Band saw

Mega BS-400

Kondisi: bekas, Tahun pembuatan: 2015, nomor mesin/kendaraan: A2536805, Pressure: 40 t Stroke: 250 mm Retracting Force: 6.3 t Motor: 5.5 kW Max. Working Height: 450 mm Max. Approach Speed: 90 mm/sec Nkjdpefxyhfofx Agljt Pressing Speed: 10 mm/sec Travel Distance (w): 250 mm Ram Plate: 500 x 200 mm Table Plate: 600 x 650 mm with T-slots Table Cut-out: 200 x 170 mm Table Height: 850 mm Oil Tank: 200 l The described machine can be custom-built for you. Production time is approximately 5 months from receipt of payment. Approach: The press moves to the zero point at up to 90 mm/second. The positioning accuracy is 0.5 mm or better. Return: The press moves back to the end point at up to 90 mm/second. The accuracy here is 0.5 mm or better. The dwell time is adjustable from 0 to 10 seconds (in increments of 0.1 seconds). The press force can be adjusted between 10 and 40 tons (in bar). Further control details: The control system can be locked with a key switch. The key switch for the control system has the following functions: - Manual operation via two-hand control at 9.5 mm/sec in setup mode. (Stops at any desired position when the switches are released.) - Manual operation for bending tasks at up to 9.5 mm/sec using two-hand control and automatic return to top dead center when both two-hand buttons are released. - Automatic operation with secure tooling at up to 200 mm/sec. This function is labeled with a warning on the control panel. In automatic mode, the machine may only be used with fully enclosed, secure tooling—this information is clearly displayed on the front of the machine. In manual setup mode, the machine can also be operated via the two-hand control at a maximum of 9.5 mm/sec. Bending operations can also be performed in setup mode. A key selector switch is used to toggle between automatic and manual operation. Position adjustment for top and bottom dead center as well as switching position for speed reduction is managed via sensors that are adjustable on a chrome-plated rod. A clamping thread allows for fine sensor adjustment—accuracy is +/- 0.5 mm. The press can be equipped with a bending blade and, using the two-hand control, can perform sheet metal bending as well as punching, notching, and bending in automatic mode with secure tooling.

Kondisi: bekas, Single-column hydraulic press, straightening press, punching frame ECKOLD Press frame with hydraulic cylinder, mobile press, punching unit Type: RSD 1500 - 125 Machine no.: 317 / 690 Year of manufacture: approx. 1986 Pressing force: 150 tons Throat depth: 125 mm Ram stroke: 35 mm Table size: 280 x 210 mm Ram surface: Ø 125 mm Installation height (ram to table): max. 265 mm Table height above floor: 403 mm Hydraulic operating pressure: max. 500 bar - Without hydraulic power unit - Ram surface with 4 threaded holes M16 and 20 mm guide slot, centered centering hole Ø 15 mm Nkedpfxsd Swtaj Aglot - 1 high-pressure hydraulic hose with external thread M30x1.5 mm, hose length 4 meters - 1 high-pressure hydraulic hose with union nut M30x1.5 mm, hose length 4 meters Required space (L x W x H): 700 x 300 x 1450 mm Weight: 1250 kg Good condition

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1999, de Nedownd Iuepfx Aglokt

Kondisi: baru, Tahun pembuatan: 2025, panjang mata gergaji pita: 4.420 mm, lebar pita gergaji: 34 mm, Double Column Bandsaw Fully Automatic Everising H-360 HB Cutting range round: 0 – 360 mm Cutting range square: 360 x 360 mm Bundle clamping width: 180 – 280 mm Bundle clamping height: 50 – 160 mm Drive power: 3.7 kW Saw blade dimensions: 4420 x 34 x 1.1 mm Weight: 2,310 kg Machine dimensions: 2,500 x 2,200 mm Standard equipment of the machine includes: • Heavy-duty steel construction with double column design • NC feed system • Infinitely variable, frequency-controlled cutting speed (inverter-controlled) • Digital cutting speed display • Hydraulically operated double horizontal vises Nedpjq St U Nofx Aglskt • Hydraulic saw blade tensioning • Saw blade guides (including back guide) made of carbide • Hydraulically pre-tensioned blade guides • Precision PLC control for all hydraulic and electrical components • Cut counter with automatic shut-off • Automatic end-of-material shut-off • Multi-job function • Bundle clamping device • Powered swarf brush • Automatic blade break control including emergency shutdown • Swarf rinse gun • Flexible work light • 2-metre roller conveyor • Toolbox • Carbide function Special equipment included: • Variable clamping pressure reduction • Cut deviation control Comprehensive, complete German documentation.

Kondisi: baru, Tahun pembuatan: 2024, Fungsionalitas: berfungsi sepenuhnya, en-Baty SM350 Profile Projector – High-Performance Inspection for Demanding Applications The Baty SM350 is an advanced profile projector featuring a 350 mm screen and a robust, high-precision staging table with a measuring range of 250 mm x 125 mm. It is ideally suited for precise optical inspections in settings where reliability and accuracy are of utmost importance. Nkjdpfxeuyh Rpo Aglet XLS: A simple 2-axis digital readout for X and Y measurements, ideal for basic applications. MX200: This model expands capabilities to include geometric measurements, such as angle, radius, and distance calculations, and enables the generation of tolerance reports. FT2: The most advanced version offers a touchscreen interface with Fusion 2D software. This model provides optical edge detection and comprehensive reporting, including SPC charts and DXF overlays. The device is equipped with a 3-position lens turret, allowing for quick and easy switching between different magnification lenses without the need for recalibration. With the FT2-E display option, the SM350 also provides advanced measurement features such as edge detection and DXF overlay. These functions make it the ideal solution for detailed inspections and demanding measurement tasks in manufacturing industries.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2007, Okuma MB-46VAE pusat pemesinan Nsdpfx Agjxwtp Delskt Tahun pembuatan: 2007 Kontrol: OKUMA OSP P200-M Ukuran meja: 1000 x 460 mm Perjalanan X: 762 mm Perjalanan Y: 460 mm Perjalanan Z: 460 mm Beban meja: 700 kg Pendingin spindle Konektor MAS BT40 Majalah alat 42 slot Berat: 6500 kg Dimensi (PxLxT): 2750 x 2160 x 2715 mm

Kondisi: bekas, Tahun pembuatan: 2000, Diameter potong 280 mm Panjang pita gergaji 4930 mm Area potong pada 90 derajat: persegi 280 x 280 mm Area potong pada 45 derajat: bulat 280 mm Area potong pada 45 derajat: persegi 280 x 280 mm Area potong pada 60 derajat: bulat 220 mm Area potong pada 60 derajat: persegi 200 x 200 mm Panjang pengumpanan 600 mm Panjang pengumpanan berulang 5400 mm Njdpfow En Efex Aglokt Kecepatan pemotongan 17 - 90 m/menit Panjang sisa minimum/maksimum min. 30 mm Diameter potong minimum 10 mm Kontrol KASTO, Compact Control Kebutuhan daya total 5 kW Berat mesin sekitar 1,75 t Dimensi mesin P x L x T 2,68 x 2,54 x 1,59 m Aksesori: sistem pendingin, roller conveyor panjang 3300 mm, lebar 300 mm; roller conveyor panjang 1350 mm, lebar 300 mm

Kondisi: diremajakan ulang (bekas), Tahun pembuatan: 2007, Fungsionalitas: berfungsi sepenuhnya, Referencia: LT-2501 Manufacturer: Okuma Model: LB4000EX-MC x 750 Control: Okuma OSP-P200L Year of manufacture: 2007 Keyboard / Software Language: International / Spanish Country of origin: Japan Technical Specifications: Capacity: Swing over bed: Ø 670 mm Swing over carriage: Ø 480 mm Distance between centers: 770 mm Maximum turning diameter: Ø 430 mm Maximum turning length: 750 mm Maximum bar capacity: 90 mm (Requires modification) Main Spindle: Spindle diameter: Ø 160 mm Spindle nose (type): JIS A2-11 Spindle bore: Ø 112 mm Speed ranges: 2 ranges, infinitely variable Spindle speed: 30 – 3,000 rpm Motor: 37 / 30 kW (30 min / continuous) Motor type: PREX Motor Tailstock: Live center: MT 5 Quill stroke (W-axis): 780 mm Rapid traverse: 12,000 mm/min Maximum thrust: 7,500 N Z-Axis: Stroke: 840 mm Cutting feed: 0.001 – 1,000.00 mm/rev Rapid traverse: 30,000 mm/min X-Axis: Stroke: 300 mm Cutting feed: 0.001 – 1,000.00 mm/rev Rapid traverse: 25,000 mm/min C-Axis: Controllable angle: 360° (increment 0.001°) Turret: Type: M-V12 NC Number of tool stations: 12 x BMT40 (L or M) Indexing time: 0.2 sec/position Tool dimensions: External turning: 25 x 25 mm Internal turning: Ø 40 mm Driven Tool: Nsdpfx Agsw Dvb Selskt Rotational speed: 45 – 6,000 rpm Speed range: 1 range, infinitely variable Motor: 7.5 / 4.3 kW (25 min / continuous) Motor type: PREX Motor Dimensions and Weights: Machine height: 1,955 mm Floor space required: 3,050 x 1,900 mm Machine weight: 6,300 kg Included options: Quick-change chuck (3 jaws, Ø 315 mm) SCHUNK ROTA THW plus 315-104 CROMAR chip conveyor Conversational programming (ONE Touch IGF Advanced) Rigid tapping DNC-T1

Kondisi: bekas, Tahun pembuatan: 2004, Cutting diameter: 460 mm Cutting speed: 18 - 115 m/min Cutting width: 460 mm Multiple feed length (single): 650 mm Saw blade dimensions: 6050 x 41 x 1.3 mm Total power requirement: 4.7 kW Machine weight: approx. 2.1 t Space requirement: approx. 2.2 x 1.7 x 2.2 m Automatic bandsaw Nkjdpewz Ru Iefx Aglet - Material feed up to 650 mm, can be done multiple times - Coolant system

Kondisi: baru, Tahun pembuatan: 2025, EN20240617-001 Nsdpfxsv Huggs Aglokt