Alat mesin penggilingan

Mikron WF 3 DP

Kondisi: sangat baik (bekas), MIKRON WF 3 DP Universal Milling Machine TECHNICAL DATA Swivel Table Clamping surface: 450 x 800 mm Number of T-slots: 9 T-slot pitch: 45 mm Weight: 144 kg Machine dimensions: 1475 x 1770 x 2000 mm Weight: 1800 kg Connected load: 8.7 kW Milling Spindle Drive Gedslnfggspfx Aaxjkd Spindle speeds: 21 steps Speed range: 25 – 2500 rpm Step ratio: 1.258 Spindle motor power: 3.3 / 4.0 kW Tool holder: ISO 40 / M16 Quill travel, vertical: 110 mm Feed Drive Feeds in all 3 axes: Infinitely variable Feed range: 1 – 2000 mm/min Rapid traverse in all feed directions: 3000 mm/min Motor torque Longitudinal + cross: 4 Nm Vertical: 8 Nm Travels Longitudinal travel of clamping table (X-axis): Automatic: 400 mm Cross travel of clamping table (Y-axis): Automatic: 400 mm Vertical travel of clamping table (Z-axis): Automatic: 385 mm No guarantee is given for the accuracy, completeness or currency of the information provided.

Kondisi: baru, Cutting capacity at 90°: round 350 mm Cutting capacity at 90°: square 330 mm Cutting capacity at 90°: rectangular 450 x 320 mm Saw band length 4250 x 34 x 1.1 mm Band speed 40 + 80 m/min Table height 845 mm Saw band width 34 mm Total power requirement 2.2 kW Machine weight approx. 0.985 t Space requirement approx. 1.4 x 2.0 x 2.2 m Double mitre bandsaw, hydraulic semi-automatic, DGS 350/450 HA-I · Mitres left + right 60° without machine conversion · 34 mm saw band width · Large, ball-bearing turntable work support Gkjdpfxsfgyico Aaxsd · Saw band guides positioned via extra wide linear guides · Powerful, robust gearbox · Large-area clamping plates · Infeed and outfeed roller · Removable chip tray (for cleaning/disinfection) · Freestanding control panel, safe and ergonomic · Storage space for bands and consumables · Cutting pressure regulator, feed regulator · Fully hydraulic vise · Super fast clamping (front loading) · Material height sensor (automatic cut start detection) Semi-automatic operation: 1. Clamp the material 2. Start the saw 3. Rapid lowering to material start or, for serial cutting, begin cutting immediately 4. Switch off saw band 5. Raise saw frame just above material 6. Open vise Optimal, material-independent cutting results thanks to fine adjustment of the saw frame using: * Pressure control valve (cutting pressure force) * Feed control valve (speed) * Switch with pictograms, simple and clear to operate

Kondisi: bekas, Tahun pembuatan: 1980, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 956.71.80.274, panjang pemakanan sumbu X: 600 mm, panjang umpan sumbu Y: 500 mm, panjang umpan sumbu Z: 400 mm, jarak pergerakan sumbu X: 600 mm, jarak lintasan sumbu Y: 500 mm, jarak gerak sumbu Z: 400 mm, tegangan masuk: 400 V, Perlengkapan: dokumentasi / manual, The machine shown is in excellent condition and ready for immediate use. No heavy roughing operations have ever been performed with this machine. The machine is sold together with a vise, including the tool cabinet with the contents as shown. Gkedownq Sgjpfx Aaxod Additionally included are 2 sets of ground parallels, as well as approximately 80 cutters, all in usable condition (some barely used), some like new, mostly with solid carbide coating, suitable for machining steel and aluminum.

Kondisi: baik (bekas), Fungsionalitas: berfungsi sepenuhnya, 1 used universal milling machine Manufacturer: Mikron Model: WF 2/3 DP with Heidenhain Type 135 path control Travel (X/Y/Z): 400 / 410 / 400 mm Table clamping surface: 800 x 450 mm Spindle speed: 30 – 2240 rpm Feed rates: 1 - 750 mm/min Rapid traverse: 2000 mm/min Tool taper: ISO 40 Machine weight approx.: 1.4 t Space requirements approx.: 2.1 x 1.6 x 2.2 m Gkjdpfx Aajv N Dzfoxjd

Kondisi: bekas, Swing diameter over bed: 250 mm Swing diameter over cross slide: . mm Distance between centers: approx. 400 mm Center height: approx. 125 mm Spindle speed range: 80 – 3,000 rpm Number of speed steps: 18 Spindle bore: 24 mm Tailstock quill taper: MT 3 Weight: approx. 400 kg Dimensions (L x W x H): approx. 1,200 x 650 x 1,300 mm Gsdpfx Aewa Dz Esaxskd Four-jaw chuck diameter: 125 mm Including Röhm four-jaw chuck, Ø 125 mm with drilling and turning jaws; Collet chuck device incl. collets 1–20 mm in 1 mm increments; Multifix size A with 3 quick-change tool holders; Chuck guard with safety interlock

Kondisi: bekas, Tahun pembuatan: 1980, X-travel: 500 mm y-travel: 500 mm z-travel: 400 mm Spindle speed range: 30 – 2240 rpm Infinitely variable feed: 1 – 750 mm/min Rapid traverse: 1500 mm/min Table clamping surface: 400 x 800 mm Tool holder: SK 40 Total power requirement: 7.8 kW Machine weight approx.: 1.8 t Gjdpfx Aocxxq Deaxokd Space requirement approx.: 2.1 x 1.6 x 2.2 m Heidenhain TNC 131 control, tilting device for vertical head, coolant system, separate drives for each feed spindle, automatic hydraulic clamping of all axes; the working axis is automatically released, all axes can be released for manual operation.

Kondisi: bekas, Tahun pembuatan: 1988, Travel path x: 310 mm Gkodpet Hxatjfx Aaxed y: 340 mm z: 170 mm Total power requirement: 2.5 kW Machine weight approx.: 900 kg Required space approx.: m M A C M O N Universal Tool Milling Machine with HEIDENHAIN 3-axis digital readout Type M 100 D Year of manufacture: 1988 Serial No.: 1536 Table travels: - longitudinal, motor/manual: 290 / 310 mm - vertical, motor/manual: 310 / 340 mm Cross travel of milling slide, manual: 170 mm Fixed angle table: 215 x 600 mm Vertical head swiveling: 360° Quill stroke vertical head: 70 mm Installation height under spindle: 350 mm - Overhang of vertical spindle: approx. 100 - 320 mm Spindle taper: SK 40 21 vertical spindle speeds: 50 - 2,500 rpm Horizontal: 40 – 2,000 rpm Feed range (stepped): 9 – 450 mm/min Spindle drive: 2.2 kW Total drive: 2.5 kW - 380 V - 50 Hz Weight: 900 kg Accessories / Special Features: • 3-axis HEIDENHAIN digital readout • Modern design selector wheels for feed and spindle speed (no levers) • Fixed angle table approx. 215 x 600 mm mounted • Machine light, swiveling chip guard • Equipped with a movable vertical milling head ISO 40, quill stroke 70 mm • Control cabinet mounted on machine, integrated coolant system, chip tray, various arbor holders, etc. Condition: good – ready for demonstration, ideal for training workshop/education Delivery: ex stock – as inspected Payment: strictly net – on receipt of invoice

Kondisi: sangat baik (bekas), Tahun pembuatan: 1986, jarak pergerakan sumbu X: 300 mm, jarak lintasan sumbu Y: 160 mm, jarak gerak sumbu Z: 290 mm, Year of manufacture: 1986 Travel distances: X = 300 mm Y = 160 mm Z = 290 mm Equipment: - Standard accessories - Vertical milling head, SK 40/20x2 - Fixed angle table 210 x 600 mm, NEW! - Retrofit safety device for milling spindle, electrically secured, NEW! Gedpfx Ajwgafyeaxjkd - Active digital display (TNC113), 3 axes - Coolant system - Machine lamp - Machine feet - Documentation Condition: Good, mechanics and control system workshop-tested

Kondisi: bekas, Tahun pembuatan: 1982, nomor mesin/kendaraan: 18613, KUNZMANN Universal Tool Milling Machine Model UF 6 NR Year of manufacture: 1982, 2 gearbox speeds 1400/2800 rpm Table size: 860 x 240 mm, 3 T-slots 14 mm, spindle taper SK30 Gkjdpfx Aeiqkc Ioaxjd Travel distances (X/Y/Z): 450/200/430 mm, horizontal speeds: 18 steps from 32 to 1342 rpm, vertical speeds: 18 steps from 72 to 2988 rpm, 12 feeds on the X-axis, separate coolant tank, chip tray, machine lamp, 3 horizontal milling arbors each with cutter, 2 overhead support arbor brackets, 1 collet chuck with key, 1 machine vice with handle.

Kondisi: baik (bekas), Tahun pembuatan: 2000, Weiler Primus VC, year of manufacture 2000, digital readout, centre distance 500 mm, max. swing over cross slide 150 mm, spindle speed up to 4,000 rpm, spindle bore 40 mm, spindle drive 1.5 kW, Multifix tool holder, 24 longitudinal feeds, metric threads, imperial threads, Gsdpfxjv Ifxio Aaxskd