Gergaji pita

MEP PH 211-1 HB

Kondisi: baru, Cutting capacity at 90 degrees: round 240 mm Cutting capacity at 90 degrees: square 240 mm Cutting capacity at 90 degrees: rectangular 165 x 310 mm Saw blade length: 2725 x 27 x 0.9 mm Table height: 890 mm Blade speed: 35 / 70 m/min Total power requirement: 1.1 kW Machine weight approx. 0.35 t Dimensions (LxWxH): 1.7 x 0.75 x 1.8 m The Z252/DG is equipped with the following features: - Hydraulic cylinder - Coolant pump - Eccentric vice - Base frame Cgedpfshpktvjx Ag Djt - Saw blade - 400V plug -16A- The machine is delivered fully assembled and ready for immediate operation.

Kondisi: baru, Tahun pembuatan: 2024, ketinggian potong (maks.): 150 mm, Rentang pemotongan baja bulat pada 45°: 108 mm, Rentang pemotongan baja bulat pada 90°: 108 mm, BERG+SCHMID Dual Mitre Bandsaw GBS 218 Eco AutoCut Cutting speed: 25–80 m/min • Mitre cutting left up to 60° • Suitable for cutting steel, stainless steel, and aluminum profiles Cedpfxjt I R Edj Ag Degt • Quick-release vise with rapid clamping system • Integrated blade tension control • Carbide blade guides • Electric coolant system • Machine base (supplied disassembled) The AutoCut system includes: • Hydraulic cylinder, feed control, spring pack, and limit switch, allowing for three operating modes: 1. Automatic saw frame lowering via hydraulic cylinder with steplessly adjustable feed control valve and limit switch at the end of the cut 2. Rapid lowering of the saw frame from home position to the workpiece, then switching to normal cutting feed 3. Manual operation – hydraulic cylinder functions as a braking cylinder Blade dimensions: 2455 x 27 x 0.9 mm Additional accessories such as saw blades, roller conveyors, measuring stops, and minimum quantity lubrication available on request! Delivery time: ex stock Waiblingen Beinstein

Kondisi: baru, Cutting diameter 225 mm Saw band length 2480 mm Cutting width 250 mm Cutting speed 45 / 90 m/min Saw band dimensions 2480 x 27 x 0.9 mm Cutting capacity at 45 degrees: flat 135 x 185 - 145 x 150 mm Cutting capacity at 45 degrees: round 150 mm Cutting capacity at 45 degrees: square 145 mm Cutting capacity at 60 degrees: flat 63 x 107 - 69 x 90 mm Cutting capacity at 60 degrees: round 70 mm Cgodpfx Aslb I Dasg Det Cutting capacity at 60 degrees: square 70 mm Cutting capacity at 90 degrees: flat 240 x 160 - 250 x 110 mm Cutting capacity at 90 degrees: round 225 mm Cutting capacity at 90 degrees: square 185 mm Total power requirement 0.75 / 1.1 kW Machine weight approx. 200 kg Space requirement approx. 1385 x 580 x 890 mm Technical features: - Hydraulic system for controlling the saw head descent - End switch at the end of the cut - Powerful three-phase induction motor with 2 speeds and oil-bath gearbox - Saw bow, vise and pivoting assembly made of cast steel - Steel saw band guide with ball bearings - Quick-release vise - Front integrated lever for locking the miter adjustment - Coolant pump with aluminum body - Large handwheel for easy saw band tensioning - Pressure gauge for displaying band tension (600-1000 kg/cm3) - Emergency stop safety switch - Chip brush for cleaning the saw band STANDARD EQUIPMENT: - Mountable base cabinet - Coolant tank - Electric coolant pump - Length stop for serial cuts - Tools for band replacement and adjustments - Chip removal brush - Hydraulic cylinder with feed adjustment

Kondisi: baru, Cutting diameter: 170 mm Bandsaw blade dimensions: 2080 x 20 x 0.9 mm Table height: 880 mm Cutting speed: 40 + 80 m/min Cutting capacity at 90° round: 170 mm Cutting capacity at 45° round: 125 mm Cutting area at 90° rectangular: 150 x 190 mm Cutting area at 45° rectangular: 95 x 120 mm Total power requirement: 1.1 kW Machine weight approx.: 0.24 t Dimensions (L x W x H): 870 x 1,550 x 1,740 mm Cgsdpfx Agjg Trvrj Djt This metal bandsaw is equipped with an enclosed worm gear drive. Additionally, it features hydraulic pressure regulation and a base frame rotatable by 45 degrees. Other features include emergency stop, a complete cooling system, the factory base frame, automatic shut-off, and a quick-release device.

Kondisi: baru, The SBS 255 is a powerful, semi-automatic band saw from the category of horizontal miter band saws, notable for its compact design and versatile features. With its stable, side-shifting vise and robust saw bow made of cast iron, which can pivot up to 60° to the right and 45° to the left, the SBS 255 enables precise cuts in various workpiece sizes. The machine’s high-performance motor is engineered for continuous operation, while the combination of carbide jaw inserts and adjustable ball bearing guides ensures a high degree of cutting precision. The efficient coolant system and quiet operation increase productivity, especially when processing small batches. You can benefit from the SBS 255’s user-friendly design and easy handling to complete your tasks efficiently. This machine, which comes equipped with comprehensive standard accessories such as a saw blade and base frame, is an ideal choice for your workshop. If you are interested in the SBS 255, you can request a quotation now. Cgsdpfsuyiqdex Ag Det

Kondisi: bekas, Tahun pembuatan: 2011, de2huitltlvnbnlpl-001 Cgodpfx Agowkvq Hj Det

Kondisi: baru, Cutting range: Round 0°: 270 mm Square 0°: 260 x 260 mm Flat 0°: 320 x 260 mm Round 45° R: 230 mm Square 45° R: 220 x 220 mm Flat 45° R: 230 x 150 mm Round 60° R: 140 mm Square 60° R: 140 x 140 mm Round 45° L: 200 mm Square 45° L: 175 x 175 mm Flat 45° L: 220 x 150 mm Cutting speed: 40 / 80 m/min Saw blade: 2925 x 27 x 0.9 mm Working height: 975 mm Coolant pump: 100 W Saw motor: 1.9 kW Voltage: 400 V Dimensions (LxWxH), approx.: 2000 x 1300 x 2000 mm Weight, approx.: 550 kg Features: - Double miter saw with pivoting saw bow from left -45° to right +60° - Ideal for machining pipes, profiles, as well as solid materials made of stainless steel, iron, etc. in industrial applications - Generously dimensioned cast saw arm for low-vibration operation - Two band speeds for optimal adaptation to the workpiece - Hydraulic lowering cylinder - Quick-release vice for fast and easy workpiece clamping - Precise, adjustable blade guides for optimal cutting results - CE/IEC compliant, German documentation and service Scope of delivery: - Bi-metal saw band 2925 x 27 x 0.9 mm - Blade tension adjustable via manometer - Carbide blade guides Cgjdpfx Aeiqt Rlog Dot - Quick-release vice - Material stop - Coolant system with pump - Hydraulic lowering cylinder - Motor protection switch - Automatic shut-off after completion of cut - Machine base

Kondisi: baru, Tahun pembuatan: 2025, Fungsionalitas: berfungsi sepenuhnya, jenis arus masuk: Arus searah (DC), lebar total: 370 mm, panjang total: 180 mm, tinggi total: 190 mm, tegangan masuk: 230 V, kecepatan rotasi (maks.): 5.300 rpm, berat keseluruhan: 10 kg, frekuensi input: 50 Hz, masa garansi: 12 bulan, daya: 0,18 kW (0,24 hp), diameter penggilingan: 13 mm, Grinding of drills with a diameter from 2 mm to 13 mm Adjustable angle ----- 90 and 135° Grinding speed ----- 5300 rpm Grinding wheel ----- CBN 200 Motor ----- 230V/1Ph/180W Weight ----- 10 kg Csdpfx Agega T D To Dsgt

Kondisi: baru, Tahun pembuatan: 2026, CORMAK HBS260 band saw for cutting pipes, profiles, and rods is widely used in all locksmith workshops where precision, quality, and cutting speed matter. This model features a swiveling arm 0-60°. The frame design ensures accurate and quiet operation. It has a removable chip tray for easy cleaning! Machine characteristics: The CORMAK HBS260 is a horizontal metal band saw with a swiveling arm, enabling cutting perpendicular to the axis of the material or at any angle from 0 to 60°. Material can be fed manually or by any mechanical means, while the tool feed operates automatically. The blade guides are equipped with special carbide plates and bearings, significantly enhancing blade guidance, longevity, straightness, accuracy, and cut quality. Carbide blade guides greatly reduce machine and blade wear. The unit is equipped with a high-performance coolant pump with a closed-loop coolant system. The saw arm is made from a solid cast-iron piece, paired with a 27 mm wide blade, allowing for efficient high-volume cutting of both profiles and solid materials. The vice is mounted on an adjustable base and features quick clamping. The blade guides utilize hard metal (carbide) plates and a rolling bearing system. It is the CARBIDE BLADE GUIDES that are responsible for the saw’s precision and straightness. The upper part of the base is shaped to form a tray for collecting coolant and chips generated during cutting. Attached to the base is a cast iron worktable with a swiveling arm and a control panel mounted on a separate arm. During cutting, the main cutting movement is provided by the moving blade, while the feed is controlled by the arm's descent. The descent speed of the arm (cutting speed) is adjustable using a hydraulic cylinder. Feed speed is controlled from the saw’s control panel. Two blade speeds are available: 35 and 70 m/min. In the lower position of the arm (after cutting is complete), the blade drive is automatically switched off. Safety is ensured by blade covers and micro-switches that stop the motor after the cutting cycle is finished or when any of the covers are opened. Additional protection includes an automatic stop in case the blade breaks. Blade size [mm]: 2520 x 27 x 0.9 Blade tension: mechanical (manual) Blade speeds [m/min]: 35, 70 Arm descent control: stepless, hydraulic cylinder Vice base height [mm]: 860 Saw wheel diameter [mm]: 300 Saw frame swivel [°]: 0-60 Power supply: 3-phase, 400V Main motor power [kW]: 1.1 / 1.5 Coolant pump motor power [kW]: 0.05 Dimensions with base [cm]: 150 x 80 x 140 Weight [kg] (gross/net): 210 / 180 kg Accessories included: 2 x M42 saw blades Cgedpjudi Uzsfx Ag Dot 5L Emulgol coolant ZW580 magnetic chip collector

Kondisi: sangat baik (bekas), Tahun pembuatan: 1997, Fungsionalitas: berfungsi sepenuhnya, Weiler centre lathe model Condor B, lead and feed screw lathe with 3-axis digital readout from K&C, NEW, CE compliant!! Technical data: - Machine no.: 2442, year of manufacture: 1997 - Centre height: 165 mm - Centre distance: 750 mm - Spindle speeds: from 22 to 2800 rpm - Spindle bore: 40 mm - Short taper spindle nose DIN 55027 size 5 with bayonet lock - Tailstock: Morse taper 3 - Feeds: from 0.015 to 0.46 mm/rev - Thread cutting: metric, inch, module, and diametral pitch - Metric pitch range: 0.18 to 28 mm - Weight: approx. 1100 kg - Spindle brake, switchable - Length: 1.83 m, Height: 1.29 m, Depth: 0.88 m Accessories and features: - 3-axis digital readout by K&C, new, 12 months manufacturer's warranty, operating manual included Functions: mm/inch switch, coordinate selection ABS/INC, value halving, reference mark, tool programming for 200 tools, taper calculation, radius/diameter display, quick zeroing, counting direction switch, etc. - 1 pc. new 3-jaw chuck, 160 mm, incl. 2 sets of jaws - 1 pc. 4-jaw chuck, 200 mm, incl. 1 set of jaws - Collet chuck unit, NEW, and collets NEW, range 3 to 25 mm in 1 mm increments - Multifix toolpost size B, with 2 steel holders - Bed stop - Electronic spindle protection - Rear splash guard - Machine feet For safety: electronic spindle protection, 2 emergency stop buttons, change gear cover with limit switch, spindle brake Cgjdpfx Agjxcuazo Djt About this machine: Offered here is a Weiler Condor in very good condition. The machine is, of course, fully functional. A very robust and high-performance machine. The new 3-axis digital readout from K&C makes operation even easier and more precise. The machine has been electrically and mechanically tested by us. A complete oil change has been carried out. This newer generation of Weiler lathes is highly user-friendly. Take the opportunity to view and test the machine under power on site.