Gergaji pita horizontal - manual - rentang pemotongan putaran 221-299mm

MEP Shark 281 CCS

Kondisi: baru, Cutting diameter: 250 mm Saw band dimensions: 2950 x 27 x 0.9 mm Table height approx. 800 mm Band speed: 36/72 m/min Total power requirement: 1.5/1.8 kW Machine weight approx. 0.37 t Space required approx. ... m MEP Sawing Machine: Saw bow, vice assembly, and base made from robust cast iron Precision angle markings on the cast iron frame Electrical system (with fully identifiable wiring and 24 V low voltage circuit) Control handle IP 55 for manual cycles (if available) Rotating cleaning brush for the saw band Quick-clamping assembly with vice for rapid positioning Accurate end stops with adjustment for mitre cuts at 0°, 45°, 60° to the left Bi-metal saw blade 2950 x 27 x 0.9 mm Tools, operating instructions, and spare parts ordering guides in the user’s language Ljdpfefg E H Ijx Adqoah SHARK 281 with manual operation and SHARK 281 CCS with manual operation and automatic cutting via gravity-fed head advance. CCS (Cut Control System) with (A) switch for manual and automatic cutting – (B) speed adjustment – (C) hydraulic brake with reservoir – (D) end stop for halting the blade, also available as retrofit for existing machines. Quick-clamping vice Hydraulic tension display for blade tensioning Electric coolant pump for lubrication and cooling of the saw band, with accessible coolant tray located above the base frame For versions with pneumatic vice (MA), the opening and closing is operated by a manual valve (optionally available with foot pedal control).

Kondisi: baru, Cutting diameter: 250 mm Cutting capacity at 90° (flat): 280 x 200 mm Cutting capacity at 90° (square): 230 x 230 mm Cutting capacity at 45° (round): 190 mm Cutting capacity at 45° (flat): 180 x 180 mm Cutting capacity at 45° (square): 180 x 180 mm Cutting capacity at 60° (flat): 110 x 110 mm Cutting capacity at 60° (square): 110 x 110 mm Cutting capacity at 60° (round): 120 mm Vice width: 285 mm Speed range: 36 / 72 m/min Saw blade dimensions: 2,950 x 27 x 0.9 mm Total connected load: 1.5 / 1.8 kW Machine weight: approx. 370 kg Space requirements: approx. 1,620 x 1,360 mm Equipment: - Robust electro-hydraulic bandsaw (INDUSTRIAL) - Single-sided mitre cut up to 60° - Automatic saw bow lowering with infinitely variable feed adjustment - Cut-off switch at end of cut - Manual cutting function selectable - 2x saw blade speeds - Saw blade guide made of carbide plates - 1x saw blade - 1x angle stop - Rotating swarf removal brush - Control panel located at front right - Hydraulic pressure accumulator for saw blade tensioning with analogue pressure gauge (manometer) - Machine base Ledpfx Ajxaa H Ijdqjah - Operating manual in German SPECIAL ACCESSORIES INCLUDED: - MEP LubeCut micro-dosing system

Kondisi: baru, MEP SHARK 281 CCS metal band saw with semi-automatic lowering. Article number: SH281CCS Motor power 1.5/1.8 kW Vice opening 285 mm Blade dimensions 2950x27x0.9 mm Weight 375 kg Band speed 36/72 m/min Cutting capacity at 0° 250 / 230x230 / 280x200 mm Cutting capacity at 45° right 190 / 180x180 / 180x180 mm Cutting capacity at 45° left - Cutting capacity at 60° right - Cutting capacity at 60° left - Description: - Saw bow, vice assembly, and base made of high-strength cast iron - Precision angle marking on the cast iron frame - Electrical system (with fully identifiable wiring and 24V low-voltage system) - IP 55 control handle for manual cycles (if applicable) - Rotating chip brush for the saw blade - Quick-approach vice closure system - Precise stops with angle cutting adjustment at 0°, 45°, 60° left - Bi-metal saw blade 2950 x 27 x 0.9 mm - Tools, instructions for use, and spare parts ordering guide in the user's language - SHARK 281 with manual operation and SHARK 281 CCS with manual operation and automatic feed cut via gravity. - CCS (Cut Control System) with (A: switch for manual and automatic cut – B: adjustable cutting speed – C: hydraulic brake with reservoir – D: end stop for band shutoff), also available as an option for machines already in service. - Quick-adjust vice - Hydraulic transducer for displaying blade tension - Electric coolant pump for blade cooling and lubrication, with accessible coolant tray above the machine base - For models with pneumatic vice (MA), opening and closing is via manual valve (optional foot pedal available) MEP SHARK 281 SXI evo [Semi-automatic] Article number SH281SXI Motor power 1.5/1.8 kW Vice opening 285 mm Blade dimensions 2950x27x0.9 mm Weight 435 kg Band speed 36/72 m/min Cutting capacity at 0° 250 / 230x230 / 280x200 mm Cutting capacity at 45° right 190 / 180x180 / 180x180 mm Cutting capacity at 45° left - Cutting capacity at 60° right - Cutting capacity at 60° left - Description Semi-automatic function: Vice closes and motor starts, saw head descends for the cut, motor shuts off, saw head raises, vice opens. Features include: Lajdpfx Adocgbp Ijqeh - New centralized control console on articulated arm. - Latest-generation hydraulic control unit: highly efficient and low energy consumption. - Base with removable coolant tank. Machine in full compliance with all CE regulations! For further technical data, please refer to the attached PDF document.

Kondisi: baru, Cutting diameter: 250 mm Saw blade length: 2950 mm Cutting width: 280 mm Saw blade dimensions: 2950 x 27 x 0.9 mm Cutting range at 90°: flat 280 x 200 mm Cutting range at 90°: square 230 mm Cutting range at 45°: round 190 mm Cutting range at 45°: flat 180 x 180 mm Cutting range at 45°: square 180 mm Cutting range at 60°: round 120 mm Cutting range at 60°: flat 110 x 110 mm Cutting range at 60°: square 110 mm Total power requirement: 1.5 / 1.8 kW Machine weight approx. 0.4 t High-performance mitre band saw for cuts from 0° to 60° to the left CCS (CutControlSystem) for automatic cutting (Infinitely adjustable feed and automatic shutdown at the end of the cut) Description: - Manual cutting cycle Ljdpsppgddsfx Adqeah - AUTOMATIC CUTTING: (via selector switch) with stepless adjustment of lowering speed and setting of cutting pressure via compensating spring - Sturdy, torsion-resistant and low-vibration saw frame made of cast steel - Quick-release vice - Carbide blade guides for maximum cutting precision - Large, adjustable cast steel band wheels - Hydraulic unit for saw blade tensioning and monitoring with display on manometer (blade tension = 900 kg) - Clearly arranged control panel with all operating elements - Electric coolant pump for cooling and lubricating the saw blade - Chip removal brush for cleaning the saw blade