Pilih dan tempatkan mesin

Mechatronika M10V

Kondisi: baik (bekas), en-GB: Manufacturer: WMW Zeulenroda Model: PYE 160 SS Year of manufacture: 1980 C-frame construction Die height: 850 mm Bolster plate thickness: 100 mm Throat depth (C side): 360 mm Specifications Metric | US Standard Capacity: 160,000 Table length: 1,250 mm Table width: 600 mm Ram stroke: 500 mm Approach speed: 100 mm/min Working speed: 10 mm/min Return speed: 125 mm/min Motor power: 22.5 kW Dimensions (approximate) Length: 2,150 mm Nlodpfowp Nv Hsx Aiveg Width: 1,250 mm Height: 3,600 mm Weight: 7,500 kg Please note: The information on this page has been provided to the best of our knowledge and, where possible, obtained from the manufacturer. The information is supplied in good faith, but accuracy cannot be guaranteed. As such, no representation or contractual obligations are implied. We recommend verifying all critical details.

Kondisi: baru, DAPAT DIBELI ATAU DISEWA Mohon baca spesifikasi teknis secara lengkap. Jika mesin ini sesuai untuk investasi Anda, kami mohon Anda memberikan informasi kontak yang lengkap, termasuk nomor telepon dan alamat email yang benar, agar kami dapat memberikan penawaran harga. Laser Serat 30W Area penandaan: 200 x 200 mm Ukuran benda kerja maksimum: L x T x D: 550 x 450 x 350 mm Jenis laser: Serat 30 Watt Panjang gelombang: 1064 mm Kecepatan penandaan maksimum: 7000 mm/detik Sumbu Z bermotor, tinggi: 700 mm Akurasi pengulangan/lensa: +/- 0,001 mm Ketebalan garis minimum: sekitar 0,01 mm Nlederu E Svjpfx Aivsg Catu daya: 240 V/50 Hz Dimensi luar: 110 x 80 x 200 cm Pintu depan: manual Termasuk perangkat lunak dan PC Dapat diperiksa secara langsung saat dinyalakan Harga bersih, belum termasuk PPN

Tahun pembuatan: 2009, Kondisi: siap digunakan (bekas), Connected load: 18 kW, but the unit was completely overhauled in 2017. An inspection is possible. Nedon Htktjpfx Aivolg

Tahun pembuatan: 1979, Kondisi: bekas, Pressing force 160 t Clearance between uprights 850 mm Stroke 400 mm Slide area 800x700 mm Ejector stroke 300 mm Ejector force 20 t Table area 800x700 mm Total power requirement kW Machine weight approx. 12 t Space requirement approx. 1800x1800x4200 mm Njdpfx Aolp Uz Roivelg Sick BWS for safety and automatic operation Blow-off device Ejector Mechanical fixed stop Stroke/pressure cut-off Pressure hold time Approved for manual loading/unloading

Kondisi: siap digunakan (bekas), Fungsionalitas: belum diuji, nomor mesin/kendaraan: FN41918, Tahun pembuatan: 2011, kapasitas angkut: 2.500 kg, tinggi angkat: 2.900 mm, jenis bahan bakar: listrik, kapasitas baterai: 620 Ah, tegangan baterai: 80 V, berat kosong: 3.310 kg, warna: kuning, Perlengkapan: kabin, Truk Forklift Listrik 4 Roda Jungheinrich Nedpfx Aierwxkwevslg Tipe: EFG 425 K Tahun pembuatan: 2011 Inspeksi dapat dilakukan kapan saja sesuai kesepakatan.

Tahun pembuatan: 2019, Kondisi: siap digunakan (bekas), Heads: 4, Feeder Slots: 58, Placement Accuracy: +/-0.01mm, Production Capacity: 6,000 CPH, Camera Field of View X/Y at 20µm Resolution: 48mm/40mm, Machine Dimensions X/Y/Z: approx. 1000mm/760mm/600mm, Weight: approx. 100kg. Documentation available. On-site inspection possible. Nledpfxouhqchs Aivog

Tahun pembuatan: 2004, Kondisi: baik (bekas), Fungsionalitas: berfungsi sepenuhnya, For sale from ongoing production: 1 Juki FX-1 and 2 units of Juki FX-2. Please contact us if you have any questions. Nedpfx Aiovk R H Rovolg

Tahun pembuatan: 2014, Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, For sale is a SMD pick-and-place machine from Fritsch GmbH, model placeALL 610, equipped with a placement head featuring laser centering. The machine is fully operational and ready for immediate use after programming. Technical specifications: Type: placeALL 610 Year of manufacture: 2014 Placement capacity: 600 components/hour Chips: From 0402 chips up to 22x22 mm (optionally up to 32x32 mm) Laser centering: Non-contact "on-the-fly" Slots: 108 Feed positions: 208 for 8 mm tapes Placement table: 520x370 mm Placement area: 620x450 mm Tooling: 5 x standard Additional features: Njdpfowy U Nmox Aivjlg - Camera System: Vision System II + lighting - Dispensing system: CD-05 placement tool & blow-off function - Frame adaptation; access for robotic arm from the left - Universal CAD conversion - Barcode reader for ID barcode - Camera attachment for LM-, SM-, and FP systems - and much more Feeders: - 2 pcs feeder racks with 16 slots each for tape/tubeFEEDER, front and rear side PA610 - 1 pc feeder rack with 22 slots for tape/tubeFEEDER, left and right side PA610/L - 20 pcs tapeFEEDER 8mm (max. tape thickness: 1.1mm; max. tape height: 6.0mm; max. tape width: 8.3mm; max. reel width: 17.5mm; slots: 1) - Barcode compatible - 4 pcs tapeFEEDER 12mm (max. tape thickness: 1.4mm; max. tape height: 6.0mm; max. tape width: 12.3mm; max. reel width: 17.5mm; slots: 1) - Barcode compatible - 2 pcs tapeFEEDER 16mm (max. tape thickness: 1.4mm; max. tape height: 13.0mm; max. tape width: 16.3mm; max. reel width: 30.5mm; slots: 2) - Barcode compatible, including feeder extension 908.120.007 - 1 pc tapeFEEDER 24mm (max. tape thickness: 1.4mm; max. tape height: 13.0mm; max. tape width: 24.3mm; max. reel width: 30.5mm; slots: 2) - Barcode compatible, including feeder extension 908.120.007 - 1 pc vibration tubeFEEDER (handles up to 10*SO sticks; slots: 5) - Barcode compatible - 1 pc feeder setup station with software for setup and complete component creation, connection to PC via RS232 (PC not included) - 1 special PA wire feeder for supplying and cutting wire pins, including placement tool - 5 pcs tape feeder TF 943, cassette for 8 mm reels, width 11 mm Transport and loading can be organised Europe-wide upon request and at extra cost. Prices plus VAT. Inspection is possible by appointment. Contact us—our team is happy to assist you. Trade-in or exchange possible! Machinery trading PURCHASE / SALE OF PRODUCTION AND METALWORKING MACHINES, AND MORE. Are you looking for a high-quality yet affordable metalworking machine for your production? Or do you want to sell yours? For further information or contact options, please visit our website.

Tahun pembuatan: 2012, jam operasional: 63.311 h, Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: Y27639, Pick-and-place machine fully functional Nlsdpfx Asudk A Hjiveg

Kondisi: baru, Tahun pembuatan: 2026, Fungsionalitas: berfungsi sepenuhnya, daya: 4,5 kW (6,12 hp), jumlah sumbu: 3, berat keseluruhan: 880 kg, panjang meja: 2.500 mm, lebar meja: 1.300 mm, Perlengkapan: Penandaan CE, dokumentasi / manual, With this universal CNC milling machine, you can cut, engrave, or 3D mill any shape. The Wattsan M1 6090 enables you to produce decorations, furniture, advertising materials, and packaging. This machine is compatible with various materials including wood, MDF, chipboard, acrylic, plexiglass, PVC, composites, and aluminium. Nledpervh Ebsfx Aivog The worktable of the Wattsan M1 6090 measures 600x900x200 mm. A 2.2 kW spindle and a T-slot table are included as standard. Compared to the A1 6090 model, the machining depth can be increased by 20% in a single pass thanks to the 300 mm gantry height. For more details, you can call our managers! Features of the Wattsan M1 6090 Work area: 600x900 mm Spindle: 2.2 kW Machine dimensions: 1380 x 1500 x 1890 mm Weight: 400 kg Virmer not only provides top-class machines, but also service and delivery. Our engineers and managers are ready to answer all your questions and, if needed, provide video support. In addition, owners of Wattsan equipment receive lifetime online support. Virmer is based in the Netherlands and operates throughout Europe. Virmer is the official supplier of Wattsan. We not only deliver laser engravers, but also metal cutters, welding machines, markers, and cleaning machines. Wattsan is a Chinese manufacturer that has been producing laser equipment for nearly 15 years and continuously develops with the help of its customers. Thanks to user feedback, Wattsan has made over 50 upgrades that have made the machines more reliable, precise, and powerful—enabling you to take your business to the next level. YOU CAN WRITE OR CALL US! WE'LL SELECT THE RIGHT MACHINE FOR YOUR APPLICATION If you are looking for the right laser or CNC milling machine, we are at your service. You will find a wide range of laser machines and equipment with us: CO2 laser machine; metal laser cutting machine; laser metal cutter; fiber laser for metal; fiber laser engraving machine; CNC milling machine for metal; milling machine for wood; CNC milling machine; laser engraving machine; laser engraver; plywood laser cutting machine; laser engraver; metal laser cutting machine; CNC milling machine; laser marker; lenses; chillers; machine cooling systems; S&A chillers; IPG Laser, MAX Photonics, Raycus; compressor; rotary attachment; mirrors for laser machine.