Robot industri

Mitsubishi RV-7FL-D1-S15

Kondisi: bekas, Tahun pembuatan: 2008, Vertical Turning and Grinding Center Manufacturer: EMAG Model: VSC 250 DS Year of manufacture: 2008 Control system: SIEMENS 840D Grinding spindle speed: 30,000 rpm Turning spindle speed: 3,000 rpm Turret tool stations: 12 Chiller unit for spindle and machine bed cooling Coolant lifting station (no independent coolant supply) Chip conveyor Parts handling Air through spindle Two clamping circuits through spindle (air and oil) Please note: The grinding spindle is defective but can be overhauled at a spindle repair facility. Apart from that, the machine is in very good condition and fully functional. Laodpoia Rtdefx Adwji Please contact us for further information and pictures via mail(at) or *

Kondisi: bekas, Tahun pembuatan: 1996, Grinding length: 600 mm Grinding width: 250 mm Workpiece height approx. 385 mm Clamping surface of table: 600 x 200 mm Table speed - stepless: 2 - 35 m/min Maximum table load: 250 kg Grinding wheel dimensions: ø 225 x 25 mm Grinding wheel bore: 50.8 mm Vertical feed, automatic: 0.001 - 0.099 mm Rapid vertical traverse: 600 mm/min Table cross feed, continuous: 10 - 1000 mm/min Rapid cross traverse: 1000 mm/min Total power requirement: 6 kVA Laodpst Tqrnofx Adwei Machine dimensions L x W x H: 2.65 x 1.70 x 2.28 m Accessories: Digital readout on Y and Z axes, magnetic chuck 600 x 200 mm, grinding wheel with flange, wheel dressing device, wet grinding system with paper band filter.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2016, Takisawa TMM 250 3 turning-milling center, year 2016, Fanuc control Turning length: 1300 mm Turning diameter: 350 mm Maximum spindle speed: 4000 rpm 9 axes 2 x spindles 2 x C-axes Swing diameter: 780 mm Maximum turning diameter: 350 mm Maximum turning length: 1,300 mm Left chuck diameter: 250 mm Right chuck diameter: 200 mm Upper tool carrier with Y-axis (260 mm) and B-axis (230° / ±115°) Lodpsrt Ip Nefx Adwoai Complete with 30-position tool changer Lower tool turret with 15 driven positions – all stations powered Fully simultaneous 5-axis machining with turning/milling capability Tool changer with 30 tool stations Workpiece magazine positioned on the right side of the machine, portal handling Driven tools on the turret C-axis on left and right spindle Chip conveyor Internal coolant supply through the milling spindle, 20 bar Due to administrative reasons (customs regulations), we do not deliver to Turkey, Iran, Russia, or Belarus.

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 1992, Fungsionalitas: berfungsi sepenuhnya, tinggi pusat: 150 mm, panjang penggilingan: 620 mm, lebar di tengah: 680 mm, diameter roda gerinda: 350 mm, lebar total: 500 mm, Condition of the machine: The machine is currently in a used, non-refurbished condition. The following work will be carried out on the machine: - Complete disassembly of the entire machine down to the guideways - Replacement of all seals and wear parts throughout the entire machine - Replacement of the X-axis feed screw - Replacement of the main bearings of the workpiece spindle - Replacement of the grinding spindle Ledsrz Nfljpfx Adwoai - All assemblies of the machine will be restored to a like-new condition Geometry: - Hand-scraping of the X-axis guideway - Hand-scraping of the Z-axis guideway - Grinding of the X-axis table - Grinding of the Z-axis table - Grinding of the upper tables - Grinding of the assembly housings (workpiece spindle headstock, grinding spindle headstock, and tailstock) - Preparation of a measuring protocol for TSCHUDIN cylindrical grinding machine Painting: The main assemblies will be repainted, the rest of the machine retains its original paintwork Electronics: The complete electronics of the machine will be checked and tested, and defective switches and cables will be replaced

Kondisi: baik (bekas), Tahun pembuatan: 2011, Robot industri Pabrikan: Kuka Tipe: KR30-3 Tahun pembuatan: 2011 Jangkauan: 2.033 mm Berat: 665 kg Kapasitas angkat: 30 kg Kontrol Kuka KRC4 Berat: 150 kg Perangkat lunak V8.3.40 Ledpsi Ezv Njfx Adwsai Panel sentuh Kuka Kabel penghubung Kuka

Kondisi: baik (bekas), Tahun pembuatan: 2014, Robot industri Pabrikan: Kuka Tipe: KR60L30-3 Tahun produksi: 2014 Sekitar 15.600 jam operasi Jangkauan: 2429 mm Berat: 665 kg Daya angkut: 30 kg Sistem kontrol Kuka KRC4 Berat: 150 kg Perangkat lunak: V8.3.40 Panel sentuh Kuka Kabel koneksi Kuka 41125ä Laedpfon Uv Diex Adwei

Kondisi: hampir baru (bekas), Tahun pembuatan: 2021, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: F21/0023666, Perlengkapan: dokumentasi / manual, Technical specifications: Maximum load: 20 kg Rated load: 7 kg Reach: 1000 mm Number of axes: 6 Repeatability according to ISO 9283: ± 0.03 mm Pneumatic interface: 2 direct lines between base and forearm 2x 5/2-way bistable solenoid valves (compressed air) Electrical interface on the arm: 17 electrical I/O lines Lsdjpd In Djpfx Adwjai Multi-bus cable in the arm: 13 electrical lines, 4 multi-bus Cat5e lines, DIN M12 Standards and protection ratings: Cleanroom standard – ISO 14644-1: Class 5 Protection class (wrist): IP65 (*IP67) Safety: Absolute encoders up to SIL3-PLe class ensure the highest safety levels. Control and licensing: CS9 controller with VAL3 license Controller power supply: 3x400-480V-50/60Hz Other equipment: Operating panel (with 5m cable) This robot not only offers impressive technical parameters but also ensures the highest safety standards thanks to SIL3-PLe class encoders. With a wide range of applications and precise repeatability, it is ideal for various industrial purposes. For further information or a tour, please contact us by email or phone (in English). We are happy to answer your questions and look forward to your inquiry.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2007, kapasitas angkut: 5 kg, jangkauan lengan: 704 mm, Fanuc LR Mate 200 iC Robot (E-29388) with Cell Vision System Country of origin: Japan Lodjqgck Dspfx Adweai Year: 2007 Controller: R-30iA MATE Number of axes: 6 Payload capacity: 5 kg Reach: 704 mm Repeatability: ±0.02 mm Robot weight: 27 kg Camera: Sony XC-56

Kondisi: baik (bekas), For sale is an external cylindrical grinding machine from VEB Werkzeugmaschinenbau, model SU 200/1x800. The machine is fully functional and ready for immediate use. Technical Data: - Grinding diameter: 200 mm - Grinding length: 800 mm - Swing diameter: approx. 160 mm - Headstock speed: 200–1000 rpm - Headstock taper: MK2 - Grinding wheel diameter: approx. 330 mm - Table size: 900 x 200 mm - Dimensions: 3050 x 1300 x 1430 mm - Weight: 4.6 t On request and for an additional fee, loading and transport (Europe-wide) can be arranged. Lodpfx Adordf Hgjweai All prices are plus VAT. Inspection possible by appointment. Please contact us—our team will be happy to assist you. Trade-in or exchange is possible! Machinery Buying / Selling PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MORE. Do you require a high-quality yet affordable metalworking machine for your production? Or do you wish to sell yours? For further information or contact options, please visit our website.

Kondisi: hampir baru (bekas), Tahun pembuatan: 2017, jam operasional: 4.500 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: F17/5EWVB1, berat keseluruhan: 350 kg, kapasitas angkut: 30 kg, jangkauan lengan: 1.700 mm, I am offering the option to equip the Stäubli RX160 robot with a uniVal Drive. The robot is in near-new condition, with only 4,500 driven operating hours. See photo. Lajdper Dvd Iofx Adwei Maximum payload: 30 kg Rated payload: 20 kg Reach (between axis 1 and 6): 1,710 mm Number of axes: 6 Repeatability – ISO 9283: ±0.05 mm Controller: Stäubli CS8C series Weight: 248 kg