MC304 Ariel 5 9500

MECAL MC 304 Ariel – 5 MDT

Kondisi: sangat baik (bekas), Tahun pembuatan: 2022, Fungsionalitas: berfungsi sepenuhnya, jam operasional: 3.100 h, jarak pergerakan sumbu X: 15.600 mm, 5-axis machining center X-axis travel: 15,600 mm Y-axis travel: 1,400 mm Dsdpfx Agev S Iubo Dscg Z-axis travel: 700 mm A+C axis (HS 300 milling head) Electrospindle HSK, 11 kW 12-position tool magazine Blade magazine, 450 mm diameter 12 independent automatic clamps Option: cut and separate

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2018, 1 Dodpfx Ajyh Nv Hjg Decg

Kondisi: baik (bekas), Tahun pembuatan: 2009, Elumatec SBZ 140, Extended Length: 7.6 meters Approximate weight: 5,000 kg Automatic tool changer 2-section clamping system 2 pneumatic stops Safety enclosure Light curtains Automatic clamp detection Central lubrication Cooling spray system Chip trolley Conditioning unit Max. spindle speed: 24,000 rpm Tool holder: HSK-63F adapter, 8-position tool changer. Max. milling diameter: 80 mm Max. saw blade diameter: 200 mm Compressed air: 7 bar The SBZ 140 is a 4-axis profile machining center (axes: X, Y, Z + A). Designed for aluminum and thin-walled steel profiles. 4-axis CNC machining center (X/Y/Z + tilting/rotating A-axis) X-axis: approx. 7,900 mm travel Y-axis: approx. 850 mm travel Z-axis: approx. 650 mm travel A-axis (rotation/tilting): Freely programmable angle, –90° to +90° Dedpfex E Ahzsx Ag Djcg Axis feed rate: X-axis up to approx. 65 m/min, Y and Z axes up to approx. 60 m/min (depending on configuration) Control: 4-axis CNC system, with PC control, color display, USB & network connection. Software: eluCam. Automatic material clamps, automatic positioning via dowel pins. Pendulum/shuttle operation (two work zones), increasing production throughput. Applications include milling, drilling, tapping, sawing, and comprehensive profile processing—all with profiles clamped in a stationary position. Please note: The information on this page has been gathered and compiled to the best of our knowledge, but accuracy cannot be guaranteed. Accordingly, this does not constitute a representation or contract, and we advise you to verify all relevant details. Financial information VAT/Margin: VAT: The listed price is excluding VAT (VAT deductible for businesses).

Kondisi: sangat baik (bekas), Tahun pembuatan: 2014, nomor mesin/kendaraan: XZ 10480, kecepatan rotasi (maks.): 3.500 rpm, Mesin dalam kondisi beroperasi / 400 FCRO 32 mm / Mesin pemotong untuk industri busa, Tipe Panda 400, M80, 1,9 kW, Dcsdpfxew Iwaij Ag Djg Tahun pembuatan 2014, Pisau gergaji 400 mm, Dimensi total 1155 x 100 x 140 cm (dengan meja rol), Dimensi tanpa meja rol: 71 x 100 x 140 cm.

Tahun pembuatan: 2018, Kondisi: baik (bekas), For machining aluminium and steel profiles Dodpfsx Diqwex Ag Docg Fully functional and in very good condition Processing length: 7200mm 3-axis control with 15” screen Tool changer: 8 positions / turret 8 pneumatic horizontal material clamps Autonomous clamp positioning Two separate work zones, suitable for pendulum operation 2 pneumatic material stops 8 tool positions / BT30 turret Barcode scanner Handheld control device Safety light curtain at the front and side safety fence Minimum quantity lubrication Centralised lubrication Thread cutting without floating holder Simple programming via the control panel High-speed spindle up to 18,000 rpm Including 3 angle heads X-axis [mm]: up to 7,200 / 7,200 Y-axis [mm]: up to 485 / 310 Z-axis [mm]: up to 340 / 260 Traverse speed X-Y-Z axes [m/min]: 60/60/60 Max. milling cutter diameter: 25mm Max. saw blade diameter: 180mm Max. tool length: 200mm (tool + holder) Max. spindle speed: 6,000 rpm Spindle power: 6 kW Weight: approx. 5.5 t Total power-on hours: 30,844 h Total spindle hours: 11,583 h

Kondisi: bekas, Tahun pembuatan: 2023, Double Glazing Bead Saw TRF 527 VIS CE 1 unit DOUBLE GLAZING BEAD SAW TRF 527 VIS CE TRF 527 VIS: Double mitre saw for simultaneous cutting of two glazing beads positioned on top of each other. The right saw unit is fixed, the left unit is adjustable; the set cutting length can be read from a digital display. Both units are equipped with supports, enabling the simultaneous cutting of two glazing beads. For cutting larger cross-sections, the upper support can be removed. After the cutting process, the pneumatic clamping cylinders automatically swivel out of the way to simplify loading and unloading of the machine. STANDARD EQUIPMENT - Fixed right-hand aggregate - Digital measurement display - Pressure switch - 2 carbide-tipped saw blades - Electrical system with motor brake, undervoltage release, motor protection switch - Pressure switch - Tool kit - Safety devices with horizontal, swiveling clamping system - Two-hand operation - Belt drive - Pneumatic aggregate lift - Central support TECHNICAL DATA - Motor power: 2 x 1.2 kW - Saw blade diameter: Ø 220 mm - Max. cutting height without support: 80 mm - Max. cutting width at 90°: 55 mm - Max. cutting width at 45°: 40 mm - Max. cutting length: 2,800 mm (optionally 4,000 mm) - Min. cutting length: 158 mm - Weight: 217 kg - Space requirements (standard configuration): 3,000 x 850 mm Extended cutting capacity: 1 unit Max. cutting length: 4,000 mm Star stop with four positions: 1 unit Set of 2 mechanical stops for setting up to 4 intermediate angles Additional central support: 1 unit Adaptations for rebated profiles: 1 unit Adaptations for rebated profiles as per drawing: Dcedpfxjxnlgce Ag Dog - Fitting on the clamping devices to compensate for the profile inclination - Inserts on the rear stops of the saw units and on the central support In the sketch below (in green), a beveled pressure piece is shown, following the inclined profile and pressing it against the (red) insert at the stop. Location: Garbsen

Kondisi: bekas, Weinig Profimat 22 A 4 left mobile unit with measuring sensor, enabling automatic adjustment based on the width of the workpieces being processed. Dcodpfxeryb D Se Ag Djg Dimensions and weight: 330 x 145 x H160 cm. Weight: 1,400 kg (on pallet).

Tahun pembuatan: 2004, Kondisi: siap digunakan (bekas), A fully automatic Schüco glazing bead saw is available. Saw blade diameter: 400mm, cutting angle: 45°/90°, motor type: E63SP-2, speed: 2800 rpm. An on-site inspection is possible. Dcedjwu Ez Nopfx Ag Djg

Kondisi: baru, Saw blade diameter: 370 mm Cutting range at 90 degrees: round 120 mm Cutting range at 90 degrees: square 100 mm Cutting range at 90 degrees: rectangle 180 x 100 mm Working height: 925 mm Saw blade speeds: 15 - 70 rpm Total power requirement: 1.8 / 2.2 kW Machine weight: approx. 0.71 t Space requirement: approx. 1.9 x 1.45 x 2.1 m SPECIAL PRICE!!! High-performance vertical circular saw, fully automatic hydropneumatic version. (20192) - Mitre cuts: left 60° / right 45° - Hydro-pneumatic saw unit control - Electro-pneumatic material feed unit - Smooth-running, high-performance worm drive with large transmission ratio, integrated in a sturdy cast housing for optimal cutting results - Vise with double clamping arm for low-burr cuts, also with side quick-change feature for mitre adjustment - Precision prism guide of the gearbox head, adjustable from the side Dcodpfx Agod Iin Hs Deg - Extra-sturdy base frame with built-in automatic coolant system - Large chip drawer - Chip removal brush in the saw blade guard MPS Control System: - Storage of cut start / end positions - Display of power consumption, quantity, cutting time, etc. - Adjustable water cooling - Cutting pressure regulator NOTE: Price does not include saw blade! (Saw blade price: €204)

Kondisi: baru, Tahun pembuatan: 2026, Ganz gleich, welche Schnittaufgabe Sie haben – die A700 ist die einzige Säge, die Sie jemals benötigen werden. Mit der größten Schnittkapazität ihrer Klasse und einem enormen Gehrungsbereich von ±75° ist sie für echte Hochgehrungsschnitte ausgelegt, ohne Kompromisse bei der Größe der zu schneidenden Aluminiumprofile einzugehen. Ideal auch für das Bündelschneiden mehrerer Profile gleichzeitig und hochpräzise. Hochgeschwindigkeits-Aluminiumverarbeitung mit präzise geregelten Bewegungsabläufen durch eine PLC-Steuerung. Pneumatisch betätigte Schutzhaube, die sich per Knopfdruck öffnet und schließt – für einen vollständig freien Zugang zum Sägetisch. Sicherheitsschalter, der die Säge beim Anheben der Haube deaktiviert. Optional CNC-gesteuerte Gehrungseinstellung der Säge mit Touchpad-Bedienung. • Ø700 mm Hartmetall-Kreissägeblatt mit 4 kW Antriebsmotor • Nach AS / NZS 4024:2014 Sicherheitsstandard, Zweihandbedienung beim Sägeschnitt • Überkopf-Schutzhaube mit Sicherheitstunneln, jeweils 900 mm beidseitig der Säge • Schutzhaube pneumatisch auf Knopfdruck anhebbar • Sicherheitsschalter schaltet den Sägebetrieb beim Anheben der Haube ab Dcedjmb U Tuopfx Ag Djg • 2x vertikale und optional 2x horizontale Spannzylinder mit einstellbarem Spannungsdruck • Gehrungsbereich ±75° mit Rastpunkten bei 0°, ±15°, ±22,5°, ±30°, ±45°, ±60°, ±75° • Dosier-Schmiersystem für das Sägeblatt • Luftdüse und LED-Innenbeleuchtung • 2× Ø100 mm Anschlussstutzen für Späneabsaugung • Optional 2,2 kW Späneabsauganlage • Optional automatisches Gehrungseinstellsystem Besonders geeignet für: • Serienfertigung von Aluminium • Herstellung von gehrungsverschweißten Aluminiumkonstruktionen • Herstellung von Fenstern und Türen • Fertigung von Rollläden, Jalousien und Möbel • Herstellung von einbaufertigen Aluminiumrahmen und -konstruktionen • Produktion von Aluminiumfassaden