Kapal udara

Mittweida 500

Kondisi: bekas, Tahun pembuatan: 2015, nomor mesin/kendaraan: A2536805, Pressure: 40 t Stroke: 250 mm Retracting Force: 6.3 t Motor: 5.5 kW Max. Working Height: 450 mm Max. Approach Speed: 90 mm/sec Pressing Speed: 10 mm/sec Travel Distance (w): 250 mm Ram Plate: 500 x 200 mm Table Plate: 600 x 650 mm with T-slots Table Cut-out: 200 x 170 mm Table Height: 850 mm Oil Tank: 200 l The described machine can be custom-built for you. Production time is approximately 5 months from receipt of payment. Approach: The press moves to the zero point at up to 90 mm/second. The positioning accuracy is 0.5 mm or better. Return: The press moves back to the end point at up to 90 mm/second. The accuracy here is 0.5 mm or better. The dwell time is adjustable from 0 to 10 seconds (in increments of 0.1 seconds). The press force can be adjusted between 10 and 40 tons (in bar). Ihjdpfefxyhfjx Aa Njt Further control details: The control system can be locked with a key switch. The key switch for the control system has the following functions: - Manual operation via two-hand control at 9.5 mm/sec in setup mode. (Stops at any desired position when the switches are released.) - Manual operation for bending tasks at up to 9.5 mm/sec using two-hand control and automatic return to top dead center when both two-hand buttons are released. - Automatic operation with secure tooling at up to 200 mm/sec. This function is labeled with a warning on the control panel. In automatic mode, the machine may only be used with fully enclosed, secure tooling—this information is clearly displayed on the front of the machine. In manual setup mode, the machine can also be operated via the two-hand control at a maximum of 9.5 mm/sec. Bending operations can also be performed in setup mode. A key selector switch is used to toggle between automatic and manual operation. Position adjustment for top and bottom dead center as well as switching position for speed reduction is managed via sensors that are adjustable on a chrome-plated rod. A clamping thread allows for fine sensor adjustment—accuracy is +/- 0.5 mm. The press can be equipped with a bending blade and, using the two-hand control, can perform sheet metal bending as well as punching, notching, and bending in automatic mode with secure tooling.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2018, jam operasional: 100 h, Kami berspesialisasi dalam rekondisi blower, kompresor, dan pompa vakum. Kami memperbaiki peralatan dari produsen seperti: Aerzen, Kaeser, Atlas Copco, Robuschi, Busch, Tuthill. Kami juga menawarkan layanan sewa blower dan kompresor. Kami beroperasi di seluruh Eropa dan sekitarnya. Isdpfx Aaon Tntqj Nsht

Tahun pembuatan: 2004, Kondisi: baik (bekas), nomor mesin/kendaraan: 0441057, Offer 23300 Technical Specifications: - Abrasive belt dimensions: 75 x 2000 mm - Surface grinding opening: 75 x 300 mm - Adjustable-angle support vise: 90° to 30° Ihjdpepug D Esfx Aa Not - Belt speed: 15 + 30 m/sec - Possible contact wheel diameters: 20 - 76 mm - Contact wheel length: 75 mm - Drive: 400 V / 2.2 / 3 kW - Drive speeds: 1440 / 2880 rpm - 1 piece contact wheel: 48 mm - Required floor space (approx.): W 800 x H 1000 x D 1300 mm - Weight (approx.): 250 kg

Kondisi: bekas, Tahun pembuatan: 2018, jam operasional: 3.550 h, Fungsionalitas: berfungsi sepenuhnya, Used machine Year of manufacture: 2018 Technical specifications Max. working width: 1100 mm Abrasive belt dimensions (W x L): 1130 x 1900 mm Brush diameter: 300 mm Table opening: 0 – 100 mm Speed 1st unit, frequency controlled: 5 - 15 m/sec 2nd unit, frequency controlled: 6 - 17 m/sec Feed speed, frequency controlled: 0.2 - 8 m/min Electricity Main motor 1st unit - W: 7.5 kW Main motor 2nd unit – RB: 1.0 kW Main motor brushes: 2 x 1.5 kW (3 kW) Main motor 3rd unit - W: 7.5 kW Feed motor: 1.5 kW Vacuum pump: 4 kW Electrical connection: 400 Volt Frequency: 50 Hz Control voltage: 24 V Required air pressure: 6 bar Air consumption: 45 l/min Dust extraction per unit Required output at 100 mm WS: 6,100 m3/h Machine weight: 3,750 kg Accessories / Special equipment Ihodpfx Asx I Ed Rja Njt Extension table: approx. 400 mm with 2 rollers Feed belt cleaning brush Including used wet extraction system Ulmatec NAS 6200-3 7.5 kW Year of manufacture: 2018 - Including H14 filter - Including ATEX version for aluminum - Including sludge container

Kondisi: baik (bekas), Tahun pembuatan: 1969, Pneumatic gluing press, max. pressure 10 bar, heated gluing beam, bonding area 550 x 40 mm, infinitely variable temperature control for both upper and lower gluing beam from 0 - 300 °C, stepless adjustment of bonding hold time, drive power: 5 kW, 380 Volt-50 Hz, two-hand operation by SIEMENS. Pressure build-up via toggle lever, max. opening stroke approx. 30 mm. Ihedpsd Dxqbefx Aa Njt

Kondisi: baik (bekas), Plasma cutting unit, plasma cutter - Equipment: without torch package Iodob A Innjpfx Aa Nsht - Cooling: water-cooled - Maximum cutting current: 70 A - Mains voltage: 3x400V

Kondisi: baik (bekas), Tahun pembuatan: 1995, 24315 Ihedpfot Stfhjx Aa Not Technical Data: - Abrasive belt dimensions: 2000 x 100 mm - Surface grinding opening: 400 x 100 mm - Support vice – angle adjustable: 90° to 30° - Fine adjustment of support via handwheels - Abrasive belt speed: 30 m/sec - Contact wheel / grinding roller: Ø 42 mm - Drive: 400 V / 2880 rpm / 3 kW - Space requirement: approx. W 700 x H 1200 x D 1200 mm - Weight: approx. 225 kg - 10 contact grinding rollers approx. Ø 10 + 18 + 22 + 24 mm, 28 + 33 + 36 + 48 + 60 + 68 mm

Kondisi: bekas, Glaser flat steel bender HAWE HC4L/3.0 hydraulic see pictures Ihodpfx Aou Da Afoa Nst

Kondisi: baik (bekas), Thread cutting machine with steel jaws, thread cutting head Ihjdpfx Ajb A Ncusa Not - Chuck diameter: 190 mm - Size: 1/2 - 2 inch - Weight: 130 kg

Kondisi: siap digunakan (bekas), Mesin Elgo CNC, sangat mudah dan ramah pengguna Kapasitas pipa maks: diameter 76 mm x 4 mm tebal Pipa kotak maks: 70 x 70 mm Radius maks: 600 mm Sudut tekuk: 180° Mata alat standar 3D Mata alat khusus sesuai permintaan Panjang: 1200 mm Ihodpfjxpghqex Aa Not Lebar: 800 mm Tinggi: 1300 mm