Access door to moving parts equipped with a safety interlock switch. Sealed, non-duplicable safety key for exclusive access. Protective channel with sealed key and reinforced blade guard for maximum operator safety. Rapid Saw Blade Drive Stop (

Kondisi: sangat baik (bekas), Tahun pembuatan: 2020, Fungsionalitas: berfungsi sepenuhnya, Dijual: Bandsaw Wood-Mizer WB2000 (Tahun Pembuatan 2020) Dijual Wood-Mizer WB2000 tahun 2020, namun baru mulai digunakan sejak 2021. Mesin ini dirawat secara rutin, hanya sedikit digunakan dan berada dalam kondisi teknis yang sangat baik. Spesifikasi teknis: Iijdpfoyha Ipsx Aa Dsd Motor listrik bertenaga 30 kW Diameter batang hingga sekitar 1 m Lebar pemotongan hingga sekitar 90 cm Kapasitas angkat sekitar 6 ton Cocok untuk mata gergaji pita lebar 90–100 mm Perlengkapan (termasuk): Konveyor pemuatan/pemasukan lengkap Meja keluaran dengan distribusi material ke tiga arah (kiri/kanan/lurus) Sistem kamera untuk pemantauan pemotongan Panel kontrol PRO dengan layar sentuh Dilengkapi sistem penjepit cepat tambahan Mesin dapat dilihat dan diuji di lokasi, semua fungsi bekerja dengan sempurna.

Kondisi: baru, The new Holzprofi Maker cylinder brush and sanding machine can be converted from a sanding machine to a brushing machine in just a few seconds, quickly and easily. This versatile unit is ideal for smaller workshops, as it combines two machines in one. Benefits and Features: - Versatile options for surface treatment - Fast and easy conversion from sanding to brushing - Wide choice of brushes available for diverse effects and processing possibilities - Infinitely variable feed rate and roller speed for perfect results - Workpiece width up to approx. 1100 mm - Precise adjustment of sanding height for consistent results Technical Data: Sanding width: 560 mm (1120 mm) Sanding height: 3 to 75 mm Roller diameter: Ø132 mm Table dimensions: 592 x 530 mm Extension table dimensions (2x): 582 x 245 mm Roller speed: 0 to 1800 rpm Feed speed: 0 to 7.5 m/min Dust extraction port: Ø100 mm Main motor power: 1.5 kW Feed motor power: 120 W Voltage: 230 V Dimensions: 1010 x 1060 x 1190 mm Weight: 155 kg Ijdpfxewzzivs Aa Djid Optional Accessories: - Structuring brush for even and textured surfaces - Sanding flap brush for finishing and surface preparation - Steel wire brush for a used-look finish and a pronounced grain effect

Kondisi: bekas, No. 10019 Various Conveyor Belts / Transfer Belts Used Consisting of 6 items: Pos. 1: Blue conveyor belt, approx. 8,000 x 800 mm (L x W), previously used for waste Pos. 2: Orange conveyor belt, approx. 12,000 x 1,200 mm (L x W), as new Pos. 4: Two blue mobile conveyor belts, each approx. 10,000 x 800 mm (L x W) Pos. 5: Two turquoise conveyor belts, 1st belt approx. 10,000 x 1,600 mm (L x W), 2nd belt approx. 4,500 x 1,400 mm (L x W), very robust - with sheet metal base, each requires a new motor and gearbox Pos. 6: Blue Westeria conveyor belt, approx. 14,000 x 1,200 mm (L x W) Pos. 8: Green mobile Z-conveyor belt, approx. 7,000 x 500 mm (L x W), new belt, as new Sale on behalf of customer, ex location near 85456 Wartenberg, without dismantling, transport or installation Errors in description and price excepted Iisdpfx Aaewhp H Ne Ded Dismantling, transport, and loading by us possible as an option To prevent possible misunderstandings, an on-site inspection by appointment is possible and recommended Sale is as-is Technical data, condition description, year of manufacture and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale No warranty given for used machines; sold as inspected Pictures and videos are examples and do not represent the actual scope of delivery Terms of payment: Prices plus legal VAT, payment before pickup or shipment Delivery conditions: ex location

Tahun pembuatan: 2026, Kondisi: baru, VKM - Package Singulation for Milled Timber With the singulation of milled timbers, whether loosely stacked or bundled, already milled timber can be processed further in a cost-effective manner. In a two-stage process, the timber is singulated for subsequent processing. It is also possible to automatically feed the singulated timber into a continuous process. Iisdpfog Rxhgsx Aa Dsd The feeder is mechanically designed to reliably process even warped timber. Furthermore, it can be adjusted to the diameter of the timber to ensure that only a single piece is transported at a time, preventing blockages or downtime further along the processing line.