Bandsaw - Horizontal

MEP SHARK 281 SXI EVO

Kondisi: baru, Model designation Ndjdpfsgvkglsx Aahjf Shark 281 SXI evo

Kondisi: baru, Tahun pembuatan: 2025, Quick mitre adjustment from 30° to 150° steplessly with 0.5° accuracy according to scale. The mitre pivot point is the intersection between the saw blade and the material support, which means there is no change in length measurement. Stops at 30° and 45° on both left and right sides. Ndsdpfx Aaobi S Diehof Manual material clamping. At any frame angle, the material is clamped parallel at 90°. Cutting pressure reduction via the dead weight of the robust, torsion-resistant saw frame and fine adjustment based on material cross-section through hydraulic damping cylinder. Standard built-in coolant system, optionally upgradable with a micro-dosing unit. Machine stand with integrated chip collection tray. Saw blade drive with automatic shut-off. Precise saw blade carbide roller guide. Paint finish in silver-grey / blue-grey (RAL 7001 / RAL 7031). 1 saw blade mounted on the machine, 4/6 TPI. Operating manual and spare parts list supplied on CD-ROM. Optional equipment: Hydraulic lifting of the saw frame. Design: Manual Mitre Cutting Capacities: 30° left: Ø 130 mm; square 120x120 mm 45° left: Ø 200 mm; square 180x180 mm 90°: round Ø 260 mm; square 300x260 mm 45° right: Ø 200 mm; square 180x180 mm 30° right: Ø 130 mm; square 120x120 mm Motor: [kW] 1.8 Saw blade: [mm] 3350x27x0.9 Blade speed: 35/75 m/min Working height: [mm] 900

Kondisi: baru, Cutting diameter: 250 mm Cutting range at 90 degrees: flat 280 x 200 mm Cutting range at 90 degrees: square 230 x 230 mm Cutting range at 45 degrees: round 190 mm Cutting range at 45 degrees: flat 180 x 180 mm Cutting range at 45 degrees: square 180 x 180 mm Cutting range at 60 degrees: round 120 mm Cutting range at 60 degrees: square 110 x 110 mm Cutting range at 60 degrees: flat 110 x 110 mm Vice: 285 mm Blade speed range: 36 + 72 m/min Saw blade dimensions: 2950 x 27 x 0.9 mm Control: MEP NC Coolant tank capacity: 95.0 l Total power requirement: 1.5 / 1.8 kW Machine weight: approx. 435 kg Space requirements: approx. 1000 x 2000 mm Equipment: - Robust electro-hydraulic semi-automatic bandsaw (INDUSTRIAL) - Miter cuts up to 60° - MEP microprocessor control EVO for monitoring all functions * positioned front right, rotatable Nsdpfx Aew U U Uweahedf - Optional manual or automatic lowering of the saw bow * infinitely variable adjustment of the saw bow descent - Saw blade guide made from carbide inserts - Hydraulic saw blade tensioning with digital value display - 2x blade speeds - 1x bi-metal saw blade - Coolant system - 1x angle stop - Chip removal brush - Machine base with forklift slots - Operating manual in German Semi-automatic operation functionality: - Electro-hydraulic clamping of the vice - Electro-hydraulic lowering of the saw bow - Electro-hydraulic lifting of the saw bow - Electro-hydraulic opening of the vice

Kondisi: siap digunakan (bekas), fr Ndsdpfx Aajuciqaehef

Kondisi: baru, Ostas Hydraulic Profile Ring Bending Machine OPK 45 - 3 Special features included in the price: - 3 driven rolls - Digital display - Includes standard roller set for steel Description Hydraulic / motor-driven ring bending machine Nodpfx Aasg Tzbwohsdf Usable horizontally and vertically, with 3 powered rolls All 3 rolls are motor driven Upper roll adjustment is hydraulic Rolls are hardened Left/right rotation via foot pedal Roll shaft diameter: 50 mm Roll diameter (top): 158 mm Roll diameter (bottom): 158 mm Speed: 4.5 m/min Motor power: 0.75 + 1.5 kW Electrical connection: 400 V Complies with CE standard Weight: 420 kg

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2017, Scope of performance: 20mm–60mm, max. bending angle: 180°+10°, max. bending radius: 150mm, usable length: 3048mm, bending height: 1050mm, max. section modulus: 12.1cm³, bending tolerance: +/-0.1°, operating pressure: 200bar, connected load: 4kW, machine dimensions (L/W/H): approx. 2000mm/900mm/1200mm, weight: approx. 500kg. Documentation available. On-site inspection possible. Ndjdpfx Ajwg E Dhjahjf

Kondisi: baru, Tahun pembuatan: 2025, The CORMAK HBS320 is designed for double-sided miter cutting within a range from -45° to +60°. The machine’s construction is based on solutions and designs developed by Polish engineers. Precision and accuracy place it at the forefront among band saws capable of cutting up to 320 mm in width. A key advantage of the machine is its latest-generation hydraulic cylinder. The unit features a reinforced vise base and a quick-release vise mechanism. Machine features The CORMAK HBS320 metal band saw enables material cutting at any angle from -45° to +60°. The workpiece can be fed manually or by any feeding device. The feed during cutting is gravity-operated, utilizing oil flow in the hydraulic cylinder. The operator starts the machine by pressing the start button and sets the cutting speed. After completing the cycle, the machine stops automatically, and the operator raises the arm to the start position. The saw arm is made from a very robust, single-piece gray cast-iron casting. Together with the 27 mm-wide saw blade, it ensures consistent multi-series cutting of structural, stainless, and tool steels. The vise is set in an adjustable bed and equipped with a quick-clamp function. The blade guides use ball bearings and carbide inserts, ensuring exceptional accuracy and straightness of cut. This greatly influences blade tracking, longevity, and overall cutting quality. Carbide guidance significantly reduces both machine and blade wear. The base is a rigid welded body made from steel plates. Inside, there is a separate coolant tank with an electric pump. The upper part of the base is shaped as a tray for coolant drainage and chip collection during material cutting. The base is fitted with a cast-iron worktable with a double-sided pivoting arm and control panel. Feed speed is controlled from the machine’s panel. Two cutting blade speeds are available: 44 and 88 m/min. In the lower arm position–after the material is cut–the blade drive stops automatically. Safety is ensured by blade guards and micro-switches that stop the motor after a cutting cycle or when any safety guard is opened. Additional protection includes automatic shutdown if the blade breaks. Ndjdei D Dgwjpfx Aahsf Technical data Ø MAX – 260 mm (straight cut) H x W MAX – 320 x 160 mm (straight cut) POWER SUPPLY – 3-phase 400V TOTAL POWER – 1.5 kW ARM DESCENT CONTROL – Hydraulic cylinder BLADE DIMENSIONS – 2740 x 27 x 0.9 mm BLADE SPEED – 44 / 88 m/min VISE BASE HEIGHT – 920 mm DIMENSIONS – 1400 x 880 x 1550 mm WEIGHT – 280 kg Cutting parameters Angle 0º ----- ø260 320 x 160 255 x 255 45º R ø210 210 x 200 210 x 210 60º R ø135 135 x 130 130 x 130 45º L ø160 220 x 130 160 x 160 The listed price is NET. Price does not include shipping. For further information, please contact us by phone or email. Visit our website to browse our full offer.

Kondisi: baru, Cutting capacity at 90°: round 350 mm Cutting capacity at 90°: square 330 mm Cutting capacity at 90°: rectangular 450 x 320 mm Saw band length 4250 x 34 x 1.1 mm Band speed 40 + 80 m/min Table height 845 mm Saw band width 34 mm Total power requirement 2.2 kW Machine weight approx. 0.985 t Space requirement approx. 1.4 x 2.0 x 2.2 m Double mitre bandsaw, hydraulic semi-automatic, DGS 350/450 HA-I · Mitres left + right 60° without machine conversion · 34 mm saw band width · Large, ball-bearing turntable work support · Saw band guides positioned via extra wide linear guides · Powerful, robust gearbox · Large-area clamping plates Nedpefgyicofx Aahjdf · Infeed and outfeed roller · Removable chip tray (for cleaning/disinfection) · Freestanding control panel, safe and ergonomic · Storage space for bands and consumables · Cutting pressure regulator, feed regulator · Fully hydraulic vise · Super fast clamping (front loading) · Material height sensor (automatic cut start detection) Semi-automatic operation: 1. Clamp the material 2. Start the saw 3. Rapid lowering to material start or, for serial cutting, begin cutting immediately 4. Switch off saw band 5. Raise saw frame just above material 6. Open vise Optimal, material-independent cutting results thanks to fine adjustment of the saw frame using: * Pressure control valve (cutting pressure force) * Feed control valve (speed) * Switch with pictograms, simple and clear to operate

Kondisi: baru, Cutting capacity at 90°: round 305 mm Cutting capacity at 90°: square 260 mm Cutting capacity at 90°: rectangular 350 x 200 mm Saw band dimensions 3375 x 27 x 0.9 mm Band speed 37 + 74 m/min Table height 940 mm Total power requirement 1.5/1.8 kW Machine weight approx. 0.61 t Space requirement approx. 1.5 x 1.75 x 1.9 m Ndodpfx Aajfd Abaohef Double-mitre metal band saw with AutoCut function - Mitre cuts up to 60° left and 45° right - Ball-bearing rotary table - Side-shiftable vice - Heavy-duty, large material support - Automatic cooling system Image shows semi-automatic version.

Kondisi: bekas, nomor mesin/kendaraan: 51568, Pressure: 100 t Stroke: 0-500 mm Table area: 800 x 650 mm Ram area: 800 x 600 mm Through-hole in table: 355 mm Table height above floor: 800 mm Installation height: 1130 mm Approx. machine weight: 5.7 t Throat depth: 310 mm Space requirement approx. LxWxH: 1.2 x 2.0 x 3.67 m Installation height specified with stroke in upper position. Machine will be retrofitted to comply with new safety regulations: Safety distance: 270 mm / Overrun measurement 135 mm/s, overrun distance 44 mm. Njdpfecxxrrox Aahsdf