Bandsaw - horizontal

MEP Shark 281 CCS

Kondisi: baru, 1 Gbedpjyvvqkefx Alkjl

Kondisi: baik (bekas), Brand: Ercolina Model: CE40H3 Year of manufacture: 2006 Hydraulically driven Roller diameter: Ø 165 mm Shaft diameter: Ø 40 mm Tube capacity (thin-walled): Ø 70x1.5mm, minimum bending radius Ø 700 mm Tube capacity (thick-walled): Ø 2" x 3.2 mm, minimum bending radius Ø 450 mm Angle bar capacity: 50x50x6 mm, minimum bending radius Ø 400 mm Flat bar capacity: 50x10 mm, minimum bending radius Ø 250 mm Gbedpow Hx Tvjfx Alkjl Flat bar capacity (on edge): 100x15 mm, minimum bending radius Ø 250 mm Box section capacity: 50x50x3 mm, minimum bending radius Ø 500 mm Shaft capacity: Ø 35 mm, minimum bending radius Ø 250 mm Motor power: 1.85 kW Bending speed: 10 rpm

Kondisi: baru, Model designation Gbsdpfx Alegvkchoksl Shark 281 CCS

Kondisi: baru, Cutting diameter: 250 mm Cutting capacity at 90° (flat): 280 x 200 mm Cutting capacity at 90° (square): 230 x 230 mm Cutting capacity at 45° (round): 190 mm Cutting capacity at 45° (flat): 180 x 180 mm Cutting capacity at 45° (square): 180 x 180 mm Cutting capacity at 60° (flat): 110 x 110 mm Cutting capacity at 60° (square): 110 x 110 mm Cutting capacity at 60° (round): 120 mm Vice width: 285 mm Speed range: 36 / 72 m/min Saw blade dimensions: 2,950 x 27 x 0.9 mm Total connected load: 1.5 / 1.8 kW Machine weight: approx. 370 kg Space requirements: approx. 1,620 x 1,360 mm Equipment: - Robust electro-hydraulic bandsaw (INDUSTRIAL) - Single-sided mitre cut up to 60° - Automatic saw bow lowering with infinitely variable feed adjustment - Cut-off switch at end of cut - Manual cutting function selectable - 2x saw blade speeds - Saw blade guide made of carbide plates - 1x saw blade - 1x angle stop - Rotating swarf removal brush - Control panel located at front right - Hydraulic pressure accumulator for saw blade tensioning with analogue pressure gauge (manometer) - Machine base - Operating manual in German Gsdpfsxaa H Iox Alkjbl SPECIAL ACCESSORIES INCLUDED: - MEP LubeCut micro-dosing system

Kondisi: baik (bekas), Manufacturer: OMERA Model: R4 / 12-2 Year of manufacture: 1976 Table length: 1900 mm Table width: 1000 mm Horizontal throat depth (steady arm): 670 mm Vertical throat depth (steady arm): 940 mm Cylinder stroke: 350 mm Column diameter: 200 mm Specifications Metric US Standard There are currently no specifications available for this machine. Dimensions (approximate) Length: 3000 mm Width: 2200 mm Height: 2500 mm Gjdpfjkvnumex Alkobl Weight: 2800 kg Please note: The information on this page has been provided by us to the best of our knowledge and, where possible, obtained from the manufacturer. The information is given in good faith, however, accuracy cannot be guaranteed. Therefore, these details do not represent warranty or binding contractual terms. We recommend verifying all critical details.

Kondisi: baru, Cutting diameter: 250 mm Saw blade length: 2950 mm Cutting width: 280 mm Saw blade dimensions: 2950 x 27 x 0.9 mm Cutting range at 90°: flat 280 x 200 mm Cutting range at 90°: square 230 mm Cutting range at 45°: round 190 mm Cutting range at 45°: flat 180 x 180 mm Cutting range at 45°: square 180 mm Cutting range at 60°: round 120 mm Cutting range at 60°: flat 110 x 110 mm Cutting range at 60°: square 110 mm Gsdjxz Hhzepfx Alkobl Total power requirement: 1.5 / 1.8 kW Machine weight approx. 0.4 t High-performance mitre band saw for cuts from 0° to 60° to the left CCS (CutControlSystem) for automatic cutting (Infinitely adjustable feed and automatic shutdown at the end of the cut) Description: - Manual cutting cycle - AUTOMATIC CUTTING: (via selector switch) with stepless adjustment of lowering speed and setting of cutting pressure via compensating spring - Sturdy, torsion-resistant and low-vibration saw frame made of cast steel - Quick-release vice - Carbide blade guides for maximum cutting precision - Large, adjustable cast steel band wheels - Hydraulic unit for saw blade tensioning and monitoring with display on manometer (blade tension = 900 kg) - Clearly arranged control panel with all operating elements - Electric coolant pump for cooling and lubricating the saw blade - Chip removal brush for cleaning the saw blade

Kondisi: baru, Bernardo Horizontal Bandsaw HBS 275 - 400 V Technical Specifications Cutting area round 90°: 225 mm Cutting area square 90°: 200 x 200 mm Cutting area flat 90°: 245 x 150 mm Cutting area round 45°: 160 mm Cutting area square 45°: 160 x 160 mm Cutting area round 60°: 100 mm Cutting area square 60°: 100 x 100 mm Working height: 910 mm Saw blade dimensions: 2480 x 27 x 0.9 mm Cutting speeds (400 V): 45 / 90 m/min Coolant pump S1 100%: 100 W Gbodpfxed Du T Io Alkel Motor output S1 100%: 1.1 kW Motor input power S6 40%: 1.5 kW Voltage: 400 V Machine dimensions (L x W x H): 1430 x 720 x 1700 mm Weight approx.: 190 kg Scope of delivery: • Saw blade • Workpiece stop • Base frame • Manometer for blade tension • Vice with quick-release • Coolant system • Hydraulic lowering cylinder • Motor protection switch • Automatic shut-off

Tahun pembuatan: 2013, Kondisi: siap digunakan (bekas), - GEBRAUCHT - FASERLASERSCHNEIDMASCHINE MIT PALETTENWECHSLER UND BE- / ENTLADESYSTEM X-ACHSEN-VERFAHRWEG: 3.270 mm Y-ACHSEN-VERFAHRWEG: 1.550 mm Z-ACHSEN-VERFAHRWEG: 100 mm BEARBEITUNGSBEREICH: 3.070 x 1.550 mm Gedpfx Aljvhc S Hjkjbl ZULÄSSIGE BELADUNG AUF DEM TISCH: 920 kg LASERQUELLE: AJ2000 Fiber; 2.000 W STEUERUNG: AMADA AMNC3i GEWICHT: 11.200 kg ABMESSUNGEN (LxBxH): 10.028 x 2.900 x 2.000 mm ANMERKUNG: MIT LADESYSTEM/ENTLADESYSTEM LKI 3015FLC-AJ BAUJAHR 2013; AUTOMATISCHER DÜSENDWECHSEL

Kondisi: bekas, Tahun pembuatan: 2007, Working width 1380 mm Workpiece height 70 mm Total power requirement 45 kW Machine weight approx. 5,500 kg E R N S T Automatic sheet metal deburring machine with wet grinding unit Type EM 5 N/II/L + 2 B/1400 Year of manufacture 2007 Serial no. 780063 _____ Grinding width approx. 1,380 mm Roller width 1,400 mm Max. workpiece height 1 - 70 mm Continuously adjustable feed speed approx. 1.5 - 8 m/min Comprising 5 working units: Oscillating sanding roller for use with abrasive cloth (abrasive fleece) Ø 450 mm, 1,400 mm wide x 1,540 long, with pneumatically adjustable belt tension, 11 kW drive Brush roller unit with two counter-rotating brush roller shafts Ø 350 mm, drive 2 x 5.5 kW, abrasive flap wheels or non-woven abrasive, adjustable for wear. Brush roller unit to accommodate 2 rollers Ø 250 mm, drive 2 x 5.5 kW, rollers adjustable via hand wheel, also ideal for removing oxide layers. Wet grinding unit with belt filter and closed water circuit, installed under the transport belt and easily extendable from the machine. Washing and drying device, designed for a minimum workpiece length of 80 mm, water and air supply adjustable, etc. Workpiece transport is front-sided via a continuous conveyor belt (minimum part length 350 mm) with a vacuum suction system over a width of 300 mm on the right as well as a magnetic belt with a width of 300 mm, for holding small parts down to a minimum length of 80 mm. Frequency inverter for stepless speed adjustment of the abrasive flap brushes from 250 – 1,000 rpm (position 2 top), as well as for the conveyor feed. Control panel with clear controls and digital readout of roller adjustment, 4 ammeters for monitoring roller drives, control LEDs. Quick-change facility for lateral removal of abrasive flap brushes, as well as various spare rollers with abrasive fleece and brush fittings. Total drive approx. 45 kW – 400 V – 50 Hz Weight approx. 5,500 kg Condition: good to very good Delivery: ex stock – as inspected Payment: strictly net – upon receipt of invoice Gbedet Hw Iiepfx Alkel

Kondisi: sangat baik (bekas), Tahun pembuatan: 2002, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 540 mm, jarak lintasan sumbu Y: 240 mm, kecepatan spindel (maks.): 1.650 rpm, kecepatan spindel (min.): 45 rpm, penjepit spindle: MK 4, kedalaman tenggorokan: 350 mm, gores kuas bulu: 130 mm, panjang total: 1.250 mm, tinggi total: 1.900 mm, lebar meja: 225 mm, lebar total: 1.100 mm, panjang meja: 800 mm, kapasitas pengeboran: 40 mm, hidung spindel: MK-4, daya nominal: 2,2 kW (2,99 hp), Drilling/milling machine, drilling capacity Ø 40 mm, 2-speed motor 1.9/2.2 kW, table size 800x225 mm, spindle speed 45-1650 rpm stepless via variator, MK 4, machine lamp, motorized table elevation, automatic feed, fine adjustment, depth stop, coolant system, dimensions 1250x1100x1900 mm, weight approx. 600 kg Gedpfx Aewt Swzolkebl