Bandsaw - Horizontal

MEP SHARK 332-1 SXI EVO

Cutting diameter 300 mm
Cutting capacity at 90°: flat 330 x 260 mm
Cutting capacity at 90°: square 260 x 260 mm
Cutting capacity at 45°: flat 270 x 200 mm
Cutting capacity at 45°: round 260 mm
Cutting capacity at 45°: square 250 x 250 mm
Cutting capacity at 60°: flat 170 x 170 mm
Cutting capacity at 60°: square 170 x 170 mm
Cutting capacity at 60°: round 180 mm
Blade speed range: 40 / 80 m/min
Bandsaw blade dimensions: 3320 x 27 x 0.9 mm
Motor power: 1.5 / 1.8 kW
Weight: 670 kg
Electro-hydraulic semi-automatic bandsaw SHARK 332 SXI EVO with semi-automatic, dynamic, manual function, equipped with MEP-28 control system for mitre cuts from 45° right to 60° left.

Some features:
- New centralized control panel on a swiveling arm.
- Low-voltage operating panel: Polyester membrane keypad with thermoformed raised buttons and operation control signal.
- Display shows:
* Diagnostics (messages in the user language)
* Alerts (description of alarm causes)
* Status of inputs and outputs
* Cut counter
* Time required for each cut
Bsdpfefg E H Usx Ad Rswr
* Bandsaw motor power consumption
* Bandsaw tension
* Bandsaw speed
* Numerical display of the saw head position
- Switch handle IP55 for manual 24V cycle.
- Comprehensive program of all special cutting cycles.
- Identification of other possible special cutting cycles for specific applications
- New next-generation hydraulic control unit, highly efficient and low energy consumption.
- Rotary table (mounted on 420 mm ball bearings with preloaded thrust bearing).
- Dual blade speed (40/80 m/min.) with control
- Prepared for the addition of an electronic inverter for stepless adjustment of blade speed from 20 to 90 m/min.
- Saw bow feed programmable directly from the control panel for adaptation to material.
- Vise unit laterally adjustable left and right, with quick-action vise.
- Hand-operated blade tension control with electronic converter display on screen.
- Machine base designed to completely collect coolant even at maximum mitre angles.
- Coolant pan (with electric pump for blade lubrication and cooling) and chip tray (can be replaced by a chip conveyor – see optional accessories) are integrated in the machine base.
- Prepared for installation of minimal blade lubrication kit (optional, in addition to the standard emulsion oil lubrication).
- Chip-cleaning brush.
- The machine is designed for pallet jack transport.
- Adjustable length stop for repeated cuts of equal length
- Material support arm with roller for attaching a loading platform
- Bimetal saw blade for solid and profile material.
- Tools and user manual in the respective user language.

Iklan ini diterjemahkan secara otomatis. Kesalahan terjemahan mungkin terjadi.