Mesin uji universal / mesin uji tarik

MFC Sensortechnik GmbH T1000 (10kN)

Tahun pembuatan: 2024, Kondisi: baru, nomor mesin/kendaraan: H3000-H5000TM,

Kondisi: bekas, Tahun pembuatan: 2007, Double spindle machining centre in 5-axis configuration (double-sided) Travel paths x/y/z = 600/600(975)/500 mm Dkodpstgu Ixjfx Aftsi Number of spindles: 2 Spindle distance: 600 mm Rapid traverse: 45 m/min Spindle speed up to: 17,500 rpm Drive power: 38 kW Tool magazine: 2 x 72 tool positions Tool holder: HSK 63 CNC control: Siemens 840D 1 x Tool breakage monitoring 2 x Clamping bridge supports H75 mm 2 x Clamping bridges 5th axis Coolant unit: Knoll, 70 bar 1 x Chip conveyor KB1000 1 x Drilling head indexing 2 x Tool flatness monitoring systems 2 x Retrofit kits for torsion compensation A-/U-axis

Kondisi: hampir baru (bekas), Tahun pembuatan: 2025, jam operasional: 2.000 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 1630, berat keseluruhan: 7.800 kg, masa garansi: 6 bulan, daya: 85 kW (115,57 hp), Complete production line for sale based on Di Più BRIK MB100 briquetting press (complete production line). General overhauled machine DI PIU BRIK MB100 (factory-refurbished in 2025), ready for immediate operation. The machine is designed for high-capacity briquetting and is suitable for demanding industrial applications. The machine has approximately 2,000 operating hours. The unit was recently overhauled at the Di Piu factory, where all vital parts, cables, wiring, and necessary electrical components were replaced. As a result, the machine is as good as new and comes with a 6-month factory warranty from Di Piu. Dodpfx Afswrp Emotjki The machine can produce briquettes with or without a hole, 90mm to 110mm in diameter, from softwood or hardwood, round or square. Inspection is possible at the Di Più factory in Italy: Di Più Systems Srl, Via dell’Innovazione 11, 36042 Breganze (VI), Italy. The Di Più BRIK MB100 mechanical briquetting press is an automatic machine for compressing wood, sawdust, and other waste materials into wood briquettes. Ideal input material moisture content: 8% – 12%, particle size: 1 mm – 12 mm. Technical data: -Production capacity: 1,300 – 2,300 kg/h (with sawdust density of 160–200 kg/m³) -Briquette diameter: 90 – 110 mm -Main motor power: 75 kW -Total installed power: 98 kW -Piston compression pressure: 2,000 – 2,500 kg/cm² -Vertical auger with gear unit: 5.5 kW -Oil pump: 1.5 kW -Oil pump for closing extrusion head: 1.5 kW -Feeder with auger and adjustable speed: 1.5 kW -Oil lubrication system for bronze bearings: 100 liters -Briquette output monitoring sensor (automatic shutdown if the material runs out) -Safety covers for moving parts -Oil pressure sensor -Control cabinet -Buffer hopper for input material (accumulator) -Level sensor for feed system monitoring -Machine weight: approx. 7,800 kg The machine is equipped with all necessary accessories for full operation and integration into a briquetting line: ADDITIONAL EQUIPMENT – MB100: - Dosing silo: Heavy-duty steel construction. Diameter: 1,500 mm, height: 1,000 mm. Equipped with rotary cutter with 2.2 kW geared motor, mounted on robust steel frame. Material feeding controlled by level sensor. - Post-extrusion briquette cooling line, total length 20 meters - Automatic briquette saw - The saw automatically cuts the briquettes to lengths preset by the operator. - Device for producing briquettes with a hole - Head-cooling system with ice water - The system produces 50 liters/minute of ice water for efficient briquetting head cooling. - Air-cooled water chiller with hermetic scroll compressors, microprocessor control, and large energy storage tank holding the immersed water-coolant heat exchanger. - The heat exchanger is a high-efficiency “fin-pack” type, made from copper pipes and aluminum fins. - Water tank capacity: 800 liters - Water supply pump (50 l/min – 20 mWc – 0.55 kW) with three-way DN25 valves for adjusting coolant temperature in the briquetting head. - Digital electronic temperature controller with NTC sensor (probe d.6 × 52 mm, IP68, AISI 316). ADDITIONAL: NOVAPAC Wrapper Option to purchase a NOVAPAC wrapper, fully compatible with Di Più BRIK MB100 and other machines, an ideal solution for automatic packaging immediately after compression. Year: 2013 Price for Novapac: €19,000 Equipment shown in the last 6 images.

Tahun pembuatan: 2018, Kondisi: baik (bekas), Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: H3000TM, Universal Testing Machine H3000TM Made in Germany Crosshead Travel: 520 mm Working Depth: 66 mm Overall Height: 1010 mm Weight: 45 kg Test Speed: 1 to 500 mm/min Return Speed: 500 mm/min Travel Resolution: 0.01 mm We offer a wide selection of grips: screw clamps, wedge grips, pneumatic and hydraulic grips. Compression plates, bending fixtures, friction coefficient fixtures, and much more. Extensometers, long-travel transducers, clip-on extensometers, climate chambers. Load cells selectable in 50N, 100N, 200N, 500N, 1000N, 2000N or 3000N versions. Includes Hess software for Windows 8, 9, 10, or 11 for universal testing procedures, simple testing also possible without a PC, and one 5kN SP 56g screw grip with pyramid or rubber jaws 30x50 mm. Factory calibration certificate with DAkkS-calibrated measuring devices. Calibration for both tensile and compression modes in 10 steps. The H3000TM series universal testing machine is a single-spindle machine with a robust aluminum and stainless-steel (V2A) frame equipped with recirculating ball screws, linear ball bearings, and belt drive. The bellows cover protects spindle and guides. The testing machine is microprocessor-controlled and equipped with a membrane keypad. The two-line LCD display shows force and travel values. The machine can be operated as a standalone unit or connected to a PC via USB interface. Travel is measured by an encoder with 0.01 mm visible resolution on the LCD (internal 0.0001 mm). The machine comes with a standard load cell: 0.03% linearity and corresponding calibration. An optional second channel allows for an additional load cell or displacement transducer. The universal testing machine is available with two different travel distances: 500 mm or 1200 mm (with load cell, without test fixtures). Scope of delivery: One load cell of your choice (50N, 100N, 200N, 500N, 1000N, 2000N or 3000N), certificate, 220V power cable, USB cable, user manual, and CE declaration of conformity. Dksdpfx Ast Rg H Asftei Load Cell 3000N Measuring Range: 1-3000N (tension and compression), with nominal 2mV/V output signal Overload Protection: +/-100%, Linearity: +/-0.05%, Hysteresis: +/-0.03%, Repeatability: +/-0.02%, including 1.5 m connection cable and calibration certificate.

Kondisi: baru, Bandsaw Bernardo HBS 460 N - 400 V Technical Specifications Cutting width: 465 mm Cutting height: 280 mm Saw blade dimensions: 3607 x 25 x 0.6 - 3 TPI Saw blade widths: 9.5 - 25.4 mm Cutting speeds: 420 / 840 m/min Table dimensions: 480 x 630 mm Table height: 970 mm Saw table tilt: -5° to 45° Extraction port diameter: 2 x 100 mm Motor output (S1 100%): 2.2 kW (3.0 HP) Motor input (S6 40%): 3.0 kW (4.0 HP) Voltage: 400 V Machine dimensions (W x D x H): 1050 x 800 x 1950 mm Weight: approx. 162 kg Scope of delivery • Saw blade • Rip fence with magnifier • Mitre gauge • Aluminium drive wheels Dksdpfx Afed N S Uretei • Ball-bearing saw blade guides • Motor including brake • Push stick • Operating tools

Tahun pembuatan: 2022, Kondisi: seperti baru (mesin pameran), Fungsionalitas: berfungsi sepenuhnya, FTIR spectrometer for sale - NICOLET IS20 MID-IR DTGS spectrometer, which was used for one year as part of a research project. Operated in a laboratory environment; no damage. Scope of delivery: Dkodpfx Aferklx Ijtoi 1x NICOLET IS20 MID-IR DTGS spectrometer 1x IS20 German device labeling 1x European Schuko plug, 250V 1x ATR ITX Base 1x AR diamond crystal for Smart iTX ATR 1x COMP-U-16 upgrade from 20" monitor to 24" monitor 1x iS10-iS20 transmission accessory 1x ST JAPAN ATR-FTIR Polymer Bundle 1x DELL OPTIPLEX 3090 MT - i3-10105 8GB Original price: €31,998.77 Sale EXW, as is

Tahun pembuatan: 2010, Kondisi: siap digunakan (bekas), Electrode force: 100 daN, welding power: 255 kVA, rated power: 80 kVA, with DALEX DRF 5.2 cooling system. Dksdpfxeiknv Ee Aftoi

Kondisi: bekas, Tahun pembuatan: 1965, Maximum core drilling diameter: 50 mm Drilling depth: 2,000 mm Swing diameter: mm Maximum drilling diameter: 110 mm Total power requirement: 30 kW Machine weight: approx. 10 t Year of manufacture: 1965 Overhauled: 2000 Drilling diameter: - Solid drilling approx. 2 - 50 mm - Boring approx. 100 mm Maximum drilling depth: 1,600 / optionally up to 2,000 mm (see stroke/installation length) Stroke of drilling carriage: approx. 4,000 mm Distance between the two spindle heads: 5,000 mm Centre height above guideway: 350/450 mm Drilling feed of the drilling carriage, stepless: 20 - 200 mm/min Rapid traverse of the drilling carriage: 2,500 mm/min Workpiece speeds via belt drive: 260 - 650 / 650 - 1,625 rpm Work spindle drive: 24 kW Coolant pump drives: 1 x 7.5/15 kW, 1 x 15/28 kW Total drive approx. 60 kW, 380 V - 50 Hz Dkodpjt Hwucsfx Aftei Total machine/guideway length: 7,500 / 5,000 mm Total weight: approx. 10,000 kg Accessories / Special configuration: - The machine consists of the following elements: The main spindle on the left, followed by a BOZA, a table unit powered by a ball screw, BOZA with increased centre height, and at the end, a spindle head of the B 16 series with drive motor approx. 7.5 kW, n = 900/2,400 and 2,400/6,000 rpm; very large and complex coolant system with filter unit, extensive accessories and drilling tools up to 100 mm Ø - Suitable for rotating workpieces/fixed drilling tools (ELB and BTA methods), as well as for stationary workpieces and rotating drilling tools. It can operate with internal oil supply (ELB) or external oil supply (BTA). - Complete coolant oil system with tank and filter, 2 high-pressure pumps by SIG, adjustable flow rate: 17/40/120 or 220/500 litres/min, tank capacity approx. 2,500 litres - Feed of the main carriage via ball screw and infinitely variable DC motor. The main carriage currently holds a cross-adjustable table (approx. 500 mm adjustment, table size approx. 800 x 800 mm) for accommodating cubic and cylindrical workpieces. Electrically controlled via a cam track (approx. 2,500 mm) and limit switches for rapid traverse, feed, and return. - 2 closed 3-point steady rests, FORKHARDT 3-jaw manual chuck, approx. 315 mm Ø - Modernised control panel with speed display, feed adjustment and display, kW display, feed/rapid traverse switching (left/right), etc. - 2 separate switch cabinets, separate BoZa, sleeves, reducers, clamping aids, and much more. Condition: Good – demonstration ready shortly. Due to the accessories, the machine is very valuable. Delivery: ex stock – as inspected Payment: strictly net – upon receipt of invoice Further deep hole drilling machines always in stock – please enquire.

Kondisi: baru, Tahun pembuatan: 2025, punktschweissmaschine-vorfuehrmaschine-2025 Djdpsh Nu A Nofx Aftjki

Kondisi: bekas, Tahun pembuatan: 2007, Swing diameter 640 mm Maximum turning diameter 640 mm Control system: Siemens 840 D Powerline ----- Main spindle ----- Bar capacity: 65 mm Chuck diameter: 200 - 315 mm Spindle bore diameter: 80 mm Main spindle bearing diameter (front): 120 mm ----- Sub spindle ----- Bar capacity: 65 mm Chuck diameter: 315 mm Spindle bore diameter: 80 mm Front bearing diameter: 120 mm ----- General data ----- Center distance: 1,500 mm Turning length: 1,185 mm Main/sub spindle speed: 5,000 rpm Driven tool speed: 12,000 rpm Slide travel X1/Y1: 550 / 180 mm Slide travel Z1: 1,185 mm Slide travel B1: 240° Slide travel X2: 180 mm Slide travel Z2: 1,050 mm Dkedpfovx U A Sox Aftei Slide travel Z3: 1,150 mm CNC Turning and Milling Center | DMG GILDEMEISTER - GMX 250 linear with main and sub spindle, chip conveyor, tool changer, turret configured for driven tools and equipped with a gantry loading system (Pneumotec gantry system S-01623a). The machine has only approx. 32,000 operating hours. The machine is in very good condition and can be inspected. #Tags: GMX250linear | GMX-250 linear | GMX 250linear | GMX-250linear