MEP COBRA 352 NC 5.0 Gergaji
MEP COBRA 352 NC 5.0

Kondisi

Baru

Lokasi

Böblingen

MEP COBRA 352 NC 5.0 Gergaji MEP COBRA 352 NC 5.0

Tampilkan peta

Data mesin

Nama mesin:: MEP COBRA 352 NC 5.0 Gergaji

Pabrikan:: MEP

Model:: COBRA 352 NC 5.0

Kondisi:: baru

Harga & Lokasi

Lokasi:: Otto-Lilienthal-Straße 36, 71034 Böblingen, Deutschland

Hubungi

Rincian penawaran

ID iklan:: A2302534

Pembaruan:: terakhir pada 26.03.2025

Deskripsi

MEP COBRA 352 NC 5.0 [Fully Automatic]

Article Number CB352NC 5.0
Motor Power 2.6/3.5 kW
Vise Opening 180 mm
Band Dimensions 350x32x3.4 mm
Weight 600 kg
Speed 1700/3400 rpm
Cutting Capacity 0° 120 / 105 / 180x70 mm
Cutting Capacity 45° right 120 / 100 / 135x60 mm
Cutting Capacity 45° left
Cutting Capacity 60° right
Cutting Capacity 60° left

Description
Mitre cutting automatic saw with semi-automatic function for cutting aluminium and light metal alloys. Mitre cuts from 45° right to 45° left, with the saw head swivelling 0°-45° to the left.

Control is via multi-microprocessor units, while two NC-controlled axes allow up to 1,000 different cutting programs to be stored, each with variable quantities and lengths, for the same material.

-New centralized control panel on an articulated arm, allowing operation from any working position and immediate access to the emergency stop at all times.
-Fieldbus communication system with dual microprocessor and serial port.
-Display with 20 characters x 4 lines for real-time indication of the following technical parameters: number of programmed and completed cuts, saw blade thickness, feed length, cutting time, ammeter, and over 100 diagnostic messages and warnings.
-New – Alarm and error message logging with event history display. New – 600 mm material feed with drive motor and ball screw, mounted on opposing ball bearings.
-New – Low-voltage control panel: Membrane keypad made of polyester with thermoformed, raised buttons and activation LED.
Iedpfxschkwho Aahetr
-Stroke of saw bow programmable directly from the control panel to adapt to cutting material.
-Ball bearing mounted turntable for easy and precise rotation.
-Clamping system with two front-end vises, positionable along the length of the part.
-Adjustable mechanical stops for rapid head positioning at 0 and 45 degrees both left and right.

For further technical data, please refer to the attached PDF document (page 3 of the catalog excerpt).

Iklan ini diterjemahkan secara otomatis. Kesalahan terjemahan mungkin terjadi.

Dokumen

2302534-01.pdf
2302534-02.pdf

Penyedia

Terdaftar sejak: 2002

156 Iklan online

Hubungi

Kirim permintaan

Telepon & Faks

+49 7033 ... iklan

Iklan-iklan ini juga mungkin menarik bagi Anda.

Iklan kecil

Gergaji bundar untuk logam ringan dan aluminium MEP COBRA 352 NC 5.0

Kanal

10.876 km

Gergaji bundar untuk logam ringan dan aluminium
MEPCOBRA 352 NC 5.0

Hubungi

Kondisi: hampir baru (bekas), Tahun pembuatan: 2017, Used automatic circular saw for aluminium MEP Cobra 352 nc 5.0 Year: 2017 Blade dimensions: 350x32x3.4mm Blade speed: 1700/3400 rpm Mitre angle: from -45° to +45° Cutting capacity at 0°: round: 120mm, square: 105mm, rectangle: 180x70mm Isdpfx Aajwu Tz Rjhstr Touchscreen display Machine weight: 605kg

Lihat detail

Iklan kecil

Wöllstadt

11.158 km

Mesin Autobag C
AutobagAutobag C

€10.500

harga tetap ditambah PPN

Hubungi

Kondisi: hampir baru (bekas), Tahun pembuatan: 2023, Mesin ini dirancang secara khusus untuk perusahaan yang mencari solusi pengemasan yang sederhana dan andal. Kecepatan maksimum mencapai hingga 1500 kantong per jam. Pengoperasiannya sangat mudah, hanya dengan dua langkah sederhana: mengisi kantong dari atas dan menutup kantong. Dijual Autobag-bags dalam ukuran: 150x250: 1,5 juta kantong 200x320: 2,5 juta kantong Harga per palet Euro penuh: 1 palet: €0,025 per kantong 2 palet: €0,019 per kantong 3 palet: €0,018 per kantong 4 palet: €0,017 per kantong 5 palet: €0,016 per kantong dan seterusnya 10 palet atau lebih: €0,01 per kantong Itsdpfxjr E Dpzs Aahsr 1 juta kantong Autobag mulai dari €0,01 per kantong

Lihat detail

Iklan kecil

Aluminium circular saw MEP Cobra 352 NC EVO 5.0

Velen

11.245 km

Aluminium circular saw
MEPCobra 352 NC EVO 5.0

Hubungi

Kondisi: baru, Saw blade diameter: 350 mm Cutting capacity at 90 degrees (round): 120 mm Cutting capacity at 90 degrees (square): 105 mm Cutting capacity at 90 degrees (flat): 180 x 70 mm Cutting capacity at 45 degrees (round): 120/110 mm Cutting capacity at 45 degrees (square): 10/95 mm Cutting capacity at 45 degrees (flat): 135 x 60 mm Motor: 2.5 kW Speed: 1700 / 3400 rpm Machine weight: approx. 600 kg Dimensions (L x W x H): 2.0 x 1.5 x 1.7 m COBRA 352 NC 5.0, automatic circular saw with semi-automatic operation, suitable for cutting aluminium and light metal alloys using carbide-tipped circular saw blades. Itsdjfg Rlgspfx Aahor Miter saw for angle cuts from 45° right to 45° left. The vertical orientation allows for sawing operations with the saw head tilted between 0° and 45° to the left. Numerically controlled circular saw machine with the new Windows CE-based control system, specifically developed by MEP for automatic machines.

Lihat detail

Iklan kecil

Gergaji bundar aluminium MEP - Vollautomat COBRA 352 NC 5.0

Ahaus

11.235 km

Gergaji bundar aluminium
MEP - VollautomatCOBRA 352 NC 5.0

Hubungi

Kondisi: baru, Saw blade diameter 350 x 32 mm Cutting capacity at 90°: round 120 mm Cutting capacity at 90°: square 105 x 105 mm Cutting capacity at 90°: flat 180 x 70 mm Cutting capacity at 45°: round 120 / 110 mm Cutting capacity at 45°: square 100x100 / 95x95 mm Cutting capacity at 45°: flat 135 x 60 mm Spindle speed: 1700 / 3400 rpm Control: MEP CNC Total power requirement: 2.6 / 3.5 kW Machine weight approx.: 605 kg Isdpfxexaa Uxe Aahstr Dimensions (L x W x H): 2210 x 1680 x 2150 mm Equipment: - Fully automatic high-performance CNC circular saw * for cuts from 45° right to 45° left * designed for aluminium and light alloy materials - MEP microprocessor control * Windows “CE” based control system * User-friendly interface * Storage capacity for up to 100 cutting programs * Operator interface with 7” touchscreen display and mechanical keys * Swiveling control panel * Display and storage of alarm and error messages * Saw head positioning and feeder movement via joystick * Automatic detection of cutting start position - Material feed with stepper motor and ball screw drive * Travel: 600 mm * Repeatable for cutting any length - Manually operated safety hood - Mechanical stops at -45°, 0°, +45° * Enable rapid positioning of the saw head - Pneumatic vice system * 2x pneumatic frontal vices * Includes vertical clamp - Heavy cast iron frame for vibration-free operation & highest precision - Saw head can additionally tilt up to 45° - 2 cutting speeds - Base frame with lockable door - Coolant system (emulsion oil lubrication) - Machine base with forklift pockets - Comprehensive operation manual, maintenance handbook, etc.

Lihat detail

Iklan kecil

Mitre melihat UK-600/800 MTI-Maschinenbau UK-600/800

Cochem-Brauheck

11.274 km

Mitre melihat UK-600/800
MTI-MaschinenbauUK-600/800

Hubungi

Tahun pembuatan: 2018, Kondisi: seperti baru (mesin pameran), Mitre saw with a blade diameter of 600 mm (optionally 800 mm) - Manual mitre adjustment - Pneumatic table clamping - Pneumatic workpiece clamping (clamping cylinders’ height and inclination angle continuously adjustable) - Two-hand safety control Itsdpfx Aaod Rhzwohjr Optional features: - Automatic mitre adjustment - Roller conveyor with length stop or positioning system - Automated saw version - Pre-load magazine - Horizontal clamping device - Extraction system - Further accessories available on request We would be pleased to provide you with a quotation tailored to your specific requirements. The machine can be inspected and tested at 56812.

Lihat detail

Iklan kecil

Gergaji pita sepenuhnya otomatis Macc SPECIAL 390 A

Bopfingen

11.072 km

Gergaji pita sepenuhnya otomatis
MaccSPECIAL 390 A

Hubungi

Kondisi: baru, Tahun pembuatan: 2023, Highly Efficient Series Production Clamping – Enter cutting size – Start. Automatic saws with material feed are standard for efficient series processing of bar and bundle material. Maximum cutting capacity up to 290 x 320 mm. Equipment - Automatic hydraulic sawing machine with NC control - For cuts from 0° to 60° to the right, compliant with all CE safety regulations Itsdpfx Aaofww Sqehsr - The unit features 9 programs, each consisting of up to 99 individual steps, for a total of approximately 890 cutting positions, with corresponding piece counter - Functionality includes: material feed, closing of the fixed vise, blade rotation, distribution of emulsion coolant, lowering of the saw frame until the cut is completed, return of the feed carriage to the pre-set position, saw frame reset, and stopping blade rotation by coolant distribution, cycle repetition - Hydraulic feed, cut by cut, without length restrictions - Numerical control of quantity and cutting length - Hydraulic control unit with adjustable cutting pressure - Saw blade tension is monitored electro-mechanically via microswitch - Brush device for band cleaning - Bimetallic blade 3200 x 27 x 0.9 mm - Cutting thickness 1.2 mm - Material feed stroke 600 mm - Hydraulic unit motor 0.75 kW - Electric pump 0.09 kW for band cooling You are welcome to visit and inspect the machine at any time in our production/showroom hall. Please feel free to contact us regarding this. Plantec Maschinen GmbH

Lihat detail

Iklan kecil

Dingin Circular Saw MEP TIGER 372 SX EVO

Velen

11.245 km

Dingin Circular Saw
MEPTIGER 372 SX EVO

Hubungi

Kondisi: baru, Saw blade diameter 370 mm Cutting capacity at 90° (round): 120 mm Cutting capacity at 90° (square): 110 mm Cutting capacity at 90° (rectangular): 180 x 100 mm Working height: 925 mm Blade speed: 15 – 150 rpm Total power requirement: 5.5 kW Machine weight approx. 0.615 t Space requirement approx. 1.4 x 1.4 x 2.0 m Electropneumatic semi-automatic vertical circular saw with microprocessor control for mitre cuts from 60° left to 45° right. Standard equipment: - Saw head glides on ball recirculation linear double guides Itedpfxofg Rldj Aahjr - Three-stage gearbox - Infinitely variable speeds, 15–150 rpm - Vice opening 190 mm - Stroke of the saw head programmable directly from the control panel, adjustable to match the cutting material - Pneumatic vertical vice - HSS DMO 5 saw blade, Ø 370x32x3 mm for solid and profile material - Vice with counter-hold device for double workpiece clamping - Base frame with removable coolant tray - Chip removal brush - Length stop for identical length cuts - Material support arm, also with connection option for roller conveyor/loading side

Lihat detail

Iklan kecil

Dingin Edaran penggergajian - otomatis BERG & SCHMID VKS 370 VA CNC

Velen

11.245 km

Dingin Edaran penggergajian - otomatis
BERG & SCHMIDVKS 370 VA CNC

Hubungi

Kondisi: baru, Saw blade diameter: 370 mm Cutting range at 90 degrees: round 120 mm Cutting range at 90 degrees: square 100 mm Cutting range at 90 degrees: rectangular 180 x 100 mm Working height: 925 mm Saw blade speed: 17 - 70 rpm Total power requirement: 3.0 kW Machine weight approx.: t Space requirement approx.: 1.9 x 1.45 x 2.1 m SPECIAL OFFER PRICE!!! High-performance vertical circular saw, hydropneumatic fully automatic. (20195) · Miter cut left 60° / right 45° · Hydro-pneumatic control of the saw unit · Electro-pneumatic material feed unit · Smooth-running, powerful worm gear drive with large reduction ratio, integrated in a sturdy cast housing for optimal cutting results · Vice with double clamping arm for burr-free cuts, additionally with lateral quick-change for miter adjustment · Precision prism guide of the gearbox head, laterally adjustable · Particularly robust base frame with built-in cooling system · Large chip drawer · Chip removal brush integrated in the saw blade guard CNC control: Itsdpfed Iin Ejx Aahjr · With control panel for over 90 different sawing programs with 99 sub-programs for length, quantity, and angle · Automatic feed unit 2,000 mm via ball screw spindle; incremental feed with automatic length compensation. Adjustable for cut lengths from 25 to 9,999 mm. · Fully hydraulic control of the saw frame and clamping fixtures · Pre-selection of 3 different material feed speeds · Visualization of the entire work process with simple data entry ATTENTION: Price does not include saw blade! (Saw blade price: 204 EUR)

Lihat detail

Iklan kecil

Lini produksi kapsul kopi NESPRESSO ARBURG 720A300-800 / 70

Rheinfelden

11.288 km

Lini produksi kapsul kopi NESPRESSO
ARBURG720A300-800 / 70

Hubungi

Tahun pembuatan: 2017, Kondisi: hampir baru (bekas), Lini produksi pembuatan kapsul kopi NESPRESSO Terdiri dari komponen-komponen berikut: Pos. 01) Cetakan injeksi untuk kapsul, produsen: FOSTAG AG 1,0 unit cetakan dengan 16 rongga 1,0 unit cetakan dengan 32 rongga Pos. 02) Mesin cetak injeksi dua komponen, Produsen: ARBURG, Tipe: 720A3200-800, Tahun pembuatan: 2017 Pos. 03) Sistem pengambilan kapsul 16 rongga, produsen: Beck, tahun pembuatan: 2019 Isdpfx Aaew Nriuehjtr Pos. 03) Sistem pengambilan IML untuk kapsul 32 rongga, produsen: Beck, tahun pembuatan: 2019

Lihat detail

Iklan kecil

Unit gergaji TMA 60 dengan pendorong Plantec TMA 60 mit Pusher

Bopfingen

11.072 km

Unit gergaji TMA 60 dengan pendorong
Plantec TMA 60 mit Pusher

Hubungi

Kondisi: baru, Tahun pembuatan: 2024, tekanan: 8 batang, Mitre adjustment horizontal 15°-90°-15°, infinitely variable. Saw motor 5.50 kW (400 Volt). Saw blade 600 mm. Fence travel range at the rear 180 mm. Working height adjustable from 940 to 1000 mm via adjustable feet. 2 extraction ports (top of hood and bottom). Net weight 600 kg. Dimensions WxDxH 135x140x150 cm. RAL 9007 Grey Aluminium. Turntable made of ground nickel steel. Saw head with recirculating ball guides, designed for high precision, durability, and rigidity. Material can be pre-clamped with low pressure when the hood is open. Hydropneumatic blade feed. Chip flow directed toward extraction hood. Equipment: • Precision under-table circular saw • Mitre angle adjustment 0º/45º/90º/-45º/-60º, stepless • Includes 2 pneumatic clamps (vertical) • Infinitely adjustable saw blade feed • Two-hand safety control • Adjustable material stop (rear) • Chip extraction system • Spray mist device for air-oil cooling • Air gun with spiral hose • Maintenance unit with pressure reducer included • Ergonomically arranged control panel • Max. cutting height 230 mm • Saw blade 600 mm • Saw blade not included in delivery! Our NC pushing system ensures that your workpieces are positioned at the desired processing point on our UK 600 HA 90°. A gripper clamps the material, and the NC control automatically positions it. Afterwards, clamping and the sawing process are initiated. Positions are pre-programmed into the control system. Once the machine finishes the operation, it automatically moves to the next sawing position. Depending on the workpiece, several parts can be clamped and positioned simultaneously, either stacked or side by side. You are welcome to visit and inspect the desired system at our production or demonstration hall at any time. Please feel free to contact us. Itedpfx Asgwt S Teahsr Plantec Maschinen GmbH

Lihat detail

Beriklan di sini